| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Before calling the post-commit hook, the variable "pc_err" is cleared
while later only "pch_error" is used. "pch_error$cmt_id" only appeared in
"upvar"-Statements (which were changed to "global") and was removed.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
As pointed out in msysgit bug #181, when a non-locale encoding is
used for commits, post-commit status messages display the subject
incorrectly. It happens because the file handle is not properly
configured before the subject is read back.
This patch fixes it by factoring out the code that is used to setup
the output handle into a separate function, and calling it from
the reading code.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Acked-by: Robin Rosenberg <robin.rosenberg@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Commits without an encoding header are supposed to
be encoded in utf8. While this apparently hasn't always
been the case, currently it is the active convention, so
it is better to follow it; otherwise people who have to
use commitEncoding on their machines are unable to read
utf-8 commits made by others.
I also think that it is preferrable to display the warning
about an unsupported value of commitEncoding more prominently,
because this condition may lead to surprising behavior and,
eventually, to loss of data.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
- Make citool return nonzero exit code if it did not commit.
- Add a mode where it does not actually commit and simply
exits with zero code. Commit message is either disabled,
or simply dumped to GITGUI_EDITMSG before exiting.
- Add an option to immediately start it in amend mode.
Rationale:
1) Use 'git citool --nocommit' instead of mergetool in scripts.
2) Use 'git citool --amend' to edit commits while rebasing.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Support _U (local deleted, remote modified) and
UT (file type changed in conflict) modes.
Note that 'file type changed' does not refer to
changes in the executable bit, instead it denotes
replacing a file with a link, or vice versa.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Signed-off-by: Christian Stimming <stimming@tuhh.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
The code we use to test if a hook is executable or not differs on
Cygwin from the normal POSIX case. Rather then repeating that for
all three hooks we call in our commit code path we can place the
common logic into a global procedure and invoke it when necessary.
This also lets us get rid of the ugly "|& cat" we were using before
as we can now rely on the Tcl 8.4 feature of "2>@1" or fallback to
the "|& cat" when necessary.
The post-commit hook is now run through the same API, but its outcome
does not influence the commit status. As a result we now show any of
the errors from the post-commit hook in a dialog window, instead of on
the user's tty that was used to launch git-gui. This resolves a long
standing bug related to not getting errors out of the post-commit hook
when launched under git-gui.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Under core Git the git-commit tool will invoke the commit-msg hook
if it exists and is executable to the user running git-commit. As
a hook it has some limited value as it cannot alter the commit, but
it can modify the message the user is attempting to commit. It is
also able to examine the message to ensure it conforms to some local
standards/conventions.
Since the hook takes the name of a temporary file holding the message
as its only parameter we need to move the code that creates the temp
file up earlier in our commit code path, and then pass through that
file name to the latest stage (where we call git-commit-tree). We let
the hook alter the file as it sees fit and we don't bother to look at
its content again until the commit succeeded and we need the subject
for the reflog update.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Concatenating commit log messages from multiple commits works better
when all of the commits end with a clean line break.
Its good to be strict in what you create, and lenient in what you
accept, and since we're creating here, we should always try to
Do The Right Thing(tm).
Signed-off-by: Bernt Hansen <bernt@alumni.uwaterloo.ca>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* maint:
git-gui: Don't display CR within console windows
git-gui: Handle progress bars from newer gits
git-gui: Correctly report failures from git-write-tree
Conflicts:
lib/commit.tcl
lib/console.tcl
|
|
If git-write-tree fails (such as if the index file is currently
locked and it wants to write to it) we were not getting the error
message as $tree_id was always the empty string so we shortcut
through the catch and never got the output from stderr.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
The Tcl expression "[append [mc Foo] Bar]" does not return the string
"FooBar" after translation; instead it is setting the variable Foo to
the value Bar, or if Foo is already defined it is appending Bar onto
the end of it. This is *not* what we wanted to have happen here.
Tcl's join function is actually the correct function but its default
joinStr argument is a single space. Unfortunately all of our call
sites do not want an extra space added to their string. So we need
a small wrapper function to make the call to join with an empty
join string. In C this is (roughly) the job of the strcat function.
Since strcat is not yet used at the global level it is a reasonable
name to use here.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Most of these changes were suggested by Shawn Pearce in an answer
to Johannes Schindelin.
Some strings for the blame module were added too.
[sp: Minor edits in blame module formatting]
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
The procedure [mc ...] will translate the strings through msgcat.
Strings must be enclosed in quotes, not in braces, because otherwise
xgettext cannot extract them properly, although on the Tcl side both
delimiters would work fine.
[jes: I merged the later patches to that end.]
Signed-off-by: Christian Stimming <stimming@tuhh.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
Also, the warning message when clicking "Reset" is adapted to
the wording "Reset" rather than a confusion "Cancel commit?".
Signed-off-by: Christian Stimming <stimming@tuhh.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
My earlier introduction of the GITGUI_BCK file (which saves the user's
commit message buffer while they are typing it) broke the Quit function.
If the user makes a commit we delete the GITGUI_BCK file; if they then
immediately quit the application we fail to rename the GITGUI_BCK file
to GITGUI_MSG. This is because the file does not exist, but our flag
still says it does. The root cause is we did not unset the flag during
commit.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
A few users have been seeing crashes in Tk when using the undo key
binding to undo the last few keystroke events in the commit buffer.
Unfortunately that means the user loses their commit message and
must start over from scratch when the user restarts the process.
git-gui now saves the user's commit message buffer every couple of
seconds to a temporary file under .git (specifically .git/GITGUI_BCK).
At exit time we rename this file to .git/GITGUI_MSG if there is a
message, the file exists, and it is currently synchronized with the
Tk buffer. Otherwise we do our usual routine of saving the Tk buffer
to .git/GITGUI_MSG and delete .git/GITGUI_BCK, if it exists.
During startup we favor .git/GITGUI_BCK over .git/GITGUI_MSG. This
way a crash doesn't take out the user's message buffer but instead
will cause the user to lose only a few keystrokes. Most people do
not type more than 200 WPM, and with 30 possible saves per minute
we are unlikely to lose more than 7 words.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
This is a essentially a copy of Paul Mackerras encoding support from
gitk. I stole the code from gitk commit fd8ccbec4f0161, as Paul has
already done all of the hard work setting up this translation table.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
On Windows (which includes Cygwin) Tcl defaults to leaving the EOF
character of input file streams set to the ASCII EOF character, but
if that character were to appear in the data stream then Tcl will
close the channel early. So we have to disable eofchar on Windows.
Since the default is disabled on all platforms except Windows, we
can just disable it everywhere to prevent any sort of read problem.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
This cat-file was done on maint, where we did not have git_read
available to us. But here on master we do, so we should make
use of it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* maint:
git-gui: Work around bad interaction between Tcl and cmd.exe on ^{tree}
|
|
From Johannes Sixt <J.Sixt@eudaptics.com>:
> It seems that MSYS's wish does some quoting for Bourne shells,
> in particular, escape the first '{' of the "^{tree}" suffix, but
> then it uses cmd.exe to run "git rev-parse". However, cmd.exe does
> not remove the backslash, so that the resulting rev expression
> ends up in git's guts as unrecognizable garbage: rev-parse fails,
> and git-gui hickups in a way that it must be restarted.
Johannes originally submitted a patch to this section of commit.tcl
to use `git rev-parse $PARENT:`, but not all versions of Git will
accept that format. So I'm just taking the really simple approach
here of scanning the first line of the commit to grab its tree.
About the same cost, but works everywhere.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Rather than making the C library search for git every time we want
to execute it we now search for the main git wrapper at startup, do
symlink resolution, and then always use the absolute path that we
found to execute the binary later on. This should save us some
cycles, especially on stat challenged systems like Cygwin/Win32.
While I was working on this change I also converted all of our
existing pipes ([open "| git ..."]) to use two new pipe wrapper
functions. These functions take additional options like --nice
and --stderr which instructs Tcl to take special action, like
running the underlying git program through `nice` (if available)
or redirect stderr to stdout for capture in Tcl.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
This is a major rewrite of the way we perform switching between
branches and the subsequent update of the working directory. Like
core Git we now use a single code path to perform all changes: our
new checkout_op class. We also use it for branch creation/update
as it integrates the tracking branch fetch process along with a
very basic merge (fast-forward and reset only currently).
Because some users have literally hundreds of local branches we
use the standard revision picker (with its branch filtering tool)
to select the local branch, rather than keeping all of the local
branches in the Branch menu. The branch menu listing out all of
the available branches is simply not sane for those types of huge
repositories.
Users can now checkout a detached head by ticking off the option
in the checkout dialog. This option is off by default for the
obvious reason, but it can be easily enabled for any local branch
by simply checking it. We also detach the head if any non local
branch was selected, or if a revision expression was entered.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
I'm really starting to dislike global variables. The ui_status_value
global varible is just one of those that seems to appear in a lot of
code and in many cases we didn't even declare it "global" within the
proc that updates it so we haven't always been getting all of the
updates we expected to see.
This change introduces two new global procs:
ui_status $msg; # Sets the status bar to show $msg.
ui_ready; # Changes the status bar to show "Ready."
The second (special) form is used because we often update the area
with this message once we are done processing a block of work and
want the user to know we have completed it.
I'm not fixing the cases that appear in lib/branch.tcl right now
as I'm actually in the middle of a huge refactoring of that code
to support making a detached HEAD checkout.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Recently in git.git change b4372ef136 Johannes Schindelin taught
git-commit.sh to invoke (or skip) calling git-rerere based upon
the rerere.enabled configuration setting:
So, check the config variable "rerere.enabled". If it is set
to "false" explicitely, do not activate rerere, even if
.git/rr-cache exists. This should help when you want to disable
rerere temporarily.
If "rerere.enabled" is not set at all, fall back to detection
of the directory .git/rr-cache.
We now do the same logic in git-gui's own commit implementation.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
I'm finding it difficult to work with a 6,000+ line Tcl script
and not go insane while looking for a particular block of code.
Since most of the program is organized into different units of
functionality and not all users will need all units immediately
on startup we can improve things by splitting procs out into
multiple files and let auto_load handle things for us.
This should help not only to better organize the source, but
it may also improve startup times for some users as the Tcl
parser does not need to read as much script before it can show
the UI. In many cases the user can avoid reading at least half
of git-gui now.
Unfortunately we now need a library directory in our runtime
location. This is currently assumed to be $(sharedir)/git-gui/lib
and its expected that the Makefile invoker will setup some sort of
reasonable sharedir value for us, or let us assume its going to be
$(gitexecdir)/../share.
We now also require a tclsh (in TCL_PATH) to just run the Makefile,
as we use tclsh to generate the tclIndex for our lib directory. I'm
hoping this is not an unncessary burden on end-users who are building
from source.
I haven't really made any functionality changes here, this is just a
huge migration of code from one file to many smaller files. All of
the new changes are to setup the library path and install the library
files.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
Jens Lehmann
Alexander Gavrilov
Gustaf Hendeby
Christian Stimming
Shawn O. Pearce
Bernt Hansen
Michele Ballabio
Christian Stimming