| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The blame builtin now supports automatic conversion of
metadata encoding. By default it is converted to the
character set specified by i18n.logoutputencoding.
Since gui blame expects the data in utf-8, it is
necessary to specify the desired encoding directly.
An old version of the blame command will simply
ignore the option.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Now that the blame viewer has a search panel, it should be
taken into account by the focus transition code. Otherwise
showing a commit tip (by accidentally moving the mouse to
the text frame) causes the focus to transfer away from the
search field.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
It did not delete the object, which is not very good.
Also, destroy may be fired up for subwindows, so we
should check %W.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
One of the largest deficiencies in the blame viewer at
the moment is the impossibility to search for a text
string. This commit fixes it by adding a Firefox-like
search panel to the viewer.
The panel can be shown by pressing F7 or clicking a
menu entry, and is hidden by pressing Esc. Find Next
is available through the F3 key.
Implementation is based on the gitk code, but heavily
refactored. It now also supports case-insensitive
searches, and uses the text box background color to
signal success or failure of the search.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
On modern high-resolution monitors the blame viewer
window is very high, yet too narrow. This patch
makes it gravitate to a more sane resolution, which
takes the font size into account.
It also changes the default text view size to 80% of
the window, and slightly modifies the border decorations
for better appearance.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Allow dynamically changing the encoding from the blame
viewer as well.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Tested-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
- Make diffs and blame default to the system (locale)
encoding instead of hard-coding UTF-8.
- Add a gui.encoding option to allow overriding it.
- gitattributes still have the final word.
The rationale for this is Windows support:
1) Windows people are accustomed to using legacy encodings
for text files. For many of them defaulting to utf-8
will be counter-intuitive.
2) Windows doesn't support utf-8 locales, and switching
the system encoding is a real pain. Thus the option.
This patch also adds proper encoding conversion to Apply Hunk/Line.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Tested-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Most commits have author name encoded in UTF-8, but the incremental
blame output dumps raw bytes and doesn't give us the encoding header
from the commit. Rather than fixing up tooltip data after we have
viewed that particular commit in the blame viewer we can assume all
names are in UTF-8.
This is still going to cause problems when the author name is not
encoded in UTF-8, but the only (efficient) way to solve that is to
add an "encoding" header to the blame --incremental mode output,
as otherwise we need to run `git cat-file commit $sha1` for each
and every commit identified and that would be horribly expensive
on any platform.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Most folks using git-gui on internationalized files have complained
that it doesn't recognize UTF-8 correctly. In the past we have just
ignored the problem and showed the file contents as binary/US-ASCII,
which is wrong no matter how you look at it.
This really should be a per-file attribute, managed by .gitattributes,
so we now pull the "encoding" attribute data for the given path from
the .gitattributes (if available) and use that, falling back to UTF-8
if the attributes are unavailable, git-check-attr is broken, or an
encoding for this path not specified.
We apply the encoding anytime we show file content, which currently
is limited to only the diff viewer and the blame viewer.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Make Blame Parent Commit and Show History Context work
properly for lines blamed on the working copy.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <sop@google.com>
|
|
Add a command-line option to make git gui blame automatically
scroll to a specific line in the file. Useful for integration
with other tools.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Invoke diff-tree between the commit and its parent,
and use the hunks to fix the target line number,
accounting for addition and removal of lines.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Add a context menu item that switches the view to the
parent of the commit under cursor. It is useful to see
how the file looked before the change, and find older
changes in the same lines.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Add a context menu command to load commits
that are within a certain time range from the
selected commit into gitk.
It can be useful for understanding of the code,
especially if the repository is imported from
a VCS that does not support atomic commits.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Add a context menu item to invoke blame -C -C -C on a chunk
of the file. The results are used to update the 'original
location' column of the blame display.
The chunk is computed as the smallest line range that covers
both the 'last change' and 'original location' ranges of the
line that was clicked to open the menu.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Currently 'git-gui blame' does not kill its back-end
process, hoping that it will die anyway when the pipe
is closed. However, in some cases the process works
for a long time without producing any output. This
behavior results in a runaway CPU hog.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
On huge repositories, -C -C can be way too slow to be
unconditionally enabled, and it can also be useful to control
its precision.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
In several places, only the background colour is set to an explicit
value, sometimes even "white". This does not work well with dark
colour themes.
This patch tries to set the foreground colour to "black" in those
situations, where an explicit background colour is set without defining
any foreground colour.
Signed-off-by: Philipp A. Hartmann <ph@sorgh.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
The Tcl expression "[append [mc Foo] Bar]" does not return the string
"FooBar" after translation; instead it is setting the variable Foo to
the value Bar, or if Foo is already defined it is appending Bar onto
the end of it. This is *not* what we wanted to have happen here.
Tcl's join function is actually the correct function but its default
joinStr argument is a single space. Unfortunately all of our call
sites do not want an extra space added to their string. So we need
a small wrapper function to make the call to join with an empty
join string. In C this is (roughly) the job of the strcat function.
Since strcat is not yet used at the global level it is a reasonable
name to use here.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Most of these changes were suggested by Shawn Pearce in an answer
to Johannes Schindelin.
Some strings for the blame module were added too.
[sp: Minor edits in blame module formatting]
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Currently the Git plumbing is not localized so it does not know how
to output weekday and month names that conform to the user's locale
preferences. This doesn't fit with the rest of git-gui's UI as some
of our dates are formatted in Tcl and some are just read from the Git
plumbing so dates aren't consistently presented.
Since git-for-each-ref is presenting us formatted dates and it offers
no way to change that setting even in git 1.5.3.1 we need to first do
a parse of the text strings it produces, correct for timezones, then
reformat the timestamp using Tcl's formatting routines.
Not exactly what I wanted to do but it gets us consistently presented
date strings in areas like the blame viewer and the revision picker
mega-widget's tooltips.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
The procedure [mc ...] will translate the strings through msgcat.
Strings must be enclosed in quotes, not in braces, because otherwise
xgettext cannot extract them properly, although on the Tcl side both
delimiters would work fine.
[jes: I merged the later patches to that end.]
Signed-off-by: Christian Stimming <stimming@tuhh.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
If we haven't yet loaded any commit information for a given line but
our tooltip timer fired and tried to draw the tooltip we shouldn't;
there is nothing to show.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
This is a essentially a copy of Paul Mackerras encoding support from
gitk. I stole the code from gitk commit fd8ccbec4f0161, as Paul has
already done all of the hard work setting up this translation table.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
On Windows (which includes Cygwin) Tcl defaults to leaving the EOF
character of input file streams set to the ASCII EOF character, but
if that character were to appear in the data stream then Tcl will
close the channel early. So we have to disable eofchar on Windows.
Since the default is disabled on all platforms except Windows, we
can just disable it everywhere to prevent any sort of read problem.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Rather than making the C library search for git every time we want
to execute it we now search for the main git wrapper at startup, do
symlink resolution, and then always use the absolute path that we
found to execute the binary later on. This should save us some
cycles, especially on stat challenged systems like Cygwin/Win32.
While I was working on this change I also converted all of our
existing pipes ([open "| git ..."]) to use two new pipe wrapper
functions. These functions take additional options like --nice
and --stderr which instructs Tcl to take special action, like
running the underlying git program through `nice` (if available)
or redirect stderr to stdout for capture in Tcl.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Our blame viewer has had a very fancy progress bar at the bottom of
the window that shows the current status of the blame engine, which
includes the number of lines completed as both a text and a graphical
meter. I want to reuse this meter system in other places, such as
during a branch switch where read-tree -v can give us a progress
meter for any long-running operation.
This change extracts the code and refactors it as a widget that we
can take advantage of in locations other than in the blame viewer.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* maint:
git-gui: Skip nicknames when selecting author initials
|
|
Our blame viewer only grabbed the first initial of the git.git
author string "Simon 'corecode' Schubert". Here the problem was we
looked at Simon, pulled the S into the author initials, then saw
the single quote as the start of the next name and did not like
this character as it was not an uppercase letter.
We now skip over single quoted nicknames placed within the author
name field and grab the initials following it. So the above name
will get the initials SS, rather than just S.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
The blame window shows "who wrote the piece originally" and "who
moved it there" in two columns. In order to identify the former
more correctly, it helps to use the new -w option.
[sp: Minor change to only enable -w if underlying git >= 1.5.3]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Most users these days are using a windowing system attached to a
monitor that has more than 600 pixels worth of vertical space
available for application use. As most files stored by Git are
longer than they are wide (have more lines than columns) we want
to dedicate as much vertical space as we can to the viewer.
Instead of always starting the window at ~600 pixels high we now
start the window 100 pixels shorter than the screen claims it has
available to it. This -100 rule is used because some popular OSen
add menu bars at the top of the monitor, and docks on the bottom
(e.g. Mac OS X, CDE, KDE). We want to avoid making our window too
big and causing the window's resize control from being out of reach
of the user.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Johannes Sixt reported that MinGW/MSYS does not have a nice.exe to
drop the priority of a child process when it gets spawned. So we
have to avoid trying to start `git blame` through nice when we are
on Windows and do not have Cygwin available to us.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
The blame viewer is composed of two different areas, the file
area on top and the commit area on the bottom. If users are
trying to shift the focus it is probably because they want to
shift from one area to the other, so we just setup Tab and
Shift-Tab to jump from the one half to the other in a cycle.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Because Tk does not assure us the order that it will process
children in before it destroys the main toplevel we cannot safely
save our geometry data during a "bind . <Destroy>" event binding.
The geometry may have already changed as a result of a one or
more children being removed from the layout. This was pointed
out in gitk by Mark Levedahl, and patched over there by commit
b6047c5a8166a71e01c6b63ebbb67c6894d95114.
So we now also use "wm protocol . WM_DELETE_WINDOW" to detect when
the window is closed by the user, and forward that close event to
our main do_quit routine.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
The main window's diff header bar background switched from orange
to gold recently, and I liked the effect it had on readability of
the text. Since I wanted the blame viewer to match, here it is.
Though this probably should be a user defined color, or at least
a constant somewhere that everyone can reference.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Usually when you are looking at blame annotations for a region of
a file you are more interested in why something was originally
done then why it is here now. This is because most of the time
when we get original annotation data we are looking at a simple
refactoring performed to better organize code, not to change its
semantic meaning or function. Reorganizations are sometimes of
interest, but not usually.
We now show the original commit data first in the tooltip. This
actually looks quite nice as the original commit will usually have an
author date prior to the current (aka move/copy) annotation's commit,
so the two commits will now tend to appear in chronological order.
I also found myself to always be clicking on the line of interest
in the file column but I always wanted the original tracking data
and not the move/copy data. So I changed our default commit from
$asim_data (the simple move/copy annotation) to the more complex
$amov_data (the -M -C -C original annotation).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
It feels wrong to call the -M -C -C annotations "move/copy tracking"
as they are actually the original locations. So I'm relabeling
the status bar to show "copy/move tracking annotations" for the
current file (no -M -C -C) as that set of annotations tells us who
put the hunk here (who moved/copied it). I'm now calling the -M
-C -C pass "original location annotations" as that's what we're
really digging for.
I also tried to clarify some of the text in the hover tooltip.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
To prevent neighboring lines that are different commits from using
the same background color we now use 3 colors and assign them
by selecting the color that is not used before or after the line
in question. We still color "on the fly" as we receive hunks from
git-blame, but we delay our color decisions until we are getting
the original location data (the slower -M -C -C pass) as that is
usually more fine-grained than the current location data.
Credit goes to Martin Waitz for the tri-coloring concept.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
When the user clicks on a commit link within one of the columns
in the blame viewer we now jump them not just to that commit/file
pair but also to the line of the original file. This saves the
user a lot of time, as they don't need to search through the new
file data for the chunk they were previously looking at.
We also restore the prior view when the user clicks the back button
to return to a pior commit/file pair that they were looking at.
Turned out this was quite tricky to get working in Tk. Every time
I tried to jump the text widgets to the correct locations by way
of the "yview moveto" or "see" subcommands Tk performed the change
until the current event finished dispatching, and then reset the
views back to 0, making the change never take place. Forcing Tk
to run the pending events before we jump the UI resolves the issue.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
If we have commit data from both the simple blame and the
rename/move tracking blame and they differ than there is a
bigger story to tell. We now include data from both commits
so that the user can see that this link as moved, who moved
it, and where it originated from.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
We now perform two passes over any input file given to the blame
viewer. Our first pass is a quick "git-blame" with no options,
getting the details of how each line arrived into this file. We
are specifically ignoring/omitting the rename detection logic as
this first pass is to determine why things got into the state they
are in.
Once the first pass is complete and is displayed in the UI we run
a second pass, using the much more CPU intensive "-M -C -C" options
to perform extensive rename/movement detection. The output of this
second pass is shown in a different column, allowing the user to see
for any given line how it got to be, and if it came from somewhere
else, where that is.
This is actually very instructive when run on our own lib/branch.tcl
script. That file grew recently out of a very large block of code
in git-gui.sh. The first pass shows when I created that file, while
the second pass shows the original commit information.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
If the user clicks on a line region that we haven't yet received
an annotation for from git-blame we show them "Loading annotation".
But I don't want the user to confuse this loading message with a
commit whose first line is "Loading annotation" and think we messed
up our display somehow. Since we never use italics for anything
else, I'm going with the idea that italic slant can be used to show
data is missing/elided out at the time being.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Calling the commit message pane $w_cmit is a tad confusing when
we also have the $w_cgrp column that shows the abbreviated SHA-1s.
So w_cmit -> w_cviewer, as it is the "commit viewer"; and
w_cgrp -> w_amov as it is the "annotated commit + move tracking"
column. Also changed line_data -> amov_data, as that list is
exactly the results shown in w_amov.
Why call the column "move tracking"? Because this column holds
data from "git blame -M -C". I'm considering adding an additional
column that holds the data from "git blame" without -M/-C, showing
who did the copy/move, and when they did it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
If the user runs the blame viewer on a working directory file
instead of a specific commit-ish then we have no value for the
commit SHA1 or the summary line; this causes the history menu
to get an empty entry at the very bottom. We now look for this
odd case and call the meny entry "Working Directory".
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
The Tcl list datatype is significantly faster to work with than
the array type, especially if our indexes are a consecutive set
of numbers, like say line numbers in a file.
This rather large change reorganizes the internal data structure
of the blame viewer to use a proper Tcl list for the annotation
information about a line. Each line is given its own list within
the larger line_data list, where the indexes correspond to various
facts about that particular line.
The interface does seem to be more responsive this way, with less
time required by Tcl to process blame, and to switch to another
version of the same file. It could just be a placebo effect, but
either way most Tcl experts perfer lists for this type of work over
arrays.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
The code to handle our three different text widgets is a bit
on the messy side as we issue the same command on all three
widgets one at a time. Adding (or removing) columns from the
viewer is messy, as a lot of locations need to have the new
column added into the sequence, or removed from it.
We also now delete the tags we create for each commit when
we switch to display another "commit:path" pair. This way the
text viewer doesn't get bogged down with a massive number of tags
as we traverse through history.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
The array variable "order" used to be used to tell us in what
order each commit was received in. Recent changes have removed
that need for an ordering and the "order" array is now just a
boolean 'do we have that commit yet' flag.
The colors were moved to fields, so they appear inside of the
blame viewer instance. This keeps two different concurrently
running blame viewers from stepping on each other's ordering
of the colors in group_colors.
Most of the other fields were moved around a little bit so
that they are organized by major category and value lifespan.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
This list used to store the commits in the order we received
them in. I originally was using it to update the colors of
the commit before and the commit after the current commit,
but since that interface concept turned out to be horribly
ugly and has been removed we no longer need this list.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
After we finish reading a chunk of data from the file stream
we know how many digits we need in the line number column to
show the current maximum line number. If our line number column
isn't wide enough, we should expand it out to the correct width.
Any file over our default allowance of 5 digits (99,999 lines)
is so large that the slight UI "glitch" when we widen the column
out is trivial compared to the time it will take Git to fully do
the annotations.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
Alexander Gavrilov
Shawn O. Pearce
Philipp A. Hartmann
Michele Ballabio
Christian Stimming
Junio C Hamano