summaryrefslogtreecommitdiff
path: root/http-fetch.c
AgeCommit message (Collapse)AuthorFilesLines
2011-12-19Merge branch 'ab/enable-i18n'Libravatar Junio C Hamano1-0/+2
* ab/enable-i18n: i18n: add infrastructure for translating Git with gettext Conflicts: Makefile
2011-12-13http-push: enable "proactive auth"Libravatar Jeff King1-1/+1
Before commit 986bbc08, git was proactive about asking for http passwords. It assumed that if you had a username in your URL, you would also want a password, and asked for it before making any http requests. However, this could interfere with the use of .netrc (see 986bbc08 for details). And it was also unnecessary, since the http fetching code had learned to recognize an HTTP 401 and prompt the user then. Furthermore, the proactive prompt could interfere with the usage of .netrc (see 986bbc08 for details). Unfortunately, the http push-over-DAV code never learned to recognize HTTP 401, and so was broken by this change. This patch does a quick fix of re-enabling the "proactive auth" strategy only for http-push, leaving the dumb http fetch and smart-http as-is. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-05i18n: add infrastructure for translating Git with gettextLibravatar Ævar Arnfjörð Bjarmason1-0/+2
Change the skeleton implementation of i18n in Git to one that can show localized strings to users for our C, Shell and Perl programs using either GNU libintl or the Solaris gettext implementation. This new internationalization support is enabled by default. If gettext isn't available, or if Git is compiled with NO_GETTEXT=YesPlease, Git falls back on its current behavior of showing interface messages in English. When using the autoconf script we'll auto-detect if the gettext libraries are installed and act appropriately. This change is somewhat large because as well as adding a C, Shell and Perl i18n interface we're adding a lot of tests for them, and for those tests to work we need a skeleton PO file to actually test translations. A minimal Icelandic translation is included for this purpose. Icelandic includes multi-byte characters which makes it easy to test various edge cases, and it's a language I happen to understand. The rest of the commit message goes into detail about various sub-parts of this commit. = Installation Gettext .mo files will be installed and looked for in the standard $(prefix)/share/locale path. GIT_TEXTDOMAINDIR can also be set to override that, but that's only intended to be used to test Git itself. = Perl Perl code that's to be localized should use the new Git::I18n module. It imports a __ function into the caller's package by default. Instead of using the high level Locale::TextDomain interface I've opted to use the low-level (equivalent to the C interface) Locale::Messages module, which Locale::TextDomain itself uses. Locale::TextDomain does a lot of redundant work we don't need, and some of it would potentially introduce bugs. It tries to set the $TEXTDOMAIN based on package of the caller, and has its own hardcoded paths where it'll search for messages. I found it easier just to completely avoid it rather than try to circumvent its behavior. In any case, this is an issue wholly internal Git::I18N. Its guts can be changed later if that's deemed necessary. See <AANLkTilYD_NyIZMyj9dHtVk-ylVBfvyxpCC7982LWnVd@mail.gmail.com> for a further elaboration on this topic. = Shell Shell code that's to be localized should use the git-sh-i18n library. It's basically just a wrapper for the system's gettext.sh. If gettext.sh isn't available we'll fall back on gettext(1) if it's available. The latter is available without the former on Solaris, which has its own non-GNU gettext implementation. We also need to emulate eval_gettext() there. If neither are present we'll use a dumb printf(1) fall-through wrapper. = About libcharset.h and langinfo.h We use libcharset to query the character set of the current locale if it's available. I.e. we'll use it instead of nl_langinfo if HAVE_LIBCHARSET_H is set. The GNU gettext manual recommends using langinfo.h's nl_langinfo(CODESET) to acquire the current character set, but on systems that have libcharset.h's locale_charset() using the latter is either saner, or the only option on those systems. GNU and Solaris have a nl_langinfo(CODESET), FreeBSD can use either, but MinGW and some others need to use libcharset.h's locale_charset() instead. =Credits This patch is based on work by Jeff Epler <jepler@unpythonic.net> who did the initial Makefile / C work, and a lot of comments from the Git mailing list, including Jonathan Nieder, Jakub Narebski, Johannes Sixt, Erik Faye-Lund, Peter Krefting, Junio C Hamano, Thomas Rast and others. [jc: squashed a small Makefile fix from Ramsay] Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-17Merge branch 'jk/http-auth'Libravatar Junio C Hamano1-1/+1
* jk/http-auth: http_init: accept separate URL parameter http: use hostname in credential description http: retry authentication failures for all http requests remote-curl: don't retry auth failures with dumb protocol improve httpd auth tests url: decode buffers that are not NUL-terminated
2011-10-15http_init: accept separate URL parameterLibravatar Jeff King1-1/+1
The http_init function takes a "struct remote". Part of its initialization procedure is to look at the remote's url and grab some auth-related parameters. However, using the url included in the remote is: - wrong; the remote-curl helper may have a separate, unrelated URL (e.g., from remote.*.pushurl). Looking at the remote's configured url is incorrect. - incomplete; http-fetch doesn't have a remote, so passes NULL. So http_init never gets to see the URL we are actually going to use. - cumbersome; http-push has a similar problem to http-fetch, but actually builds a fake remote just to pass in the URL. Instead, let's just add a separate URL parameter to http_init, and all three callsites can pass in the appropriate information. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-23Mark http-fetch without -a as deprecatedLibravatar Ben Walton1-0/+4
As the use of http-fetch without -a can create an object store that is invalid to the point where it cannot even be fsck'd, mark it as deprecated. A future release should change the default and then remove the option entirely. Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-03Fix two unused variable warnings in gcc 4.6Libravatar Dan McGee1-2/+1
Seen with -Wunused-but-set-variable. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-26http-fetch: rework url handlingLibravatar Tay Ray Chuan1-11/+5
Do away with a second url variable, rewritten_url, and make url non-const. This is safe because the functions called with url (ie. get_http_walker() and walker_fetch()) do not modify it (ie. marked with const char *). Also, replace code that adds a trailing slash with a call to str_end_url_with_slash(). Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-02http: init and cleanup separately from http-walkerLibravatar Tay Ray Chuan1-1/+4
Previously, all our http operations were done with http-walker. With the new remote-curl helper, we find ourselves using http methods outside of http-walker - for example, fetching info/refs. Accomodate this by separating http_init() and http_cleanup() invocations from http-walker. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-11-10Let 'git http-fetch -h' show usage outside any git repositoryLibravatar Jonathan Nieder1-6/+12
Delay search for a git directory until option parsing has finished. None of the functions used in option parsing look for or read any files other than stdin, so this is safe. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-11-10http-fetch: add missing initialization of argv0_pathLibravatar Jonathan Nieder1-1/+2
According to c6dfb39 (remote-curl: add missing initialization of argv0_path, 2009-10-13), programs with "main" must call this to work correctly on MinGW. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-08-05git-http-fetch: not a builtinLibravatar Linus Torvalds1-0/+89
This splits up git-http-fetch so that it isn't built-in. It also removes the general dependency on curl, because it is no longer used by any built-in code. Because they are no longer LIB_OBJS, add LIB_H to the dependencies of http-related object files, and remove http.h from the dependencies of transport.o Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-19Modularize commit-walkerLibravatar Daniel Barkalow1-1059/+0
This turns the extern functions to be provided by the backend into a struct of pointers, renames the functions to be more namespace-friendly, and updates http-fetch to this interface. It removes the unused include from http-push.c. It makes git-http-fetch a builtin (with the implementation a separate file, accessible directly). Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-19Make function to refill http queue a callbackLibravatar Daniel Barkalow1-1/+5
This eliminates the last function provided by the code using http.h as a global symbol, so it should be possible to have multiple programs using http.h in the same executable, and it also adds an argument to that callback, so that info can be passed into the callback without being global. Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-19Refactor http.h USE_CURL_MULTI fill_active_slots().Libravatar Daniel Barkalow1-16/+7
This removes all of the boilerplate and http-internal stuff from fill_active_slots() and makes it easy to turn into a callback. Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07War on whitespaceLibravatar Junio C Hamano1-1/+1
This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-04-05Fix lseek(2) calls with args 2 and 3 swappedLibravatar Dana How1-1/+1
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-28http-fetch: remove path_len from struct alt_base, it was computed but never usedLibravatar Gerrit Pape1-17/+3
Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-28http-fetch: don't use double-slash as directory separator in URLsLibravatar Gerrit Pape1-9/+12
Please see http://bugs.debian.org/409887 http-fetch expected the URL given at the command line to have a trailing slash anyway, and then added '/objects...' when requesting objects files from the http server. Now it doesn't require the trailing slash in <url> anymore, and strips trailing slashes if given nonetheless. Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-20prefixcmp(): fix-up leftover strncmp().Libravatar Junio C Hamano1-1/+1
There were instances of strncmp() that were formatted improperly (e.g. whitespace around parameter before closing parenthesis) that caused the earlier mechanical conversion step to miss them. This step cleans them up. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-20Mechanical conversion to use prefixcmp()Libravatar Junio C Hamano1-1/+1
This mechanically converts strncmp() to use prefixcmp(), but only when the parameters match specific patterns, so that they can be verified easily. Leftover from this will be fixed in a separate step, including idiotic conversions like if (!strncmp("foo", arg, 3)) => if (!(-prefixcmp(arg, "foo"))) This was done by using this script in px.perl #!/usr/bin/perl -i.bak -p if (/strncmp\(([^,]+), "([^\\"]*)", (\d+)\)/ && (length($2) == $3)) { s|strncmp\(([^,]+), "([^\\"]*)", (\d+)\)|prefixcmp($1, "$2")|; } if (/strncmp\("([^\\"]*)", ([^,]+), (\d+)\)/ && (length($1) == $3)) { s|strncmp\("([^\\"]*)", ([^,]+), (\d+)\)|(-prefixcmp($2, "$1"))|; } and running: $ git grep -l strncmp -- '*.c' | xargs perl px.perl Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-28git-fsck-objects is now synonym to git-fsckLibravatar Junio C Hamano1-1/+1
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-28Don't force everybody to call setup_ident().Libravatar Junio C Hamano1-1/+0
Back when only handful commands that created commit and tag were the only users of committer identity information, it made sense to explicitly call setup_ident() to pre-fill the default value from the gecos information. But it is much simpler for programs to make the call automatic when get_ident() is called these days, since many more programs want to use the information when updating the reflog. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-09Don't die in git-http-fetch when fetching packs.Libravatar Shawn O. Pearce1-0/+1
My sp/mmap changes to pack-check.c modified the function such that it expects packed_git.pack_size to be populated with the total bytecount of the packfile by the caller. But that isn't the case for packs obtained by git-http-fetch as pack_size was not initialized before being accessed. This caused verify_pack to think it had 2^32-21 bytes available when the downloaded pack perhaps was only 305 bytes in length. The use_pack function then later dies with "offset beyond end of packfile" when computing the overall file checksum. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-08short i/o: fix calls to write to use xwrite or write_in_fullLibravatar Andy Whitcroft1-1/+1
We have a number of badly checked write() calls. Often we are expecting write() to write exactly the size we requested or fail, this fails to handle interrupts or short writes. Switch to using the new write_in_full(). Otherwise we at a minimum need to check for EINTR and EAGAIN, where this is appropriate use xwrite(). Note, the changes to config handling are much larger and handled in the next patch in the sequence. Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-08short i/o: fix calls to read to use xread or read_in_fullLibravatar Andy Whitcroft1-1/+1
We have a number of badly checked read() calls. Often we are expecting read() to read exactly the size we requested or fail, this fails to handle interrupts or short reads. Add a read_in_full() providing those semantics. Otherwise we at a minimum need to check for EINTR and EAGAIN, where this is appropriate use xread(). Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-10-08Add WEBDAV timeout to http-fetch.Libravatar Junio C Hamano1-257/+0
Sean <seanlkml@sympatico.ca> writes: > On Sat, 07 Oct 2006 21:52:02 -0700 > Junio C Hamano <junkio@cox.net> wrote: > >> Using DAV, if it works with the server, has the advantage of not >> having to keep objects/info/packs up-to-date from repository >> owner's point of view. But the repository owner ends up keeping >> up-to-date as a side effect of keeping info/refs up-to-date >> anyway (as I do not see a code to read that information over >> DAV), so there is no point doing this over DAV in practice. >> >> Perhaps we should remove call to remote_ls() from >> fetch_indices() unconditionally, not just protected with >> NO_EXPAT and be done with it? > > That makes a lot of sense. A server really has to always provide > a objects/info/packs anyway, just to be fetchable today by clients > that are compiled with NO_EXPAT. And even for an isolated group where everybody knows that everybody else runs DAV-enabled clients, they need info/refs prepared for ls-remote and git-fetch script, which means you will run update-server-info to keep objects/info/packs up to date. Nick, do you see holes in my logic? -- >8 -- http-fetch.c: drop remote_ls() While doing remote_ls() over DAV potentially allows the server side not to keep objects/info/pack up-to-date, misconfigured or buggy servers can silently ignore or not to respond to DAV requests and makes the client hang. The server side (unfortunately) needs to run git-update-server-info even if remote_ls() removes the need to keep objects/info/pack file up-to-date, because the caller of git-http-fetch (git-fetch) and other clients that interact with the repository (e.g. git-ls-remote) need to read from info/refs file (there is no code to make that unnecessary by using DAV yet). Perhaps the right solution in the longer-term is to make info/refs also unnecessary by using DAV, and we would want to resurrect the code this patch removes when we do so, but let's drop remote_ls() implementation for now. It is causing problems without really helping anything yet. git will keep it for us until we need it next time. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16Add ftp:// protocol support for git-http-fetchLibravatar Junio C Hamano1-1/+3
Based on Sasha Khapyorsky's patch but adjusted to the refactored "missing target" detection code. It might have been better if the program were called git-url-fetch but it is too late now ;-). Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16http-fetch.c: consolidate code to detect missing fetch targetLibravatar Junio C Hamano1-8/+15
At a handful places we check two error codes from curl library to see if the file we asked was missing from the remote (e.g. we asked for a loose object when it is in a pack) to decide what to do next. This consolidates the check into a single function. NOTE: the original did not check for HTTP_RETURNED_ERROR when error code is 404, but this version does to make sure 404 is from HTTP and not some other protcol. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-13http-fetch: fix alternates handling.Libravatar Junio C Hamano1-5/+34
Fetch over http from a repository that uses alternates to borrow from neighbouring repositories were quite broken, apparently for some time now. We parse input and count bytes to allocate the new buffer, and when we copy into that buffer we know exactly how many bytes we want to copy from where. Using strlcpy for it was simply stupid, and the code forgot to take it into account that strlcpy terminated the string with NUL. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-02Replace uses of strdup with xstrdup.Libravatar Shawn Pearce1-1/+1
Like xmalloc and xrealloc xstrdup dies with a useful message if the native strdup() implementation returns NULL rather than a valid pointer. I just tried to use xstrdup in new code and found it to be missing. However I expected it to be present as xmalloc and xrealloc are already commonly used throughout the code. [jc: removed the part that deals with last_XXX, which I am finding more and more dubious these days.] Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-27free(NULL) is perfectly valid.Libravatar Junio C Hamano1-9/+4
Jonas noticed some places say "if (X) free(X)" which is totally unnecessary. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-23Convert memcpy(a,b,20) to hashcpy(a,b).Libravatar Shawn Pearce1-1/+1
This abstracts away the size of the hash values when copying them from memory location to memory location, much as the introduction of hashcmp abstracted away hash value comparsion. A few call sites were using char* rather than unsigned char* so I added the cast rather than open hashcpy to be void*. This is a reasonable tradeoff as most call sites already use unsigned char* and the existing hashcmp is also declared to be unsigned char*. [jc: Splitted the patch to "master" part, to be followed by a patch for merge-recursive.c which is not in "master" yet. Fixed the cast in the latter hunk to combine-diff.c which was wrong in the original. Also converted ones left-over in combine-diff.c, diff-lib.c and upload-pack.c ] Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-17Do not use memcmp(sha1_1, sha1_2, 20) with hardcoded length.Libravatar David Rientjes1-3/+3
Introduces global inline: hashcmp(const unsigned char *sha1, const unsigned char *sha2) Uses memcmp for comparison and returns the result based on the length of the hash name (a future runtime decision). Acked-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-15remove unnecessary initializationsLibravatar David Rientjes1-4/+4
[jc: I needed to hand merge the changes to the updated codebase, so the result needs to be checked.] Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-11drop length argument of has_extensionLibravatar Rene Scharfe1-1/+1
As Fredrik points out the current interface of has_extension() is potentially confusing. Its parameters include both a nul-terminated string and a length-limited string. This patch drops the length argument, requiring two nul-terminated strings; all callsites are updated. I checked that all of them indeed provide nul-terminated strings. Filenames need to be nul-terminated anyway if they are to be passed to open() etc. The performance penalty of the additional strlen() is negligible compared to the system calls which inevitably surround has_extension() calls. Additionally, change has_extension() to use size_t inside instead of int, as that is the exact type strlen() returns and memcmp() expects. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-10Add has_extension()Libravatar Rene Scharfe1-1/+1
The little helper has_extension() documents through its name what we are trying to do and makes sure we don't forget the underrun check. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-05commit walkers: setup_ident() to record correct committer in ref-log.Libravatar Ramsay Jones1-0/+1
The function pull() in fetch.c calls write_ref_sha1(), which may need committer identity to update the ref-log, so they need to call setup_ident() before calling git_config() function. Acked-by: Shawn Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-27Teach git-http-fetch the --stdin switchLibravatar Petr Baudis1-16/+29
Speeds up things quite a lot when fetching tags with Cogito. Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-27Make pull() support fetching multiple targets at onceLibravatar Petr Baudis1-1/+1
pull() now takes an array of arguments instead of just one of each kind. Currently, no users use the new capability, but that'll change. Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-27Make pull() take some implicit data as explicit argumentsLibravatar Petr Baudis1-2/+2
Currently it's a bit weird that pull() takes a single argument describing the commit but takes the write_ref from a global variable. This makes it take that as a parameter as well, which might be nicer for the libification in the future, but especially it will make for nicer code when we implement pull()ing multiple commits at once. Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-27Remove -d from *-fetch usage stringsLibravatar Petr Baudis1-1/+1
This is a really ancient remnant of the short era of delta objects stored directly in the object database. Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-10Avoid C99 comments, use old-style C comments instead.Libravatar Pavel Roskin1-3/+3
This doesn't make the code uglier or harder to read, yet it makes the code more portable. This also simplifies checking for other potential incompatibilities. "gcc -std=c89 -pedantic" can flag many incompatible constructs as warnings, but C99 comments will cause it to emit an error. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-24Rename safe_strncpy() to strlcpy().Libravatar Peter Eriksen1-3/+3
This cleans up the use of safe_strncpy() even more. Since it has the same semantics as strlcpy() use this name instead. Also move the definition from inside path.c to its own file compat/strlcpy.c, and use it conditionally at compile time, since some platforms already has strlcpy(). It's included in the same way as compat/setenv.c. Signed-off-by: Peter Eriksen <s022018@student.dtu.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-20Remove all void-pointer arithmetic.Libravatar Florian Forster1-1/+1
ANSI C99 doesn't allow void-pointer arithmetic. This patch fixes this in various ways. Usually the strategy that required the least changes was used. Signed-off-by: Florian Forster <octo@verplant.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-18Remove ranges from switch statements.Libravatar Florian Forster1-6/+7
Though very nice and readable, the "case 'a'...'z':" construct is not ANSI C99 compliant. This patch unfolds the range in `quote.c' and substitutes the switch-statement with an if-statement in `http-fetch.c' and `http-push.c'. Signed-off-by: Florian Forster <octo@verplant.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-16Implement safe_strncpy() as strlcpy() and use it more.Libravatar Peter Eriksen1-6/+4
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-06http-fetch: fix possible segfaultLibravatar Nick Hengeveld1-0/+1
Initialize an object request's slot to a safe value. A non-NULL value can cause a segfault if the request is aborted before it starts. Signed-off-by: Nick Hengeveld <nickh@reactrix.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-03Merge branch 'sp/reflog'Libravatar Junio C Hamano1-0/+2
* sp/reflog: fetch.c: do not pass uninitialized lock to unlock_ref(). Test that git-branch -l works. Verify git-commit provides a reflog message. Enable ref log creation in git checkout -b. Create/delete branch ref logs. Include ref log detail in commit, reset, etc. Change order of -m option to update-ref. Correct force_write bug in refs.c Change 'master@noon' syntax to 'master@{noon}'. Log ref updates made by fetch. Force writing ref if it doesn't exist. Added logs/ directory to repository layout. General ref log reading improvements. Fix ref log parsing so it works properly. Support 'master@2 hours ago' syntax Log ref updates to logs/refs/<ref> Convert update-ref to use ref_lock API. Improve abstraction of ref lock/write.
2006-05-22Remove possible segfault in http-fetch.Libravatar Sean1-2/+2
Free the curl string lists after running http_cleanup to avoid an occasional segfault in the curl library. Seems to only occur if the website returns a 405 error. Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca> Signed-off-by: Junio C Hamano <junkio@cox.net>