| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* ab/enable-i18n:
i18n: add infrastructure for translating Git with gettext
Conflicts:
Makefile
|
|
Before commit 986bbc08, git was proactive about asking for
http passwords. It assumed that if you had a username in
your URL, you would also want a password, and asked for it
before making any http requests.
However, this could interfere with the use of .netrc (see
986bbc08 for details). And it was also unnecessary, since
the http fetching code had learned to recognize an HTTP 401
and prompt the user then. Furthermore, the proactive prompt
could interfere with the usage of .netrc (see 986bbc08 for
details).
Unfortunately, the http push-over-DAV code never learned to
recognize HTTP 401, and so was broken by this change. This
patch does a quick fix of re-enabling the "proactive auth"
strategy only for http-push, leaving the dumb http fetch and
smart-http as-is.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the skeleton implementation of i18n in Git to one that can show
localized strings to users for our C, Shell and Perl programs using
either GNU libintl or the Solaris gettext implementation.
This new internationalization support is enabled by default. If
gettext isn't available, or if Git is compiled with
NO_GETTEXT=YesPlease, Git falls back on its current behavior of
showing interface messages in English. When using the autoconf script
we'll auto-detect if the gettext libraries are installed and act
appropriately.
This change is somewhat large because as well as adding a C, Shell and
Perl i18n interface we're adding a lot of tests for them, and for
those tests to work we need a skeleton PO file to actually test
translations. A minimal Icelandic translation is included for this
purpose. Icelandic includes multi-byte characters which makes it easy
to test various edge cases, and it's a language I happen to
understand.
The rest of the commit message goes into detail about various
sub-parts of this commit.
= Installation
Gettext .mo files will be installed and looked for in the standard
$(prefix)/share/locale path. GIT_TEXTDOMAINDIR can also be set to
override that, but that's only intended to be used to test Git itself.
= Perl
Perl code that's to be localized should use the new Git::I18n
module. It imports a __ function into the caller's package by default.
Instead of using the high level Locale::TextDomain interface I've
opted to use the low-level (equivalent to the C interface)
Locale::Messages module, which Locale::TextDomain itself uses.
Locale::TextDomain does a lot of redundant work we don't need, and
some of it would potentially introduce bugs. It tries to set the
$TEXTDOMAIN based on package of the caller, and has its own
hardcoded paths where it'll search for messages.
I found it easier just to completely avoid it rather than try to
circumvent its behavior. In any case, this is an issue wholly
internal Git::I18N. Its guts can be changed later if that's deemed
necessary.
See <AANLkTilYD_NyIZMyj9dHtVk-ylVBfvyxpCC7982LWnVd@mail.gmail.com> for
a further elaboration on this topic.
= Shell
Shell code that's to be localized should use the git-sh-i18n
library. It's basically just a wrapper for the system's gettext.sh.
If gettext.sh isn't available we'll fall back on gettext(1) if it's
available. The latter is available without the former on Solaris,
which has its own non-GNU gettext implementation. We also need to
emulate eval_gettext() there.
If neither are present we'll use a dumb printf(1) fall-through
wrapper.
= About libcharset.h and langinfo.h
We use libcharset to query the character set of the current locale if
it's available. I.e. we'll use it instead of nl_langinfo if
HAVE_LIBCHARSET_H is set.
The GNU gettext manual recommends using langinfo.h's
nl_langinfo(CODESET) to acquire the current character set, but on
systems that have libcharset.h's locale_charset() using the latter is
either saner, or the only option on those systems.
GNU and Solaris have a nl_langinfo(CODESET), FreeBSD can use either,
but MinGW and some others need to use libcharset.h's locale_charset()
instead.
=Credits
This patch is based on work by Jeff Epler <jepler@unpythonic.net> who
did the initial Makefile / C work, and a lot of comments from the Git
mailing list, including Jonathan Nieder, Jakub Narebski, Johannes
Sixt, Erik Faye-Lund, Peter Krefting, Junio C Hamano, Thomas Rast and
others.
[jc: squashed a small Makefile fix from Ramsay]
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/http-auth:
http_init: accept separate URL parameter
http: use hostname in credential description
http: retry authentication failures for all http requests
remote-curl: don't retry auth failures with dumb protocol
improve httpd auth tests
url: decode buffers that are not NUL-terminated
|
|
The http_init function takes a "struct remote". Part of its
initialization procedure is to look at the remote's url and
grab some auth-related parameters. However, using the url
included in the remote is:
- wrong; the remote-curl helper may have a separate,
unrelated URL (e.g., from remote.*.pushurl). Looking at
the remote's configured url is incorrect.
- incomplete; http-fetch doesn't have a remote, so passes
NULL. So http_init never gets to see the URL we are
actually going to use.
- cumbersome; http-push has a similar problem to
http-fetch, but actually builds a fake remote just to
pass in the URL.
Instead, let's just add a separate URL parameter to
http_init, and all three callsites can pass in the
appropriate information.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As the use of http-fetch without -a can create an object store that is
invalid to the point where it cannot even be fsck'd, mark it as
deprecated. A future release should change the default and then
remove the option entirely.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Seen with -Wunused-but-set-variable.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Do away with a second url variable, rewritten_url, and make url
non-const. This is safe because the functions called with url (ie.
get_http_walker() and walker_fetch()) do not modify it (ie. marked with
const char *).
Also, replace code that adds a trailing slash with a call to
str_end_url_with_slash().
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, all our http operations were done with http-walker. With the
new remote-curl helper, we find ourselves using http methods outside of
http-walker - for example, fetching info/refs.
Accomodate this by separating http_init() and http_cleanup() invocations
from http-walker.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Delay search for a git directory until option parsing has finished.
None of the functions used in option parsing look for or read any
files other than stdin, so this is safe.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
According to c6dfb39 (remote-curl: add missing initialization of
argv0_path, 2009-10-13), programs with "main" must call this to
work correctly on MinGW.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This splits up git-http-fetch so that it isn't built-in.
It also removes the general dependency on curl, because it is no
longer used by any built-in code. Because they are no longer LIB_OBJS,
add LIB_H to the dependencies of http-related object files, and remove
http.h from the dependencies of transport.o
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This turns the extern functions to be provided by the backend into a
struct of pointers, renames the functions to be more
namespace-friendly, and updates http-fetch to this interface. It
removes the unused include from http-push.c. It makes git-http-fetch a
builtin (with the implementation a separate file, accessible
directly).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This eliminates the last function provided by the code using http.h as
a global symbol, so it should be possible to have multiple programs
using http.h in the same executable, and it also adds an argument to
that callback, so that info can be passed into the callback without
being global.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This removes all of the boilerplate and http-internal stuff from
fill_active_slots() and makes it easy to turn into a callback.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Please see http://bugs.debian.org/409887
http-fetch expected the URL given at the command line to have a trailing
slash anyway, and then added '/objects...' when requesting objects files
from the http server.
Now it doesn't require the trailing slash in <url> anymore, and strips
trailing slashes if given nonetheless.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
There were instances of strncmp() that were formatted improperly
(e.g. whitespace around parameter before closing parenthesis)
that caused the earlier mechanical conversion step to miss
them. This step cleans them up.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This mechanically converts strncmp() to use prefixcmp(), but only when
the parameters match specific patterns, so that they can be verified
easily. Leftover from this will be fixed in a separate step, including
idiotic conversions like
if (!strncmp("foo", arg, 3))
=>
if (!(-prefixcmp(arg, "foo")))
This was done by using this script in px.perl
#!/usr/bin/perl -i.bak -p
if (/strncmp\(([^,]+), "([^\\"]*)", (\d+)\)/ && (length($2) == $3)) {
s|strncmp\(([^,]+), "([^\\"]*)", (\d+)\)|prefixcmp($1, "$2")|;
}
if (/strncmp\("([^\\"]*)", ([^,]+), (\d+)\)/ && (length($1) == $3)) {
s|strncmp\("([^\\"]*)", ([^,]+), (\d+)\)|(-prefixcmp($2, "$1"))|;
}
and running:
$ git grep -l strncmp -- '*.c' | xargs perl px.perl
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Back when only handful commands that created commit and tag were
the only users of committer identity information, it made sense
to explicitly call setup_ident() to pre-fill the default value
from the gecos information. But it is much simpler for programs
to make the call automatic when get_ident() is called these days,
since many more programs want to use the information when updating
the reflog.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
My sp/mmap changes to pack-check.c modified the function such that
it expects packed_git.pack_size to be populated with the total
bytecount of the packfile by the caller.
But that isn't the case for packs obtained by git-http-fetch as
pack_size was not initialized before being accessed. This caused
verify_pack to think it had 2^32-21 bytes available when the
downloaded pack perhaps was only 305 bytes in length. The use_pack
function then later dies with "offset beyond end of packfile"
when computing the overall file checksum.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We have a number of badly checked write() calls. Often we are
expecting write() to write exactly the size we requested or fail,
this fails to handle interrupts or short writes. Switch to using
the new write_in_full(). Otherwise we at a minimum need to check
for EINTR and EAGAIN, where this is appropriate use xwrite().
Note, the changes to config handling are much larger and handled
in the next patch in the sequence.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We have a number of badly checked read() calls. Often we are
expecting read() to read exactly the size we requested or fail, this
fails to handle interrupts or short reads. Add a read_in_full()
providing those semantics. Otherwise we at a minimum need to check
for EINTR and EAGAIN, where this is appropriate use xread().
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Sean <seanlkml@sympatico.ca> writes:
> On Sat, 07 Oct 2006 21:52:02 -0700
> Junio C Hamano <junkio@cox.net> wrote:
>
>> Using DAV, if it works with the server, has the advantage of not
>> having to keep objects/info/packs up-to-date from repository
>> owner's point of view. But the repository owner ends up keeping
>> up-to-date as a side effect of keeping info/refs up-to-date
>> anyway (as I do not see a code to read that information over
>> DAV), so there is no point doing this over DAV in practice.
>>
>> Perhaps we should remove call to remote_ls() from
>> fetch_indices() unconditionally, not just protected with
>> NO_EXPAT and be done with it?
>
> That makes a lot of sense. A server really has to always provide
> a objects/info/packs anyway, just to be fetchable today by clients
> that are compiled with NO_EXPAT.
And even for an isolated group where everybody knows that
everybody else runs DAV-enabled clients, they need info/refs
prepared for ls-remote and git-fetch script, which means you
will run update-server-info to keep objects/info/packs up to
date.
Nick, do you see holes in my logic?
-- >8 --
http-fetch.c: drop remote_ls()
While doing remote_ls() over DAV potentially allows the server
side not to keep objects/info/pack up-to-date, misconfigured or
buggy servers can silently ignore or not to respond to DAV
requests and makes the client hang.
The server side (unfortunately) needs to run git-update-server-info
even if remote_ls() removes the need to keep objects/info/pack file
up-to-date, because the caller of git-http-fetch (git-fetch) and other
clients that interact with the repository (e.g. git-ls-remote) need to
read from info/refs file (there is no code to make that unnecessary by
using DAV yet).
Perhaps the right solution in the longer-term is to make info/refs
also unnecessary by using DAV, and we would want to resurrect the
code this patch removes when we do so, but let's drop remote_ls()
implementation for now. It is causing problems without really
helping anything yet.
git will keep it for us until we need it next time.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Based on Sasha Khapyorsky's patch but adjusted to the refactored
"missing target" detection code.
It might have been better if the program were called
git-url-fetch but it is too late now ;-).
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
At a handful places we check two error codes from curl library
to see if the file we asked was missing from the remote (e.g.
we asked for a loose object when it is in a pack) to decide what
to do next. This consolidates the check into a single function.
NOTE: the original did not check for HTTP_RETURNED_ERROR when
error code is 404, but this version does to make sure 404 is
from HTTP and not some other protcol.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Fetch over http from a repository that uses alternates to borrow
from neighbouring repositories were quite broken, apparently for
some time now.
We parse input and count bytes to allocate the new buffer, and
when we copy into that buffer we know exactly how many bytes we
want to copy from where. Using strlcpy for it was simply
stupid, and the code forgot to take it into account that strlcpy
terminated the string with NUL.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Like xmalloc and xrealloc xstrdup dies with a useful message if
the native strdup() implementation returns NULL rather than a
valid pointer.
I just tried to use xstrdup in new code and found it to be missing.
However I expected it to be present as xmalloc and xrealloc are
already commonly used throughout the code.
[jc: removed the part that deals with last_XXX, which I am
finding more and more dubious these days.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Jonas noticed some places say "if (X) free(X)" which is totally
unnecessary.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This abstracts away the size of the hash values when copying them
from memory location to memory location, much as the introduction
of hashcmp abstracted away hash value comparsion.
A few call sites were using char* rather than unsigned char* so
I added the cast rather than open hashcpy to be void*. This is a
reasonable tradeoff as most call sites already use unsigned char*
and the existing hashcmp is also declared to be unsigned char*.
[jc: Splitted the patch to "master" part, to be followed by a
patch for merge-recursive.c which is not in "master" yet.
Fixed the cast in the latter hunk to combine-diff.c which was
wrong in the original.
Also converted ones left-over in combine-diff.c, diff-lib.c and
upload-pack.c ]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Introduces global inline:
hashcmp(const unsigned char *sha1, const unsigned char *sha2)
Uses memcmp for comparison and returns the result based on the length of
the hash name (a future runtime decision).
Acked-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
[jc: I needed to hand merge the changes to the updated codebase,
so the result needs to be checked.]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
As Fredrik points out the current interface of has_extension() is
potentially confusing. Its parameters include both a nul-terminated
string and a length-limited string.
This patch drops the length argument, requiring two nul-terminated
strings; all callsites are updated. I checked that all of them indeed
provide nul-terminated strings. Filenames need to be nul-terminated
anyway if they are to be passed to open() etc. The performance penalty
of the additional strlen() is negligible compared to the system calls
which inevitably surround has_extension() calls.
Additionally, change has_extension() to use size_t inside instead of
int, as that is the exact type strlen() returns and memcmp() expects.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The little helper has_extension() documents through its name what we are
trying to do and makes sure we don't forget the underrun check.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The function pull() in fetch.c calls write_ref_sha1(), which may
need committer identity to update the ref-log, so they need to
call setup_ident() before calling git_config() function.
Acked-by: Shawn Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Speeds up things quite a lot when fetching tags with Cogito.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
pull() now takes an array of arguments instead of just one of each kind.
Currently, no users use the new capability, but that'll change.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Currently it's a bit weird that pull() takes a single argument
describing the commit but takes the write_ref from a global variable.
This makes it take that as a parameter as well, which might be nicer
for the libification in the future, but especially it will make for
nicer code when we implement pull()ing multiple commits at once.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This is a really ancient remnant of the short era of delta objects stored
directly in the object database.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This doesn't make the code uglier or harder to read, yet it makes the
code more portable. This also simplifies checking for other potential
incompatibilities. "gcc -std=c89 -pedantic" can flag many incompatible
constructs as warnings, but C99 comments will cause it to emit an error.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This cleans up the use of safe_strncpy() even more. Since it has the
same semantics as strlcpy() use this name instead. Also move the
definition from inside path.c to its own file compat/strlcpy.c, and use
it conditionally at compile time, since some platforms already has
strlcpy(). It's included in the same way as compat/setenv.c.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
ANSI C99 doesn't allow void-pointer arithmetic. This patch fixes this in
various ways. Usually the strategy that required the least changes was used.
Signed-off-by: Florian Forster <octo@verplant.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Though very nice and readable, the "case 'a'...'z':" construct is not ANSI C99
compliant. This patch unfolds the range in `quote.c' and substitutes the
switch-statement with an if-statement in `http-fetch.c' and `http-push.c'.
Signed-off-by: Florian Forster <octo@verplant.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Initialize an object request's slot to a safe value. A non-NULL value
can cause a segfault if the request is aborted before it starts.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* sp/reflog:
fetch.c: do not pass uninitialized lock to unlock_ref().
Test that git-branch -l works.
Verify git-commit provides a reflog message.
Enable ref log creation in git checkout -b.
Create/delete branch ref logs.
Include ref log detail in commit, reset, etc.
Change order of -m option to update-ref.
Correct force_write bug in refs.c
Change 'master@noon' syntax to 'master@{noon}'.
Log ref updates made by fetch.
Force writing ref if it doesn't exist.
Added logs/ directory to repository layout.
General ref log reading improvements.
Fix ref log parsing so it works properly.
Support 'master@2 hours ago' syntax
Log ref updates to logs/refs/<ref>
Convert update-ref to use ref_lock API.
Improve abstraction of ref lock/write.
|
|
Free the curl string lists after running http_cleanup to
avoid an occasional segfault in the curl library. Seems
to only occur if the website returns a 405 error.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Junio C Hamano
Jeff King
Ævar Arnfjörð Bjarmason
Ben Walton
Dan McGee
Tay Ray Chuan
Jonathan Nieder
Linus Torvalds
Daniel Barkalow
Dana How
Gerrit Pape
Junio C Hamano
Shawn O. Pearce
Andy Whitcroft
David Rientjes
Rene Scharfe
Ramsay Jones
Petr Baudis
Pavel Roskin
Peter Eriksen
Florian Forster
Nick Hengeveld
Sean