Age | Commit message (Collapse) | Author | Files | Lines |
|
When a repository otherwise properly prepared is served by a
dumb HTTP server that sends "No such page" output with 200
status for human consumption to a request for a page that does
not exist, the users will get an alarming "File X corrupt" error
message. Hint that they might be dealing with such a server at
the end and suggest running fsck-objects to check if the result
is OK (the pack-fallback code does the right thing in this case
so unless a loose object file was actually corrupt the result
should check OK).
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When fetching alternates, http-fetch may reuse the slot to fetch non-http
alternates if http-alternates does not exist. When doing so, it now needs
to update the slot's finished status so run_active_slot waits for the
non-http alternates request to finish.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
In fetch_object, there's a call to release an object request if the
object mysteriously arrived, say in a pack. Unfortunately, the fetch
attempt for this object might already be in progress, and we'll leak the
descriptor. Instead, try to tidy away the request.
Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
It's a bit convoluted. Tidy it up.
Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
move_temp_to_file returns 0 or -1. This is not a good thing to pass to
strerror(3). Fortunately, someone already reported the error, so don't
worry too much.
Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
In fill_active_slots() -- if we find an object which has already arrived,
say as part of a pack, /don't/ remove it from the list. It's already been
prefetched and someone will ask for it later. Just label it as done and
carry blithely on. (As it was, the code would dereference a freed object
to continue through the list anyway.)
Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
There's no need for these structures to be static, and it could potentially
cause problems down the road.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Add a way to store the results of an HTTP request when a slot finishes
so the results can be processed after the slot has been reused.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Recognize missing files when using http-fetch with file:// URLs
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
It failed to register the last pack in the objects/info/packs
file. Also it had an independent overrun error.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
These are whole-tree operations and there is not much point
making them operable from within a subdirectory, but it is easy
to do so, and using setup_git_directory() upfront helps git://
proxy specification picked up from the correct place.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Better response handling for pack list requests - a 404 means we do have
the list but it happens to be empty.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Rename object request functions and data to make it more clear which type
of request is being processed - this is a response to the introduction of
slot callbacks and the definition of different types of requests such as
alternates_request.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Move shared HTTP request functionality out of http-fetch and http-push,
and replace the two fwrite_buffer/fwrite_buffer_dynamic functions with
one fwrite_buffer function that does dynamic buffering. Use slot
callbacks to process responses to fetch object transfer requests and
push transfer requests, and put all of http-push into an #ifdef check
for curl multi support.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The current http-fetch is rather careless about fd leakage, causing
problems while fetching large repositories. This patch does not reserve
exhaustiveness, but I covered everything I spotted. I also left some
safeguards in place in case I missed something, so that we get to know,
sooner or later.
Reported by Becky Bruce <becky.bruce@freescale.com>.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Added a call to finish_request to clean up resources if the server
returned a 404 and there are no alternates left to try.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Stop additional alternates requests from starting if one is already in
progress. This adds an optional callback which is processed after a slot
has finished running.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Otherwise, git-clone silently failed to clone a remote
repository where redirections (ie. a response with a
"Location" header line) are used.
This includes the fixes from Nick Hengeveld.
Signed-off-by: Josef Weidendorfer <Josef.Weidendorfer@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Make a bunch of needlessly global functions static, and replace two
K&R-style declarations.
Signed-off-by: Peter Hagervall <hager@cs.umu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When curl_message is released using curl_multi_remove_handle(), it's
contents are undefined. Therefore, get the information before releasing it.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
After using cg-update to pull, empty files named *.temp are left in
the various subdirectories of .git/objects/. These are created by
git-http-fetch to hold data as it's being fetched from the remote
repository. They are left behind after a transfer error so that the
next time git-http-fetch runs it can pick up where it left off. If
they're empty though, it would make more sense to delete them rather
than leaving them behind for the next attempt.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
git-http-fetch spits out curl 404 error message when unable to fetch an object,
but that's confusing since no error really happened and the object is usually
found in a pack it tries right after that. And if the object still cannot be
retrieved, it will say another error message anyway. OTOH other HTTP errors
(403 etc) are likely fatal and the user should be still informed about them.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Allow running requests to finish after a pull error
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Switched back to loading alternates as needed
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Clean up CURL handles in unused request slots
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Add configuration settings to abort HTTP requests if the transfer rate
drops below a threshold for a specified length of time. Environment
variables override config file settings.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This patch cleans out all sparse warnings from http-fetch.c
I'm a bit uncomfortable with adding extra #ifdefs to avoid either
'mixing declaration with code' or 'unused variable' warnings, but I
figured that since those functions are already littered with #ifdefs I
might just get away with it. Comments?
[jc: I adjusted Peter's patch to address uncomfortableness issues.]
Signed-off-by: Peter Hagervall <hager@cs.umu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Hi,
On Fri, 14 Oct 2005, Junio C Hamano wrote:
> Johannes Schindelin <Johannes.Schindelin@gmx.de> writes:
>
> > This patch looks bigger than it really is: The code to get the
> > default handle was refactored into a function, and is called
> > instead of curl_easy_duphandle() if that does not exist.
>
> I'd like to take Nick's config file patch first, which
> unfortunately interferes with your patch. I'd hate to ask you
> this, but could you rebase it on top of Nick's patch, [...]
No need to hate it. Here comes the rebased patch, and this time, I
actually tested it a bit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Use "http." config file settings if they exist. Environment variables
still work, and they will override config file settings.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
git-http-fetch received objects/info/packs into a fixed-size buffer
and started to fail when this file became larger than the buffer.
Change it to grow the buffer dynamically, and do the same thing for
objects/info/alternates. Also add missing free() calls for these
buffers.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
curl_escape ought to do this, but we should not let it quote
slashes (nobody said refs/tags cannot have subdirectories), so
we roll our own safer version. With this, the last part of
git-clone from Martin's moodle repository that used to fail now
works, which reads:
$ git-http-fetch -v -a -w 'tags/MOODLE_15_MERGED **INVALID**' \
'tags/MOODLE_15_MERGED **INVALID**' \
http://locke.catalyst.net.nz/git/moodle.git/
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The function fetch_alternates() is called only once from the
main now.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The http commit walker cannot use the same temporary file
creation code because it needs to use predictable temporary
filename for partial fetch continuation purposes, but the code
to move the temporary file to the final location should be
usable from the ordinary object creation codepath.
Export move_temp_to_file from sha1_file.c and use it, while
losing the custom relink_or_rename function from http-fetch.c.
Also the temporary object file creation part needs to make sure
the leading path exists, in preparation of the really lazy
fan-out directory creation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The parallel request changes didn't properly implement the previous patch to
allow caching of retrieved objects by proxy servers. Restore the previous
functionality such that by default requests include the "Pragma: no-cache"
header, and this header is removed on requests for pack indexes, packs, and
objects.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Be sure not to fetch objects that already exist in the local repository.
The main process loop no longer performs this check, http-fetch now checks
prior to starting a new request queue entry and when fetch_object() is called,
and local-fetch now checks when fetch_object() is called.
As discussed in this thread: http://marc.theaimsgroup.com/?t=112854890500001
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
|
|
Use an environment variable rather than a command-line argument to set the
parallel HTTP request limit. This allows the setting to work whether
git-http-fetch is run directly or via git-fetch.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Only compile parallel HTTP support with CURL >= 7.9.8
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Add support for parallel HTTP transfers. Prefetch populates a queue of
objects to transfer and starts feeding requests to an active request
queue for processing; fetch_object keeps the active queue moving
while the specified object is being transferred. The size of the active
queue can be restricted using -r and defaults to 5 concurrent transfers.
Requests for objects that are not prefetched are also processed via the
active queue.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Don't unlink the temp file when an object transfer fails, so next attempt
will pick up where the failed transfer left off
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Add the sanity checks discussed on the list with Nick Hengeveld in
<20050927000931.GA15615@reactrix.com>.
* unlink of previous and rename from temp to previous can fail for
reasons other than benign ones (missing previous and missing temp).
Report these failures when we encounter them, to make diagnosing
problems easier.
* when rewinding the partially written result, make sure to
truncate the file.
Also verify the pack after downloading by calling
verify_packfile().
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
HTTP partial transfer support for object, pack, and index transfers
[jc: this should not be placed in "master" -- it does not have any
fixes requested on the list.]
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
... so try to set it only in later versions.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Insert 'static' where appropriate.
Signed-off-by: Peter Hagervall <hager@cs.umu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Added support for additional CURL SSL settings via environment variables.
Client certificate/key files can be specified as well as alternate CA
information.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Return CURL error message when object transfer fails
[jc: added similar curl_errorstr errors to places where we
use curl_easy_perform() to run fetch that _must_ succeed.]
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
With the --recover option, we verify that we have absolutely
everything reachable from the target, not assuming that things
reachable from refs will be complete.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|