summaryrefslogtreecommitdiff
path: root/help.c
AgeCommit message (Collapse)AuthorFilesLines
2008-09-11git wrapper: also use aliases to correct mistyped commandsLibravatar Pieter de Bie1-8/+24
Signed-off-by: Pieter de Bie <pdebie@ai.rug.nl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-09-07Merge branch 'ar/autospell'Libravatar Junio C Hamano1-1/+88
* ar/autospell: Add help.autocorrect to enable/disable autocorrecting git wrapper: DWIM mistyped commands
2008-08-31Add help.autocorrect to enable/disable autocorrectingLibravatar Alex Riesen1-1/+18
It is off(0) by default, to avoid scaring people unless they asked to. If set to a non-0 value, wait for that amount of deciseconds before running the corrected command. Suggested by Junio, so he has a chance to hit Ctrl-C. Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-31git wrapper: DWIM mistyped commandsLibravatar Johannes Schindelin1-1/+71
This patch introduces a modified Damerau-Levenshtein algorithm into Git's code base, and uses it with the following penalties to show some similar commands when an unknown command was encountered: swap = 0, insertion = 1, substitution = 2, deletion = 4 A typical output would now look like this: $ git sm git: 'sm' is not a git-command. See 'git --help'. Did you mean one of these? am rm The cut-off is at similarity rating 6, which was empirically determined to give sensible results. As a convenience, if there is only one candidate, Git continues under the assumption that the user mistyped it. Example: $ git reabse WARNING: You called a Git program named 'reabse', which does not exist. Continuing under the assumption that you meant 'rebase' [...] Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-28list_commands: only call git_exec_path if it is neededLibravatar Alex Riesen1-1/+1
Even if it always needed Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-28Allow git help work without PATH setLibravatar Alex Riesen1-23/+20
Just because we can Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-28Remove calculation of the longest command name from where it is not usedLibravatar Alex Riesen1-19/+15
Just calculate it where it is needed - it is cheap and trivial, as all the lengths are already there (stored when creating the command lists). Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-02Builtin git-help.Libravatar Miklos Vajna1-464/+0
This patch splits out git-help's functions to builtin-help.c and leaves only functions used by other builtins in help.c. First this removes git-help's functions from libgit which are not interesting for other builtins, second this makes 'git help help' work again. Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-30builtin-help: always load_command_list() in cmd_help()Libravatar Miklos Vajna1-1/+1
When cmd_help() is called, we always need the list of main and other commands, not just when the list of all commands is shown. Before this patch 'git help diff' invoked 'man gitdiff' because cmd_to_page() thought 'diff' is not a git command. Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-29builtin-help: make some internal functions available to other builtinsLibravatar Miklos Vajna1-38/+39
Make load_command_list() capable of filtering for a given prefix and loading into a pair of "struct cmdnames" supplied by the caller. Make the static add_cmdname(), exclude_cmds() and is_in_cmdlist() functions non-static. Make list_commands() accept a custom title, and work from a pair of "struct cmdnames" supplied by the caller. Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-27Avoid chdir() in list_commands_in_dir()Libravatar Johannes Schindelin1-2/+10
The function list_commands_in_dir() tried to be lazy and just chdir() to the directory which entries it listed, so that the check if the file is executable could be done on dir->d_name. However, there is no good reason to jump around wildly just to find all Git commands. Instead, have a strbuf and construct the full path dynamically. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-16Merge branch 'sb/dashless'Libravatar Junio C Hamano1-1/+1
* sb/dashless: Make usage strings dash-less t/: Use "test_must_fail git" instead of "! git" t/test-lib.sh: exit with small negagive int is ok with test_must_fail Conflicts: builtin-blame.c builtin-mailinfo.c builtin-mailsplit.c builtin-shortlog.c git-am.sh t/t4150-am.sh t/t4200-rerere.sh
2008-07-13help (Windows): Display HTML in default browser using Windows' shell APILibravatar Steffen Prohaska1-1/+13
The system's default browser for displaying HTML help pages is now used directly on Windows, instead of launching git-web--browser, which requires a Unix shell. Avoiding MSYS' bash when possible is good because it avoids potential path translation issues. In this case it is not too hard to avoid launching a shell, so let's avoid it. The Windows-specific code is implemented in compat/mingw.c to avoid platform-specific code in the main code base. On Windows, open_html is provided as a define. If open_html is not defined, git-web--browse is used. This approach avoids platform-specific ifdefs by using per-function ifdefs. The "ifndef open_html" together with the introductory comment should sufficiently warn developers, so that they hopefully will not break this mechanism. Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-13help.c: Add support for htmldir relative to git_exec_path()Libravatar Steffen Prohaska1-3/+5
If htmldir (in the Makefile) is a relative path, this path will now be interpreted relative to git_exec_path. This can be used to create an installation that can be moved to a different directory without re-compiling. The Windows installer (msysgit) is an example for such a setup. Note that the Makefile maps htmldir to the define GIT_HTML_PATH. Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-13Make usage strings dash-lessLibravatar Stephan Beyer1-1/+1
When you misuse a git command, you are shown the usage string. But this is currently shown in the dashed form. So if you just copy what you see, it will not work, when the dashed form is no longer supported. This patch makes git commands show the dash-less version. For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh generates a dash-less usage string now. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-02Merge branch 'j6t/mingw'Libravatar Junio C Hamano1-5/+28
* j6t/mingw: (38 commits) compat/pread.c: Add a forward declaration to fix a warning Windows: Fix ntohl() related warnings about printf formatting Windows: TMP and TEMP environment variables specify a temporary directory. Windows: Make 'git help -a' work. Windows: Work around an oddity when a pipe with no reader is written to. Windows: Make the pager work. When installing, be prepared that template_dir may be relative. Windows: Use a relative default template_dir and ETC_GITCONFIG Windows: Compute the fallback for exec_path from the program invocation. Turn builtin_exec_path into a function. Windows: Use a customized struct stat that also has the st_blocks member. Windows: Add a custom implementation for utime(). Windows: Add a new lstat and fstat implementation based on Win32 API. Windows: Implement a custom spawnve(). Windows: Implement wrappers for gethostbyname(), socket(), and connect(). Windows: Work around incompatible sort and find. Windows: Implement asynchronous functions as threads. Windows: Disambiguate DOS style paths from SSH URLs. Windows: A rudimentary poll() emulation. Windows: Implement start_command(). ...
2008-06-27help: check early if we have a command, if not try a documentation topicLibravatar Christian Couder1-8/+14
Before this patch, something like "git help tutorial" did not work, people had to use "git help gittutorial" which is not very intuitive. This patch uses the "is_git_command" function to test early if the argument passed to "git help" is a git command, and if this is not the case then we prefix the argument with "git" instead of "git-". This way, things like "git help tutorial" or "git help glossary" will work fine. The little downside of this patch is that the "is_git_command" is a little bit slow. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-26Windows: Make 'git help -a' work.Libravatar Johannes Sixt1-5/+28
git help -a scans the PATH for git commands. On Windows it failed for two reasons: - The PATH separator is ';', not ':' on Windows. - stat() does not set the executable bit. We now open the file and guess whether it is executable. The result of the guess is good enough for the list of git commands, but it is of no use for a general stat() implementation because (1) it is a guess, (2) the user has no way to influence the outcome (via chmod or similar), and (3) it would reduce stat() performance by an unacceptable amount. Therefore, this strategy is a special-case local to help.c. Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
2008-06-06Print info about "git help COMMAND" on git's main usage pagesLibravatar Teemu Likonen1-0/+2
Git's main usage pages did not show "git help" as a way to get more information on a specific subcommand. This patch adds an info line after the list of git commands currently printed by "git", "git help", "git --help" and "git help --all". Signed-off-by: Teemu Likonen <tlikonen@iki.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-14Provide git_config with a callback-data parameterLibravatar Johannes Schindelin1-3/+3
git_config() only had a function parameter, but no callback data parameter. This assumes that all callback functions only modify global variables. With this patch, every callback gets a void * parameter, and it is hoped that this will help the libification effort. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-26help: use "man.<tool>.cmd" as custom man viewer commandLibravatar Christian Couder1-18/+40
Currently "git help -m GITCMD" is restricted to a set of man viewers defined at compile time. You can subvert the "man.<tool>.path" to force "git help -m" to use a different man, viewer, but if you have a man viewer whose invocation syntax does not match one of the current tools then you would have to write a wrapper script for it. This patch adds a git config variable "man.<tool>.cmd" which allows a more flexible man viewer choice. If you run "git help -m GITCMD" with the "man.viewer" config variable set to an unrecognized tool then it will query the "man.<tool>.cmd" config variable. If this variable exists, then the specified tool will be treated as a custom man viewer and it will be run in a shell with the man page name of the GITCMD added as extra parameter. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-26help: use man viewer path from "man.<tool>.path" config varLibravatar Christian Couder1-19/+124
This patch implements reading values from "man.<tool>.path" configuration variables, and using these values as pathes to the man viewer <tool>s when lauching them. This makes it possible to use different version of the tools than the one on the current PATH, or maybe a custom script. In this patch we also try to launch "konqueror" using "kfmclient" even if a path to a konqueror binary is given in "man.konqueror.path". The "man_viewer_list" becomes a simple string list to simplify things for the following patches. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-01help: Add a missing OPT_END().Libravatar Christian Couder1-0/+1
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-12help: warn if specified 'man.viewer' is unsupported, instead of erroring outLibravatar Christian Couder1-1/+1
When a document viewer that is unknown to the current version of git is specified in the .git/config file, instead of erroring out the process entirely, just issue a warning. It might be that the user usually is using a newer git that supports it (and the configuration is written for that version) but is temporarily using an older git that does not know the viewer. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-11help: implement multi-valued "man.viewer" config optionLibravatar Christian Couder1-78/+113
This allows multiple viewer candidates to be listed in the configuration file, like this: [man] viewer = woman viewer = konqueror viewer = man The candidates are tried in the order listed in the configuration file, and the first suitable one (e.g. konqueror cannot be used outside windowed environment) is used. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Tested-by: Xavier Maillard <xma@gnu.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-11help: add "man.viewer" config var to use "woman" or "konqueror"Libravatar Christian Couder1-1/+80
This patch makes it possible to view man pages using other tools than the "man" program. It also implements support for emacs' "woman" and konqueror with the man KIO slave to view man pages. Note that "emacsclient" is used with option "-e" to launch "woman" on emacs and this works only on versions >= 22. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Tested-by: Xavier Maillard <xma@gnu.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-24help: respect aliasesLibravatar Jeff King1-1/+32
If we have an alias "foo" defined, then the help text for "foo" (via "git help foo" or "git foo --help") now shows the definition of the alias. Before showing an alias definition, we make sure that there is no git command which would override the alias (so that even though you may have a "log" alias, even though it will not work, we don't want to it supersede "git help log"). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-24help: use parseoptLibravatar Jeff King1-64/+59
This patch converts cmd_help to use parseopt, along with a few style cleanups, including: - enum constants are now ALL_CAPS - parse_help_format returns an enum value rather than setting a global as a side effect Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-17help.c: use 'git_config_string' to get 'help_default_format'.Libravatar Christian Couder1-6/+2
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-16Merge branch 'cc/browser'Libravatar Junio C Hamano1-1/+17
* cc/browser: Documentation: add 'git-web--browse.txt' and simplify other docs. git-web--browse: fix misplaced quote in init_browser_path() web--browse: Add a few quotes in 'init_browser_path'. Documentation: instaweb: add 'git-web--browse' information. Adjust .gitignore for 5884f1(Rename 'git-help--browse.sh'...) git-web--browse: do not start the browser with nohup instaweb: use 'git-web--browse' to launch browser. Rename 'git-help--browse.sh' to 'git-web--browse.sh'. help--browse: add '--config' option to check a config option for a browser. help: make 'git-help--browse' usable outside 'git-help'. Conflicts: git-web--browse.sh
2008-02-11help.c: guard config parser from value=NULLLibravatar Junio C Hamano1-0/+2
help.format configuration expects a string value Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-05Rename 'git-help--browse.sh' to 'git-web--browse.sh'.Libravatar Christian Couder1-1/+1
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-05help--browse: add '--config' option to check a config option for a browser.Libravatar Christian Couder1-1/+1
The value of this new command line option will be used as a key to check the configuration for an help browser. This should remove the last bit in 'git-help--browse' that was specific to 'git-help', so that other git command can use 'git-help--browse'. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-05help: make 'git-help--browse' usable outside 'git-help'.Libravatar Christian Couder1-1/+17
"git-help--browse" helper is to launch a browser of the user's choice to view the HTML version of git documentation for a given command. It used to take the name of a command, convert it to the path of the documentation by prefixing the directory name and appending the ".html" suffix, and start the browser on the path. This updates the division of labor between the caller in help.c and git-help--browser helper. The helper is now responsible for launching a browser of the user's choice on given URLs, and it is the caller's responsibility to tell it the paths to documentation files. This is in preparation to reuse the logic to choose user's preferred browser in instaweb. The helper had a provision for running it without any command name, in which case it showed the toplevel "git(7)" documentation, but the caller in help.c never makes such a call. The helper now exits with a usage message when no path is given. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-16rename git-browse--help to git-help--browseLibravatar Jeff King1-1/+1
The convention for helper scripts has been git-$TOOL--$HELPER. Since this is a "browse" helper for the "help" tool, git-help--browse is a more sensible name. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-14Rename git-browse-help helper to git-browse--helpLibravatar Junio C Hamano1-1/+1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-14git-help: add "help.format" config variable.Libravatar Christian Couder1-2/+62
This config variable makes it possible to choose the default format used to display help. This format will be used only if no option like -a|--all|-i|--info|-m|--man|-w|--web is passed to "git-help". The following values are possible for this variable: - "man" --> "man" program is used - "info" --> "info" program is used - "web" --> "git-browse-help" is used By default we still show help using "man". This patch also adds -m|--man command line option to use "man" to allow overriding the "help.format" configuration variable. Note that this patch also revert some recent changes in "git-browse-help" because they prevented to look for config variables in the global configuration file. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-10git-help -i: show info documentation from matching version of gitLibravatar Junio C Hamano1-0/+1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-10git-help -i: invoke info with document and node nameLibravatar Junio C Hamano1-1/+1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-10Merge branch 'master' into cc/helpLibravatar Junio C Hamano1-0/+22
This is to primarily pull in MANPATH tweak and help.txt formatting fix from the master branch.
2007-12-09git-help: add -w|--web option to display html man page in a browser.Libravatar Christian Couder1-15/+19
Now when using "git help -w cmd", we will try to show the HTML man page "git-cmd.html" in your prefered web browser. To do that "help.c" code will call a new shell script "git-browse-help". This currently works only if the HTML versions of the man page have been installed in $(htmldir) (typically "/usr/share/doc/git-doc"), so new target to do that is added to "Documentation/Makefile". The browser to use can be configured using the "web.browser" config variable. We try to open a new tab in an existing web browser, if possible. The code in "git-browse-help" is heavily stolen from "git-mergetool" by Theodore Y. Ts'o. Thanks. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-08Let git-help prefer man-pages installed with this version of gitLibravatar Sergei Organov1-0/+22
Prepend $(prefix)/share/man to the MANPATH environment variable before invoking 'man' from help.c:show_man_page(). There may be other git documentation in the user's MANPATH but the user is asking a specific instance of git about its own documentation, so we'd better show the documentation for _that_ instance of git. Signed-off-by: Sergei Organov <osv@javad.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-03git-help: add -i|--info option to display info page.Libravatar Christian Couder1-8/+27
"git help --info subcommand" will now call "info git-subcommand". Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-01Merge branch 'tt/help'Libravatar Junio C Hamano1-1/+0
* tt/help: Remove hint to use "git help -a" Make the list of common commands more exclusive
2007-11-14Move #include <sys/select.h> and <sys/ioctl.h> to git-compat-util.h.Libravatar Johannes Sixt1-1/+0
... since all system headers are pulled in via git-compat-util.h Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-14Remove hint to use "git help -a"Libravatar Theodore Ts'o1-1/+0
The newbie user will run away screaming when they see all possible commands. The expert user will already know about the -a option from reading the git man page. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-08Style: place opening brace of a function definition at column 1Libravatar Junio C Hamano1-1/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-10-29include $PATH in generating list of commands for "help -a"Libravatar Scott R Parish1-37/+120
Git had previously been using the $PATH for scripts--a previous patch moved exec'ed commands to also use the $PATH. For consistency "help -a" should also list commands in the $PATH. The main commands are still listed from the git_exec_path(), but the $PATH is walked and other git commands (probably extensions) are listed. Signed-off-by: Scott R Parish <srp@srparish.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-10-29list_commands(): simplify code by using chdir()Libravatar Scott R Parish1-15/+3
The current code builds absolute path strings for each file to stat(), this can easily be avoided by chdir()ing into the directory. Signed-off-by: Scott R Parish <srp@srparish.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-10-29remove unused/unneeded "pattern" argument of list_commandsLibravatar Scott R Parish1-6/+8
list_commands() currently accepts and ignores a "pattern" argument, and then hard codes a prefix as well as some magic numbers. This hardcodes the prefix inside of the function and removes the magic numbers. Signed-off-by: Scott R Parish <srp@srparish.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>