| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The http-backend (used for smart-http transport) used to slurp the
whole input until EOF, without paying attention to CONTENT_LENGTH
that is supplied in the environment and instead expecting the Web
server to close the input stream. This has been fixed.
* mk/http-backend-content-length:
t5562: avoid non-portable "export FOO=bar" construct
http-backend: respect CONTENT_LENGTH for receive-pack
http-backend: respect CONTENT_LENGTH as specified by rfc3875
http-backend: cleanup writing to child process
|
|
Push passes to another commands, as described in
https://public-inbox.org/git/20171129032214.GB32345@sigill.intra.peff.net/
As it gets complicated to correctly track the data length, instead transfer
the data through parent process and cut the pipe as the specified length is
reached. Do it only when CONTENT_LENGTH is set, otherwise pass the input
directly to the forked commands.
Add tests for cases:
* CONTENT_LENGTH is set, script's stdin has more data, with all combinations
of variations: fetch or push, plain or compressed body, correct or truncated
input.
* CONTENT_LENGTH is specified to a value which does not fit into ssize_t.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The list of commands with their various attributes were spread
across a few places in the build procedure, but it now is getting a
bit more consolidated to allow more automation.
* nd/command-list:
completion: allow to customize the completable command list
completion: add and use --list-cmds=alias
completion: add and use --list-cmds=nohelpers
Move declaration for alias.c to alias.h
completion: reduce completable command list
completion: let git provide the completable command list
command-list.txt: documentation and guide line
help: use command-list.txt for the source of guides
help: add "-a --verbose" to list all commands with synopsis
git: support --list-cmds=list-<category>
completion: implement and use --list-cmds=main,others
git --list-cmds: collect command list in a string_list
git.c: convert --list-* to --list-cmds=*
Remove common-cmds.h
help: use command-list.h for common command list
generate-cmds.sh: export all commands to command-list.h
generate-cmds.sh: factor out synopsis extract code
|
|
The new help option --config-for-completion is a machine friendlier
version of --config where all the placeholders and wildcards are
dropped, leaving only the good, completable prefixes for
git-completion.bash to consume.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Sometimes it helps to list all available config vars so the user can
search for something they want. The config man page can also be used
but it's harder to search if you want to focus on the variable name,
for example.
This is not the best way to collect the available config since it's
not precise. Ideally we should have a centralized list of config in C
code (pretty much like 'struct option'), but that's a lot more work.
This will do for now.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* nd/command-list:
completion: allow to customize the completable command list
completion: add and use --list-cmds=alias
completion: add and use --list-cmds=nohelpers
Move declaration for alias.c to alias.h
completion: reduce completable command list
completion: let git provide the completable command list
command-list.txt: documentation and guide line
help: use command-list.txt for the source of guides
help: add "-a --verbose" to list all commands with synopsis
git: support --list-cmds=list-<category>
completion: implement and use --list-cmds=main,others
git --list-cmds: collect command list in a string_list
git.c: convert --list-* to --list-cmds=*
Remove common-cmds.h
help: use command-list.h for common command list
generate-cmds.sh: export all commands to command-list.h
generate-cmds.sh: factor out synopsis extract code
|
|
By default we show porcelain, external commands and a couple others
that are also popular. If you are not happy with this list, you can
now customize it a new config variable.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The help command currently hard codes the list of guides and their
summary in C. Let's move this list to command-list.txt. This lets us
extract summary lines from Documentation/git*.txt. This also
potentially lets us list guides in git.txt, but I'll leave that for
now.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This lists all recognized commands [1] by category. The group order
follows closely git.txt.
[1] We may actually show commands that are not built (e.g. if you set
NO_PERL you don't have git-instaweb but it's still listed here). I
ignore the problem because on Linux a git package could be split
anyway. The "git-core" package may not contain git-instaweb even if
it's built because it may end up in a separate package. We can't know
anyway.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows us to select any group of commands by a category defined
in command-list.txt. This is an internal/hidden option so we don't
have to be picky about the category name or worried about exposing too
much.
This will be used later by git-completion.bash to retrieve certain
command groups.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is part of the effort to break down and provide commands by
category in machine-readable form. This could be helpful later on when
completion script switches to use --list-cmds for selecting
completable commands. It would be much easier for the user to choose
to complete _all_ commands instead of the default selection by passing
different values to --list-cmds in git-completino.bash.
While at there, replace "git help -a" in git-completion.bash with
--list-cmds since it's better suited for this task.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous commit added code generation for all_cmd_desc[] which
includes almost everything we need to generate common command list.
Convert help code to use that array instead and drop common_cmds[] array.
The description of each common command group is removed from
command-list.txt. This keeps this file format simpler. common-cmds.h
will not be generated correctly after this change due to the
command-list.txt format change. But it does not matter and
common-cmds.h will be removed.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is more consistent with the project style. The majority of Git's
source files use dashes in preference to underscores in their file names.
Signed-off-by: Stefan Beller <sbeller@google.com>
|
|
In particular when local tags are used (or tags that are pushed to some
fork) to build Git, it is very hard to figure out from which particular
revision a particular Git executable was built. It gets worse when those
tags are deleted, or even updated.
Let's just report an exact, unabbreviated commit name in our build
options.
We need to be careful, though, to report when the current commit cannot
be determined, e.g. when building from a tarball without any associated
Git repository. This could be the case also when extracting Git's source
code into an unrelated Git worktree.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It can be helpful for bug reports to include information about the
environment in which the bug occurs. "git version --build-options" can
help to supplement this information. In addition to the size of 'long'
already reported by --build-options, also report the host's CPU type.
Example output:
$ git version --build-options
git version 2.9.3.windows.2.826.g06c0f2f
cpu: x86_64
sizeof-long: 4
New Makefile variable HOST_CPU supports cross-compiling.
Suggested-by: Adric Norris <landstander668@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Message update.
* mb/reword-autocomplete-message:
auto-correct: tweak phrasing
|
|
A common pattern to free a piece of memory and assign NULL to the
pointer that used to point at it has been replaced with a new
FREE_AND_NULL() macro.
* ab/free-and-null:
*.[ch] refactoring: make use of the FREE_AND_NULL() macro
coccinelle: make use of the "expression" FREE_AND_NULL() rule
coccinelle: add a rule to make "expression" code use FREE_AND_NULL()
coccinelle: make use of the "type" FREE_AND_NULL() rule
coccinelle: add a rule to make "type" code use FREE_AND_NULL()
git-compat-util: add a FREE_AND_NULL() wrapper around free(ptr); ptr = NULL
|
|
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
|
|
The code to pick up and execute command alias definition from the
configuration used to switch to the top of the working tree and
then come back when the expanded alias was executed, which was
unnecessarilyl complex. Attempt to simplify the logic by using the
early-config mechanism that does not chdir around.
* js/alias-early-config:
alias: use the early config machinery to expand aliases
t7006: demonstrate a problem with aliases in subdirectories
t1308: relax the test verifying that empty alias values are disallowed
help: use early config when autocorrecting aliases
config: report correct line number upon error
discover_git_directory(): avoid setting invalid git_dir
|
|
When help.autoCorrect is enabled, an invalid git command prints a
warning and a continuation message, which differs depending on
whether or not the value of help.autoCorrect is positive or
negative.
With help.autoCorrect = 15:
WARNING: You called a Git command named 'lgo', which does not exist.
Continuing under the assumption that you meant 'log'
in 1.5 seconds automatically...
With help.autoCorrect < 0:
WARNING: You called a Git command named 'lgo', which does not exist.
Continuing under the assumption that you meant 'log'
The continuation message's phrasing is awkward. This commit cleans it up.
As a bonus, we now use full-sentence strings which make translation easier.
With help.autoCorrect = 15:
WARNING: You called a Git command named 'lgo', which does not exist.
Continuing in 1.5 seconds, assuming that you meant 'log'.
With help.autoCorrect < 0:
WARNING: You called a Git command named 'lgo', which does not exist.
Continuing under the assumption that you meant 'log'.
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git $cmd -h" for builtin commands calls the implementation of the
command (i.e. cmd_$cmd() function) without doing any repository
set-up, and the commands that expect RUN_SETUP is done by the Git
potty needs to be prepared to show the help text without barfing.
* jk/consistent-h:
t0012: test "-h" with builtins
git: add hidden --list-builtins option
version: convert to parse-options
diff- and log- family: handle "git cmd -h" early
submodule--helper: show usage for "-h"
remote-{ext,fd}: print usage message on invalid arguments
upload-archive: handle "-h" option early
credential: handle invalid arguments earlier
|
|
Replace occurrences of `free(ptr); ptr = NULL` which weren't caught by
the coccinelle rule. These fall into two categories:
- free/NULL assignments one after the other which coccinelle all put
on one line, which is functionally equivalent code, but very ugly.
- manually spotted occurrences where the NULL assignment isn't right
after the free() call.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git has this feature which suggests similar commands (including aliases)
in case the user specified an unknown command.
This feature currently relies on a side effect of the way we expand
aliases right now: when a command is not a builtin, we use the regular
config machinery (meaning: discovering the .git/ directory and
initializing global state such as the config cache) to see whether the
command refers to an alias.
However, we will change the way aliases are expanded in the next
commits, to use the early config instead. That means that the
autocorrect feature can no longer discover the available aliases by
looking at the config cache (because it has not yet been initialized).
So let's just use the early config machinery instead.
This is slightly less performant than the previous way, as the early
config is used *twice*: once to see whether the command refers to an
alias, and then to see what aliases are most similar. However, this is
hardly a performance-critical code path, so performance is less important
here.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "git version" command didn't traditionally accept any
options, and in fact ignores any you give it. When we added
simple option parsing for "--build-options" in 6b9c38e14, we
didn't improve this; we just loop over the arguments and
pick out the one we recognize.
Instead, let's move to a real parsing loop, complain about
nonsense options, and recognize conventions like "-h".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "run-command" API implementation has been made more robust
against dead-locking in a threaded environment.
* bw/forking-and-threading:
usage.c: drop set_error_handle()
run-command: restrict PATH search to executable files
run-command: expose is_executable function
run-command: block signals between fork and execve
run-command: add note about forking and threading
run-command: handle dup2 and close errors in child
run-command: eliminate calls to error handling functions in child
run-command: don't die in child when duping /dev/null
run-command: prepare child environment before forking
string-list: add string_list_remove function
run-command: use the async-signal-safe execv instead of execvp
run-command: prepare command before forking
t0061: run_command executes scripts without a #! line
t5550: use write_script to generate post-update hook
|
|
There has been a bug report by a corporate user that stated that
"spelling mistake of stash followed by a yes prints character 'y'
infinite times."
This analysis was false. When the spelling of a command contains
errors, the git program tries to help the user by providing candidates
which are close to the unexisting command. E.g Git prints the
following:
git: 'stahs' is not a git command. See 'git --help'.
Did you mean this?
stash
and then exits.
The problem with this hint is that it is not formally indicated as an
hint and the user is in fact encouraged to reply to the question,
whereas the Git command is already finished.
The user was unlucky enough that it was the command he was looking
for, and replied "yes" on the command line, effectively launching the
`yes` program.
The initial error is that the Git programs, when launched in
command-line mode (without interaction) must not ask questions,
because these questions would normally require a user input as a reply
that they won't handle indeed. That's a source of confusion on UX
level.
To improve the general usability of the Git suite, the following rule
was applied:
if the sentence
* appears in a non-interactive session
* is printed last before exit
* is a question addressing the user ("you")
the sentence is turned into affirmative and proposes the option.
The basic rewording of the question sentences has been extended to
other spots found in the source.
Requested at https://github.com/git/git-scm.com/issues/999 by rpai1
Signed-off-by: Jean-Noel Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the logic for 'is_executable()' from help.c to run_command.c and
expose it so that callers from outside help.c can access the function.
This is to enable run-command to be able to query if a file is
executable in a future patch.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On Windows, executables need to have the file extension `.exe`, or they
are not executables. Hence, to support scripts, Git for Windows also
looks for a she-bang line by opening the file in question, and executing
it via the specified script interpreter.
To figure out whether files in the `PATH` are executable, `git help` has
code that imitates this behavior. With one exception: it *always* opens
the files and looks for a she-bang line *or* an `MZ` tell-tale
(nevermind that files with the magic `MZ` but without file extension
`.exe` would still not be executable).
Opening this many files leads to performance problems that are even more
serious when a virus scanner is running. Therefore, let's change the
code to look for the file extension `.exe` early, and avoid opening the
file altogether if we already know that it is executable.
See the following measurements (in seconds) as an example, where we
execute a simple program that simply lists the directory contents and
calls open() on every listed file:
With virus scanner running (coldcache):
$ ./a.exe /libexec/git-core/
before open (git-add.exe): 0.000000
after open (git-add.exe): 0.412873
before open (git-annotate.exe): 0.000175
after open (git-annotate.exe): 0.397925
before open (git-apply.exe): 0.000243
after open (git-apply.exe): 0.399996
before open (git-archive.exe): 0.000147
after open (git-archive.exe): 0.397783
before open (git-bisect--helper.exe): 0.000160
after open (git-bisect--helper.exe): 0.397700
before open (git-blame.exe): 0.000160
after open (git-blame.exe): 0.399136
...
With virus scanner running (hotcache):
$ ./a.exe /libexec/git-core/
before open (git-add.exe): 0.000000
after open (git-add.exe): 0.000325
before open (git-annotate.exe): 0.000229
after open (git-annotate.exe): 0.000177
before open (git-apply.exe): 0.000167
after open (git-apply.exe): 0.000150
before open (git-archive.exe): 0.000154
after open (git-archive.exe): 0.000156
before open (git-bisect--helper.exe): 0.000132
after open (git-bisect--helper.exe): 0.000180
before open (git-blame.exe): 0.000718
after open (git-blame.exe): 0.000724
...
With this patch I get:
$ time git help git
Launching default browser to display HTML ...
real 0m8.723s
user 0m0.000s
sys 0m0.000s
and without
$ time git help git
Launching default browser to display HTML ...
real 1m37.734s
user 0m0.000s
sys 0m0.031s
both tests with cold cache and giving the machine some time to settle
down after restart.
[jes: adjusted the commit message]
Signed-off-by: Heiko Voigt <heiko.voigt@mahr.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply the semantic patch contrib/coccinelle/qsort.cocci to the code
base, replacing calls of qsort(3) with QSORT. The resulting code is
shorter and supports empty arrays with NULL pointers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git's source code refers to timestamps as unsigned longs. On 32-bit
platforms, as well as on Windows, unsigned long is not large enough
to capture dates that are "absurdly far in the future".
While we can fix this issue properly by replacing unsigned long with
a larger type, we want to be a bit more conservative and just skip
those tests on the maint track.
Signed-off-by: Jeff King <peff@peff.net>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using FLEX_ARRAY macros reduces the amount of manual
computation size we have to do. It also ensures we don't
overflow size_t, and it makes sure we write the same number
of bytes that we allocated.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Portability fix.
* js/sleep-without-select:
lockfile: wait using sleep_millisec() instead of select()
lockfile: convert retry timeout computations to millisecond
help.c: wrap wait-only poll() invocation in sleep_millisec()
lockfile: replace random() by rand()
|
|
We want to use the new function elsewhere in a moment.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
for_each_ref() callback functions were taught to name the objects
not with "unsigned char sha1[20]" but with "struct object_id".
* bc/object-id: (56 commits)
struct ref_lock: convert old_sha1 member to object_id
warn_if_dangling_symref(): convert local variable "junk" to object_id
each_ref_fn_adapter(): remove adapter
rev_list_insert_ref(): remove unneeded arguments
rev_list_insert_ref_oid(): new function, taking an object_oid
mark_complete(): remove unneeded arguments
mark_complete_oid(): new function, taking an object_oid
clear_marks(): rewrite to take an object_id argument
mark_complete(): rewrite to take an object_id argument
send_ref(): convert local variable "peeled" to object_id
upload-pack: rewrite functions to take object_id arguments
find_symref(): convert local variable "unused" to object_id
find_symref(): rewrite to take an object_id argument
write_one_ref(): rewrite to take an object_id argument
write_refs_to_temp_dir(): convert local variable sha1 to object_id
submodule: rewrite to take an object_id argument
shallow: rewrite functions to take object_id arguments
handle_one_ref(): rewrite to take an object_id argument
add_info_ref(): rewrite to take an object_id argument
handle_one_reflog(): rewrite to take an object_id argument
...
|
|
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change typedef each_ref_fn to take a "const struct object_id *oid"
parameter instead of "const unsigned char *sha1".
To aid this transition, implement an adapter that can be used to wrap
old-style functions matching the old typedef, which is now called
"each_ref_sha1_fn"), and make such functions callable via the new
interface. This requires the old function and its cb_data to be
wrapped in a "struct each_ref_fn_sha1_adapter", and that object to be
used as the cb_data for an adapter function, each_ref_fn_adapter().
This is an enormous diff, but most of it consists of simple,
mechanical changes to the sites that call any of the "for_each_ref"
family of functions. Subsequent to this change, the call sites can be
rewritten one by one to use the new interface.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git help' shows common commands in alphabetical order:
The most commonly used git commands are:
add Add file contents to the index
bisect Find by binary search the change that introduced a bug
branch List, create, or delete branches
checkout Checkout a branch or paths to the working tree
clone Clone a repository into a new directory
commit Record changes to the repository
[...]
without any indication of how commands relate to high-level
concepts or each other. Revise the output to explain their relationship
with the typical Git workflow:
These are common Git commands used in various situations:
start a working area (see also: git help tutorial)
clone Clone a repository into a new directory
init Create an empty Git repository or reinitialize [...]
work on the current change (see also: git help everyday)
add Add file contents to the index
reset Reset current HEAD to the specified state
examine the history and state (see also: git help revisions)
log Show commit logs
status Show the working tree status
[...]
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Sébastien Guimmara <sebastien.guimmara@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* sb/help-unknown-command-sort-fix:
help: fix the size passed to qsort
|
|
We actually want to have the size of one 'name' and not the size
of the pointer.
Signed-off-by: Stefan Beller <stefanbeller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/strip-suffix:
prepare_packed_git_one: refactor duplicate-pack check
verify-pack: use strbuf_strip_suffix
strbuf: implement strbuf_strip_suffix
index-pack: use strip_suffix to avoid magic numbers
use strip_suffix instead of ends_with in simple cases
replace has_extension with ends_with
implement ends_with via strip_suffix
add strip_suffix function
sha1_file: replace PATH_MAX buffer with strbuf in prepare_packed_git_one()
|
|
When stripping a suffix like:
if (ends_with(str, "foo"))
buf = xmemdupz(str, strlen(str) - 3);
we can instead use strip_suffix to avoid the constant 3,
which must match the literal "foo" (we sometimes use
strlen("foo") instead, but that means we are repeating
ourselves). The example above becomes:
if (strip_suffix(str, "foo", &len))
buf = xmemdupz(str, len);
This also saves a strlen(), since we calculate the string
length when detecting the suffix.
Note that in some cases we also switch from xstrndup to
xmemdupz, which saves a further strlen call.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These two are almost the same function, with the exception
that has_extension only matches if there is content before
the suffix. So ends_with(".exe", ".exe") is true, but
has_extension would not be.
This distinction does not matter to any of the callers,
though, and we can just replace uses of has_extension with
ends_with. We prefer the "ends_with" name because it is more
generic, and there is nothing about the function that
requires it to be used for file extensions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some cases, we use starts_with to check for a prefix, and
then use an already-calculated prefix length to advance a
pointer past the prefix. There are no magic numbers or
duplicated strings here, but we can still make the code
simpler and more obvious by using skip_prefix.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's a common idiom to match a prefix and then skip past it
with strlen, like:
if (starts_with(foo, "bar"))
foo += strlen("bar");
This avoids magic numbers, but means we have to repeat the
string (and there is no compiler check that we didn't make a
typo in one of the strings).
We can use skip_prefix to handle this case without repeating
ourselves.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's a common idiom to match a prefix and then skip past it
with a magic number, like:
if (starts_with(foo, "bar"))
foo += 3;
This is easy to get wrong, since you have to count the
prefix string yourself, and there's no compiler check if the
string changes. We can use skip_prefix to avoid the magic
numbers here.
Note that some of these conversions could be much shorter.
For example:
if (starts_with(arg, "--foo=")) {
bar = arg + 6;
continue;
}
could become:
if (skip_prefix(arg, "--foo=", &bar))
continue;
However, I have left it as:
if (skip_prefix(arg, "--foo=", &v)) {
bar = v;
continue;
}
to visually match nearby cases which need to actually
process the string. Like:
if (skip_prefix(arg, "--foo=", &v)) {
bar = atoi(v);
continue;
}
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rt/help-pretty-prints-cmd-names:
help.c: rename function "pretty_print_string_list"
|
|
The part "string_list" of the name of function
"pretty_print_string_list" is just an implementation
detail. The function pretty-prints command names so
rename it to "pretty_print_cmdnames".
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit adbc0b6b ("cygwin: Use native Win32 API for stat", 30-09-2008)
added a Win32 specific implementation of the stat functions. In order
to handle absolute paths, cygwin mount points and symbolic links, this
implementation may fall back on the standard cygwin l/stat() functions.
Also, the choice of cygwin or Win32 functions is made lazily (by the
first call(s) to l/stat) based on the state of some config variables.
Unfortunately, this "schizophrenic stat" implementation has been the
source of many problems ever since. For example, see commits 7faee6b8,
79748439, 452993c2, 085479e7, b8a97333, 924aaf3e, 05bab3ea and 0117c2f0.
In order to avoid further problems, such as the issue raised by the new
reference handling API, remove the Win32 l/stat() implementation.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Max Kirillov
Nguyễn Thái Ngọc Duy
Stefan Beller
Johannes Schindelin
Eric Sunshine
Marc Branchaud
Ævar Arnfjörð Bjarmason
Brandon Williams
Jeff King
Jean-Noel Avila
Heiko Voigt
René Scharfe
Johannes Sixt
Michael Haggerty
Sébastien Guimmara
Stefan Beller
Ralf Thielow
Christian Couder
Ramsay Jones