| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Simplify the parsing of "grep.patternType" and
"grep.extendedRegexp". This changes no behavior, but gets rid of
complex parsing logic that isn't needed anymore.
When "grep.patternType" was introduced in 84befcd0a4a (grep: add a
grep.patternType configuration setting, 2012-08-03) we promised that:
1. You can set "grep.patternType", and "[setting it to] 'default'
will return to the default matching behavior".
In that context "the default" meant whatever the configuration
system specified before that change, i.e. via grep.extendedRegexp.
2. We'd support the existing "grep.extendedRegexp" option, but ignore
it when the new "grep.patternType" option is set. We said we'd
only ignore the older "grep.extendedRegexp" option "when the
`grep.patternType` option is set to a value other than
'default'".
In a preceding commit we changed grep_config() to be called after
grep_init(), which means that much of the complexity here can go
away.
As before both "grep.patternType" and "grep.extendedRegexp" are
last-one-wins variable, with "grep.extendedRegexp" yielding to
"grep.patternType", except when "grep.patternType=default".
Note that as the previously added tests indicate this cannot be done
on-the-fly as we see the config variables, without introducing more
state keeping. I.e. if we see:
-c grep.extendedRegexp=false
-c grep.patternType=default
-c extendedRegexp=true
We need to select ERE, since grep.patternType=default unselects that
variable, which normally has higher precedence, but we also need to
select BRE in cases of:
-c grep.extendedRegexp=true \
-c grep.extendedRegexp=false
Which would not be the case for this, which select ERE:
-c grep.patternType=extended \
-c grep.extendedRegexp=false
Therefore we cannot do this on-the-fly in grep_config without also
introducing tracking variables for not only the pattern type, but what
the source of that pattern type was.
So we need to decide on the pattern after our config was fully
parsed. Let's do that by deferring the decision on the pattern type
until it's time to compile it in compile_regexp().
By that time we've not only parsed the config, but also handled the
command-line options. Those will set "opt.pattern_type_option" (*not*
"opt.extended_regexp_option"!).
At that point all we need to do is see if "grep.patternType" was
UNSPECIFIED in the end (including an explicit "=default"), if so we'll
use the "grep.extendedRegexp" configuration, if any.
See my 07a3d411739 (grep: remove regflags from the public grep_opt
API, 2017-06-29) for addition of the two comments being removed here,
i.e. the complexity noted in that commit is now going away.
1. https://lore.kernel.org/git/patch-v8-09.10-c211bb0c69d-20220118T155211Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the "pattern_type_option" member of "struct grep_opt" to use
the enum type we use for it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The grep_init() function used the odd pattern of initializing the
passed-in "struct grep_opt" with a statically defined "grep_defaults"
struct, which would be modified in-place when we invoked
grep_config().
So we effectively (b) initialized config, (a) then defaults, (c)
followed by user options. Usually those are ordered as "a", "b" and
"c" instead.
As the comments being removed here show the previous behavior needed
to be carefully explained as we'd potentially share the populated
configuration among different instances of grep_init(). In practice we
didn't do that, but now that it can't be a concern anymore let's
remove those comments.
This does not change the behavior of any of the configuration
variables or options. That would have been the case if we didn't move
around the grep_config() call in "builtin/log.c". But now that we call
"grep_config" after "git_log_config" and "git_format_config" we'll
need to pass in the already initialized "struct grep_opt *".
See 6ba9bb76e02 (grep: copy struct in one fell swoop, 2020-11-29) and
7687a0541e0 (grep: move the configuration parsing logic to grep.[ch],
2012-10-09) for the commits that added the comments.
The memcpy() pattern here will be optimized away and follows the
convention of other *_init() functions. See 5726a6b4012 (*.c *_init():
define in terms of corresponding *_INIT macro, 2021-07-01).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change code in "builtin/grep.c" and "builtin/ls-tree.c" to trust the
"prefix" passed from "run_builtin()". The "prefix" we get from setup.c
is either going to be NULL or a string of length >0, never "".
So we can drop the "prefix && *prefix" checks added for
"builtin/grep.c" in 0d042fecf2f (git-grep: show pathnames relative to
the current directory, 2006-08-11), and for "builtin/ls-tree.c" in
a69dd585fca (ls-tree: chomp leading directories when run from a
subdirectory, 2005-12-23).
As seen in code in revision.c that was added in cd676a51367 (diff
--relative: output paths as relative to the current subdirectory,
2008-02-12) we already have existing code that does away with this
assertion.
This makes it easier to reason about a subsequent change to the
"prefix_length" code in grep.c in a subsequent commit, and since we're
going to the trouble of doing that let's leave behind an assert() to
promise this to any future callers.
For "builtin/grep.c" it would be painful to pass the "prefix" down the
callchain of:
cmd_grep -> grep_tree -> grep_submodule -> grep_cache -> grep_oid ->
grep_source_name
So for the code that needs it in grep_source_name() let's add a
"grep_prefix" variable similar to the existing "ls_tree_prefix".
While at it let's move the code in cmd_ls_tree() around so that we
assign to the "ls_tree_prefix" right after declaring the variables,
and stop assigning to "prefix". We only subsequently used that
variable later in the function after clobbering it. Let's just use our
own "grep_prefix" instead.
Let's also add an assert() in git.c, so that we'll make this promise
about the "prefix" to any current and future callers, as well as to
any readers of the code.
Code history:
* The strlen() in "grep.c" hasn't been used since 493b7a08d80 (grep:
accept relative paths outside current working directory, 2009-09-05).
When that code was added in 0d042fecf2f (git-grep: show pathnames
relative to the current directory, 2006-08-11) we used the length.
But since 493b7a08d80 we haven't used it for anything except a
boolean check that we could have done on the "prefix" member
itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This "regex_t" in grep_opt has not been used since
f9b9faf6f8a (builtin-grep: allow more than one patterns., 2006-05-02),
we still use a "regex_t" for compiling regexes, but that's in the
"grep_pat" struct".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The option --invert-grep is documented to filter out commits whose
messages match the --grep filters. However, it also affects the
header matches (--author, --committer), which is not intended.
Move the handling of that option to grep.c, as only the code there can
distinguish between matches in the header from those in the message
body. If --invert-grep is given then enable extended expressions (not
the regex type, we just need git grep's --not to work), negate the body
patterns and check if any of them match by piggy-backing on the
collect_hits mechanism of grep_source_1().
Collecting the matches in struct grep_opt is a bit iffy, but with
"last_shown" we have a precedent for writing state information to that
struct.
Reported-by: Dotan Cohen <dotancohen@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git log --grep=string --author=name" learns to highlight hits just
like "git grep string" does.
* hm/paint-hits-in-log-grep:
grep/pcre2: fix an edge case concerning ascii patterns and UTF-8 data
pretty: colorize pattern matches in commit messages
grep: refactor next_match() and match_one_pattern() for external use
|
|
"git grep --recurse-submodules" takes trees and blobs from the
submodule repository, but the textconv settings when processing a
blob from the submodule is not taken from the submodule repository.
A test is added to demonstrate the issue, without fixing it.
* mt/grep-submodule-textconv:
grep: demonstrate bug with textconv attributes and submodules
|
|
Remove external declaration of functions that no longer exist.
* ab/retire-decl-of-missing-unused-funcs:
config.h: remove unused git_config_get_untracked_cache() declaration
log-tree.h: remove unused function declarations
grep.h: remove unused grep_threads_ok() declaration
builtin.h: remove cmd_tar_tree() declaration
|
|
This function was removed in 0579f91dd74 (grep: enable threading with
-p and -W using lazy attribute lookup, 2011-12-12), but not its
corresponding *.h declaration.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These changes are made in preparation of, the colorization support for the
"git log" subcommands that, rely on regex functionality (i.e. "--author",
"--committer" and "--grep"). These changes are necessary primarily because
match_one_pattern() expects header lines to be prefixed, however, in
pretty, the prefixes are stripped from the lines because the name-email
pairs need to go through additional parsing, before they can be printed and
because next_match() doesn't handle the case of
"ctx == GREP_CONTEXT_HEAD" at all. So, teach next_match() how to handle the
new case and move match_one_pattern()'s core logic to
headerless_match_one_pattern() while preserving match_one_pattern()'s uses
that depend on the additional processing.
Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some circumstances, "git grep --textconv --recurse-submodules"
ignores the textconv attributes from the submodules and erroneously
applies the attributes defined in the superproject on the submodules'
files. The textconv cache is also saved on the superproject, even for
submodule objects.
A fix for these problems will probably require at least three changes:
- Some textconv and attributes functions (as well as their callees) will
have to be adjusted to work with arbitrary repositories. Note that
"fill_textconv()", for example, already receives a "struct repository"
but it writes the textconv cache using "write_loose_object()", which
implicitly works on "the_repository".
- grep.c functions will have to call textconv/userdiff routines passing
the "repo" field from "struct grep_source" instead of the one from
"struct grep_opt". The latter always points to "the_repository" on
"git grep" executions (see its initialization in builtin/grep.c), but
the former points to the correct repository that each source (an
object, file, or buffer) comes from.
- "userdiff_find_by_path()" might need to use a different attributes
stack for each repository it works on or reset its internal static
stack when the repository is changed throughout the calls.
For now, let's add some tests to demonstrate these problems, and also
update a NEEDSWORK comment in grep.h that mentions this bug to reference
the added tests.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our grep_buffer() function takes a non-const buffer, which is confusing:
we don't take ownership of nor write to the buffer.
This mostly comes from the fact that the underlying grep_source struct
in which we store the buffer uses non-const pointer. The memory pointed
to by the struct is sometimes owned by us (for FILE or OID sources), and
sometimes not (for BUF sources).
Let's store it as const, which lets us err on the side of caution (i.e.,
the compiler will warn us if any of our code writes to or tries to free
it).
As a result, we must annotate the one place where we do free it by
casting away the constness. But that's a small price to pay for the
extra safety and clarity elsewhere (and indeed, it already had a comment
explaining why GREP_SOURCE_BUF _didn't_ free it).
And then we can mark grep_buffer() as taking a const buffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Record the repository whenever an OID grep source is created, and teach
the worker threads to explicitly provide the repository when accessing
objects.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
grep_source_init() can create "struct grep_source" objects and,
depending on the value of the type passed, some void-pointer parameters have
different meanings. Because one of these types (GREP_SOURCE_OID) will
require an additional parameter in a subsequent patch, take the
opportunity to increase clarity and type safety by replacing this
function with individual functions for each type.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the setup of the "pcre2_general_context" to happen per-thread
in compile_pcre2_pattern() instead of in grep_init().
This change brings it in line with how the rest of the pcre2_* members
in the grep_pat structure are set up.
As noted in the preceding commit the approach 513f2b0bbd4 (grep: make
PCRE2 aware of custom allocator, 2019-10-16) took to allocate the
pcre2_general_context seems to have been initially based on a
misunderstanding of how PCREv2 memory allocation works.
The approach of creating a global context in grep_init() is just added
complexity for almost zero gain. On my system it's 24 bytes saved
per-thread. For comparison PCREv2 will then go on to allocate at least
a kilobyte for its own thread-local state.
As noted in 6d423dd542f (grep: don't redundantly compile throwaway
patterns under threading, 2017-05-25) the grep code is intentionally
not trying to micro-optimize allocations by e.g. sharing some PCREv2
structures globally, while making others thread-local.
So let's remove this special case and make all of them thread-local
again for simplicity. With this change we could move the
pcre2_{malloc,free} functions around to live closer to their current
use. I'm not doing that here to keep this change small, that cleanup
will be done in a follow-up commit.
See also the discussion in 94da9193a6 (grep: add support for PCRE v2,
2017-06-01) about thread safety, and Johannes's comments[1] to the
effect that we should be doing what this patch is doing.
1. https://lore.kernel.org/git/nycvar.QRO.7.76.6.1908052120302.46@tvgsbejvaqbjf.bet/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make use of the pcre2_maketables_free() function to free the memory
allocated by pcre2_maketables().
At first sight it's strange that 10da030ab75 (grep: avoid leak of
chartables in PCRE2, 2019-10-16) which added the free() call here
doesn't make use of the pcre2_free() the author introduced in the
preceding commit in 513f2b0bbd4 (grep: make PCRE2 aware of custom
allocator, 2019-10-16).
The reason is that at the time the function didn't exist. It was first
introduced in PCREv2 version 10.34, released on 2019-11-21.
Let's make use of it behind a macro. I don't think this matters for
anything to do with custom allocators, but it makes our use of PCREv2
more discoverable.
At some distant point in the future we'll be able to drop the version
guard, as nobody will be running a version older than 10.34.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace a use of pcre2_config(PCRE2_CONFIG_VERSION, ...) which I added
in 95ca1f987ed (grep/pcre2: better support invalid UTF-8 haystacks,
2021-01-24) with the same test done at compile-time.
It might be cuter to do this at runtime since we don't have to do the
"major >= 11 || (major >= 10 && ...)" test. But in the next commit
we'll add another version comparison that absolutely needs to be done
at compile-time, so we're better of being consistent across the board.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update support for invalid UTF-8 in PCRE2.
* ab/grep-pcre-invalid-utf8:
grep/pcre2: better support invalid UTF-8 haystacks
grep/pcre2 tests: don't rely on invalid UTF-8 data test
|
|
The support for deprecated PCRE1 library has been dropped.
* ab/retire-pcre1:
Remove support for v1 of the PCRE library
config.mak.uname: remove redundant NO_LIBPCRE1_JIT flag
|
|
Remove the hidden "grep --debug" and "log --grep-debug" options added
in 17bf35a3c7b (grep: teach --debug option to dump the parse tree,
2012-09-13).
At the time these options seem to have been intended to go along with
a documentation discussion and to help the author of relevant tests to
perform ad-hoc debugging on them[1].
Reasons to want this gone:
1. They were never documented, and the only (rather trivial) use of
them in our own codebase for testing is something I removed back
in e01b4dab01e (grep: change non-ASCII -i test to stop using
--debug, 2017-05-20).
2. Googling around doesn't show any in-the-wild uses I could dig up,
and on the Git ML the only mentions after the original discussion
seem to have been when they came up in unrelated diff contexts, or
that test commit of mine.
3. An exception to that is c581e4a7499 (grep: under --debug, show
whether PCRE JIT is enabled, 2019-08-18) where we added the
ability to dump out when PCREv2 has the JIT in effect.
The combination of that and my earlier b65abcafc7a (grep: use PCRE
v2 for optimized fixed-string search, 2019-07-01) means Git prints
this out in its most common in-the-wild configuration:
$ git log --grep-debug --grep=foo --grep=bar --grep=baz --all-match
pcre2_jit_on=1
pcre2_jit_on=1
pcre2_jit_on=1
[all-match]
(or
pattern_body<body>foo
(or
pattern_body<body>bar
pattern_body<body>baz
)
)
$ git grep --debug \( -e foo --and -e bar \) --or -e baz
pcre2_jit_on=1
pcre2_jit_on=1
pcre2_jit_on=1
(or
(and
patternfoo
patternbar
)
patternbaz
)
I.e. for each pattern we're considering for the and/or/--all-match
etc. debugging we'll now diligently spew out another identical line
saying whether the PCREv2 JIT is on or not.
I think that nobody's complained about that rather glaringly obviously
bad output says something about how much this is used, i.e. it's
not.
The need for this debugging aid for the composed grep/log patterns
seems to have passed, and the desire to dump the JIT config seems to
have been another one-off around the time we had JIT-related issues on
the PCREv2 codepath. That the original author of this debugging
facility seemingly hasn't noticed the bad output since then[2] is
probably some indicator.
1. https://lore.kernel.org/git/cover.1347615361.git.git@drmicha.warpmail.net/
2. https://lore.kernel.org/git/xmqqk1b8x0ac.fsf@gitster-ct.c.googlers.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Improve the support for invalid UTF-8 haystacks given a non-ASCII
needle when using the PCREv2 backend.
This is a more complete fix for a bug I started to fix in
870eea8166 (grep: do not enter PCRE2_UTF mode on fixed matching,
2019-07-26), now that PCREv2 has the PCRE2_MATCH_INVALID_UTF mode we
can make use of it.
This fixes the sort of case described in 8a5999838e (grep: stess test
PCRE v2 on invalid UTF-8 data, 2019-07-26), i.e.:
- The subject string is non-ASCII (e.g. "ævar")
- We're under a is_utf8_locale(), e.g. "en_US.UTF-8", not "C"
- We are using --ignore-case, or we're a non-fixed pattern
If those conditions were satisfied and we matched found non-valid
UTF-8 data PCREv2 might bark on it, in practice this only happened
under the JIT backend (turned on by default on most platforms).
Ultimately this fixes a "regression" in b65abcafc7 ("grep: use PCRE v2
for optimized fixed-string search", 2019-07-01), I'm putting that in
scare-quotes because before then we wouldn't properly support these
complex case-folding, locale etc. cases either, it just broke in
different ways.
There was a bug related to this the PCRE2_NO_START_OPTIMIZE flag fixed
in PCREv2 10.36. It can be worked around by setting the
PCRE2_NO_START_OPTIMIZE flag. Let's do that in those cases, and add
tests for the bug.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove support for using version 1 of the PCRE library. Its use has
been discouraged by upstream for a long time, and it's in a
bugfix-only state.
Anyone who was relying on v1 in particular got a nudge to move to v2
in e6c531b808 (Makefile: make USE_LIBPCRE=YesPlease mean v2, not v1,
2018-03-11), which was first released as part of v2.18.0.
With this the LIBPCRE2 test prerequisites is redundant to PCRE. But
I'm keeping it for self-documentation purposes, and to avoid conflict
with other in-flight PCRE patches.
I'm also not changing all of our own "pcre2" names to "pcre", i.e. the
inverse of 6d4b5747f0 (grep: change internal *pcre* variable &
function names to be *pcre1*, 2017-05-25). I don't see the point, and
it makes the history/blame harder to read. Maybe if there's ever a
PCRE v3...
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 15fabd1bbd ("builtin/grep.c: make configuration callback more
reusable", 2012-10-09), we learned to fill a `static struct grep_opt
grep_defaults` which we can use as a blueprint for other such structs.
At the time, we didn't consider designated initializers to be widely
useable, but these days, we do. (See, e.g., cbc0f81d96 ("strbuf: use
designated initializers in STRBUF_INIT", 2017-07-10).)
Use designated initializers to let the compiler set up the struct and so
that we don't need to remember to call `init_grep_defaults()`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`init_grep_defaults()` fills a `static struct grep_opt grep_defaults`.
This struct is then used by `grep_init()` as a blueprint for other such
structs. Notably, `grep_init()` takes a `struct repo *` and assigns it
into the target struct.
As a result, it is unnecessary for us to take a `struct repo *` in
`init_grep_defaults()` as well. We assign it into the default struct and
never look at it again. And in light of how we return early if we have
already set up the default struct, it's not just unnecessary, but is
also a bit confusing: If we are called twice and with different repos,
is it a bug or a feature that we ignore the second repo?
Drop the repo parameter for `init_grep_defaults()`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-grep uses 'grep_read_mutex' to protect its calls to object reading
operations. But these have their own internal lock now, which ensures a
better performance (allowing parallel access to more regions). So, let's
remove the former and, instead, activate the latter with
enable_obj_read_lock().
Sections that are currently protected by 'grep_read_mutex' but are not
internally protected by the object reading lock should be surrounded by
obj_read_lock() and obj_read_unlock(). These guarantee mutual exclusion
with object reading operations, keeping the current behavior and
avoiding race conditions. Namely, these places are:
In grep.c:
- fill_textconv() at fill_textconv_grep().
- userdiff_get_textconv() at grep_source_1().
In builtin/grep.c:
- parse_object_or_die() and the submodule functions at
grep_submodule().
- deref_tag() and gitmodules_config_oid() at grep_objects().
If these functions become thread-safe, in the future, we might remove
the locking and probably get some speedup.
Note that some of the submodule functions will already be thread-safe
(or close to being thread-safe) with the internal object reading lock.
However, as some of them will require additional modifications to be
removed from the critical section, this will be done in its own patch.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Leakfix.
* cb/pcre2-chartables-leakfix:
grep: avoid leak of chartables in PCRE2
grep: make PCRE2 aware of custom allocator
grep: make PCRE1 aware of custom allocator
|
|
94da9193a6 ("grep: add support for PCRE v2", 2017-06-01) introduced
a small memory leak visible with valgrind in t7813.
Complete the creation of a PCRE2 specific variable that was missing from
the original change and free the generated table just like it is done
for PCRE1.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
94da9193a6 (grep: add support for PCRE v2, 2017-06-01) didn't include
a way to override the system allocator, and so it is incompatible with
custom allocators (e.g. nedmalloc). This problem became obvious when we
tried to plug a memory leak by `free()`ing a data structure allocated by
PCRE2, triggering a segfault in Windows (where we use nedmalloc by
default).
PCRE2 requires the use of a general context to override the allocator
and therefore, there is a lot more code needed than in PCRE1, including
a couple of wrapper functions.
Extend the grep API with a "destructor" that could be called to cleanup
any objects that were created and used globally.
Update `builtin/grep.c` to use that new API, but any other future users
should make sure to have matching `grep_init()`/`grep_destroy()` calls
if they are using the pattern matching functionality.
Move some of the logic that was before done per thread (in the workers)
into an earlier phase to avoid degrading performance, but as the use of
PCRE2 with custom allocators is better understood it is expected more of
its functions will be instructed to use the custom allocator as well as
was done in the original code[1] this work was based on.
[1] https://public-inbox.org/git/3397e6797f872aedd18c6d795f4976e1c579514b.1565005867.git.gitgitgadget@gmail.com/
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
PCRE fixes.
* cb/pcre1-cleanup:
grep: refactor and simplify PCRE1 support
grep: make sure NO_LIBPCRE1_JIT disable JIT in PCRE1
|
|
A few simplification and bugfixes to PCRE interface.
* ab/pcre-jit-fixes:
grep: under --debug, show whether PCRE JIT is enabled
grep: do not enter PCRE2_UTF mode on fixed matching
grep: stess test PCRE v2 on invalid UTF-8 data
grep: create a "is_fixed" member in "grep_pat"
grep: consistently use "p->fixed" in compile_regexp()
grep: stop using a custom JIT stack with PCRE v1
grep: stop "using" a custom JIT stack with PCRE v2
grep: remove overly paranoid BUG(...) code
grep: use PCRE v2 for optimized fixed-string search
grep: remove the kwset optimization
grep: drop support for \0 in --fixed-strings <pattern>
grep: make the behavior for NUL-byte in patterns sane
grep tests: move binary pattern tests into their own file
grep tests: move "grep binary" alongside the rest
grep: inline the return value of a function call used only once
t4210: skip more command-line encoding tests on MinGW
grep: don't use PCRE2?_UTF8 with "log --encoding=<non-utf8>"
log tests: test regex backends in "--encode=<enc>" tests
|
|
18547aacf5 ("grep/pcre: support utf-8", 2016-06-25) that was released
with git 2.10 added the PCRE_UTF8 flag to PCRE1 matching including a
call to has_non_ascii() to try to avoid breakage if there was non-utf8
encoded content in the haystack.
Usually PCRE is compiled with JIT support (even if is not the default),
and therefore the codepath used includes calling pcre_jit_exec, which
skips UTF-8 validation by design (which might result in crashes or hangs)
but when JIT support wasn't compiled we use pcre_exec instead with the
posibility that grep might be aborted if invalid UTF-8 is found in the
haystack.
PCRE1 provides a flag since Mar 5, 2007 that could be used to skip the
checks explicitly so use that to make both codepaths equivalent (the
flag is ignored by pcre1_jit_exec)
this fix is only implemented for PCRE1 because PCRE2 is likely to have
a better solution (without the risks) instead in the future
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code used both a macro and a variable to keep track if JIT
support was desired and relied on the fact that a non JIT
enabled library will ignore a request for JIT compilation
(as defined by the second parameter of the call to pcre_study)
Cleanup the multiple levels of macros used and call pcre_study
with the right parameter after JIT support has been confirmed
and unless it was requested to be disabled with NO_LIBPCRE1_JIT
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
e87de7cab4 ("grep: un-break building with PCRE < 8.32", 2017-05-25)
added a restriction for JIT support that is no longer needed after
pcre_jit_exec() calls were removed.
Reorganize the definitions in grep.h so that JIT support could be
detected early and NO_LIBPCRE1_JIT could be used reliably to enforce
JIT doesn't get used.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This change paves the way for later using this value the regex compile
functions themselves.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Simplify the PCRE v1 code for the same reasons as for the PCRE v2 code
in the last commit. Unlike with v2 we actually used the custom stack
in v1, but let's use PCRE's built-in 32 KB one instead, since
experience with v2 shows that's enough. Most distros are already using
v2 as a default, and the underlying sljit code is the same.
Unfortunately we can't just pass a NULL to pcre_jit_exec() as with
pcre2_jit_match(). Unlike the v2 function it doesn't support
that. Instead we need to use the fatter pcre_exec() if we'd like the
same behavior.
This will make things slightly slower than on the fast-path function,
but it's OK since we care less about v1 performance these days since
we have and recommend v2. Running a similar performance test as what I
ran in fbaceaac47 ("grep: add support for the PCRE v1 JIT API",
2017-05-25) via:
GIT_PERF_REPEAT_COUNT=30 GIT_PERF_LARGE_REPO=~/g/linux GIT_PERF_MAKE_OPTS='-j8 USE_LIBPCRE1=Y CFLAGS=-O3 LIBPCREDIR=/home/avar/g/pcre/inst' ./run HEAD~ HEAD p7820-grep-engines.sh
Gives us this, just the /perl/ results:
Test HEAD~ HEAD
---------------------------------------------------------------------------------------
7820.3: perl grep 'how.to' 0.19(0.67+0.52) 0.19(0.65+0.52) +0.0%
7820.7: perl grep '^how to' 0.19(0.78+0.44) 0.19(0.72+0.49) +0.0%
7820.11: perl grep '[how] to' 0.39(2.13+0.43) 0.40(2.10+0.46) +2.6%
7820.15: perl grep '(e.t[^ ]*|v.ry) rare' 0.44(2.55+0.37) 0.45(2.47+0.41) +2.3%
7820.19: perl grep 'm(ú|u)lt.b(æ|y)te' 0.23(1.06+0.42) 0.22(1.03+0.43) -4.3%
It will also implicitly re-enable UTF-8 validation for PCRE v1. As
noted in [1] we now have cases as a result where PCRE v1 is more eager
to error out. Subsequent patches will fix that for v2, and I think
it's fair to tell v1 users "just upgrade" and not worry about that
edge case for v1.
1. https://public-inbox.org/git/CAPUEsphZJ_Uv9o1-yDpjNLA_q-f7gWXz9g1gCY2pYAYN8ri40g@mail.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As reported in [1] the code I added in 94da9193a6 ("grep: add support
for PCRE v2", 2017-06-01) to use a custom JIT stack has never
worked. It was incorrectly copy/pasted from code I added in
fbaceaac47 ("grep: add support for the PCRE v1 JIT API", 2017-05-25),
which did work.
Thus our intention of starting with 1 byte of stack at a maximum of 1
MB didn't happen, we'd always use the 32 KB stack provided by PCRE
v2's jit_machine_stack_exec()[2]. The reason I allocated a custom
stack at all was this advice in pcrejit(3) (same in pcre2jit(3)):
"By default, it uses 32KiB on the machine stack. However, some
large or complicated patterns need more than this"
Since we've haven't had any reports of users running into
PCRE2_ERROR_JIT_STACKLIMIT in the wild I think we can safely assume
that we can just use the library defaults instead and drop this
code. This won't change with the wider use of PCRE v2 in
ed0479ce3d ("Merge branch 'ab/no-kwset' into next", 2019-07-15), a
fixed string search is not a "large or complicated pattern".
For good measure I ran the performance test noted in 94da9193a6,
although the command is simpler now due to my 0f50c8e32c ("Makefile:
remove the NO_R_TO_GCC_LINKER flag", 2019-05-17):
GIT_PERF_REPEAT_COUNT=30 GIT_PERF_LARGE_REPO=~/g/linux GIT_PERF_MAKE_OPTS='-j8 USE_LIBPCRE2=Y CFLAGS=-O3 LIBPCREDIR=/home/avar/g/pcre2/inst' ./run HEAD~ HEAD p7820-grep-engines.sh
Just the /perl/ results are:
Test HEAD~ HEAD
---------------------------------------------------------------------------------------
7820.3: perl grep 'how.to' 0.17(0.27+0.65) 0.17(0.24+0.68) +0.0%
7820.7: perl grep '^how to' 0.16(0.23+0.66) 0.16(0.23+0.67) +0.0%
7820.11: perl grep '[how] to' 0.18(0.35+0.62) 0.18(0.33+0.65) +0.0%
7820.15: perl grep '(e.t[^ ]*|v.ry) rare' 0.17(0.45+0.54) 0.17(0.49+0.50) +0.0%
7820.19: perl grep 'm(ú|u)lt.b(æ|y)te' 0.16(0.33+0.58) 0.16(0.29+0.62) +0.0%
So, as expected there's no change, and running with valgrind reveals
that we have fewer allocations now.
As noted in [3] there are known regexes that will fail with the lower
stack limit, the way GNU grep fixed it is interesting, although I
believe the implementation is overly verbose, they could make PCRE v2
handle that gradual re-allocation, that's what min/max memory is
for.
So we might end up bringing this back, I'm more inclined to just kick
such cases upstairs to PCRE maintainers as a bug, perhaps they'll add
some overall "just allocate more then" flag to make this easier. In
any case there's no functional change here, we didn't have a custom
stack, so let's apply this first, we can always revert it later.
1. https://public-inbox.org/git/20190721194052.15440-1-carenas@gmail.com/
2. I didn't really intend to start with 1 byte, looking at the PCRE v2
code again what happened is that I cargo-culted some of PCRE v2's
own test code which was meant to test re-allocations. It's more
sane to start with say 32 KB with a max of 1 MB, as pcre2grep.c
does.
3. https://public-inbox.org/git/CAPUEspjj+fG8QDmf=bZXktfpLgkgiu34HTjKLhm-cmEE04FE-A@mail.gmail.com/
Reported-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A later change will replace this optimization with optimistic use of
PCRE v2. I'm completely removing it as an intermediate step, as
opposed to replacing it with PCRE v2, to demonstrate that no grep
semantics depend on this (or any other) optimization for the fixed
backend anymore.
For now this is mostly (but not entirely) a performance regression, as
shown by this hacky one-liner:
for opt in '' ' -i'
do
GIT_PERF_7821_GREP_OPTS=$opt GIT_PERF_REPEAT_COUNT=10 GIT_PERF_LARGE_REPO=~/g/linux GIT_PERF_MAKE_OPTS='-j8 CFLAGS=-O3 USE_LIBPCRE=YesPlease' ./run origin/master HEAD -- p7821-grep-engines-fixed.sh
done &&
for opt in '' ' -i'
do GIT_PERF_4221_LOG_OPTS=$opt GIT_PERF_REPEAT_COUNT=10 GIT_PERF_LARGE_REPO=~/g/linux GIT_PERF_MAKE_OPTS='-j8 CFLAGS=-O3 USE_LIBPCRE=YesPlease' ./run origin/master HEAD -- p4221-log-grep-engines-fixed.sh
done
Which produces:
plain grep:
Test origin/master HEAD
-------------------------------------------------------------------------
7821.1: fixed grep int 0.55(1.60+0.63) 0.82(3.11+0.51) +49.1%
7821.2: basic grep int 0.62(1.68+0.49) 0.85(3.02+0.52) +37.1%
7821.3: extended grep int 0.61(1.63+0.53) 0.91(3.09+0.44) +49.2%
7821.4: perl grep int 0.55(1.60+0.57) 0.41(0.93+0.57) -25.5%
7821.6: fixed grep uncommon 0.20(0.50+0.44) 0.35(1.27+0.42) +75.0%
7821.7: basic grep uncommon 0.20(0.49+0.45) 0.35(1.29+0.41) +75.0%
7821.8: extended grep uncommon 0.20(0.45+0.48) 0.35(1.25+0.44) +75.0%
7821.9: perl grep uncommon 0.20(0.53+0.41) 0.16(0.24+0.49) -20.0%
7821.11: fixed grep æ 0.35(1.27+0.40) 0.25(0.82+0.39) -28.6%
7821.12: basic grep æ 0.35(1.28+0.38) 0.25(0.75+0.44) -28.6%
7821.13: extended grep æ 0.36(1.21+0.46) 0.25(0.86+0.35) -30.6%
7821.14: perl grep æ 0.35(1.33+0.34) 0.16(0.26+0.47) -54.3%
grep with -i:
Test origin/master HEAD
-----------------------------------------------------------------------------
7821.1: fixed grep -i int 0.61(1.84+0.64) 1.11(4.12+0.64) +82.0%
7821.2: basic grep -i int 0.72(1.86+0.57) 1.15(4.48+0.49) +59.7%
7821.3: extended grep -i int 0.94(1.83+0.60) 1.53(4.12+0.58) +62.8%
7821.4: perl grep -i int 0.66(1.82+0.59) 0.55(1.08+0.58) -16.7%
7821.6: fixed grep -i uncommon 0.21(0.51+0.44) 0.44(1.74+0.34) +109.5%
7821.7: basic grep -i uncommon 0.21(0.55+0.41) 0.44(1.72+0.40) +109.5%
7821.8: extended grep -i uncommon 0.21(0.57+0.39) 0.42(1.64+0.45) +100.0%
7821.9: perl grep -i uncommon 0.21(0.48+0.48) 0.17(0.30+0.45) -19.0%
7821.11: fixed grep -i æ 0.25(0.73+0.45) 0.25(0.75+0.45) +0.0%
7821.12: basic grep -i æ 0.25(0.71+0.49) 0.26(0.77+0.44) +4.0%
7821.13: extended grep -i æ 0.25(0.75+0.44) 0.25(0.74+0.46) +0.0%
7821.14: perl grep -i æ 0.17(0.26+0.48) 0.16(0.20+0.52) -5.9%
plain log:
Test origin/master HEAD
---------------------------------------------------------------------------------
4221.1: fixed log --grep='int' 7.31(7.06+0.21) 8.11(7.85+0.20) +10.9%
4221.2: basic log --grep='int' 7.30(6.94+0.27) 8.16(7.89+0.19) +11.8%
4221.3: extended log --grep='int' 7.34(7.05+0.21) 8.08(7.76+0.25) +10.1%
4221.4: perl log --grep='int' 7.27(6.94+0.24) 7.05(6.76+0.25) -3.0%
4221.6: fixed log --grep='uncommon' 6.97(6.62+0.32) 7.86(7.51+0.30) +12.8%
4221.7: basic log --grep='uncommon' 7.05(6.69+0.29) 7.89(7.60+0.28) +11.9%
4221.8: extended log --grep='uncommon' 6.89(6.56+0.32) 7.99(7.66+0.24) +16.0%
4221.9: perl log --grep='uncommon' 7.02(6.66+0.33) 6.97(6.54+0.36) -0.7%
4221.11: fixed log --grep='æ' 7.37(7.03+0.33) 7.67(7.30+0.31) +4.1%
4221.12: basic log --grep='æ' 7.41(7.00+0.31) 7.60(7.28+0.26) +2.6%
4221.13: extended log --grep='æ' 7.35(6.96+0.38) 7.73(7.31+0.34) +5.2%
4221.14: perl log --grep='æ' 7.43(7.10+0.32) 6.95(6.61+0.27) -6.5%
log with -i:
Test origin/master HEAD
------------------------------------------------------------------------------------
4221.1: fixed log -i --grep='int' 7.40(7.05+0.23) 8.66(8.38+0.20) +17.0%
4221.2: basic log -i --grep='int' 7.39(7.09+0.23) 8.67(8.39+0.20) +17.3%
4221.3: extended log -i --grep='int' 7.29(6.99+0.26) 8.69(8.31+0.26) +19.2%
4221.4: perl log -i --grep='int' 7.42(7.16+0.21) 7.14(6.80+0.24) -3.8%
4221.6: fixed log -i --grep='uncommon' 6.94(6.58+0.35) 8.43(8.04+0.30) +21.5%
4221.7: basic log -i --grep='uncommon' 6.95(6.62+0.31) 8.34(7.93+0.32) +20.0%
4221.8: extended log -i --grep='uncommon' 7.06(6.75+0.25) 8.32(7.98+0.31) +17.8%
4221.9: perl log -i --grep='uncommon' 6.96(6.69+0.26) 7.04(6.64+0.32) +1.1%
4221.11: fixed log -i --grep='æ' 7.92(7.55+0.33) 7.86(7.44+0.34) -0.8%
4221.12: basic log -i --grep='æ' 7.88(7.49+0.32) 7.84(7.46+0.34) -0.5%
4221.13: extended log -i --grep='æ' 7.91(7.51+0.32) 7.87(7.48+0.32) -0.5%
4221.14: perl log -i --grep='æ' 7.01(6.59+0.35) 6.99(6.64+0.28) -0.3%
Some of those, as noted in [1] are because PCRE is faster at finding
fixed strings. This looks bad for some engines, but in the next change
we'll optimistically use PCRE v2 for all of these, so it'll look
better.
1. https://public-inbox.org/git/87v9x793qi.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a bug introduced in 18547aacf5 ("grep/pcre: support utf-8",
2016-06-25) that was missed due to a blindspot in our tests, as
discussed in the previous commit. I then blindly copied the same bug
in 94da9193a6 ("grep: add support for PCRE v2", 2017-06-01) when
adding the PCRE v2 code.
We should not tell PCRE that we're processing UTF-8 just because we're
dealing with non-ASCII. In the case of e.g. "log --encoding=<...>"
under is_utf8_locale() the haystack might be in ISO-8859-1, and the
needle might be in a non-UTF-8 encoding.
Maybe we should be more strict here and die earlier? Should we also be
converting the needle to the encoding in question, and failing if it's
not a string that's valid in that encoding? Maybe.
But for now matching this as non-UTF8 at least has some hope of
producing sensible results, since we know that our default heuristic
of assuming the text to be matched is in the user locale encoding
isn't true when we've explicitly encoded it to be in a different
encoding.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There has been a push to remove extern from function declarations.
Remove some instances of "extern" for function declarations which are
caught by Coccinelle. Note that Coccinelle has some difficulty with
processing functions with `__attribute__` or varargs so some `extern`
declarations are left behind to be dealt with in a future patch.
This was the Coccinelle patch used:
@@
type T;
identifier f;
@@
- extern
T f(...);
and it was run with:
$ git ls-files \*.{c,h} |
grep -v ^compat/ |
xargs spatch --sp-file contrib/coccinelle/noextern.cocci --in-place
Files under `compat/` are intentionally excluded as some are directly
copied from external sources and we should avoid churning them as much
as possible.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a faithful conversion without attempting to improve
anything. That comes later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
[jc: squashed in missing forward decl in userdiff.h found by Ramsay]
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git grep" learned the "--only-matching" option.
* tb/grep-only-matching:
grep.c: teach 'git grep --only-matching'
grep.c: extract show_line_header()
|
|
"git grep" learned the "--column" option that gives not just the
line number but the column number of the hit.
* tb/grep-column:
contrib/git-jump/git-jump: jump to exact location
grep.c: add configuration variables to show matched option
builtin/grep.c: add '--column' option to 'git-grep(1)'
grep.c: display column number of first match
grep.[ch]: extend grep_opt to allow showing matched column
grep.c: expose {,inverted} match column in match_line()
Documentation/config.txt: camel-case lineNumber for consistency
|
|
Teach 'git grep --only-matching', a new option to only print the
matching part(s) of a line.
For instance, a line containing the following (taken from README.md:27):
(`man gitcvs-migration` or `git help cvs-migration` if git is
Is printed as follows:
$ git grep --line-number --column --only-matching -e git -- \
README.md | grep ":27"
README.md:27:7:git
README.md:27:16:git
README.md:27:38:git
The patch works mostly as one would expect, with the exception of a few
considerations that are worth mentioning here.
Like GNU grep, this patch ignores --only-matching when --invert (-v) is
given. There is a sensible answer here, but parity with the behavior of
other tools is preferred.
Because a line might contain more than one match, there are special
considerations pertaining to when to print line headers, newlines, and
how to increment the match column offset. The line header and newlines
are handled as a special case within the main loop to avoid polluting
the surrounding code with conditionals that have large blocks.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To support showing the matched column when calling 'git-grep(1)', teach
'grep_opt' the normal set of options to configure the default behavior
and colorization of this feature.
Now that we have opt->columnnum, use it to disable short-circuiting over
ORs and ANDs so that col and icol are always filled with the earliest
matches on each line. In addition, don't return the first match from
match_line(), for the same reason.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is more inline with how we handle color slots in other code. It
also allows us to get the list of configurable color slots later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Building with NO_LIBPCRE1_JIT did not disable it, which has been fixed.
* ab/pcre-v2:
grep: fix NO_LIBPCRE1_JIT to fully disable JIT
|
|
If you have a pcre1 library which is compiled with JIT enabled then
PCRE_STUDY_JIT_COMPILE will be defined whether or not the
NO_LIBPCRE1_JIT configuration is set.
This means that we enable JIT functionality when calling pcre_study
even if NO_LIBPCRE1_JIT has been explicitly set and we just use plain
pcre_exec later.
Fix this by using own macro (GIT_PCRE_STUDY_JIT_COMPILE) which we set to
PCRE_STUDY_JIT_COMPILE only if NO_LIBPCRE1_JIT is not set and define to
0 otherwise, as before.
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Ævar Arnfjörð Bjarmason
René Scharfe
Junio C Hamano
Hamza Mahfooz
Matheus Tavares
Jeff King
Jonathan Tan
Martin Ågren
Carlo Marcelo Arenas Belón
Denton Liu
Nguyễn Thái Ngọc Duy
Taylor Blau
Charles Bailey