| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The support for deprecated PCRE1 library has been dropped.
* ab/retire-pcre1:
Remove support for v1 of the PCRE library
config.mak.uname: remove redundant NO_LIBPCRE1_JIT flag
|
|
Remove the hidden "grep --debug" and "log --grep-debug" options added
in 17bf35a3c7b (grep: teach --debug option to dump the parse tree,
2012-09-13).
At the time these options seem to have been intended to go along with
a documentation discussion and to help the author of relevant tests to
perform ad-hoc debugging on them[1].
Reasons to want this gone:
1. They were never documented, and the only (rather trivial) use of
them in our own codebase for testing is something I removed back
in e01b4dab01e (grep: change non-ASCII -i test to stop using
--debug, 2017-05-20).
2. Googling around doesn't show any in-the-wild uses I could dig up,
and on the Git ML the only mentions after the original discussion
seem to have been when they came up in unrelated diff contexts, or
that test commit of mine.
3. An exception to that is c581e4a7499 (grep: under --debug, show
whether PCRE JIT is enabled, 2019-08-18) where we added the
ability to dump out when PCREv2 has the JIT in effect.
The combination of that and my earlier b65abcafc7a (grep: use PCRE
v2 for optimized fixed-string search, 2019-07-01) means Git prints
this out in its most common in-the-wild configuration:
$ git log --grep-debug --grep=foo --grep=bar --grep=baz --all-match
pcre2_jit_on=1
pcre2_jit_on=1
pcre2_jit_on=1
[all-match]
(or
pattern_body<body>foo
(or
pattern_body<body>bar
pattern_body<body>baz
)
)
$ git grep --debug \( -e foo --and -e bar \) --or -e baz
pcre2_jit_on=1
pcre2_jit_on=1
pcre2_jit_on=1
(or
(and
patternfoo
patternbar
)
patternbaz
)
I.e. for each pattern we're considering for the and/or/--all-match
etc. debugging we'll now diligently spew out another identical line
saying whether the PCREv2 JIT is on or not.
I think that nobody's complained about that rather glaringly obviously
bad output says something about how much this is used, i.e. it's
not.
The need for this debugging aid for the composed grep/log patterns
seems to have passed, and the desire to dump the JIT config seems to
have been another one-off around the time we had JIT-related issues on
the PCREv2 codepath. That the original author of this debugging
facility seemingly hasn't noticed the bad output since then[2] is
probably some indicator.
1. https://lore.kernel.org/git/cover.1347615361.git.git@drmicha.warpmail.net/
2. https://lore.kernel.org/git/xmqqk1b8x0ac.fsf@gitster-ct.c.googlers.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove support for using version 1 of the PCRE library. Its use has
been discouraged by upstream for a long time, and it's in a
bugfix-only state.
Anyone who was relying on v1 in particular got a nudge to move to v2
in e6c531b808 (Makefile: make USE_LIBPCRE=YesPlease mean v2, not v1,
2018-03-11), which was first released as part of v2.18.0.
With this the LIBPCRE2 test prerequisites is redundant to PCRE. But
I'm keeping it for self-documentation purposes, and to avoid conflict
with other in-flight PCRE patches.
I'm also not changing all of our own "pcre2" names to "pcre", i.e. the
inverse of 6d4b5747f0 (grep: change internal *pcre* variable &
function names to be *pcre1*, 2017-05-25). I don't see the point, and
it makes the history/blame harder to read. Maybe if there's ever a
PCRE v3...
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 15fabd1bbd ("builtin/grep.c: make configuration callback more
reusable", 2012-10-09), we learned to fill a `static struct grep_opt
grep_defaults` which we can use as a blueprint for other such structs.
At the time, we didn't consider designated initializers to be widely
useable, but these days, we do. (See, e.g., cbc0f81d96 ("strbuf: use
designated initializers in STRBUF_INIT", 2017-07-10).)
Use designated initializers to let the compiler set up the struct and so
that we don't need to remember to call `init_grep_defaults()`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`init_grep_defaults()` fills a `static struct grep_opt grep_defaults`.
This struct is then used by `grep_init()` as a blueprint for other such
structs. Notably, `grep_init()` takes a `struct repo *` and assigns it
into the target struct.
As a result, it is unnecessary for us to take a `struct repo *` in
`init_grep_defaults()` as well. We assign it into the default struct and
never look at it again. And in light of how we return early if we have
already set up the default struct, it's not just unnecessary, but is
also a bit confusing: If we are called twice and with different repos,
is it a bug or a feature that we ignore the second repo?
Drop the repo parameter for `init_grep_defaults()`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-grep uses 'grep_read_mutex' to protect its calls to object reading
operations. But these have their own internal lock now, which ensures a
better performance (allowing parallel access to more regions). So, let's
remove the former and, instead, activate the latter with
enable_obj_read_lock().
Sections that are currently protected by 'grep_read_mutex' but are not
internally protected by the object reading lock should be surrounded by
obj_read_lock() and obj_read_unlock(). These guarantee mutual exclusion
with object reading operations, keeping the current behavior and
avoiding race conditions. Namely, these places are:
In grep.c:
- fill_textconv() at fill_textconv_grep().
- userdiff_get_textconv() at grep_source_1().
In builtin/grep.c:
- parse_object_or_die() and the submodule functions at
grep_submodule().
- deref_tag() and gitmodules_config_oid() at grep_objects().
If these functions become thread-safe, in the future, we might remove
the locking and probably get some speedup.
Note that some of the submodule functions will already be thread-safe
(or close to being thread-safe) with the internal object reading lock.
However, as some of them will require additional modifications to be
removed from the critical section, this will be done in its own patch.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Leakfix.
* cb/pcre2-chartables-leakfix:
grep: avoid leak of chartables in PCRE2
grep: make PCRE2 aware of custom allocator
grep: make PCRE1 aware of custom allocator
|
|
94da9193a6 ("grep: add support for PCRE v2", 2017-06-01) introduced
a small memory leak visible with valgrind in t7813.
Complete the creation of a PCRE2 specific variable that was missing from
the original change and free the generated table just like it is done
for PCRE1.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
94da9193a6 (grep: add support for PCRE v2, 2017-06-01) didn't include
a way to override the system allocator, and so it is incompatible with
custom allocators (e.g. nedmalloc). This problem became obvious when we
tried to plug a memory leak by `free()`ing a data structure allocated by
PCRE2, triggering a segfault in Windows (where we use nedmalloc by
default).
PCRE2 requires the use of a general context to override the allocator
and therefore, there is a lot more code needed than in PCRE1, including
a couple of wrapper functions.
Extend the grep API with a "destructor" that could be called to cleanup
any objects that were created and used globally.
Update `builtin/grep.c` to use that new API, but any other future users
should make sure to have matching `grep_init()`/`grep_destroy()` calls
if they are using the pattern matching functionality.
Move some of the logic that was before done per thread (in the workers)
into an earlier phase to avoid degrading performance, but as the use of
PCRE2 with custom allocators is better understood it is expected more of
its functions will be instructed to use the custom allocator as well as
was done in the original code[1] this work was based on.
[1] https://public-inbox.org/git/3397e6797f872aedd18c6d795f4976e1c579514b.1565005867.git.gitgitgadget@gmail.com/
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
PCRE fixes.
* cb/pcre1-cleanup:
grep: refactor and simplify PCRE1 support
grep: make sure NO_LIBPCRE1_JIT disable JIT in PCRE1
|
|
A few simplification and bugfixes to PCRE interface.
* ab/pcre-jit-fixes:
grep: under --debug, show whether PCRE JIT is enabled
grep: do not enter PCRE2_UTF mode on fixed matching
grep: stess test PCRE v2 on invalid UTF-8 data
grep: create a "is_fixed" member in "grep_pat"
grep: consistently use "p->fixed" in compile_regexp()
grep: stop using a custom JIT stack with PCRE v1
grep: stop "using" a custom JIT stack with PCRE v2
grep: remove overly paranoid BUG(...) code
grep: use PCRE v2 for optimized fixed-string search
grep: remove the kwset optimization
grep: drop support for \0 in --fixed-strings <pattern>
grep: make the behavior for NUL-byte in patterns sane
grep tests: move binary pattern tests into their own file
grep tests: move "grep binary" alongside the rest
grep: inline the return value of a function call used only once
t4210: skip more command-line encoding tests on MinGW
grep: don't use PCRE2?_UTF8 with "log --encoding=<non-utf8>"
log tests: test regex backends in "--encode=<enc>" tests
|
|
18547aacf5 ("grep/pcre: support utf-8", 2016-06-25) that was released
with git 2.10 added the PCRE_UTF8 flag to PCRE1 matching including a
call to has_non_ascii() to try to avoid breakage if there was non-utf8
encoded content in the haystack.
Usually PCRE is compiled with JIT support (even if is not the default),
and therefore the codepath used includes calling pcre_jit_exec, which
skips UTF-8 validation by design (which might result in crashes or hangs)
but when JIT support wasn't compiled we use pcre_exec instead with the
posibility that grep might be aborted if invalid UTF-8 is found in the
haystack.
PCRE1 provides a flag since Mar 5, 2007 that could be used to skip the
checks explicitly so use that to make both codepaths equivalent (the
flag is ignored by pcre1_jit_exec)
this fix is only implemented for PCRE1 because PCRE2 is likely to have
a better solution (without the risks) instead in the future
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code used both a macro and a variable to keep track if JIT
support was desired and relied on the fact that a non JIT
enabled library will ignore a request for JIT compilation
(as defined by the second parameter of the call to pcre_study)
Cleanup the multiple levels of macros used and call pcre_study
with the right parameter after JIT support has been confirmed
and unless it was requested to be disabled with NO_LIBPCRE1_JIT
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
e87de7cab4 ("grep: un-break building with PCRE < 8.32", 2017-05-25)
added a restriction for JIT support that is no longer needed after
pcre_jit_exec() calls were removed.
Reorganize the definitions in grep.h so that JIT support could be
detected early and NO_LIBPCRE1_JIT could be used reliably to enforce
JIT doesn't get used.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This change paves the way for later using this value the regex compile
functions themselves.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Simplify the PCRE v1 code for the same reasons as for the PCRE v2 code
in the last commit. Unlike with v2 we actually used the custom stack
in v1, but let's use PCRE's built-in 32 KB one instead, since
experience with v2 shows that's enough. Most distros are already using
v2 as a default, and the underlying sljit code is the same.
Unfortunately we can't just pass a NULL to pcre_jit_exec() as with
pcre2_jit_match(). Unlike the v2 function it doesn't support
that. Instead we need to use the fatter pcre_exec() if we'd like the
same behavior.
This will make things slightly slower than on the fast-path function,
but it's OK since we care less about v1 performance these days since
we have and recommend v2. Running a similar performance test as what I
ran in fbaceaac47 ("grep: add support for the PCRE v1 JIT API",
2017-05-25) via:
GIT_PERF_REPEAT_COUNT=30 GIT_PERF_LARGE_REPO=~/g/linux GIT_PERF_MAKE_OPTS='-j8 USE_LIBPCRE1=Y CFLAGS=-O3 LIBPCREDIR=/home/avar/g/pcre/inst' ./run HEAD~ HEAD p7820-grep-engines.sh
Gives us this, just the /perl/ results:
Test HEAD~ HEAD
---------------------------------------------------------------------------------------
7820.3: perl grep 'how.to' 0.19(0.67+0.52) 0.19(0.65+0.52) +0.0%
7820.7: perl grep '^how to' 0.19(0.78+0.44) 0.19(0.72+0.49) +0.0%
7820.11: perl grep '[how] to' 0.39(2.13+0.43) 0.40(2.10+0.46) +2.6%
7820.15: perl grep '(e.t[^ ]*|v.ry) rare' 0.44(2.55+0.37) 0.45(2.47+0.41) +2.3%
7820.19: perl grep 'm(ú|u)lt.b(æ|y)te' 0.23(1.06+0.42) 0.22(1.03+0.43) -4.3%
It will also implicitly re-enable UTF-8 validation for PCRE v1. As
noted in [1] we now have cases as a result where PCRE v1 is more eager
to error out. Subsequent patches will fix that for v2, and I think
it's fair to tell v1 users "just upgrade" and not worry about that
edge case for v1.
1. https://public-inbox.org/git/CAPUEsphZJ_Uv9o1-yDpjNLA_q-f7gWXz9g1gCY2pYAYN8ri40g@mail.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As reported in [1] the code I added in 94da9193a6 ("grep: add support
for PCRE v2", 2017-06-01) to use a custom JIT stack has never
worked. It was incorrectly copy/pasted from code I added in
fbaceaac47 ("grep: add support for the PCRE v1 JIT API", 2017-05-25),
which did work.
Thus our intention of starting with 1 byte of stack at a maximum of 1
MB didn't happen, we'd always use the 32 KB stack provided by PCRE
v2's jit_machine_stack_exec()[2]. The reason I allocated a custom
stack at all was this advice in pcrejit(3) (same in pcre2jit(3)):
"By default, it uses 32KiB on the machine stack. However, some
large or complicated patterns need more than this"
Since we've haven't had any reports of users running into
PCRE2_ERROR_JIT_STACKLIMIT in the wild I think we can safely assume
that we can just use the library defaults instead and drop this
code. This won't change with the wider use of PCRE v2 in
ed0479ce3d ("Merge branch 'ab/no-kwset' into next", 2019-07-15), a
fixed string search is not a "large or complicated pattern".
For good measure I ran the performance test noted in 94da9193a6,
although the command is simpler now due to my 0f50c8e32c ("Makefile:
remove the NO_R_TO_GCC_LINKER flag", 2019-05-17):
GIT_PERF_REPEAT_COUNT=30 GIT_PERF_LARGE_REPO=~/g/linux GIT_PERF_MAKE_OPTS='-j8 USE_LIBPCRE2=Y CFLAGS=-O3 LIBPCREDIR=/home/avar/g/pcre2/inst' ./run HEAD~ HEAD p7820-grep-engines.sh
Just the /perl/ results are:
Test HEAD~ HEAD
---------------------------------------------------------------------------------------
7820.3: perl grep 'how.to' 0.17(0.27+0.65) 0.17(0.24+0.68) +0.0%
7820.7: perl grep '^how to' 0.16(0.23+0.66) 0.16(0.23+0.67) +0.0%
7820.11: perl grep '[how] to' 0.18(0.35+0.62) 0.18(0.33+0.65) +0.0%
7820.15: perl grep '(e.t[^ ]*|v.ry) rare' 0.17(0.45+0.54) 0.17(0.49+0.50) +0.0%
7820.19: perl grep 'm(ú|u)lt.b(æ|y)te' 0.16(0.33+0.58) 0.16(0.29+0.62) +0.0%
So, as expected there's no change, and running with valgrind reveals
that we have fewer allocations now.
As noted in [3] there are known regexes that will fail with the lower
stack limit, the way GNU grep fixed it is interesting, although I
believe the implementation is overly verbose, they could make PCRE v2
handle that gradual re-allocation, that's what min/max memory is
for.
So we might end up bringing this back, I'm more inclined to just kick
such cases upstairs to PCRE maintainers as a bug, perhaps they'll add
some overall "just allocate more then" flag to make this easier. In
any case there's no functional change here, we didn't have a custom
stack, so let's apply this first, we can always revert it later.
1. https://public-inbox.org/git/20190721194052.15440-1-carenas@gmail.com/
2. I didn't really intend to start with 1 byte, looking at the PCRE v2
code again what happened is that I cargo-culted some of PCRE v2's
own test code which was meant to test re-allocations. It's more
sane to start with say 32 KB with a max of 1 MB, as pcre2grep.c
does.
3. https://public-inbox.org/git/CAPUEspjj+fG8QDmf=bZXktfpLgkgiu34HTjKLhm-cmEE04FE-A@mail.gmail.com/
Reported-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A later change will replace this optimization with optimistic use of
PCRE v2. I'm completely removing it as an intermediate step, as
opposed to replacing it with PCRE v2, to demonstrate that no grep
semantics depend on this (or any other) optimization for the fixed
backend anymore.
For now this is mostly (but not entirely) a performance regression, as
shown by this hacky one-liner:
for opt in '' ' -i'
do
GIT_PERF_7821_GREP_OPTS=$opt GIT_PERF_REPEAT_COUNT=10 GIT_PERF_LARGE_REPO=~/g/linux GIT_PERF_MAKE_OPTS='-j8 CFLAGS=-O3 USE_LIBPCRE=YesPlease' ./run origin/master HEAD -- p7821-grep-engines-fixed.sh
done &&
for opt in '' ' -i'
do GIT_PERF_4221_LOG_OPTS=$opt GIT_PERF_REPEAT_COUNT=10 GIT_PERF_LARGE_REPO=~/g/linux GIT_PERF_MAKE_OPTS='-j8 CFLAGS=-O3 USE_LIBPCRE=YesPlease' ./run origin/master HEAD -- p4221-log-grep-engines-fixed.sh
done
Which produces:
plain grep:
Test origin/master HEAD
-------------------------------------------------------------------------
7821.1: fixed grep int 0.55(1.60+0.63) 0.82(3.11+0.51) +49.1%
7821.2: basic grep int 0.62(1.68+0.49) 0.85(3.02+0.52) +37.1%
7821.3: extended grep int 0.61(1.63+0.53) 0.91(3.09+0.44) +49.2%
7821.4: perl grep int 0.55(1.60+0.57) 0.41(0.93+0.57) -25.5%
7821.6: fixed grep uncommon 0.20(0.50+0.44) 0.35(1.27+0.42) +75.0%
7821.7: basic grep uncommon 0.20(0.49+0.45) 0.35(1.29+0.41) +75.0%
7821.8: extended grep uncommon 0.20(0.45+0.48) 0.35(1.25+0.44) +75.0%
7821.9: perl grep uncommon 0.20(0.53+0.41) 0.16(0.24+0.49) -20.0%
7821.11: fixed grep æ 0.35(1.27+0.40) 0.25(0.82+0.39) -28.6%
7821.12: basic grep æ 0.35(1.28+0.38) 0.25(0.75+0.44) -28.6%
7821.13: extended grep æ 0.36(1.21+0.46) 0.25(0.86+0.35) -30.6%
7821.14: perl grep æ 0.35(1.33+0.34) 0.16(0.26+0.47) -54.3%
grep with -i:
Test origin/master HEAD
-----------------------------------------------------------------------------
7821.1: fixed grep -i int 0.61(1.84+0.64) 1.11(4.12+0.64) +82.0%
7821.2: basic grep -i int 0.72(1.86+0.57) 1.15(4.48+0.49) +59.7%
7821.3: extended grep -i int 0.94(1.83+0.60) 1.53(4.12+0.58) +62.8%
7821.4: perl grep -i int 0.66(1.82+0.59) 0.55(1.08+0.58) -16.7%
7821.6: fixed grep -i uncommon 0.21(0.51+0.44) 0.44(1.74+0.34) +109.5%
7821.7: basic grep -i uncommon 0.21(0.55+0.41) 0.44(1.72+0.40) +109.5%
7821.8: extended grep -i uncommon 0.21(0.57+0.39) 0.42(1.64+0.45) +100.0%
7821.9: perl grep -i uncommon 0.21(0.48+0.48) 0.17(0.30+0.45) -19.0%
7821.11: fixed grep -i æ 0.25(0.73+0.45) 0.25(0.75+0.45) +0.0%
7821.12: basic grep -i æ 0.25(0.71+0.49) 0.26(0.77+0.44) +4.0%
7821.13: extended grep -i æ 0.25(0.75+0.44) 0.25(0.74+0.46) +0.0%
7821.14: perl grep -i æ 0.17(0.26+0.48) 0.16(0.20+0.52) -5.9%
plain log:
Test origin/master HEAD
---------------------------------------------------------------------------------
4221.1: fixed log --grep='int' 7.31(7.06+0.21) 8.11(7.85+0.20) +10.9%
4221.2: basic log --grep='int' 7.30(6.94+0.27) 8.16(7.89+0.19) +11.8%
4221.3: extended log --grep='int' 7.34(7.05+0.21) 8.08(7.76+0.25) +10.1%
4221.4: perl log --grep='int' 7.27(6.94+0.24) 7.05(6.76+0.25) -3.0%
4221.6: fixed log --grep='uncommon' 6.97(6.62+0.32) 7.86(7.51+0.30) +12.8%
4221.7: basic log --grep='uncommon' 7.05(6.69+0.29) 7.89(7.60+0.28) +11.9%
4221.8: extended log --grep='uncommon' 6.89(6.56+0.32) 7.99(7.66+0.24) +16.0%
4221.9: perl log --grep='uncommon' 7.02(6.66+0.33) 6.97(6.54+0.36) -0.7%
4221.11: fixed log --grep='æ' 7.37(7.03+0.33) 7.67(7.30+0.31) +4.1%
4221.12: basic log --grep='æ' 7.41(7.00+0.31) 7.60(7.28+0.26) +2.6%
4221.13: extended log --grep='æ' 7.35(6.96+0.38) 7.73(7.31+0.34) +5.2%
4221.14: perl log --grep='æ' 7.43(7.10+0.32) 6.95(6.61+0.27) -6.5%
log with -i:
Test origin/master HEAD
------------------------------------------------------------------------------------
4221.1: fixed log -i --grep='int' 7.40(7.05+0.23) 8.66(8.38+0.20) +17.0%
4221.2: basic log -i --grep='int' 7.39(7.09+0.23) 8.67(8.39+0.20) +17.3%
4221.3: extended log -i --grep='int' 7.29(6.99+0.26) 8.69(8.31+0.26) +19.2%
4221.4: perl log -i --grep='int' 7.42(7.16+0.21) 7.14(6.80+0.24) -3.8%
4221.6: fixed log -i --grep='uncommon' 6.94(6.58+0.35) 8.43(8.04+0.30) +21.5%
4221.7: basic log -i --grep='uncommon' 6.95(6.62+0.31) 8.34(7.93+0.32) +20.0%
4221.8: extended log -i --grep='uncommon' 7.06(6.75+0.25) 8.32(7.98+0.31) +17.8%
4221.9: perl log -i --grep='uncommon' 6.96(6.69+0.26) 7.04(6.64+0.32) +1.1%
4221.11: fixed log -i --grep='æ' 7.92(7.55+0.33) 7.86(7.44+0.34) -0.8%
4221.12: basic log -i --grep='æ' 7.88(7.49+0.32) 7.84(7.46+0.34) -0.5%
4221.13: extended log -i --grep='æ' 7.91(7.51+0.32) 7.87(7.48+0.32) -0.5%
4221.14: perl log -i --grep='æ' 7.01(6.59+0.35) 6.99(6.64+0.28) -0.3%
Some of those, as noted in [1] are because PCRE is faster at finding
fixed strings. This looks bad for some engines, but in the next change
we'll optimistically use PCRE v2 for all of these, so it'll look
better.
1. https://public-inbox.org/git/87v9x793qi.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a bug introduced in 18547aacf5 ("grep/pcre: support utf-8",
2016-06-25) that was missed due to a blindspot in our tests, as
discussed in the previous commit. I then blindly copied the same bug
in 94da9193a6 ("grep: add support for PCRE v2", 2017-06-01) when
adding the PCRE v2 code.
We should not tell PCRE that we're processing UTF-8 just because we're
dealing with non-ASCII. In the case of e.g. "log --encoding=<...>"
under is_utf8_locale() the haystack might be in ISO-8859-1, and the
needle might be in a non-UTF-8 encoding.
Maybe we should be more strict here and die earlier? Should we also be
converting the needle to the encoding in question, and failing if it's
not a string that's valid in that encoding? Maybe.
But for now matching this as non-UTF8 at least has some hope of
producing sensible results, since we know that our default heuristic
of assuming the text to be matched is in the user locale encoding
isn't true when we've explicitly encoded it to be in a different
encoding.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There has been a push to remove extern from function declarations.
Remove some instances of "extern" for function declarations which are
caught by Coccinelle. Note that Coccinelle has some difficulty with
processing functions with `__attribute__` or varargs so some `extern`
declarations are left behind to be dealt with in a future patch.
This was the Coccinelle patch used:
@@
type T;
identifier f;
@@
- extern
T f(...);
and it was run with:
$ git ls-files \*.{c,h} |
grep -v ^compat/ |
xargs spatch --sp-file contrib/coccinelle/noextern.cocci --in-place
Files under `compat/` are intentionally excluded as some are directly
copied from external sources and we should avoid churning them as much
as possible.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a faithful conversion without attempting to improve
anything. That comes later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
[jc: squashed in missing forward decl in userdiff.h found by Ramsay]
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git grep" learned the "--only-matching" option.
* tb/grep-only-matching:
grep.c: teach 'git grep --only-matching'
grep.c: extract show_line_header()
|
|
"git grep" learned the "--column" option that gives not just the
line number but the column number of the hit.
* tb/grep-column:
contrib/git-jump/git-jump: jump to exact location
grep.c: add configuration variables to show matched option
builtin/grep.c: add '--column' option to 'git-grep(1)'
grep.c: display column number of first match
grep.[ch]: extend grep_opt to allow showing matched column
grep.c: expose {,inverted} match column in match_line()
Documentation/config.txt: camel-case lineNumber for consistency
|
|
Teach 'git grep --only-matching', a new option to only print the
matching part(s) of a line.
For instance, a line containing the following (taken from README.md:27):
(`man gitcvs-migration` or `git help cvs-migration` if git is
Is printed as follows:
$ git grep --line-number --column --only-matching -e git -- \
README.md | grep ":27"
README.md:27:7:git
README.md:27:16:git
README.md:27:38:git
The patch works mostly as one would expect, with the exception of a few
considerations that are worth mentioning here.
Like GNU grep, this patch ignores --only-matching when --invert (-v) is
given. There is a sensible answer here, but parity with the behavior of
other tools is preferred.
Because a line might contain more than one match, there are special
considerations pertaining to when to print line headers, newlines, and
how to increment the match column offset. The line header and newlines
are handled as a special case within the main loop to avoid polluting
the surrounding code with conditionals that have large blocks.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To support showing the matched column when calling 'git-grep(1)', teach
'grep_opt' the normal set of options to configure the default behavior
and colorization of this feature.
Now that we have opt->columnnum, use it to disable short-circuiting over
ORs and ANDs so that col and icol are always filled with the earliest
matches on each line. In addition, don't return the first match from
match_line(), for the same reason.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is more inline with how we handle color slots in other code. It
also allows us to get the list of configurable color slots later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Building with NO_LIBPCRE1_JIT did not disable it, which has been fixed.
* ab/pcre-v2:
grep: fix NO_LIBPCRE1_JIT to fully disable JIT
|
|
If you have a pcre1 library which is compiled with JIT enabled then
PCRE_STUDY_JIT_COMPILE will be defined whether or not the
NO_LIBPCRE1_JIT configuration is set.
This means that we enable JIT functionality when calling pcre_study
even if NO_LIBPCRE1_JIT has been explicitly set and we just use plain
pcre_exec later.
Fix this by using own macro (GIT_PCRE_STUDY_JIT_COMPILE) which we set to
PCRE_STUDY_JIT_COMPILE only if NO_LIBPCRE1_JIT is not set and define to
0 otherwise, as before.
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert grep to use 'struct repository' which enables recursing into
submodules to be handled in-process.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor calls to the grep machinery to always pass opt.ignore_case &
opt.extended_regexp_option instead of setting the equivalent regflags
bits.
The bug fixed when making -i work with -P in commit 9e3cbc59d5 ("log:
make --regexp-ignore-case work with --perl-regexp", 2017-05-20) was
really just plastering over the code smell which this change fixes.
The reason for adding the extensive commentary here is that I
discovered some subtle complexity in implementing this that really
should be called out explicitly to future readers.
Before this change we'd rely on the difference between
`extended_regexp_option` and `regflags` to serve as a membrane between
our preliminary parsing of grep.extendedRegexp and grep.patternType,
and what we decided to do internally.
Now that those two are the same thing, it's necessary to unset
`extended_regexp_option` just before we commit in cases where both of
those config variables are set. See 84befcd0a4 ("grep: add a
grep.patternType configuration setting", 2012-08-03) for the code and
documentation related to that.
The explanation of why the if/else branches in
grep_commit_pattern_type() are ordered the way they are exists in that
commit message, but I think it's worth calling this subtlety out
explicitly with a comment for future readers.
Even though grep_commit_pattern_type() is the only caller of
grep_set_pattern_type_option() it's simpler to reset the
extended_regexp_option flag in the latter, since 2/3 branches in the
former would otherwise need to reset it, this way we can do it in one
place.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Conversion from uchar[20] to struct object_id continues.
* bw/object-id: (33 commits)
diff: rename diff_fill_sha1_info to diff_fill_oid_info
diffcore-rename: use is_empty_blob_oid
tree-diff: convert path_appendnew to object_id
tree-diff: convert diff_tree_paths to struct object_id
tree-diff: convert try_to_follow_renames to struct object_id
builtin/diff-tree: cleanup references to sha1
diff-tree: convert diff_tree_sha1 to struct object_id
notes-merge: convert write_note_to_worktree to struct object_id
notes-merge: convert verify_notes_filepair to struct object_id
notes-merge: convert find_notes_merge_pair_ps to struct object_id
notes-merge: convert merge_from_diffs to struct object_id
notes-merge: convert notes_merge* to struct object_id
tree-diff: convert diff_root_tree_sha1 to struct object_id
combine-diff: convert find_paths_* to struct object_id
combine-diff: convert diff_tree_combined to struct object_id
diff: convert diff_flush_patch_id to struct object_id
patch-ids: convert to struct object_id
diff: finish conversion for prepare_temp_file to struct object_id
diff: convert reuse_worktree_file to struct object_id
diff: convert fill_filespec to struct object_id
...
|
|
Convert the remaining parts of grep to use struct object_id.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add support for v2 of the PCRE API. This is a new major version of
PCRE that came out in early 2015[1].
The regular expression syntax is the same, but while the API is
similar, pretty much every function is either renamed or takes
different arguments. Thus using it via entirely new functions makes
sense, as opposed to trying to e.g. have one compile_pcre_pattern()
that would call either PCRE v1 or v2 functions.
Git can now be compiled with either USE_LIBPCRE1=YesPlease or
USE_LIBPCRE2=YesPlease, with USE_LIBPCRE=YesPlease currently being a
synonym for the former. Providing both is a compile-time error.
With earlier patches to enable JIT for PCRE v1 the performance of the
release versions of both libraries is almost exactly the same, with
PCRE v2 being around 1% slower.
However after I reported this to the pcre-dev mailing list[2] I got a
lot of help with the API use from Zoltán Herczeg, he subsequently
optimized some of the JIT functionality in v2 of the library.
Running the p7820-grep-engines.sh performance test against the latest
Subversion trunk of both, with both them and git compiled as -O3, and
the test run against linux.git, gives the following results. Just the
/perl/ tests shown:
$ GIT_PERF_REPEAT_COUNT=30 GIT_PERF_LARGE_REPO=~/g/linux GIT_PERF_MAKE_COMMAND='grep -q LIBPCRE2 Makefile && make -j8 USE_LIBPCRE2=YesPlease CC=~/perl5/installed/bin/gcc NO_R_TO_GCC_LINKER=YesPlease CFLAGS=-O3 LIBPCREDIR=/home/avar/g/pcre2/inst LDFLAGS=-Wl,-rpath,/home/avar/g/pcre2/inst/lib || make -j8 USE_LIBPCRE=YesPlease CC=~/perl5/installed/bin/gcc NO_R_TO_GCC_LINKER=YesPlease CFLAGS=-O3 LIBPCREDIR=/home/avar/g/pcre/inst LDFLAGS=-Wl,-rpath,/home/avar/g/pcre/inst/lib' ./run HEAD~5 HEAD~ HEAD p7820-grep-engines.sh
[...]
Test HEAD~5 HEAD~ HEAD
-----------------------------------------------------------------------------------------------------------------
7820.3: perl grep 'how.to' 0.31(1.10+0.48) 0.21(0.35+0.56) -32.3% 0.21(0.34+0.55) -32.3%
7820.7: perl grep '^how to' 0.56(2.70+0.40) 0.24(0.64+0.52) -57.1% 0.20(0.28+0.60) -64.3%
7820.11: perl grep '[how] to' 0.56(2.66+0.38) 0.29(0.95+0.45) -48.2% 0.23(0.45+0.54) -58.9%
7820.15: perl grep '(e.t[^ ]*|v.ry) rare' 1.02(5.77+0.42) 0.31(1.02+0.54) -69.6% 0.23(0.50+0.54) -77.5%
7820.19: perl grep 'm(ú|u)lt.b(æ|y)te' 0.38(1.57+0.42) 0.27(0.85+0.46) -28.9% 0.21(0.33+0.57) -44.7%
See commit ("perf: add a comparison test of grep regex engines",
2017-04-19) for details on the machine the above test run was executed
on.
Here HEAD~2 is git with PCRE v1 without JIT, HEAD~ is PCRE v1 with
JIT, and HEAD is PCRE v2 (also with JIT). See previous commits of mine
mentioning p7820-grep-engines.sh for more details on the test setup.
For ease of readability, a different run just of HEAD~ (PCRE v1 with
JIT v.s. PCRE v2), again with just the /perl/ tests shown:
[...]
Test HEAD~ HEAD
----------------------------------------------------------------------------------------
7820.3: perl grep 'how.to' 0.21(0.42+0.52) 0.21(0.31+0.58) +0.0%
7820.7: perl grep '^how to' 0.25(0.65+0.50) 0.20(0.31+0.57) -20.0%
7820.11: perl grep '[how] to' 0.30(0.90+0.50) 0.23(0.46+0.53) -23.3%
7820.15: perl grep '(e.t[^ ]*|v.ry) rare' 0.30(1.19+0.38) 0.23(0.51+0.51) -23.3%
7820.19: perl grep 'm(ú|u)lt.b(æ|y)te' 0.27(0.84+0.48) 0.21(0.34+0.57) -22.2%
I.e. the two are either neck-to-neck, but PCRE v2 usually pulls ahead,
when it does it's around 20% faster.
A brief note on thread safety: As noted in pcre2api(3) & pcre2jit(3)
the compiled pattern can be shared between threads, but not some of
the JIT context, however the grep threading support does all pattern &
JIT compilation in separate threads, so this code doesn't need to
concern itself with thread safety.
See commit 63e7e9d8b6 ("git-grep: Learn PCRE", 2011-05-09) for the
initial addition of PCRE v1. This change follows some of the same
patterns it did (and which were discussed on list at the time),
e.g. mocking up types with typedef instead of ifdef-ing them out when
USE_LIBPCRE2 isn't defined. This adds some trivial memory use to the
program, but makes the code look nicer.
1. https://lists.exim.org/lurker/message/20150105.162835.0666407a.en.html
2. https://lists.exim.org/lurker/thread/20170419.172322.833ee099.en.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Amend my change earlier in this series ("grep: add support for the
PCRE v1 JIT API", 2017-04-11) to un-break the build on PCRE v1
versions later than 8.31 compiled without --enable-jit.
As explained in that change and a later compatibility change in this
series ("grep: un-break building with PCRE < 8.32", 2017-05-10) the
pcre_jit_exec() function is a faster path to execute the JIT.
Unfortunately there's no compatibility stub for that function compiled
into the library if pcre_config(PCRE_CONFIG_JIT, &ret) would return 0,
and no macro that can be used to check for it, so the only portable
option to support builds without --enable-jit is via a new
NO_LIBPCRE1_JIT=UnfortunatelyYes Makefile option[1].
Another option would be to make the JIT opt-in via
USE_LIBPCRE1_JIT=YesPlease, after all it's not a default option of
PCRE v1.
I think it makes more sense to make it opt-out since even though it's
not a default option, most packagers of PCRE seem to turn it on by
default, with the notable exception of the MinGW package.
Make the MinGW platform work by default by changing the build defaults
to turn on NO_LIBPCRE1_JIT=UnfortunatelyYes. It is the only platform
that turns on USE_LIBPCRE=YesPlease by default, see commit
df5218b4c3 ("config.mak.uname: support MSys2", 2016-01-13) for that
change.
1. "How do I support pcre1 JIT on all
versions?" (https://lists.exim.org/lurker/thread/20170601.103148.10253788.en.html)
2. https://github.com/Alexpux/MINGW-packages/blob/master/mingw-w64-pcre/PKGBUILD
(referenced from "Re: PCRE v2 compile error, was Re: What's cooking
in git.git (May 2017, #01; Mon, 1)";
<alpine.DEB.2.20.1705021756530.3480@virtualbox>)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Amend my change earlier in this series ("grep: add support for the
PCRE v1 JIT API", 2017-04-11) to un-break the build on PCRE v1
versions earlier than 8.20.
The 8.20 release was the first release to have JIT & pcre_jit_stack in
the headers, so a mock type needs to be provided for it on those
releases.
Now git should compile with all PCRE versions that it supported before
my JIT change.
I've tested it as far back as version 7.5 released on 2008-01-10, once
I got down to version 7.0 it wouldn't build anymore with GCC 7.1.1,
and I couldn't be bothered to anything older than 7.5 as I'm confident
that if the build breaks on those older versions it's not because of
my JIT change.
See the "un-break" change in this series ("grep: un-break building
with PCRE < 8.32", 2017-05-10) for why this isn't squashed into the
main PCRE JIT commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Amend my change earlier in this series ("grep: add support for the
PCRE v1 JIT API", 2017-04-11) to un-break the build on PCRE v1
versions earlier than 8.32.
The JIT support was added in version 8.20 released on 2011-10-21, but
it wasn't until 8.32 released on 2012-11-30 that the fast code path to
use the JIT via pcre_jit_exec() was added[1] (see also [2]).
This means that versions 8.20 through 8.31 could still use the JIT,
but supporting it on those versions would add to the already verbose
macro soup around JIT support it, and I don't expect that the use-case
of compiling a brand new git against a 5 year old PCRE is particularly
common, and if someone does that they can just get the existing
pre-JIT slow codepath.
So just take the easy way out and disable the JIT on any version older
than 8.32.
The reason this change isn't part of the initial change PCRE JIT
support is to have a cleaner history showing which parts of the
implementation are only used for ancient PCRE versions. This also
makes it easier to revert this change if we ever decide to stop
supporting those old versions.
1. http://www.pcre.org/original/changelog.txt ("28. Introducing a
native interface for JIT. Through this interface, the
compiled[...]")
2. https://bugs.exim.org/show_bug.cgi?id=2121
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the grep PCRE v1 code to use JIT when available. When PCRE
support was initially added in commit 63e7e9d8b6 ("git-grep: Learn
PCRE", 2011-05-09) PCRE had no JIT support, it was integrated into
8.20 released on 2011-10-21.
Enabling JIT support usually improves performance by more than
40%. The pattern compilation times are relatively slower, but those
relative numbers are tiny, and are easily made back in all but the
most trivial cases of grep. Detailed benchmarks & overview of
compilation times is at: http://sljit.sourceforge.net/pcre.html
With this change the difference in a t/perf/p7820-grep-engines.sh run
is, with just the /perl/ tests shown:
$ GIT_PERF_REPEAT_COUNT=30 GIT_PERF_LARGE_REPO=~/g/linux GIT_PERF_MAKE_OPTS='-j8 USE_LIBPCRE=YesPlease CC=~/perl5/installed/bin/gcc NO_R_TO_GCC_LINKER=YesPlease CFLAGS=-O3 LIBPCREDIR=/home/avar/g/pcre/inst LDFLAGS=-Wl,-rpath,/home/avar/g/pcre/inst/lib' ./run HEAD~ HEAD p7820-grep-engines.sh
Test HEAD~ HEAD
---------------------------------------------------------------------------------------
7820.3: perl grep 'how.to' 0.35(1.11+0.43) 0.23(0.42+0.46) -34.3%
7820.7: perl grep '^how to' 0.64(2.71+0.36) 0.27(0.66+0.44) -57.8%
7820.11: perl grep '[how] to' 0.63(2.51+0.42) 0.33(0.98+0.39) -47.6%
7820.15: perl grep '(e.t[^ ]*|v.ry) rare' 1.17(5.61+0.35) 0.34(1.08+0.46) -70.9%
7820.19: perl grep 'm(ú|u)lt.b(æ|y)te' 0.43(1.52+0.44) 0.30(0.88+0.42) -30.2%
The conditional support for JIT is implemented as suggested in the
pcrejit(3) man page. E.g. defining PCRE_STUDY_JIT_COMPILE to 0 if it's
not present.
The implementation is relatively verbose because even if
PCRE_CONFIG_JIT is defined only a call to pcre_config() can determine
if the JIT is available, and if so the faster pcre_jit_exec() function
should be called instead of pcre_exec(), and a different (but not
complimentary!) function needs to be called to free pcre1_extra_info.
There's no graceful fallback if pcre_jit_stack_alloc() fails under
PCRE_CONFIG_JIT, instead the program will simply abort. I don't think
this is worth handling gracefully, it'll only fail in cases where
malloc() doesn't work, in which case we're screwed anyway.
That there's no assignment of `p->pcre1_jit_on = 0` when
PCRE_CONFIG_JIT isn't defined isn't a bug. The create_grep_pat()
function allocates the grep_pat allocates it with calloc(), so it's
guaranteed to be 0 when PCRE_CONFIG_JIT isn't defined.
I you're bisecting and find this change, check that your PCRE isn't
older than 8.32. This change intentionally broke really old versions
of PCRE, but that's fixed in follow-up commits.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the internal PCRE variable & function names to have a "1"
suffix. This is for preparation for libpcre2 support, where having
non-versioned names would be confusing.
An earlier change in this series ("grep: change the internal PCRE
macro names to be PCRE1", 2017-04-07) elaborates on the motivations
behind this change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the internal USE_LIBPCRE define, & build options flag to use a
naming convention ending in PCRE1, without changing the long-standing
USE_LIBPCRE Makefile flag which enables this code.
This is for preparation for libpcre2 support where having things like
USE_LIBPCRE and USE_LIBPCRE2 in any more places than we absolutely
need to for backwards compatibility with old Makefile arguments would
be confusing.
In some ways it would be better to change everything that now uses
USE_LIBPCRE to use USE_LIBPCRE1, and to make specifying
USE_LIBPCRE (or --with-pcre) an error. This would impose a one-time
burden on packagers of git to s/USE_LIBPCRE/USE_LIBPCRE1/ in their
build scripts.
However I'd like to leave the door open to making
USE_LIBPCRE=YesPlease eventually mean USE_LIBPCRE2=YesPlease,
i.e. once PCRE v2 is ubiquitous enough that it makes sense to make it
the default.
This code and the USE_LIBPCRE Makefile argument was added in commit
63e7e9d8b6 ("git-grep: Learn PCRE", 2011-05-09). At the time there was
no indication that the PCRE project would release an entirely new &
incompatible API around 3 years later.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add `GREP_SOURCE_SUBMODULE` as a grep_source type and cases for this new
type in the various switch statements in grep.c.
When initializing a grep_source with type `GREP_SOURCE_SUBMODULE` the
identifier can either be NULL (to indicate that the working tree will be
used) or a SHA1 (the REV of the submodule to be grep'd). If the
identifier is a SHA1 then we want to fall through to the
`GREP_SOURCE_SHA1` case to handle the copying of the SHA1.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git -c grep.patternType=extended log --basic-regexp" misbehaved
because the internal API to access the grep machinery was not
designed well.
* jc/grep-commandline-vs-configuration:
grep: further simplify setting the pattern type
|
|
When c5c31d33 (grep: move pattern-type bits support to top-level
grep.[ch], 2012-10-03) introduced grep_commit_pattern_type() helper
function, the intention was to allow the users of grep API to having
to fiddle only with .pattern_type_option (which can be set to "fixed",
"basic", "extended", and "pcre"), and then immediately before compiling
the pattern strings for use, call grep_commit_pattern_type() to have
it prepare various bits in the grep_opt structure (like .fixed,
.regflags, etc.).
However, grep_set_pattern_type_option() helper function the grep API
internally uses were left as an external function by mistake. This
function shouldn't have been made callable by the users of the API.
Later when the grep API was used in revision traversal machinery,
the caller then mistakenly started calling the function around
34a4ae55 (log --grep: use the same helper to set -E/-F options as
"git grep", 2012-10-03), instead of setting the .pattern_type_option
field and letting the grep_commit_pattern_type() to take care of the
details.
This caused an unnecessary bug that made a configured
grep.patternType take precedence over the command line options
(e.g. --basic-regexp, --fixed-strings) in "git log" family of
commands.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The default tables are usually built with C locale and only suitable
for LANG=C or similar. This should make case insensitive search work
correctly for all single-byte charsets.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The config option color.grep.match can be used to specify the highlighting
color for matching strings. Add the options matchContext and matchSelected
to allow different colors to be specified for matching strings in the
context vs. in selected lines. This is similar to the ms and mc specifiers
in GNU grep's environment variable GREP_COLORS.
Tests are from Zoltan Klinger's earlier attempt to solve the same
issue in a different way.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recently and not so recently, we made sure that log/grep type operations
use textconv filters when a userfacing diff would do the same:
ef90ab6 (pickaxe: use textconv for -S counting, 2012-10-28)
b1c2f57 (diff_grep: use textconv buffers for add/deleted files, 2012-10-28)
0508fe5 (combine-diff: respect textconv attributes, 2011-05-23)
"git grep" currently does not use textconv filters at all, that is
neither for displaying the match and context nor for the actual grepping,
even when requested by --textconv.
Introduce an option "--textconv" which makes git grep use any configured
textconv filters for grepping and output purposes. It is off by default.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Create a GREP_HEADER_FIELD_MIN so we can check that the field value is
sane and silence the clang warning.
Clang warning happens because the enum is unsigned (this is
implementation-defined, and there is no negative fields) and the check
is then tautological.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: John Keeping <john@keeping.me.uk>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git grep -e pattern <tree>" asked the attribute system to read
"<tree>:.gitattributes" file in the working tree, which was
nonsense.
* nd/grep-true-path:
grep: stop looking at random places for .gitattributes
|
|
grep searches for .gitattributes using "name" field in struct
grep_source but that field is not real on-disk path name. For example,
"grep pattern rev" fills the field with "rev:path", and Git looks for
.gitattributes in the (non-existent but exploitable) path "rev:path"
instead of "path".
This patch passes real paths down to grep_source_load_driver() when:
- grep on work tree
- grep on the index
- grep a commit (or a tag if it points to a commit)
so that these cases look up .gitattributes at proper paths.
.gitattributes lookup is disabled in all other cases.
Initial-work-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Ævar Arnfjörð Bjarmason
Martin Ågren
Matheus Tavares
Carlo Marcelo Arenas Belón
Denton Liu
Nguyễn Thái Ngọc Duy
Taylor Blau
Charles Bailey
Brandon Williams
René Scharfe
Jeff King
Antoine Pelisse