summaryrefslogtreecommitdiff
path: root/grep.c
AgeCommit message (Collapse)AuthorFilesLines
2009-07-02grep: simplify -p outputLibravatar René Scharfe1-8/+4
It was found a bit too loud to show == separators between the function headers. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-01grep -p: support user defined regular expressionsLibravatar René Scharfe1-3/+26
Respect the userdiff attributes and config settings when looking for lines with function definitions in git grep -p. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-01grep: add option -p/--show-functionLibravatar René Scharfe1-8/+53
The new option -p instructs git grep to print the previous function definition as a context line, similar to diff -p. Such context lines are marked with an equal sign instead of a dash. This option complements the existing context options -A, -B, -C. Function definitions are detected using the same heuristic that diff uses. User defined regular expressions are not supported, yet. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-01grep: handle pre context lines on demandLibravatar René Scharfe1-29/+32
Factor out pre context line handling into the new function show_pre_context() and change the algorithm to rewind by looking for newline characters and roll forward again, instead of maintaining an array of line beginnings and ends. This is slower for hits, but the cost for non-matching lines becomes zero. Normally, there are far more non-matching lines, so the time spent in total decreases. Before this patch (current Linux kernel repo, best of five runs): $ time git grep --no-ext-grep -B1 memset >/dev/null real 0m2.134s user 0m1.932s sys 0m0.196s $ time git grep --no-ext-grep -B1000 memset >/dev/null real 0m12.059s user 0m11.837s sys 0m0.224s The same with this patch: $ time git grep --no-ext-grep -B1 memset >/dev/null real 0m2.117s user 0m1.892s sys 0m0.228s $ time git grep --no-ext-grep -B1000 memset >/dev/null real 0m2.986s user 0m2.696s sys 0m0.288s Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-01grep: print context hunk marks between filesLibravatar René Scharfe1-1/+6
Print a hunk mark before matches from a new file are shown, in addition to the current behaviour of printing them if lines have been skipped. The result is easier to read, as (presumably unrelated) matches from different files are separated by a hunk mark. GNU grep does the same. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-01grep: move context hunk mark handling into show_line()Libravatar René Scharfe1-15/+11
Move last_shown into struct grep_opt, to make it available in show_line(), and then make the function handle the printing of hunk marks for context lines in a central place. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-03grep: fix empty word-regexp matchesLibravatar René Scharfe1-1/+5
The command "git grep -w ''" dies as soon as it encounters an empty line, reporting (wrongly) that "regexp returned nonsense". The first hunk of this patch relaxes the sanity check that is responsible for that, allowing matches to start at the end. The second hunk complements it by making sure that empty matches are rejected if -w was specified, as they are not really words. GNU grep does the same: $ echo foo | grep -c '' 1 $ echo foo | grep -c -w '' 0 Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-01grep: fix colouring of matches with zero lengthLibravatar René Scharfe1-0/+2
If a zero-length match is encountered, break out of loop and show the rest of the line uncoloured. Otherwise we'd be looping forever, trying to make progress by advancing the pointer by zero characters. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-23grep: fix word-regexp at the beginning of linesLibravatar René Scharfe1-0/+1
After bol is forwarded, it doesn't represent the beginning of the line any more. This means that the beginning-of-line marker (^) mustn't match, i.e. the regex flag REG_NOTBOL needs to be set. This bug was introduced by fb62eb7fab97cea880ea7fe4f341a4dfad14ab48 ("grep -w: forward to next possible position after rejected match"). Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-20grep: fix word-regexp colouringLibravatar René Scharfe1-0/+5
As noticed by Dmitry Gryazin: When a pattern is found but it doesn't start and end at word boundaries, bol is forwarded to after the match and the pattern is searched again. When a pattern is finally found between word boundaries, the match offsets are off by the number of characters that have been skipped. This patch corrects the offsets to be relative to the value of bol as passed to match_one_pattern() by its caller. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-28Merge branch 'maint'Libravatar Junio C Hamano1-2/+6
* maint: grep: fix segfault when "git grep '('" is given Documentation: fix a grammatical error in api-builtin.txt builtin-merge: fix a typo in an error message
2009-04-28Merge branch 'maint-1.6.1' into maintLibravatar Junio C Hamano1-2/+6
* maint-1.6.1: grep: fix segfault when "git grep '('" is given Documentation: fix a grammatical error in api-builtin.txt builtin-merge: fix a typo in an error message
2009-04-28Merge branch 'maint-1.6.0' into maint-1.6.1Libravatar Junio C Hamano1-2/+6
* maint-1.6.0: grep: fix segfault when "git grep '('" is given Documentation: fix a grammatical error in api-builtin.txt builtin-merge: fix a typo in an error message
2009-04-27grep: fix segfault when "git grep '('" is givenLibravatar Linus Torvalds1-2/+6
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-18git log: avoid segfault with --all-matchLibravatar Michele Ballabio1-1/+2
Avoid a segfault when the command git log --all-match was issued, by ignoring the option. Signed-off-by: Michele Ballabio <barra_cuda@katamail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-08grep: cast printf %.*s "precision" argument explicitly to intLibravatar Junio C Hamano1-2/+2
On some systems, regoff_t that is the type of rm_so/rm_eo members are wider than int; %.*s precision specifier expects an int, so use an explicit cast. A breakage reported on Darwin by Brian Gernhardt should be fixed with this patch. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-07grep: color patterns in outputLibravatar René Scharfe1-12/+78
Coloring matches makes them easier to spot in the output. Add two options and two parameters: color.grep (to turn coloring on or off), color.grep.match (to set the color of matches), --color and --no-color (to turn coloring on or off, respectively). The output of external greps is not changed. This patch is based on earlier ones by Nguyễn Thái Ngọc Duy and Thiago Alves. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-07grep: add pmatch and eflags arguments to match_one_pattern()Libravatar René Scharfe1-11/+10
Push pmatch and eflags to the callers of match_one_pattern(), which allows them to specify regex execution flags and to get the location of a match. Since we only use the first element of the matches array and aren't interested in submatches, no provision is made for callers to provide a larger array. eflags are ignored for fixed patterns, but that's OK, since they only have a meaning in connection with regular expressions containing ^ or $. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-07grep: remove grep_opt argument from match_expr_eval()Libravatar René Scharfe1-17/+17
The only use of the struct grep_opt argument of match_expr_eval() is to pass the option word_regexp to match_one_pattern(). By adding a pattern flag for it we can reduce the number of function arguments of these two functions, as a cleanup and preparation for adding more in the next patch. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-07grep: micro-optimize hit collection for AND nodesLibravatar René Scharfe1-7/+3
In addition to returning if an expression matches a line, match_expr_eval() updates the expression's hit flag if the parameter collect_hits is set. It never sets collect_hits for children of AND nodes, though, so their hit flag will never be updated. Because of that we can return early if the first child didn't match, no matter if collect_hits is set or not. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-17Add is_regex_special()Libravatar René Scharfe1-8/+1
Add is_regex_special(), a character class macro for chars that have a special meaning in regular expressions. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-17Change NUL char handling of isspecial()Libravatar René Scharfe1-2/+3
Replace isspecial() by the new macro is_glob_special(), which is more, well, specialized. The former included the NUL char in its character class, while the letter only included characters that are special to file name globbing. The new name contains underscores because they enhance readability considerably now that it's made up of three words. Renaming the function is necessary to document its changed scope. The call sites of isspecial() are updated to check explicitly for NUL. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-09grep: don't call regexec() for fixed stringsLibravatar René Scharfe1-4/+25
Add the new flag "fixed" to struct grep_pat and set it if the pattern is doesn't contain any regex control characters in addition to if the flag -F/--fixed-strings was specified. This gives a nice speed up on msysgit, where regexec() seems to be extra slow. Before (best of five runs): $ time git grep grep v1.6.1 >/dev/null real 0m0.552s user 0m0.000s sys 0m0.000s $ time git grep -F grep v1.6.1 >/dev/null real 0m0.170s user 0m0.000s sys 0m0.015s With the patch: $ time git grep grep v1.6.1 >/dev/null real 0m0.173s user 0m0.000s sys 0m0.000s The difference is much smaller on Linux, but still measurable. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-09grep -w: forward to next possible position after rejected matchLibravatar René Scharfe1-4/+7
grep -w accepts matches between non-word characters, only. If a match from regexec() doesn't meet this criteria, grep continues its search after the first character of that match. We can be a bit smarter here and skip all positions that follow a word character first, as they can't match our criteria. This way we can consume characters quite cheaply and don't need to special-case the handling of the beginning of a line. Here's a contrived example command on msysgit (best of five runs): $ time git grep -w ...... v1.6.1 >/dev/null real 0m1.611s user 0m0.000s sys 0m0.015s With the patch it's quite a bit faster: $ time git grep -w ...... v1.6.1 >/dev/null real 0m1.179s user 0m0.000s sys 0m0.015s More common search patterns will gain a lot less, but it's a nice clean up anyway. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-05remove trailing LF in die() messagesLibravatar Alexander Potashev1-1/+1
LF at the end of format strings given to die() is redundant because die already adds one on its own. Signed-off-by: Alexander Potashev <aspotashev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-11Merge branch 'maint'Libravatar Junio C Hamano1-3/+3
* maint: Fix non-literal format in printf-style calls git-submodule: Avoid printing a spurious message. git ls-remote: make usage string match manpage Makefile: help people who run 'make check' by mistake
2008-11-11Fix non-literal format in printf-style callsLibravatar Daniel Lowe1-3/+3
These were found using gcc 4.3.2-1ubuntu11 with the warning: warning: format not a string literal and no format arguments Incorporated suggestions from Brandon Casey <casey@nrlssc.navy.mil>. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-10-01git grep: Add "-z/--null" option as in GNU's grep.Libravatar Raphael Zimmerer1-3/+11
Here's a trivial patch that adds "-z" and "--null" options to "git grep". It was discussed on the mailing-list that git's "-z" convention should be used instead of GNU grep's "-Z". So things like 'git grep -l -z "$FOO" | xargs -0 sed -i "s/$FOO/$BOO/"' do work now. Signed-off-by: Raphael Zimmerer <killekulla@rdrz.de> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-09-04log --author/--committer: really match only with name partLibravatar Junio C Hamano1-0/+52
When we tried to find commits done by AUTHOR, the first implementation tried to pattern match a line with "^author .*AUTHOR", which later was enhanced to strip leading caret and look for "^author AUTHOR" when the search pattern was anchored at the left end (i.e. --author="^AUTHOR"). This had a few problems: * When looking for fixed strings (e.g. "git log -F --author=x --grep=y"), the regexp internally used "^author .*x" would never match anything; * To match at the end (e.g. "git log --author='google.com>$'"), the generated regexp has to also match the trailing timestamp part the commit header lines have. Also, in order to determine if the '$' at the end means "match at the end of the line" or just a literal dollar sign (probably backslash-quoted), we would need to parse the regexp ourselves. An earlier alternative tried to make sure that a line matches "^author " (to limit by field name) and the user supplied pattern at the same time. While it solved the -F problem by introducing a special override for matching the "^author ", it did not solve the trailing timestamp nor tail match problem. It also would have matched every commit if --author=author was asked for, not because the author's email part had this string, but because every commit header line that talks about the author begins with that field name, regardleses of who wrote it. Instead of piling more hacks on top of hacks, this rethinks the grep machinery that is used to look for strings in the commit header, and makes sure that (1) field name matches literally at the beginning of the line, followed by a SP, and (2) the user supplied pattern is matched against the remainder of the line, excluding the trailing timestamp data. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-04Move buffer_is_binary() to xdiff-interface.hLibravatar Johannes Schindelin1-11/+1
We already have two instances where we want to determine if a buffer contains binary data as opposed to text. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2006-12-20simplify inclusion of system header files.Libravatar Junio C Hamano1-1/+0
This is a mechanical clean-up of the way *.c files include system header files. (1) sources under compat/, platform sha-1 implementations, and xdelta code are exempt from the following rules; (2) the first #include must be "git-compat-util.h" or one of our own header file that includes it first (e.g. config.h, builtin.h, pkt-line.h); (3) system headers that are included in "git-compat-util.h" need not be included in individual C source files. (4) "git-compat-util.h" does not have to include subsystem specific header files (e.g. expat.h). Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-27grep --all-matchLibravatar Junio C Hamano1-18/+96
This lets you say: git grep --all-match -e A -e B -e C to find lines that match A or B or C but limit the matches from the files that have all of A, B and C. This is different from git grep -e A --and -e B --and -e C in that the latter looks for a single line that has all of these at the same time. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-27grep: fix --fixed-strings combined with expression.Libravatar Junio C Hamano1-5/+2
"git grep --fixed-strings -e GIT --and -e VERSION .gitignore" misbehaved because we did not notice this needs to grab lines that have the given two fixed strings at the same time. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-27grep: free expressions and patterns when done.Libravatar Junio C Hamano1-0/+42
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-20Update grep internal for grepping only in head/bodyLibravatar Junio C Hamano1-16/+35
This further updates the built-in grep engine so that we can say something like "this pattern should match only in head". This can be used to simplify grepping in the log messages. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-20builtin-grep: make pieces of it available as library.Libravatar Junio C Hamano1-0/+440
This makes three functions and associated option structures from builtin-grep available from other parts of the system. * options to drive built-in grep engine is stored in struct grep_opt; * pattern strings and extended grep expressions are added to struct grep_opt with append_grep_pattern(); * when finished calling append_grep_pattern(), call compile_grep_patterns() to prepare for execution; * call grep_buffer() to find matches in the in-core buffer. This also adds an internal option "status_only" to grep_opt, which suppresses any output from grep_buffer(). Callers of the function as library can use it to check if there is a match without producing any output. Signed-off-by: Junio C Hamano <junkio@cox.net>