summaryrefslogtreecommitdiff
path: root/gpg-interface.c
AgeCommit message (Collapse)AuthorFilesLines
2018-07-18gpg-interface: introduce new signature format "x509" using gpgsmLibravatar Henning Schild1-0/+15
This commit allows git to create and check x509 type signatures using gpgsm. Signed-off-by: Henning Schild <henning.schild@siemens.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-18gpg-interface: introduce new config to select per gpg format programLibravatar Henning Schild1-1/+1
Supporting multiple signing formats we will have the need to configure a custom program each. Add a new config value to cater for that. Signed-off-by: Henning Schild <henning.schild@siemens.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-18gpg-interface: do not hardcode the key string len anymoreLibravatar Henning Schild1-3/+4
gnupg does print the keyid followed by a space and the signer comes next. The same pattern is also used in gpgsm, but there the key length would be 40 instead of 16. Instead of hardcoding the expected length, find the first space and calculate it. Input that does not match the expected format will be ignored now, before we jumped to found+17 which might have been behind the end of an unexpected string. Signed-off-by: Henning Schild <henning.schild@siemens.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-18gpg-interface: introduce an abstraction for multiple gpg formatsLibravatar Henning Schild1-21/+67
Create a struct that holds the format details for the supported formats. At the moment that is still just "openpgp". This commit prepares for the introduction of more formats, that might use other programs and match other signatures. Signed-off-by: Henning Schild <henning.schild@siemens.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-17gpg-interface: add new config to select how to sign a commitLibravatar Henning Schild1-0/+10
Add "gpg.format" where the user can specify which type of signature to use for commits. At the moment only "openpgp" is supported and the value is not even used. This commit prepares for a new types of signatures. Signed-off-by: Henning Schild <henning.schild@siemens.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-11gpg-interface: make parse_gpg_output static and remove from interface headerLibravatar Henning Schild1-1/+1
Turn parse_gpg_output into a static function, the only outside user was migrated in an earlier commit. Signed-off-by: Henning Schild <henning.schild@siemens.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-16gpg-interface: find the last gpg signature lineLibravatar Jeff King1-3/+9
A signed tag has a detached signature like this: object ... [...more header...] This is the tag body. -----BEGIN PGP SIGNATURE----- [opaque gpg data] -----END PGP SIGNATURE----- Our parser finds the _first_ line that appears to start a PGP signature block, meaning we may be confused by a signature (or a signature-like line) in the actual body. Let's keep parsing and always find the final block, which should be the detached signature over all of the preceding content. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Ben Toews <mastahyeti@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-16gpg-interface: extract gpg line matching helperLibravatar Jeff King1-2/+7
Let's separate the actual line-by-line parsing of signatures from the notion of "is this a gpg signature line". That will make it easier to do more refactoring of this loop in future patches. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Ben Toews <mastahyeti@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-16gpg-interface: fix const-correctness of "eol" pointerLibravatar Jeff King1-2/+1
We accidentally shed the "const" of our buffer by passing it through memchr. Let's fix that, and while we're at it, move our variable declaration inside the loop, which is the only place that uses it. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Ben Toews <mastahyeti@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-16gpg-interface: use size_t for signature buffer sizeLibravatar Jeff King1-1/+1
Even though our object sizes (from which these buffers would come) are typically "unsigned long", this is something we'd like to eventually fix (since it's only 32-bits even on 64-bit Windows). It makes more sense to use size_t when taking an in-memory buffer. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Ben Toews <mastahyeti@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-16gpg-interface: modernize function declarationsLibravatar Jeff King1-17/+0
Let's drop "extern" from our declarations, which brings us in line with our modern style guidelines. While we're here, let's wrap some of the overly long lines, and move docstrings for public functions to their declarations, since they document the interface. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Ben Toews <mastahyeti@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-16gpg-interface: handle bool user.signingkeyLibravatar Jeff King1-0/+6
The config handler for user.signingkey does not check for a boolean value, and thus: git -c user.signingkey tag will segfault. We could fix this and even shorten the code by using git_config_string(). But our set_signing_key() helper is used by other code outside of gpg-interface.c, so we must keep it (and we may as well use it, because unlike git_config_string() it does not leak when we overwrite an old value). Ironically, the handler for gpg.program just below _could_ use git_config_string() but doesn't. But since we're going to touch that in a future patch, we'll leave it alone for now. We will add some whitespace and returns in preparation for adding more config keys, though. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Ben Toews <mastahyeti@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-06tempfile: auto-allocate tempfiles on heapLibravatar Jeff King1-8/+8
The previous commit taught the tempfile code to give up ownership over tempfiles that have been renamed or deleted. That makes it possible to use a stack variable like this: struct tempfile t; create_tempfile(&t, ...); ... if (!err) rename_tempfile(&t, ...); else delete_tempfile(&t); But doing it this way has a high potential for creating memory errors. The tempfile we pass to create_tempfile() ends up on a global linked list, and it's not safe for it to go out of scope until we've called one of those two deactivation functions. Imagine that we add an early return from the function that forgets to call delete_tempfile(). With a static or heap tempfile variable, the worst case is that the tempfile hangs around until the program exits (and some functions like setup_shallow_temporary rely on this intentionally, creating a tempfile and then leaving it for later cleanup). But with a stack variable as above, this is a serious memory error: the variable goes out of scope and may be filled with garbage by the time the tempfile code looks at it. Let's see if we can make it harder to get this wrong. Since many callers need to allocate arbitrary numbers of tempfiles, we can't rely on static storage as a general solution. So we need to turn to the heap. We could just ask all callers to pass us a heap variable, but that puts the burden on them to call free() at the right time. Instead, let's have the tempfile code handle the heap allocation _and_ the deallocation (when the tempfile is deactivated and removed from the list). This changes the return value of all of the creation functions. For the cleanup functions (delete and rename), we'll add one extra bit of safety: instead of taking a tempfile pointer, we'll take a pointer-to-pointer and set it to NULL after freeing the object. This makes it safe to double-call functions like delete_tempfile(), as the second call treats the NULL input as a noop. Several callsites follow this pattern. The resulting patch does have a fair bit of noise, as each caller needs to be converted to handle: 1. Storing a pointer instead of the struct itself. 2. Passing the pointer instead of taking the struct address. 3. Handling a "struct tempfile *" return instead of a file descriptor. We could play games to make this less noisy. For example, by defining the tempfile like this: struct tempfile { struct heap_allocated_part_of_tempfile { int fd; ...etc } *actual_data; } Callers would continue to have a "struct tempfile", and it would be "active" only when the inner pointer was non-NULL. But that just makes things more awkward in the long run. There aren't that many callers, so we can simply bite the bullet and adjust all of them. And the compiler makes it easy for us to find them all. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-06tempfile: do not delete tempfile on failed closeLibravatar Jeff King1-1/+1
When close_tempfile() fails, we delete the tempfile and reset the fields of the tempfile struct. This makes it easier for callers to return without cleaning up, but it also makes this common pattern: if (close_tempfile(tempfile)) return error_errno("error closing %s", tempfile->filename.buf); wrong, because the "filename" field has been reset after the failed close. And it's not easy to fix, as in many cases we don't have another copy of the filename (e.g., if it was created via one of the mks_tempfile functions, and we just have the original template string). Let's drop the feature that a failed close automatically deletes the file. This puts the burden on the caller to do the deletion themselves, but this isn't that big a deal. Callers which do: if (write(...) || close_tempfile(...)) { delete_tempfile(...); return -1; } already had to call delete when the write() failed, and so aren't affected. Likewise, any caller which just calls die() in the error path is OK; we'll delete the tempfile during the atexit handler. Because this patch changes the semantics of close_tempfile() without changing its signature, all callers need to be manually checked and converted to the new scheme. This patch covers all in-tree callers, but there may be others for not-yet-merged topics. To catch these, we rename the function to close_tempfile_gently(), which will attract compile-time attention to new callers. (Technically the original could be considered "gentle" already in that it didn't die() on errors, but this one is even more so). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-06always check return value of close_tempfileLibravatar Jeff King1-2/+2
If close_tempfile() encounters an error, then it deletes the tempfile and resets the "struct tempfile". But many code paths ignore the return value and continue to use the tempfile. Instead, we should generally treat this the same as a write() error. Note that in the postimage of some of these cases our error message will be bogus after a failed close because we look at tempfile->filename (either directly or via get_tempfile_path). But after the failed close resets the tempfile object, this is guaranteed to be the empty string. That will be addressed in a future patch (because there are many more cases of the same problem than just these instances). Note also in the hunk in gpg-interface.c that it's fine to call delete_tempfile() in the error path, even if close_tempfile() failed and already deleted the file. The tempfile code is smart enough to know the second deletion is a noop. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-06verify_signed_buffer: prefer close_tempfile() to close()Libravatar Jeff King1-1/+1
We do a manual close() on the descriptor provided to us by mks_tempfile. But this runs contrary to the advice in tempfile.h, which notes that you should always use close_tempfile(). Otherwise the descriptor may be reused without the tempfile object knowing it, and the later call to delete_tempfile() could close a random descriptor. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-24Merge branch 'ab/free-and-null'Libravatar Junio C Hamano1-10/+5
A common pattern to free a piece of memory and assign NULL to the pointer that used to point at it has been replaced with a new FREE_AND_NULL() macro. * ab/free-and-null: *.[ch] refactoring: make use of the FREE_AND_NULL() macro coccinelle: make use of the "expression" FREE_AND_NULL() rule coccinelle: add a rule to make "expression" code use FREE_AND_NULL() coccinelle: make use of the "type" FREE_AND_NULL() rule coccinelle: add a rule to make "type" code use FREE_AND_NULL() git-compat-util: add a FREE_AND_NULL() wrapper around free(ptr); ptr = NULL
2017-06-16*.[ch] refactoring: make use of the FREE_AND_NULL() macroLibravatar Ævar Arnfjörð Bjarmason1-10/+5
Replace occurrences of `free(ptr); ptr = NULL` which weren't caught by the coccinelle rule. These fall into two categories: - free/NULL assignments one after the other which coccinelle all put on one line, which is functionally equivalent code, but very ugly. - manually spotted occurrences where the NULL assignment isn't right after the free() call. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-15config: don't include config.h by defaultLibravatar Brandon Williams1-0/+1
Stop including config.h by default in cache.h. Instead only include config.h in those files which require use of the config system. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-12gpg-interface: use more status lettersLibravatar Michael J Gruber1-3/+10
According to gpg2's doc/DETAILS: For each signature only one of the codes GOODSIG, BADSIG, EXPSIG, EXPKEYSIG, REVKEYSIG or ERRSIG will be emitted. gpg1 ("classic") behaves the same (although doc/DETAILS differs). Currently, we parse gpg's status output for GOODSIG, BADSIG and trust information and translate that into status codes G, B, U, N for the %G? format specifier. git-verify-* returns success in the GOODSIG case only. This is somewhat in disagreement with gpg, which considers the first 5 of the 6 above as VALIDSIG, but we err on the very safe side. Introduce additional status codes E, X, Y, R for ERRSIG, EXPSIG, EXPKEYSIG, and REVKEYSIG so that a user of %G? gets more information about the absence of a 'G' on first glance. Requested-by: Alex <agrambot@gmail.com> Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-16Merge branch 'lt/gpg-show-long-key-in-signature-verification-maint' into ↵Libravatar Junio C Hamano1-0/+1
lt/gpg-show-long-key-in-signature-verification Linus's original was rebased to apply to the maintenance track just in case binary distributors that are stuck in the past want to take it to their older codebase. Let's merge it up to more modern codebase that has Peff's gpg-interface clean-up topic that appeared after Git 2.9 was tagged. * lt/gpg-show-long-key-in-signature-verification-maint: gpg-interface: prefer "long" key format output when verifying pgp signatures
2016-08-16gpg-interface: prefer "long" key format output when verifying pgp signaturesLibravatar Linus Torvalds1-2/+2
Yes, gpg2 already uses the long format by default, but most distributions seem to still have "gpg" be the older 1.x version due to compatibility reasons. And older versions of gpg only show the 32-bit short ID, which is quite insecure. This doesn't actually matter for the _verification_ itself: if the verification passes, the pgp signature is good. But if you don't actually have the key yet, and want to fetch it, or you want to check exactly which key was used for verification and want to check it, we should specify the key with more precision. In fact, we should preferentially specify the whole key fingerprint, but gpg doesn't actually support that. Which is really quite sad. Showing the "long" format improves things to at least show 64 bits of the fingerprint. That's a lot better, even if it's not perfect. This change the log format for "git log --show-signature" from commit 2376d31787760af598db23bb3982a57419854e5c merged tag 'v2.9.3' gpg: Signature made Fri 12 Aug 2016 09:17:59 AM PDT using RSA key ID 96AFE6CB gpg: Good signature from "Junio C Hamano <gitster@pobox.com>" gpg: aka "Junio C Hamano <jch@google.com>" gpg: aka "Junio C Hamano <junio@pobox.com>" Merge: 2807cd7b25af e0c1ceafc5be Author: Junio C Hamano <gitster@pobox.com> Date: Fri Aug 12 10:02:18 2016 -0700 to commit 2376d31787760af598db23bb3982a57419854e5c merged tag 'v2.9.3' gpg: Signature made Fri 12 Aug 2016 09:17:59 AM PDT gpg: using RSA key B0B5E88696AFE6CB gpg: Good signature from "Junio C Hamano <gitster@pobox.com>" gpg: aka "Junio C Hamano <jch@google.com>" gpg: aka "Junio C Hamano <junio@pobox.com>" Merge: 2807cd7b25af e0c1ceafc5be Author: Junio C Hamano <gitster@pobox.com> Date: Fri Aug 12 10:02:18 2016 -0700 (note the longer key ID, but also the reflowing of the text) and also changes the format in the merge messages when merging a signed tag. If you already use gpg2 (either because it's installed by default, or because you have set your gpg_program configuration to point to gpg2), that already used the long format, you'll also see a change: it will now have the same formatting as gpg 1.x, and the verification string looks something like gpg: Signature made Sun 24 Jul 2016 12:24:02 PM PDT gpg: using RSA key 79BE3E4300411886 gpg: Good signature from "Linus Torvalds <torvalds@linux-foundation.org>" [ultimate] where it used to be on one line: gpg: Signature made Sun 24 Jul 2016 12:24:02 PM PDT using RSA key ID 79BE3E4300411886 gpg: Good signature from "Linus Torvalds <torvalds@linux-foundation.org>" [ultimate] so there is certainly a chance this could break some automated scripting. But the 32-bit key ID's really are broken. Also note that because of the differences between gpg-1.x and gpg-2.x, hopefully any scripted key ID parsing code (if such code exists) is already flexible enough to not care. This was triggered by the fact that the "evil32" project keys ended up leaking to the public key servers, so now there are 32-bit aliases for just about every open source developer that you can easily get by mistake if you use the 32-bit short ID format. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-17gpg-interface: check gpg signature creation statusLibravatar Michael J Gruber1-2/+6
When we create a signature, it may happen that gpg returns with "success" but not with an actual detached signature on stdout. Check for the correct signature creation status to catch these cases better. Really, --status-fd parsing is the only way to check gpg status reliably. We do the same for verify already. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-17sign_buffer: use pipe_commandLibravatar Jeff King1-19/+5
Similar to the prior commit for verify_signed_buffer, the motivation here is both to make the code simpler, and to avoid any possible deadlocks with gpg. In this case we have the same "write to stdin, then read from stdout" that the verify case had. This is unlikely to be a problem in practice, since stdout has the detached signature, which it cannot compute until it has read all of stdin (if it were a non-detached signature, that would be a problem, though). We don't read from stderr at all currently. However, we will want to in a future patch, so this also prepares us there (and in that case gpg _does_ write before reading all of the input, though again, it is unlikely that a key uid will fill up a pipe buffer). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-17verify_signed_buffer: use pipe_commandLibravatar Jeff King1-19/+3
This is shorter and should make the function easier to follow. But more importantly, it removes the possibility of any deadlocks based on reading or writing to gpg. It's not clear if such a deadlock is possible in practice. We do write the whole payload before reading anything, so we could deadlock there. However, in practice gpg will need to read our whole input to verify the signature, so it will drain our payload first. It could write an error to stderr before reading, but it's unlikely that such an error wouldn't be followed by it immediately exiting, or that the error would actually be larger than a pipe buffer. On the writing side, we drain stderr (with the human-readable output) in its entirety before reading stdout (with the status-fd data). Running strace on "gpg --verify" does show interleaved output on the two descriptors: write(2, "gpg: ", 5) = 5 write(2, "Signature made Thu 16 Jun 2016 0"..., 73) = 73 write(1, "[GNUPG:] SIG_ID tQw8KGcs9rBfLvAj"..., 66) = 66 write(1, "[GNUPG:] GOODSIG 69808639F9430ED"..., 60) = 60 write(2, "gpg: ", 5) = 5 write(2, "Good signature from \"Jeff King <"..., 47) = 47 write(2, "\n", 1) = 1 write(2, "gpg: ", 5) = 5 write(2, " aka \"Jeff King <"..., 49) = 49 write(2, "\n", 1) = 1 write(1, "[GNUPG:] VALIDSIG C49CE24156AF08"..., 135) = 135 write(1, "[GNUPG:] TRUST_ULTIMATE\n", 24) = 24 The second line written to stdout there contains the signer's UID, which can be arbitrarily long. If it fills the pipe buffer, then gpg would block writing to its stdout, while we are blocked trying to read its stderr. In practice, GPG seems to limit UIDs to 2048 bytes, so unless your pipe buffer size is quite small, or unless gpg does not enforce the limit under some conditions, this seems unlikely in practice. Still, it is not hard for us to be cautious and just use pipe_command. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-17verify_signed_buffer: use tempfile objectLibravatar Jeff King1-8/+13
We use git_mkstemp to create a temporary file, and try to clean it up in all exit paths from the function. But that misses any cases where we die by signal, or by calling die() in a sub-function. In addition, we missed one of the exit paths. Let's convert to using a tempfile object, which handles the hard cases for us, and add the missing cleanup call. Note that we would not simply want to rely on program exit to catch our missed cleanup, as this function may be called many times in a single program (for the same reason, we use a static tempfile instead of heap-allocating a new one; that gives an upper bound on our memory usage). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-17verify_signed_buffer: drop pbuf variableLibravatar Jeff King1-5/+4
If our caller gave us a non-NULL gpg_status parameter, we write the gpg status into their strbuf. If they didn't, then we write it to a temporary local strbuf (since we still need to look at it). The variable "pbuf" adds an extra layer of indirection so that the rest of the function can just access whichever is appropriate. However, the name "pbuf" isn't very descriptive, and it's easy to get confused about what is supposed to be in it (especially because we are reading both "status" and "output" from gpg). Rather than give it a more descriptive name, we can just use gpg_status as our indirection pointer. Either it points to the caller's input, or we can point it directly to our temporary buffer. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-17gpg-interface: use child_process.argsLibravatar Jeff King1-10/+9
Our argv allocations are relatively straightforward, but this avoids us having to manually keep the count up to date (or create new to-be-replaced slots in the declaration) when we add new arguments. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-17Merge branch 'nd/error-errno'Libravatar Junio C Hamano1-4/+2
The code for warning_errno/die_errno has been refactored and a new error_errno() reporting helper is introduced. * nd/error-errno: (41 commits) wrapper.c: use warning_errno() vcs-svn: use error_errno() upload-pack.c: use error_errno() unpack-trees.c: use error_errno() transport-helper.c: use error_errno() sha1_file.c: use {error,die,warning}_errno() server-info.c: use error_errno() sequencer.c: use error_errno() run-command.c: use error_errno() rerere.c: use error_errno() and warning_errno() reachable.c: use error_errno() mailmap.c: use error_errno() ident.c: use warning_errno() http.c: use error_errno() and warning_errno() grep.c: use error_errno() gpg-interface.c: use error_errno() fast-import.c: use error_errno() entry.c: use error_errno() editor.c: use error_errno() diff-no-index.c: use error_errno() ...
2016-05-09gpg-interface.c: use error_errno()Libravatar Nguyễn Thái Ngọc Duy1-4/+2
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-04-06builtin/verify-tag.c: ignore SIGPIPE in gpg-interfaceLibravatar Santiago Torres1-0/+2
The verify_signed_buffer() function may trigger a SIGPIPE when the GPG child process terminates early (due to a bad keyid, for example) and Git tries to write to it afterwards. Previously, ignoring SIGPIPE was done in builtin/verify-tag.c to avoid this issue. However, any other caller who wants to call verify_signed_buffer() would have to do the same. Use sigchain_push(SIGPIPE, SIG_IGN) in verify_signed_buffer(), pretty much like in sign_buffer(), so that any caller is not required to perform this task. This will avoid possible mistakes by further developers using verify_signed_buffer(). Signed-off-by: Santiago Torres <santiago@nyu.edu> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-22verify-commit: add option to print raw gpg status informationLibravatar brian m. carlson1-2/+5
verify-commit by default displays human-readable output on standard error. However, it can also be useful to get access to the raw gpg status information, which is machine-readable, allowing automated implementation of signing policy. Add a --raw option to make verify-commit produce the gpg status information on standard error instead of the human-readable format. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-22gpg: centralize printing signature buffersLibravatar brian m. carlson1-0/+9
The code to handle printing of signature data from a struct signature_check is very similar between verify-commit and verify-tag. Place this in a single function. verify-tag retains its special case behavior of printing the tag even when no valid signature is found. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-22gpg: centralize signature checkLibravatar brian m. carlson1-1/+3
verify-commit and verify-tag both share a central codepath for verifying commits: check_signature. However, verify-tag exited successfully for untrusted signature, while verify-commit exited unsuccessfully. Centralize this signature check and make verify-commit adopt the older verify-tag behavior. This behavior is more logical anyway, as the signature is in fact valid, whether or not there's a path of trust to the author. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-22verify-tag: share code with verify-commitLibravatar brian m. carlson1-0/+23
verify-tag was executing an entirely different codepath than verify-commit, except for the underlying verify_signed_buffer. Move much of the code from check_commit_signature to a generic check_signature function and adjust both codepaths to call it. Update verify-tag to explicitly output the signature text, as we now call verify_signed_buffer with strbufs to catch the output, which prevents it from being printed automatically. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-08Merge branch 'jc/push-cert'Libravatar Junio C Hamano1-0/+57
Allow "git push" request to be signed, so that it can be verified and audited, using the GPG signature of the person who pushed, that the tips of branches at a public repository really point the commits the pusher wanted to, without having to "trust" the server. * jc/push-cert: (24 commits) receive-pack::hmac_sha1(): copy the entire SHA-1 hash out signed push: allow stale nonce in stateless mode signed push: teach smart-HTTP to pass "git push --signed" around signed push: fortify against replay attacks signed push: add "pushee" header to push certificate signed push: remove duplicated protocol info send-pack: send feature request on push-cert packet receive-pack: GPG-validate push certificates push: the beginning of "git push --signed" pack-protocol doc: typofix for PKT-LINE gpg-interface: move parse_signature() to where it should be gpg-interface: move parse_gpg_output() to where it should be send-pack: clarify that cmds_sent is a boolean send-pack: refactor inspecting and resetting status and sending commands send-pack: rename "new_refs" to "need_pack_data" receive-pack: factor out capability string generation send-pack: factor out capability string generation send-pack: always send capabilities send-pack: refactor decision to send update per ref send-pack: move REF_STATUS_REJECT_NODELETE logic a bit higher ...
2014-09-15gpg-interface: move parse_signature() to where it should beLibravatar Junio C Hamano1-0/+21
Our signed-tag objects set the standard format used by Git to store GPG-signed payload (i.e. the payload followed by its detached signature) [*1*], and it made sense to have a helper to find the boundary between the payload and its signature in tag.c back then. Newer code added later to parse other kinds of objects that learned to use the same format to store GPG-signed payload (e.g. signed commits), however, kept using the helper from the same location. Move it to gpg-interface; the helper is no longer about signed tag, but it is how our code and data interact with GPG. [Reference] *1* http://thread.gmane.org/gmane.linux.kernel/297998/focus=1383 Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-15gpg-interface: move parse_gpg_output() to where it should beLibravatar Junio C Hamano1-0/+36
Earlier, ffb6d7d5 (Move commit GPG signature verification to commit.c, 2013-03-31) moved this helper that used to be in pretty.c (i.e. the output code path) to commit.c for better reusability. It was a good first step in the right direction, but still suffers from a myopic view that commits will be the only thing we would ever want to sign---we would actually want to be able to reuse it even wider. The function interprets what GPG said; gpg-interface is obviously a better place. Move it there. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-20run-command: introduce CHILD_PROCESS_INITLibravatar René Scharfe1-4/+2
Most struct child_process variables are cleared using memset first after declaration. Provide a macro, CHILD_PROCESS_INIT, that can be used to initialize them statically instead. That's shorter, doesn't require a function call and is slightly more readable (especially given that we already have STRBUF_INIT, ARGV_ARRAY_INIT etc.). Helped-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-23gpg-interface: provide access to the payloadLibravatar Michael J Gruber1-0/+2
In contrast to tag signatures, commit signatures are put into the header, that is between the other header parts and commit messages. Provide access to the commit content sans the signature, which is the payload that is actually signed. Commit signature verification does the parsing anyways, and callers may wish to act on or display the commit object sans the signature. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-23gpg-interface: provide clear helper for struct signature_checkLibravatar Michael J Gruber1-0/+12
The struct has been growing members whose malloced memory needs to be freed. Do this with one helper function so that no malloced memory shall be left unfreed. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-21Merge branch 'mg/gpg-interface-using-status'Libravatar Junio C Hamano1-3/+15
Call "gpg" using the right API when validating the signature on tags. * mg/gpg-interface-using-status: pretty: make %GK output the signing key for signed commits pretty: parse the gpg status lines rather than the output gpg_interface: allow to request status return log-tree: rely upon the check in the gpg_interface gpg-interface: check good signature in a reliable way
2013-02-14gpg_interface: allow to request status returnLibravatar Michael J Gruber1-4/+7
Currently, verify_signed_buffer() returns the user facing output only. Allow callers to request the status output also. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-14gpg-interface: check good signature in a reliable wayLibravatar Michael J Gruber1-2/+11
Currently, verify_signed_buffer() only checks the return code of gpg, and some callers implement additional unreliable checks for "Good signature" in the gpg output meant for the user. Use the status output instead and parse for a line beinning with "[GNUPG:] GOODSIG ". This is the only reliable way of checking for a good gpg signature. If needed we can change this easily to "[GNUPG:] VALIDSIG " if we want to take into account the trust model. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-07Merge branch 'sb/gpg-plug-fd-leak' into maintLibravatar Junio C Hamano1-1/+3
We forgot to close the file descriptor reading from "gpg" output, killing "git log --show-signature" on a long history. * sb/gpg-plug-fd-leak: gpg: close stderr once finished with it in verify_signed_buffer()
2013-02-07Merge branch 'sb/gpg-i18n'Libravatar Junio C Hamano1-3/+3
* sb/gpg-i18n: gpg: allow translation of more error messages
2013-02-05Merge branch 'sb/gpg-plug-fd-leak'Libravatar Junio C Hamano1-1/+3
We forgot to close the file descriptor reading from "gpg" output, killing "git log --show-signature" on a long history. * sb/gpg-plug-fd-leak: gpg: close stderr once finished with it in verify_signed_buffer()
2013-01-31gpg: close stderr once finished with it in verify_signed_buffer()Libravatar Stephen Boyd1-1/+3
Failing to close the stderr pipe in verify_signed_buffer() causes git to run out of file descriptors if there are many calls to verify_signed_buffer(). An easy way to trigger this is to run git log --show-signature --merges | grep "key" on the linux kernel git repo. Eventually it will fail with error: cannot create pipe for gpg: Too many open files error: could not run gpg. Close the stderr pipe so that this can't happen. Suggested-by: Jeff King <peff@peff.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-31gpg: allow translation of more error messagesLibravatar Stephen Boyd1-3/+3
Mark these strings for translation so that error messages are printed in the user's language of choice. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-24ident: rename IDENT_ERROR_ON_NO_NAME to IDENT_STRICTLibravatar Jeff King1-1/+1
Callers who ask for ERROR_ON_NO_NAME are not so much concerned that the name will be blank (because, after all, we will fall back to using the username), but rather it is a check to make sure that low-quality identities do not end up in things like commit messages or emails (whereas it is OK for them to end up in things like reflogs). When future commits add more quality checks on the identity, each of these callers would want to use those checks, too. Rather than modify each of them later to add a new flag, let's refactor the flag. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>