summaryrefslogtreecommitdiff
path: root/gitweb
AgeCommit message (Collapse)AuthorFilesLines
2009-02-19gitweb: Hyperlink multiple git hashes on the same commit message lineLibravatar Marcel M. Cary1-7/+5
The current implementation only hyperlinks the first hash on a given line of the commit message. It seems sensible to highlight all of them if there are multiple, and it seems plausible that there would be multiple even with a tidy line length limit, because they can be abbreviated as short as 8 characters. Benchmark: I wanted to make sure that using the 'e' switch to the Perl regex wasn't going to kill performance, since this is called once per commit message line displayed. In all three A/B scenarios I tried, the A and B yielded the same results within 2%, where A is the version of code before this patch and B is the version after. 1: View a commit message containing the last 1000 commit hashes 2: View a commit message containing 1000 lines of 40 dots to avoid hyperlinking at the same message length 3: View a short merge commit message with a few lines of text and no hashes All were run in CGI mode on my sub-production hardware on a recent clone of git.git. Numbers are the average of 10 reqests per second with the first request discarded, since I expect this change to affect primarily CPU usage. Measured with ApacheBench. Note that the web page rendered was the same; while the new code supports multiple hashes per line, there was at most one per line. The primary purpose of scenarios 2 and 3 were to verify that the addition of 1000 commit messages had an impact on how much of the time was spent rendering commit messages. They were all within 2% of 0.80 requests per second (much faster). So I think the patch has no noticeable effect on performance. Signed-off-by: Marcel M. Cary <marcel@oak.homeunix.org> Acked-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-18gitweb: Fix warnings with override permitted but no repo overrideLibravatar Marcel M. Cary1-6/+10
When a feature like "blame" is permitted to be overridden in the repository configuration but it is not actually set in the repository, a warning is emitted due to the undefined value of the repository configuration, even though it's a perfectly normal condition. Emitting warning is grounds for test failure in the gitweb test script. This error was caused by rewrite of git_get_project_config from using "git config [<type>] <name>" for each individual configuration variable checked to parsing "git config --list --null" output in commit b201927 (gitweb: Read repo config using 'git config -z -l'). Earlier version of git_get_project_config was returning empty string if variable do not exist in config; newer version is meant to return undef in this case, therefore change in feature_bool was needed. Additionally config_to_* subroutines were meant to be invoked only if configuration variable exists; therefore we added early return to git_get_project_config: it now returns no value if variable does not exists in config. Otherwise config_to_* subroutines (config_to_bool in paryicular) wouldn't be able to distinguish between the case where variable does not exist and the case where variable doesn't have value (the "[section] noval" case, which evaluates to true for boolean). While at it fix bug in config_to_bool, where checking if $val is defined (if config variable has value) was done _after_ stripping leading and trailing whitespace, which lead to 'Use of uninitialized value' warning. Add test case for features overridable but not overriden in repo config, and case for no value boolean configuration variable. Signed-off-by: Marcel M. Cary <marcel@oak.homeunix.org> Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-16gitweb: fix wrong base URL when non-root DirectoryIndexLibravatar Giuseppe Bilotta1-6/+22
CGI::url() has some issues when rebuilding the script URL if the script is a DirectoryIndex. One of these issue is the inability to strip PATH_INFO, which is why we had to do it ourselves. Another issue is that the resulting URL cannot be used for the <base> tag: it works if we're the DirectoryIndex at the root level, but not otherwise. We fix this by building the proper base URL ourselves, and improve the comment about the need to strip PATH_INFO manually while we're at it. Additionally t/t9500-gitweb-standalone-no-errors.sh had to be modified to set SCRIPT_NAME variable (CGI standard states that it MUST be set, and now gitweb uses it if PATH_INFO is not empty, as is the case for some of tests in t9500). Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-15Merge branch 'jn/gitweb-committag'Libravatar Junio C Hamano1-1/+1
* jn/gitweb-committag: gitweb: Better regexp for SHA-1 committag match
2009-02-08Merge branch 'maint'Libravatar Junio C Hamano2-3/+27
* maint: gitweb: add $prevent_xss option to prevent XSS by repository content rev-list: fix showing distance when using --bisect-all
2009-02-08gitweb: add $prevent_xss option to prevent XSS by repository contentLibravatar Matt McCutchen2-3/+27
Add a gitweb configuration variable $prevent_xss that disables features to prevent content in repositories from launching cross-site scripting (XSS) attacks in the gitweb domain. Currently, this option makes gitweb ignore README.html (a better solution may be worked out in the future) and serve a blob_plain file of an untrusted type with "Content-Disposition: attachment", which tells the browser not to show the file at its original URL. The XSS prevention is currently off by default. Signed-off-by: Matt McCutchen <matt@mattmccutchen.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-07gitweb: Better regexp for SHA-1 committag matchLibravatar Jakub Narebski1-1/+1
Make SHA-1 regexp to be turned into hyperlink (the SHA-1 committag) to match word boundary at the beginning and the end. This way we reduce number of false matches, for example we now don't match 0x74a5cd01 which is hex decimal (for example memory address), but is not SHA-1. Suggested-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-01gitweb: Update README that gitweb works better with PATH_INFOLibravatar Jakub Narebski1-6/+4
One had to configure gitweb for it to find static files (stylesheets, images) when using path_info URLs. Now that it is not necessary thanks to adding BASE element to HTML head if needed, update README to reflect this fact. Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-30gitweb: align comments to codeLibravatar Giuseppe Bilotta1-4/+4
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Acked-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-30gitweb: webserver config for PATH_INFOLibravatar Giuseppe Bilotta1-0/+76
Document some possible Apache configurations when the path_info feature is enabled in gitweb. Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Acked-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-30gitweb: make static files accessible with PATH_INFOLibravatar Giuseppe Bilotta1-0/+5
Gitweb links to a number of static files such as CSS stylesheets, favicon or the git logo. When, such as with the default Makefile, the paths to these files are relative (i.e. doesn't start with a "/"), the files become inaccessible in any view other tha project list and summary page if gitweb is invoked with a non-empty PATH_INFO. Fix this by adding a <base> element pointing to the script's own URL, which ensure that all relative paths will be resolved correctly. Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Acked-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-28gitweb: check if-modified-since for feedsLibravatar Giuseppe Bilotta1-1/+19
Offering Last-modified header for feeds is only half the work, even if we bail out early on HEAD requests. We should also check that same date against If-modified-since, and bail out early with 304 Not Modified if that's the case. Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-28gitweb: last-modified time should be commiter, not authorLibravatar Giuseppe Bilotta1-1/+1
The last-modified time header added by RSS to increase cache hits from readers should be set to the date the repository was last modified. The author time in this respect is not a good guess because the last commit might come from a oldish patch. Use the committer time for the last-modified header to ensure a more correct guess of the last time the repository was modified. Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-28gitweb: rss channel dateLibravatar Giuseppe Bilotta1-0/+4
The RSS 2.0 specifications defines not one but _two_ dates for its channel element! Woohoo! Luckily, it seems that consensus seems to be that if both are present they should be equal, except for some very obscure and discouraged cases. Since lastBuildDate would make more sense for us and pubDate seems to be the most commonly used, we defined both and make them equal. Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-28gitweb: rss feed managingEditorLibravatar Giuseppe Bilotta1-1/+3
The RSS 2.0 specification allows an optional managingEditor tag for the channel, containing the "email address for person responsible for editorial content", which is basically the project owner. Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-28gitweb: feed generator metadataLibravatar Giuseppe Bilotta1-0/+2
Add <generator> tag to RSS and Atom feed. Versioning info (gitweb/git core versions, separated by a literal slash) is stored in the appropriate attribute for the Atom feed, and in the tag content for the RSS feed. Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-28gitweb: channel image in rss feedLibravatar Giuseppe Bilotta1-0/+10
Define the channel image for the rss feed when the logo or favicon are defined, preferring the former to the latter. As suggested in the RSS 2.0 specifications, the image's title and link as set to the same as the channel's. Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-17Merge branch 'gb/gitweb-opml'Libravatar Junio C Hamano1-3/+7
* gb/gitweb-opml: gitweb: suggest name for OPML view gitweb: don't use pathinfo for global actions
2009-01-17Merge branch 'gb/gitweb-patch'Libravatar Junio C Hamano1-3/+110
* gb/gitweb-patch: gitweb: link to patch(es) view in commit(diff) and (short)log view gitweb: add patches view gitweb: change call pattern for git_commitdiff gitweb: add patch view Conflicts: gitweb/gitweb.perl
2009-01-10gitweb: suggest name for OPML viewLibravatar Giuseppe Bilotta1-1/+5
Suggest opml.xml as name for OPML view by providing the appropriate header, consistently with similar usage in project_index view. Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Acked-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-07Merge branch 'mk/gitweb-feature'Libravatar Junio C Hamano1-32/+9
* mk/gitweb-feature: gitweb: unify boolean feature subroutines
2009-01-07Merge branch 'jn/gitweb-blame'Libravatar Junio C Hamano1-35/+51
* jn/gitweb-blame: gitweb: cache $parent_commit info in git_blame() gitweb: A bit of code cleanup in git_blame() gitweb: Move 'lineno' id from link to row element in git_blame
2009-01-06gitweb: don't use pathinfo for global actionsLibravatar Giuseppe Bilotta1-2/+2
With PATH_INFO urls, actions for the projects list (e.g. opml, project_index) were being put in the URL right after the base. The resulting URL is not properly parsed by gitweb itself, since it expects a project name as first component of the URL. Accepting global actions in use_pathinfo is not a very robust solution due to possible present and future conflicts between project names and global actions, therefore we just refuse to create PATH_INFO URLs when the project is not defined. Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Acked-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-05gitweb: use href() when generating URLs in OPMLLibravatar Giuseppe Bilotta1-2/+2
Since the OPML project list view was hand-coding the RSS and HTML URLs, it didn't respect global options such as use_pathinfo. Make it use href() to ensure consistency with the rest of the gitweb setup. Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Acked-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-27gitweb: Fix export check in git_get_projects_listLibravatar Devin Doucette1-2/+3
When $filter was empty, the path passed to check_export_ok would contain an extra '/', which some implementations of export_auth_hook are sensitive to. It makes more sense to fix this here than to handle the special case in each implementation of export_auth_hook. Signed-off-by: Devin Doucette <devin@doucette.cc> Acked-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-21gitweb: link to patch(es) view in commit(diff) and (short)log viewLibravatar Giuseppe Bilotta1-2/+28
We link to patch view in commit and commitdiff view, and to patches view in log and shortlog view. In (short)log view, the link is only offered when the number of commits shown is no more than the allowed maximum number of patches. Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-21gitweb: add patches viewLibravatar Giuseppe Bilotta1-1/+14
The only difference between patch and patches view is in the treatement of single commits: the former only displays a single patch, whereas the latter displays a patchset leading to the specified commit. Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-21gitweb: change call pattern for git_commitdiffLibravatar Giuseppe Bilotta1-3/+4
Since we are going to introduce an additional parameter for git_commitdiff to tune patch view, we switch to named/hash-based parameter passing for clarity and robustness. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-21gitweb: add patch viewLibravatar Giuseppe Bilotta1-1/+68
The output of commitdiff_plain is not intended for git-am: * when given a range of commits, commitdiff_plain publishes a single patch with the message from the first commit, instead of a patchset * the hand-built email format replicates the commit summary both as email subject and as first line of the email itself, resulting in a duplication if the output is used with git-am. We thus create a new view that can be fed to git-am directly, allowing patch exchange via gitweb. The new view exposes the output of git format-patch directly, limiting it to a single patch in the case of a single commit. A configurable upper limit defaulting to 16 is imposed on the number of commits which will be included in a patchset, to prevent DoS attacks on the server. Setting the limit to 0 will disable the patch view, setting it to a negative number will remove the limit. Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-16gitweb: do not run "git diff" that is PorcelainLibravatar Junio C Hamano1-37/+3
Jakub says that legacy-style URI to view two blob differences are never generated since 1.4.3. This codepath runs "git diff" Porcelain from the gitweb, which is a no-no. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-15gitweb: unify boolean feature subroutinesLibravatar Matt Kraai1-32/+9
The boolean feature subroutines behaved identically except for the name of the configuration option, so make that a parameter and unify them. Signed-off-by: Matt Kraai <kraai@ftbfs.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-10gitweb: cache $parent_commit info in git_blame()Libravatar Jakub Narebski1-5/+11
Luben Tuikov changed 'lineno' link from leading to commit which gave current version of given block of lines, to leading to parent of this commit in 244a70e (Blame "linenr" link jumps to previous state at "orig_lineno"). This made possible data mining using 'blame' view. The current implementation calls rev-parse once per each blamed line to find parent revision of blamed commit, even when the same commit appears more than once, which is inefficient. This patch mitigates this issue by caching $parent_commit info in %metainfo, which makes gitweb call rev-parse only once per each unique commit in the output from "git blame". In the tables below you can see simple benchmark comparing gitweb performance before and after this patch File | L[1] | C[2] || Time0[3] | Before[4] | After[4] ==================================================================== blob.h | 18 | 4 || 0m1.727s | 0m2.545s | 0m2.474s GIT-VERSION-GEN | 42 | 13 || 0m2.165s | 0m2.448s | 0m2.071s README | 46 | 6 || 0m1.593s | 0m2.727s | 0m2.242s revision.c | 1923 | 121 || 0m2.357s | 0m30.365s | 0m7.028s gitweb/gitweb.perl | 6291 | 428 || 0m8.080s | 1m37.244s | 0m20.627s File | L/C | Before/After ========================================= blob.h | 4.5 | 1.03 GIT-VERSION-GEN | 3.2 | 1.18 README | 7.7 | 1.22 revision.c | 15.9 | 4.32 gitweb/gitweb.perl | 14.7 | 4.71 As you can see the greater ratio of lines in file to unique commits in blame output, the greater gain from the new implementation. Legend: [1] Number of lines: $ wc -l <file> [2] Number of unique commits in the blame output: $ git blame -p <file> | grep author-time | wc -l [3] Time for running "git blame -p" (user time, single run): $ time git blame -p <file> >/dev/null [4] Time to run gitweb as Perl script from command line: $ gitweb-run.sh "p=.git;a=blame;f=<file>" > /dev/null 2>&1 The gitweb-run.sh script includes slightly modified (with adjusted pathnames) code from gitweb_run() function from the test script t/t9500-gitweb-standalone-no-errors.sh; gitweb config file gitweb_config.perl contents (again up to adjusting pathnames; in particular $projectroot variable should point to top directory of git repository) can be found in the same place. Discussion ~~~~~~~~~~ A possible future improvement would be to open a bidi pipe to "git cat-file --batch-check", (like in Git::Repo in gitweb caching by Lea Wiemann), feed $long_rev^ to it, and parse its output, which is in the following form: 926b07e694599d86cec668475071b32147c95034 commit 637 This would mean one call to git-cat-file for the whole 'blame' view, instead of one call to git-rev-parse per each unique commit in blame output. Yet another solution would be to change use of validate_refname() to validate_revision() when checking script parameters (CGI query or path_info), with validate_revision being something like the following: sub validate_revision { my $rev = shift; return validate_refname(strip_rev_suffixes($rev)); } so we don't need to calculate $long_rev^, but can pass "$long_rev^" as 'hb' parameter. This solution has the advantage that it can be easily adapted to future incremental blame output. Signed-off-by: Jakub Narebski <jnareb@gmail.com> Acked-by: Luben Tuikov <ltuikov@yahoo.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-10gitweb: A bit of code cleanup in git_blame()Libravatar Jakub Narebski1-28/+39
Among others, here are the highlights: * move variable declaration closer to the place it is set and used, if possible, * uniquify and simplify coding style a bit, which includes removing unnecessary '()'. * check type only if $hash was defined, as otherwise from the way git_get_hash_by_path() is called (and works), we know that it is a blob, * use modern calling convention for git-blame, * remove unused variable, * don't use implicit variables ($_), * add some comments Signed-off-by: Jakub Narebski <jnareb@gmail.com> Acked-by: Luben Tuikov <ltuikov@yahoo.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-09gitweb: Move 'lineno' id from link to row element in git_blameLibravatar Jakub Narebski1-2/+1
Move l<line number> ID from <a> link element inside table row (inside cell element for column with line numbers), to encompassing <tr> table row element. It was done to make it easier to manipulate result HTML with DOM, and to be able write 'blame_incremental' view with the same, or nearly the same result. Signed-off-by: Jakub Narebski <jnareb@gmail.com> Acked-by: Luben Tuikov <ltuikov@yahoo.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-08gitweb: Fix bug in insert_file() subroutineLibravatar Jakub Narebski1-1/+1
In insert_file() subroutine (which is used to insert HTML fragments as custom header, footer, hometext (for projects list view), and per project README.html (for summary view)) we used: map(to_utf8, <$fd>); This doesn't work, and other form has to be used: map { to_utf8($_) } <$fd>; Now with test for t9600 added, for $GIT_DIR/README.html. Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-07Merge branch 'maint'Libravatar Junio C Hamano1-0/+1
* maint: GIT 1.6.0.5 "git diff <tree>{3,}": do not reverse order of arguments tag: delete TAG_EDITMSG only on successful tag gitweb: Make project specific override for 'grep' feature work http.c: use 'git_config_string' to get 'curl_http_proxy' fetch-pack: Avoid memcpy() with src==dst
2008-12-07gitweb: Make project specific override for 'grep' feature workLibravatar Jakub Narebski1-0/+1
The 'grep' feature was marked in the comments as having project specific config, but it lacked 'sub' key required for it to work. Kind-of-Noticed-by: Matt Kraai <kraai@ftbfs.org> Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-03Merge branch 'jn/gitweb-utf8'Libravatar Junio C Hamano1-16/+16
* jn/gitweb-utf8: gitweb: Fix handling of non-ASCII characters in inserted HTML files
2008-12-02gitweb: Fix handling of non-ASCII characters in inserted HTML filesLibravatar Jakub Narebski1-16/+16
Use new insert_file() subroutine to insert HTML chunks from external files: $site_header, $home_text (by default indextext.html), $site_footer, and $projectroot/$project/REAME.html. All non-ASCII chars of those files will be broken by Perl IO layer without decoding to utf8, so insert_file() does to_utf8() on each printed line; alternate solution would be to open those files with "binmode $fh, ':utf8'", or even all files with "use open qw(:std :utf8)". Note that inserting README.html lost one of checks for simplicity. Noticed-by: Tatsuki Sugiura <sugi@nemui.org> Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-02Update comment on gitweb_check/get_featureLibravatar Giuseppe Bilotta1-1/+3
This is taken from a patch from Giuseppe but unfortunately it came too late to replace the series that was already on "next". The comment he updated here is better than the version we had previously, so I am cherry-picking this bit not to lose it. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-30gitweb: make gitweb_check_feature a boolean wrapperLibravatar Giuseppe Bilotta1-20/+36
The gitweb_get_feature() function retrieves the configuration parameters for the feature (such as the list of snapshot formats or the list of additional actions), but it is very often used to see if feature is enabled (which is returned as the first element in the list). Because accepting the returned list in the scalar context by mistake yields the number of elements in the array, which is non-zero in all cases, such a mistake would result in a bug for the latter use, with disabled features appearing enabled. All existing callers that call the function for this purpose assign the return value in the list context to retrieve the first element, but that is only because we fixed careless callers recently. This adds gitweb_check_feature() as a wrapper to gitweb_get_feature() that can be called safely in the scalar context to see if a feature is enabled to reduce the risk of future bugs. Callers of "get" that use the call only to see if the feature is enabled are updated to call this wrapper. Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-30gitweb: rename gitweb_check_feature to gitweb_get_featureLibravatar Junio C Hamano1-23/+23
The function is about retrieving the configuration parameter list for the feature. A more robust way to check if a feature is enabled will be introduced in the next patch, and the function will be called gitweb_check_feature. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-30gitweb: fix 'ctags' feature check and othersLibravatar Junio C Hamano1-7/+7
gitweb_check_feature() function is to retrieve the configuration parameter list and calling it in the scalar context does not give its first element that tells if the feature is enabled. This fixes all the existing callers to call the function correctly in the list context. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-12Merge branch 'jn/gitweb-customlinks'Libravatar Junio C Hamano1-7/+12
* jn/gitweb-customlinks: gitweb: Better processing format string in custom links in navbar
2008-11-12Merge branch 'gb/gitweb-snapshot-pathinfo'Libravatar Junio C Hamano1-8/+63
* gb/gitweb-snapshot-pathinfo: gitweb: embed snapshot format parameter in PATH_INFO gitweb: retrieve snapshot format from PATH_INFO gitweb: make the supported snapshot formats array global
2008-11-06gitweb: Fix mod_perl support.Libravatar Alexander Gavrilov1-6/+6
ModPerl::Registry precompiles scripts by wrapping them in a subroutine. This causes ordinary subroutines of the script to become nested, and warnings appear: gitweb.cgi: Variable "$path_info" will not stay shared This warning means that $path_info was declared as 'my', and thus according to the perl evaluation rules all nested subroutines will retain a reference to the instance of the variable used in the first invocation of the master script. When the script (i.e. the master meta-subroutine) is executed the second time, it will use a new instance, so the logic breaks. To avoid this it is necessary to declare all global variables as 'our', which places them at the package level. Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com> Acked-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-06gitweb: Add a per-repository authorization hook.Libravatar Alexander Gavrilov2-1/+28
Add a configuration variable that can be used to specify an arbitrary subroutine that will be called in the same situations where $export_ok is checked, and its return value used to decide whether the repository is to be shown. This allows the user to implement custom authentication schemes, for example by issuing a subrequest through mod_perl and checking if Apache will authorize it. Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com> Acked-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-06gitweb: Use single implementation of export_ok check.Libravatar Alexander Gavrilov1-2/+1
GitWeb source contains a special function that implements the export_ok check, but validate_project still uses a separate copy of essentially the same code. This patch makes it use the dedicated function, thus ensuring that all checks are done through a single code path. Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com> Acked-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-05Merge branch 'jc/gitweb-fix-cloud-tag'Libravatar Junio C Hamano1-1/+5
* jc/gitweb-fix-cloud-tag: Fix reading of cloud tags
2008-11-02gitweb: embed snapshot format parameter in PATH_INFOLibravatar Giuseppe Bilotta1-0/+17
When PATH_INFO is active, get rid of the sf CGI parameter by embedding the snapshot format information in the PATH_INFO URL, in the form of an appropriate extension. Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>