| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Gitweb has several hard-coded 40 values throughout it to check for
values that are passed in or acquired from Git. To simplify the code,
introduce a regex variable that matches either exactly 40 or exactly 64
hex characters, and use this variable anywhere we would have previously
hard-coded a 40 in a regex.
Add some helper functions which allow us to write tighter regexes that
match exactly the number of hex characters we're expecting.
Similarly, switch the code that looks for deleted diffinfo information
to look for either 40 or 64 zeros, and update one piece of code to use
this function. Finally, when formatting a log line, allow an
abbreviated describe output to contain up to 64 characters.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since my d48b284183 ("perl: bump the required Perl version to 5.8 from
5.6.[21]", 2010-09-24), we've depended on 5.8, so there's no reason to
conditionally require Digest::MD5 anymore. It was released with perl
v5.7.3[1]
The initial introduction of the dependency in
e9fdd74e53 ("gitweb: (gr)avatar support", 2009-06-30) says as much,
this also undoes part of the later 2e9c8789b7 ("gitweb: Mention
optional Perl modules in INSTALL", 2011-02-04) since gitweb will
always be run on at least 5.8, so there's no need to mention
Digest::MD5 as a required module in the documentation, let's instead
say that we require perl 5.8.
1. $ corelist Digest::MD5
Data for 2015-02-14
Digest::MD5 was first released with perl v5.7.3
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"gitweb" checks if a directory is searchable with Perl's "-x"
operator, which can be enhanced by using "filetest 'access'"
pragma, which now we do.
* gc/gitweb-filetest-acl:
gitweb: use filetest to allow ACLs
|
|
In commit 46a1385 (gitweb: skip unreadable subdirectories, 2017-07-18)
we forgot to handle non-unix ACLs as well. Fix this.
Signed-off-by: Guillaume Castagnino <casta@xwing.info>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"gitweb" shows a link to visit the 'raw' contents of blbos in the
history overview page.
* js/gitweb-raw-blob-link-in-history:
gitweb: add 'raw' blob_plain link in history overview
|
|
When a directory is not readable, "gitweb" fails to build the
project list. Work this around by skipping such a directory.
It might end up hiding a problem under the rug and a better
solution might be to loudly complain to the administrator pointing
out the problematic directory, but this will at least make it
"work".
* hb/gitweb-project-list:
gitweb: skip unreadable subdirectories
|
|
For people that work with very large plain text files it may be easier
if one can bypass viewing the htmlized blob and instead click directly
to the raw file (rather then click through 'blob' and then to 'raw').
Signed-off-by: Job Snijders <job@instituut.net>
Reviewed-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a directory is not readable, "gitweb" fails to build the
project list. Work this around by skipping such a directory.
* hb/gitweb-project-list:
gitweb: skip unreadable subdirectories
|
|
gitweb terminates and shows no project list, if it can not access a
sub-directory in the project root directory while looking for projects
to show.
Work it around by skipping unreadable directories.
Signed-off-by: Hielke Christian Braun <hcb@unco.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Sven Strickroth <email@cs-ware.de>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In addition to purely abbreviated commit object names, "gitweb"
learned to turn "git describe" output (e.g. v2.9.3-599-g2376d31787)
into clickable links in its output.
* ab/gitweb-abbrev-links:
gitweb: link to "git describe"'d commits in log messages
gitweb: link to 7-char+ SHA-1s, not only 8-char+
gitweb: fix a typo in a comment
|
|
Change the log formatting function to know about "git describe" output
such as "v2.8.0-4-g867ad08", in addition to just plain "867ad08".
There are still many valid refnames that we don't link to
e.g. v2.10.0-rc1~2^2~1 is also a valid way to refer to
v2.8.0-4-g867ad08, but I'm not supporting that with this commit,
similarly it's trivially possible to create some refnames like
"æ/var-gf6727b0" or which won't be picked up by this regex.
There's surely room for improvement here, but I just wanted to address
the very common case of sticking "git describe" output into commit
messages without trying to link to all possible refnames, that's going
to be a rather futile exercise given that this is free text, and it
would be prohibitively expensive to look up whether the references in
question exist in our repository.
There was on-list discussion about how we could do better than this
patch. Junio suggested to update parse_commits() to call a new
"gitweb--helper" command which would pass each of the revision
candidates through "rev-parse --verify --quiet". That would cut down
on our false positives (e.g. we'll link to "deadbeef"), and also allow
us to be more aggressive in selecting candidate revisions.
That may be too expensive to work in practice, or it may
not. Investigating that would be a good follow-up to this patch.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the minimum length of an abbreviated object identifier in the
commit message gitweb tries to turn into link from 8 hexchars to 7.
This arbitrary minimum length of 8 was introduced in bfe2191 ("gitweb:
SHA-1 in commit log message links to "object" view", 2006-12-10), but
the default abbreviation length is 7, and has been for a long time.
It's still possible to reference SHA-1s down to 4 characters in length,
see v1.7.4-1-gdce9648's MINIMUM_ABBREV, but I can't see how to make
git actually produce that, so I doubt anyone is putting that into log
messages in practice, but people definitely do put 7 character SHA-1s
into log messages.
I think it's fairly dubious to link to things matching [0-9a-fA-F]
here as opposed to just [0-9a-f], that dates back to the initial
version of gitweb from 161332a ("first working version",
2005-08-07). Git will accept all-caps SHA-1s, but didn't ever produce
them as far as I can tell.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change a typo'd MIME type in a comment. The Content-Type is
application/xhtml+xml, not application/xhtm+xml.
Fixes up code originally added in 53c4031 ("gitweb: Strip
non-printable characters from syntax highlighter output", 2011-09-16).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "highlight" binary can, in some cases, determine the language type
by the means of file contents, for example the shebang in the first line
for some scripting languages. Make use of this autodetection for files
which syntax is not known by gitweb. In that case, pass the blob
contents to "highlight --force"; the parameter is needed to make it
always generate HTML output (which includes HTML-escaping).
Although we now run highlight on files which do not end up highlighted,
performance is virtually unaffected because when we call highlight, it
is used for escaping HTML. In the case that highlight is used, gitweb
calls sanitize() instead of esc_html(), and the latter is significantly
slower (it does more, being roughly a superset of sanitize()). Simple
benchmark comparing performance of 'blob' view of files without syntax
highlighting in gitweb before and after this change indicates ±1%
difference in request time for all file types. Benchmark was performed
on local instance on Debian, using Apache/2.4.23 web server and CGI.
Document the feature and improve syntax highlight documentation, add
test to ensure gitweb doesn't crash when language detection is used.
Signed-off-by: Ian Kelling <ian@iankelling.org>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ian Kelling <ian@iankelling.org>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a case where an html link can be generated from unescaped input
resulting in invalid strict xhtml or potentially injected code.
An overview of a repo with a tag "1.0.0&0.0.1" would previously result
in an unescaped ampersand in the link body.
Signed-off-by: Andreas Brauchli <a.brauchli@elementarea.net>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some multi-byte encoding can have a backslash byte as a later part
of one letter, which would confuse "highlight" filter used in
gitweb.
* sk/gitweb-highlight-encoding:
gitweb: apply fallback encoding before highlight
|
|
Some multi-byte character encodings (such as Shift_JIS and GBK) have
characters whose final bytes is an ASCII '\' (0x5c), and they
will be displayed as funny-characters even if $fallback_encoding is
correct. This is because `highlight` command always expects UTF-8
encoded strings from STDIN.
$ echo 'my $v = "申";' | highlight --syntax perl | w3m -T text/html -dump
my $v = "申";
$ echo 'my $v = "申";' | iconv -f UTF-8 -t Shift_JIS | highlight \
--syntax perl | iconv -f Shift_JIS -t UTF-8 | w3m -T text/html -dump
iconv: (stdin):9:135: cannot convert
my $v = "
This patch prepare git blob objects to be encoded into UTF-8 before
highlighting in the manner of `to_utf8` subroutine.
Signed-off-by: Shin Kojima <shin@kojima.org>
Reviewed-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git_object() chomps $type that is read from "cat-file -t", but
it does so before checking if $type is defined, resulting in
a Perl warning in the server error log:
gitweb.cgi: Use of uninitialized value $type in scalar chomp at
[...]/gitweb.cgi line 7579., referer: [...]
when trying to access a non-existing commit, for example:
http://HOST/?p=PROJECT.git;a=commit;h=NON_EXISTING_COMMIT
Check the value in $type before chomping. This will cause us to
call href with its action parameter set to undef when formulating
the URL to redirect to, but that is harmless, as the function treats
a parameter that set to undef as if it does not exist.
Signed-off-by: Øyvind A. Holm <sunny@sunbase.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As of CGI.pm's 4.08 release, the behavior to call
CGI::param() in a list context is deprecated (because it can
be potentially unsafe if called inside a hash constructor).
This causes gitweb to issue a warning for some of our code,
which in turn causes the tests to fail.
Our use is in fact _not_ one of the dangerous cases, as we
are intentionally using a list context. The recommended
route by 4.08 is to use the new CGI::multi_param() call to
make it explicit that we know what we are doing.
However, that function is only available in 4.08, which is
about a month old; we cannot rely on having it.
One option would be to set $CGI::LIST_CONTEXT_WARN globally,
which turns off the warning. However, that would eliminate
the protection these newer releases are trying to provide.
We want to annotate each site as OK using the new function.
So instead, let's check whether CGI provides the
multi_param() function, and if not, provide an
implementation that just wraps param(). That will work on
both old and new versions of CGI. Sadly, we cannot just
check defined(\&CGI::multi_param), because CGI uses the
autoload feature, which claims that all functions are
defined. Instead, we just do a version check.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
CGI.pm 4.04 removed the startform method, which had previously been
deprecated in favour of start_form. Changes file for CGI.pm says:
4.04 2014-09-04
[ REMOVED / DEPRECATIONS ]
- startform and endform methods removed (previously deprecated,
you should be using the start_form and end_form methods)
Signed-off-by: Roland Mas <lolando@debian.org>
Reviewed-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Eradicate mistaken use of "nor" (that is, essentially "nor" used
not in "neither A nor B" ;-)) from in-code comments, command output
strings, and documentations.
* jl/nor-or-nand-and:
code and test: fix misuses of "nor"
comments: fix misuses of "nor"
contrib: fix misuses of "nor"
Documentation: fix misuses of "nor"
|
|
Signed-off-by: Justin Lebar <jlebar@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When displaying a blob in gitweb, if it's an image, specify constraints for
maximum display width and height to prevent the image from overflowing the
frame of the enclosing page_body div.
This change assumes that it is more desirable to see the whole image without
scrolling (new behavior) than it is to see every pixel without zooming
(previous behavior).
Signed-off-by: Andrew Keller <andrew@kellerfarm.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Given two branches residing in refs/heads/master and refs/wip/feature
the list-of-branches view will present them in following way:
master
feature (wip)
When getting a snapshot of a 'feature' branch, the tarball is going to
have name like 'project-wip-feature-<short hash>.tgz'.
Signed-off-by: Krzesimir Nowak <krzesimir@endocode.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow extra-branch-refs feature to tell gitweb to show refs from
additional hierarchies in addition to branches in the list-of-branches
view.
Signed-off-by: Krzesimir Nowak <krzesimir@endocode.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Users of validate_* passing "0" might get failures on correct name
because of coercion of "0" to false in code like:
die_error(500, "invalid ref") unless (check_ref_format ("0"));
Also, the validate_foo subs are renamed to is_valid_foo.
Signed-off-by: Krzesimir Nowak <krzesimir@endocode.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This check will be used in more than one place later.
Signed-off-by: Krzesimir Nowak <krzesimir@endocode.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ab/gitweb-author-initials:
gitweb: Fix the author initials in blame for non-ASCII names
|
|
Tweak Gitweb CSS to layout some elements better.
* tf/gitweb-ss-tweak:
gitweb: make search help link less ugly
gitweb: omit the repository owner when it is unset
gitweb: vertically centre contents of page footer
gitweb: ensure OPML text fits inside its box
|
|
Change the @author_initials feature Jakub added in
v1.6.4-rc2-14-ga36817b to match non-ASCII author initials as intended.
The regexp Jakub added was intended to match
non-ASCII (/\b([[:upper:]])\B/g). But in Perl this doesn't actually
match non-ASCII upper-case characters unless the string being matched
against has the UTF8 flag.
So when we open a pipe to "git blame" we need to mark the file
descriptor we're opening as utf8 explicitly.
So as a result it abbreviates me to "AB" not "ÆAB", entirely because "Æ"
isn't /[[:upper:]]/ unless the string being matched against has the UTF8
flag.
Here's something that demonstrates the issue:
#!/usr/bin/env perl
use strict;
use warnings;
binmode STDOUT, ':utf8' if $ENV{UTF8};
open my $fd, "-|", "git", "blame", "--incremental", "--", "Makefile" or die "Can't open: $!";
binmode $fd, ":utf8" if $ENV{UTF8};
while (my $line = <$fd>) {
next unless my ($author) = $line =~ /^author (.*)/;
my @author_initials = ($author =~ /\b([[:upper:]])\B/g);
printf "%s (%s)\n", join("", @author_initials), $author;
}
When that's run with and without UTF8 being true in the environment it
gives, on git.git:
$ UTF8=0 perl author-initials.pl | sort | uniq -c |
sort -nr | head -n 5
99 JH (Junio C Hamano)
35 JN (Jonathan Nieder)
35 JK (Jeff King)
20 JS (Johannes Schindelin)
16 AB (Ævar Arnfjörð Bjarmason)
$ UTF8=1 perl author-initials.pl | sort | uniq -c |
sort -nr | head -n 5
99 JH (Junio C Hamano)
35 JN (Jonathan Nieder)
35 JK (Jeff King)
20 JS (Johannes Schindelin)
16 ÆAB (Ævar Arnfjörð Bjarmason)
Acked-by: Jakub Narębski <jnareb@gmail.com>
Tested-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Tested-by: Simon Ruderich <simon@ruderich.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The search help link was a superscript question mark right next to
a drop-down menu, which looks misaligned and is a cramped and
awkward click target. Remove the superscript tags and add some
spacing to fix these nits. Add a title attribute to provide an
explanatory mouseover.
Signed-off-by: Tony Finch <dot@dotat.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On the repository summary page, leave the owner line out if the
repo does not have an owner, rather than displaying a labelled empty
field. This does not affect the owner column in the projects list
page, which is present unless $omit_owner is true.
Signed-off-by: Tony Finch <dot@dotat.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are often parent pages logically above the gitweb projects
list, e.g. home pages of the organization and department that host
the gitweb server. This change allows you to include links to those
pages in gitweb's breadcrumb trail.
Signed-off-by: Tony Finch <dot@dotat.at>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The bug is manifest when running gitweb in a persistent process (e.g.
FastCGI, PSGI), and it's easy to reproduce. If a gitweb request
includes the searchtext parameter (i.e. s), subsequent requests using
the project_list action--which is the default action--and without
a searchtext parameter will be filtered by the searchtext value of the
first request. This is because the value of the $search_regexp global
(the value of which is based on the searchtext parameter) is currently
being persisted between requests.
Instead, clear $search_regexp before dispatching each request.
Signed-off-by: Charles McGarvey <chazmcgarvey@brokenzipper.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most of these were found using Lucas De Marchi's codespell tool.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With the current code, the images from picon and gravatar are
requested over http://, and browsers give mixed contents warning
when gitweb is served over https://.
Just drop the scheme: part from the URL, so that these external
sites are accessed over https:// in such a case.
Signed-off-by: Andrej E Baranov <admin@andrej-andb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"gitweb", when sorting by age to show repositories with new
activities first, used to sort repositories with absolutely nothing
in it early, which was not very useful.
* os/gitweb-highlight-uncaptured:
gitweb: fix error in sanitize when highlight is enabled
|
|
* md/gitweb-sort-by-age:
gitweb: Sort projects with undefined ages last
|
|
$1 becomes undef by internal regex, since it has no capture groups.
Match against accpetable control characters using index() instead of a regex.
Signed-off-by: Orgad Shaneh <orgads@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Sorting gitweb's project list by age ('Last Change') currently shows
projects with undefined ages at the head of the list. This gives a less
useful result when there are a number of projects that are missing or
otherwise faulty and one is trying to see what projects have been
updated recently.
Fix by sorting these projects with undefined ages at the bottom of the
list when sorting by age.
Signed-off-by: Matthew Daley <mattjd@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The key "gitweb.remote_heads" is not legal git config; this maps it to
"gitweb.remoteheads".
* pp/gitweb-config-underscore:
gitweb: make remote_heads config setting work
|
|
Syntax highlighting in "gitweb" was not quite working.
* rh/maint-gitweb-highlight-ext:
gitweb.perl: fix %highlight_ext mappings
|
|
Git configuration items can not contain underscores in their section
and bottom-level variable name; the 'remote_heads' feature can not
be enabled on a per-repository basis with that name.
This changes the git-config option to be `gitweb.remoteheads` but does
not change the gitweb.conf option, to avoid backwards compatibility
issues. We strip underscores from keys before looking through
git-config output for them.
An existing check on keynames was overly eager to reject non-word
letters, but if we ever start using three-level names, the middle
level string can contain almost anything, so fix that as well while
we are in the vicinity.
Signed-off-by: Phil Pennock <phil@apcera.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fixes an XSS vulnerability in gitweb.
* jk/maint-gitweb-xss:
gitweb: escape html in rss title
|
|
The title of an RSS feed is generated from many components,
including the filename provided as a query parameter, but we
failed to quote it. Besides showing the wrong output, this
is a vector for XSS attacks.
Signed-off-by: Jeff King <peff@peff.net>
|
|
When commit 592ea41 refactored the list of extensions for
syntax highlighting, it failed to take into account perl's
operator precedence within lists. As a result, we end up
creating a dictionary of one-to-one elements when the intent
was to map mutliple related types to one main type (e.g.,
bash, ksh, zsh, and sh should all map to sh since they share
similar syntax, but we ended up just mapping "bash" to
"bash" and so forth).
This patch adds parentheses to make the mapping as the
original change intended. It also reorganizes the list to
keep mapped extensions together.
Signed-off-by: Richard Hubbell <richard_hubbe11@lavabit.com>
Signed-off-by: Jeff King <peff@peff.net>
|
|
gitweb's feeds sometimes contained committer timestamps in the wrong timezone
due to a misspelling.
Signed-off-by: Dylan Simon <dylan@dylex.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
brian m. carlson
Ævar Arnfjörð Bjarmason
Junio C Hamano
Guillaume Castagnino
Job Snijders
Hielke Christian Braun
Ville Skyttä
Sven Strickroth
Ian Kelling
Andreas Brauchli
Shin Kojima
Øyvind A. Holm
Jeff King
Roland Mas
Justin Lebar
Andrew Keller
Krzesimir Nowak
Tony Finch
Charles McGarvey
Stefano Lattarini
Andrej E Baranov
Orgad Shaneh
Matthew Daley
Phil Pennock
Richard Hubbell
Dylan Alex Simon