| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add to the lower part of navigation bar (the action specific part)
links allowing to switch between 'inline' (ordinary) diff and
'side by side' style diff.
It is not shown for combined / compact combined diff.
Signed-off-by: Kato Kazuyoshi <kato.kazuyoshi@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use href(-replay->1,...) in (sub)navigation links (like changing style
of view, or going to parent commit) so that extra options are
preserved.
This is needed so clicking on such (sub)navigation link would preserve
style of diff; for example when using "side-by-side" diff style then
going to parent commit would now also use this style.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use separate background colors for pure removal, pure addition and
change for side-by-side diff. This makes reading such diff easier,
allowing to easily distinguish empty lines in diff from vertical
whitespace used to align chunk blocks.
Note that if lines in diff were numbered, the absence of line numbers
[for one side] would help in distinguishing empty lines from vertical
align.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This commits adds to support for showing "side-by-side" style diff.
Currently you have to hand-craft the URL; navigation for selecting
diff style is to be added in the next commit.
The diff output in unified format from "git diff-tree" is reorganized to
side-by-side style chunk by chunk with format_sidebyside_diff_chunk().
This reorganization requires knowledge about diff line classification,
so format_diff_line() was renamed to process_diff_line(), and changed to
return tuple (list) consisting of class of diff line and of
HTML-formatted (but not wrapped in <div class="diff ...">...</div>) diff
line. Wrapping is now done by caller, i.e. git_patchset_body().
Gitweb uses float+margin CSS-based layout for "side by side" diff.
You can specify style of diff with "ds" ('diff_style') query
parameter. Currently supported values are 'inline' and 'sidebyside';
the default is 'inline'.
Another solution would be to use "opt" ('extra_options') for that...
though current use of it in gitweb seems to suggest that "opt" is more
about passing extra options to underlying git commands, and "git diff"
doesn't support '--side-by-side' like GNU diff does, (yet?).
Signed-off-by: Kato Kazuyoshi <kato.kazuyoshi@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor main parts of HTML-formatting for diff chunk headers
(formatting means here adding links and syntax hightlighting) into
separate subroutines:
* format_unidiff_chunk_header for ordinary diff,
* format_cc_diff_chunk_header for combined diff
(more than one parent)
This makes format_diff_line() subroutine easier to follow.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Simplify classification of diff line body in format_diff_line(),
replacing two long if-elsif chains (one for ordinary diff and one for
combined diff of a merge commit) with a single regexp match. Refactor
this code into diff_line_class() function.
While at it:
* Fix an artifact in that $diff_class included leading space to be
able to compose classes like this "class=\"diff$diff_class\"', even
when $diff_class was an empty string. This made code unnecessary
ugly: $diff_class is now just class name or an empty string.
* Introduce "ctx" class for context lines ($diff_class was set to ""
in this case before this commit).
Idea and initial code by Junio C Hamano, polish and testing by Jakub
Narebski. Inspired by patch adding side-by-side diff by Kato Kazuyoshi,
which required $diff_class to be name of class without extra space.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* lh/gitweb-site-html-head:
gitweb: provide a way to customize html headers
|
|
* jm/maint-gitweb-filter-forks-fix:
gitweb: fix regression when filtering out forks
|
|
This fixes a condition in filter_forks_from_projects_list that failed if
process directory was different from project root: in such case, the subroutine
was a no-op and forks were not detected.
Signed-off-by: Julien Muchembled <jm@jmuchemb.eu>
Tested-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows web sites to add some specific html headers to the pages
generated by gitweb.
The new variable $site_html_head_string can be set to an html snippet that
will be inserted at the end of the <head> section of each page generated
by gitweb.
Signed-off-by: Lénaïc Huard <lenaic@lhuard.fr.eu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current code, as is, passes control characters, such as form-feed
(^L) to highlight which then passes it through to the browser. User
agents (web browsers) that support 'application/xhtml+xml' usually
require that web pages declared as XHTML and with this mimetype are
well-formed XML. Unescaped control characters cannot appear within a
contents of a valid XML document.
This will cause the browser to display one of the following warnings:
* Safari v5.1 (6534.50) & Google Chrome v13.0.782.112:
This page contains the following errors:
error on line 657 at column 38: PCDATA invalid Char value 12
Below is a rendering of the page up to the first error.
* Mozilla Firefox 3.6.19 & Mozilla Firefox 5.0:
XML Parsing Error: not well-formed
Location:
http://path/to/git/repo/blah/blah
Both errors were generated by gitweb.perl v1.7.3.4 w/ highlight 2.7
using arch/ia64/kernel/unwind.c from the Linux kernel.
When syntax highlighter is not used, control characters are replaced
by esc_html(), but with syntax highlighter they were passed through to
browser (to_utf8() doesn't remove control characters).
Introduce sanitize() subroutine which strips forbidden characters, but
does not perform HTML escaping, and use it in git_blob() to sanitize
syntax highlighter output for XHTML.
Note that excluding "\t" (U+0009), "\n" (U+000A) and "\r" (U+000D) is
not strictly necessary, atleast for currently the only callsite: "\t"
tabs are replaced by spaces by untabify(), "\n" is stripped from each
line before processing it, and replacing "\r" could be considered
improvement.
Originally-by: Christopher M. Fuhrman <cfuhrman@panix.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/gitweb-config-list-case:
gitweb: Git config keys are case insensitive, make config search too
|
|
* jn/gitweb-system-config:
gitweb: Introduce common system-wide settings for convenience
|
|
Otherwise the highlight filter would work on a corrupt byte sequence.
Signed-off-by: 张忠山 <zzs213@126.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git config -z -l" that gitweb uses in git_parse_project_config() to
populate %config hash returns section and key names of config
variables in lowercase (they are case insensitive). When checking
%config in git_get_project_config() we have to take it into account.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Because of backward compatibility we cannot change gitweb to always
use /etc/gitweb.conf (i.e. even if gitweb_config.perl exists). For
common system-wide settings we therefore need separate configuration
file: /etc/gitweb-common.conf.
Long description:
gitweb currently obtains configuration from the following sources:
1. per-instance configuration file (default: gitweb_conf.perl)
2. system-wide configuration file (default: /etc/gitweb.conf)
If per-instance configuration file exists, then system-wide
configuration is _not used at all_. This is quite untypical and
suprising behavior.
Moreover it is different from way git itself treats /etc/git.conf. It
reads in stuff from /etc/git.conf and then local repos can change or
override things as needed. In fact this is quite beneficial, because
it gives site admins a simple and easy way to give an automatic hint
to a repo about things the admin would like.
On the other hand changing current behavior may lead to the situation,
where something in /etc/gitweb.conf may interfere with unintended
interaction in the local repository. One solution would be to
_require_ to do explicit include; with read_config_file() it is now
easy, as described in gitweb/README (description introduced in this
commit).
But as J.H. noticed we cannot ask people to modify their per-instance
gitweb config file to include system-wide settings, nor we can require
them to do this.
Therefore, as proposed by Junio, for gitweb to have centralized config
elements while retaining backwards compatibility, introduce separate
common system-wide configuration file, by default /etc/gitweb-common.conf
Noticed-by: Drew Northup <drew.northup@maine.edu>
Helped-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Inspired-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/gitweb-search:
gitweb: Make git_search_* subroutines render whole pages
gitweb: Clean up code in git_search_* subroutines
gitweb: Split body of git_search into subroutines
gitweb: Check permissions first in git_search
|
|
* jn/mime-type-with-params:
gitweb: Serve */*+xml 'blob_plain' as text/plain with $prevent_xss
gitweb: Serve text/* 'blob_plain' as text/plain with $prevent_xss
|
|
* jn/gitweb-split-header-html:
gitweb: Refactor git_header_html
|
|
* ln/gitweb-mime-types-split-at-blank:
gitweb: allow space as delimiter in mime.types
|
|
Enhance usability of 'blob_plain' view protection against XSS attacks
(enabled by setting $prevent_xss to true) by serving contents inline
as safe 'text/plain' mimetype where possible, instead of serving with
"Content-Disposition: attachment" to make sure they don't run in
gitweb's security domain.
This patch broadens downgrading to 'text/plain' further, to any
*/*+xml mimetype. This includes:
application/xhtml+xml (*.xhtml, *.xht)
application/atom+xml (*.atom)
application/rss+xml (*.rss)
application/mathml+xm (*.mathml)
application/docbook+xml (*.docbook)
image/svg+xml (*.svg, *.svgz)
Probably most useful is serving XHTML files as text/plain in
'blob_plain' view, directly viewable.
Because file with 'image/svg+xml' mimetype can be compressed SVGZ
file, we have to check if */*+xml really is text file, via '-T $fd'.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One of mechanism enabled by setting $prevent_xss to true is 'blob_plain'
view protection. With XSS prevention on, blobs of all types except a
few known safe ones are served with "Content-Disposition: attachment" to
make sure they don't run in our security domain.
Instead of serving text/* type files, except text/plain (and including
text/html), as attachements, downgrade it to text/plain. This way HTML
pages in 'blob_plain' (raw) view would be displayed in browser, but
safely as a source, and not asked to be saved.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extract the following parts into separate subroutines:
* finding correct MIME content type for HTML pages (text/html or
application/xhtml+xml?) into get_content_type_html()
* printing <link ...> elements in HTML head into print_header_links()
* printing navigation "breadcrumbs" for given action into
print_nav_breadcrumbs()
* printing search form into print_search_form()
This reduces git_header_html to two pages long (53 lines), making gitweb
code easier to read.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move git_header_html() and git_footer_html() invocation from git_search()
to individual git_search_* subroutines.
While at it, reorganize search-related code a bit, moving invoking of git
commands before any output is generated.
This has the following advantages:
* gitweb now shows an error page if there was unknown search type
(evaluate_and_validate_params checks only that it looks sanely);
remember that we shouldn't call die_error after any output.
* git_search_message is now safe agains die_error in parse_commits
(though this is very unlikely).
* gitweb now can check errors while invoking git commands and show
error page (again, quite unlikely).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace sequence of
$foo .= "bar";
$foo .= "baz";
with
$foo .= "bar" .
"baz";
Use href(-replay=>1, -page=>undef) for first page of a multipl-page view.
Wrap some lines to reduce their length. Some lines still have more than 80
characters, but lines are shorter now.
No functional changes intended.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Create separate subroutines for handling each of aspects of searching
the repository:
* git_search_message ('commit', 'author', 'committer')
* git_search_changes ('pickaxe')
* git_search_content_of_files ('grep')
Almost pure code movement (and unindent), which you can check e.g. via
$ git blame -w --date=short -C -C HEAD^..HEAD -- gitweb/gitweb.perl |
grep -C 3 -e '^[^^]' | less -S
No functional changes intended.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Check first if relevant features: 'search', 'pickaxe', 'grep', as
appropriate, are enabled before doing anything else in git_search.
This should make git_search code more clear.
While at it, expand a bit error message (e.g. 'Pickaxe' ->
'Pickaxe search').
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
gitweb: 'pickaxe' and 'grep' features requires 'search' to be enabled
|
|
Both 'pickaxe' (searching changes) and 'grep' (searching files)
require basic 'search' feature to be enabled to work. Enabling
e.g. only 'pickaxe' won't work.
Add a comment about this.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
in openSUSE /etc/mime.types has only spaces. I don't know if there's
a canonical reference that says that only tabs are allowed. Mutt at
least also accepts spaces. So make gitweb more liberal too.
Signed-off-by: Ludwig Nussel <ludwig.nussel@suse.de>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: John 'Warthog9' Hawley <warthog9@eaglescrag.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
v1.7.6-rc0~27^2~4 (gitweb: Change the way "content tags" ('ctags') are
handled, 2011-04-29) tried to make gitweb's tag cloud feature more
intuitive for webmasters by checking whether the ctags/<label> under
a project's .git dir contains a number (representing the strength of
association to <label>) before treating it as one.
With that change, after putting '$feature{'ctags'}{'default'} = [1];'
in your $GITWEB_CONFIG, you could do
echo Linux >.git/ctags/linux
and gitweb would treat that as a request to tag the current repository
with the Linux tag, instead of the previous behavior of writing an
error page embedded in the projects list that triggers error messages
from Chromium and Firefox about malformed XML.
Unfortunately the pattern (\d+) used to match numbers is too loose,
and the "XML declaration allowed only at the start of the document"
error can still be experienced if you write "Linux-2.6" in place of
"Linux" in the example above. Fix it by tightening the pattern to
^\d+$.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/mime-type-with-params:
gitweb: Fix usability of $prevent_xss
|
|
With XSS prevention on (enabled using $prevent_xss), blobs
('blob_plain') of all types except a few known safe ones are served
with "Content-Disposition: attachment". However the check was too
strict; it didn't take into account optional parameter attributes,
media-type = type "/" subtype *( ";" parameter )
as described in RFC 2616
http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.17
http://www.w3.org/Protocols/rfc2616/rfc2616-sec3.html#sec3.7
This fixes that, and it for example treats following as safe MIME
media type:
text/plain; charset=utf-8
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/gitweb-js:
gitweb: Make JavaScript ability to adjust timezones configurable
gitweb.js: Add UI for selecting common timezone to display dates
gitweb: JavaScript ability to adjust time based on timezone
gitweb: Unify the way long timestamp is displayed
gitweb: Refactor generating of long dates into format_timestamp_html
gitweb.js: Provide getElementsByClassName method (if it not exists)
gitweb.js: Introduce code to handle cookies from JavaScript
gitweb.js: Extract and improve datetime handling
gitweb.js: Provide default values for padding in padLeftStr and padLeft
gitweb.js: Update and improve comments in JavaScript files
gitweb: Split JavaScript for maintability, combining on build
|
|
* jn/ctags-more:
gitweb: Optional grouping of projects by category
gitweb: Modularized git_get_project_description to be more generic
gitweb: Split git_project_list_body in two functions
|
|
Beside being obvious reduction of duplicated code, this is enables us
to easily call site-wide config file in per-installation config file.
The actual update to documentation is left for next commit, because of
possible exclusive alternative (possible other next commit) of always
reading system-wide config file and relying on per-instalation config
file overriding system-wide defaults.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Configure JavaScript-based ability to select common timezone for git
dates via %feature mechanism, namely 'javascript-timezone' feature.
The following settings are configurable:
* default timezone (defaults to 'local' i.e. browser timezone);
this also can function as a way to disable this ability,
by setting it to false-ish value (undef or '')
* name of cookie to store user's choice of timezone
* class name to mark dates
NOTE: This is a bit of abuse of %feature system, which can store only
sequence of values, rather than dictionary (hash); usually but not
always only a single value is used.
Based-on-code-by: John 'Warthog9' Hawley <warthog9@eaglescrag.net>
Helped-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This will modify HTML, add CSS rules and add DOM event handlers so
that clicking on any date (the common part, not the localtime part)
will display a drop down menu to choose the timezone to change to.
Currently menu displays only the following timezones:
utc
local
-1200
-1100
...
+1100
+1200
+1300
+1400
In timezone selection menu each timezone is +1hr to the previous. The
code is capable of handling fractional timezones, but those have not
been added to the menu.
All changes are saved to a cookie, so page changes and closing /
reopening browser retains the last known timezone setting used.
[jn: Changed from innerHTML to DOM, moved to event delegation for
onclick to trigger menu, added close button and cookie refreshing]
Helped-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: John 'Warthog9' Hawley <warthog9@eaglescrag.net>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch is based on Kevin Cernekee's <cernekee@gmail.com>
patch series entitled "gitweb: introduce localtime feature". While
Kevin's patch changed the server side output so that the timezone
was output from gitweb itself, this has a number of drawbacks, in
particular with respect to gitweb-caching.
This patch takes the same basic goal, display the appropriate times in
a given common timezone, and implements it in JavaScript. This
requires adding / using a new class, "datetime", to be able to find
elements to be adjusted from JavaScript. Appropriate dates are
wrapped in a span with this class.
Timezone to be used can be retrieved from "gitweb_tz" cookie, though
currently there is no way to set / manipulate this cookie from gitweb;
this is left for later commit.
Valid timezones, currently, are: "utc", "local" (which means that
timezone is taken from browser), and "+/-ZZZZ" numeric timezone as in
RFC-2822. Default timezone is "local" (currently not configurable,
left for later commit).
Fallback (should JavaScript not be enabled) is to treat dates as they
have been and display them, only, in UTC.
Pages affected:
* 'summary' view, "last change" field (commit time from latest change)
* 'log' view, author time
* 'commit' and 'commitdiff' views, author/committer time
* 'tag' view, tagger time
Based-on-code-from: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: John 'Warthog9' Hawley <warthog9@eaglescrag.net>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
format_timestamp_html loses its "-localtime => 1" option, and now
always print the local time (in author/comitter/tagger local
timezone), with "atnight" warning if needed.
This means that both 'summary' and 'log' views now display localtime.
In the case of 'log' view this can be thought as an improvement, as
now one can easily see which commits in a series are made "atnight"
and should be examined closer.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is pure refactoring and doesn't change gitweb output, though this
could potentially affect 'summary', 'log', and 'commit'-like views
('commit', 'commitdiff', 'tag').
Remove print_local_time and format_local_time, as their use is now
replaced (indirectly) by using format_timestamp_html.
While at it improve whitespace formatting.
Inspired-by-code-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/ctags:
gitweb: Mark matched 'ctag' / contents tag (?by_tag=foo)
gitweb: Change the way "content tags" ('ctags') are handled
gitweb: Restructure projects list generation
|
|
Extract filtering out forks (which is done if 'forks' feature is
enabled) into filter_forks_from_projects_list subroutine, and
searching projects (via projects search form, or via content tags)
into search_projects_list subroutine.
Both are now run _before_ displaying projects, and not while printing;
this allow to know upfront if there were any found projects. Gitweb
now can and do print 'No such projects found' if user searches for
phrase which does not correspond to any project (any repository).
This also would allow splitting projects list into pages, if we so
desire.
Filtering out forks and marking repository (project) as having forks
is now consolidated into one subroutine (special case of handling
forks in git_get_projects_list only for $projects_list being file is
now removed). Forks handling is also cleaned up and simplified.
$pr->{'forks'} now contains un-filled list of forks; we can now also
detect situation where the way for having forks is prepared, but there
are no forks yet.
Sorting projects got also refactored in a very straight way (just
moving code) into sort_projects_list subroutine.
The interaction between forks, content tags and searching is now made
more explicit: searching whether by tag, or via search form turns off
fork filtering (gitweb searches also forks, and will show all
results). If 'ctags' feature is disabled, then searching by tag is
too.
The t9500 test now includes some basic test for 'forks' and 'ctags'
features; the t9502 includes test checking if gitweb correctly filters
out forks.
Generating list of projects by scanning given directory is now also a
bit simplified wrt. handling filtering; it is byproduct of extracting
filtering forks to separate subroutine.
While at it we now detect that there are no projects and respond with
"404 No projects found" also for 'project_index' and 'opml' actions.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds the $projects_list_group_categories option which, if enabled,
will result in grouping projects by category on the project list page.
The category is specified for each project by the $GIT_DIR/category file
or the 'gitweb.category' variable in its configuration file. By default,
projects are put in the $project_list_default_category category.
Note:
- Categories are always sorted alphabetically, with projects in
each category sorted according to the globally selected $order.
- When displaying a subset of all the projects (page limiting), the
category headers are only displayed for projects present on the page.
The feature is inspired from Sham Chukoury's patch for the XMMS2
gitweb, but has been rewritten for the current gitweb code. The CSS
for categories is inspired from Gustavo Sverzut Barbieri's patch to
group projects by path.
Thanks to Florian Ragwitz for Perl tips.
[jn: Updated to post restructuring projects list generation, fixed bugs,
added very basic test in t9500 that there are no warnings from Perl.]
Signed-off-by: Sebastien Cevey <seb@cine7.net>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It might have been hard to discover that current view is limited to
projects with given content tag (ctag), as it was distinquished only
in gitweb URL. Mark matched contents tag in the tag cloud using
"match" class, for easier discovery.
This commit introduces a bit of further code duplication in
git_populate_project_tagcloud().
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce a git_get_file_or_project_config utility function to
retrieve a repository variable either from a plain text file in the
$GIT_DIR or else from 'gitweb.$variable' in the repository config
(e.g. 'description').
This would be used in next commit to retrieve category for a project,
which is to be stored in the same way as project description.
Signed-off-by: Sebastien Cevey <seb@cine7.net>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The major change is removing the ability to edit content tags (ctags)
in a web browser.
The interface was created by gitweb, while actual editing of tags was
to be done by external script; the API was not defined, and neither
was provided example implementation. Such split is also a bit fragile
- interface and implementation have to be kept in sync. Gitweb
provided only ability to add tags; you could not edit tags nor delete
them.
Format of ctags is now described in the comment above git_get_project_ctags
subroutine. Gitweb now is more robust with respect to original ctags
format; it also accepts two new formats: $GIT_DIR/ctags file, with one
content tag per line, and multi-value `gitweb.ctag' config variable.
Gathering all ctags of all project is now put in git_gather_all_ctags
subroutine, making git_project_list_body more clear.
git_populate_project_tagcloud subroutine now generates data used for
tag cloud, including generation of ctag link, also in the case
HTML::TagCloud module is unavailable. Links are now generated using
href() subroutine - this is more robust, as ctags might contain '?',
';' and '=' special characters that need to be escaped in query param.
Shown tags are HTML-escaped.
The generation of tag cloud in git_show_project_tagcloud in the case
when HTML::TagCloud is not available is now changed slightly.
The 'content tags' field on project summary page is made more in line
with other fields in "projects_list" table. Because one cannot now
add new tags from web interface, this field is no longer displayed
when there are no content tags for given project.
Ctags-issue-Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Ctags-issue-Reported-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extract the printing of project rows (body/contents of projects list
table) on the 'project_list' page into a separate git_project_list_rows
function. This makes it easier to reuse the code to print different
subsets of the whole project list.
[jn: Updated to post restructuring projects list generation]
Signed-off-by: Sebastien Cevey <seb@cine7.net>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For projects that do not release official archives, gitweb's snapshot
feature would be an excellent alternative, and but without the '-n'
('--no-name') argument, gzip includes a timestamp in output which results
in different files. Because some systems hash/checksum downloaded files
to ensure integrity of the tarball (e.g FreeBSD), it is desirable to
produce tarballs in a reproducible way for that purpose.
Whilst '--no-name' is more descriptive, the long version of the flag is
not supported on all systems. In particular, OpenBSD does not appear to
support it.
Supply '-n' to gzip to exclude timestamp from output and produce idential
output every time.
Signed-off-by: Fraser Tweedale <frase@frase.id.au>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Kato Kazuyoshi
Jakub Narebski
Junio C Hamano
Julien Muchembled
Lénaïc Huard
张忠山
Ludwig Nussel
Jonathan Nieder
John 'Warthog9' Hawley
Sebastien Cevey
Fraser Tweedale