summaryrefslogtreecommitdiff
path: root/git.c
AgeCommit message (Collapse)AuthorFilesLines
2014-02-20rename read_replace_refs to check_replace_refsLibravatar Michael Haggerty1-1/+1
The semantics of this flag was changed in commit e1111cef23 inline lookup_replace_object() calls but wasn't renamed at the time to minimize code churn. Rename it now, and add a comment explaining its use. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-01-17Merge branch 'nd/shallow-clone'Libravatar Junio C Hamano1-1/+1
Fetching from a shallow-cloned repository used to be forbidden, primarily because the codepaths involved were not carefully vetted and we did not bother supporting such usage. This attempts to allow object transfer out of a shallow-cloned repository in a controlled way (i.e. the receiver become a shallow repository with truncated history). * nd/shallow-clone: (31 commits) t5537: fix incorrect expectation in test case 10 shallow: remove unused code send-pack.c: mark a file-local function static git-clone.txt: remove shallow clone limitations prune: clean .git/shallow after pruning objects clone: use git protocol for cloning shallow repo locally send-pack: support pushing from a shallow clone via http receive-pack: support pushing to a shallow clone via http smart-http: support shallow fetch/clone remote-curl: pass ref SHA-1 to fetch-pack as well send-pack: support pushing to a shallow clone receive-pack: allow pushes that update .git/shallow connected.c: add new variant that runs with --shallow-file add GIT_SHALLOW_FILE to propagate --shallow-file to subprocesses receive/send-pack: support pushing from a shallow clone receive-pack: reorder some code in unpack() fetch: add --update-shallow to accept refs that update .git/shallow upload-pack: make sure deepening preserves shallow roots fetch: support fetching from a shallow repository clone: support remote shallow repository ...
2014-01-06builtin/help.c: speed up is_git_command() by checking for builtin commands firstLibravatar Sebastian Schuberth1-115/+127
Since 2dce956 is_git_command() is a bit slow as it does file I/O in the call to list_commands_in_dir(). Avoid the file I/O by adding an early check for the builtin commands. Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-01-06git.c: consistently use the term "builtin" instead of "internal command"Libravatar Sebastian Schuberth1-7/+7
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-10add GIT_SHALLOW_FILE to propagate --shallow-file to subprocessesLibravatar Nguyễn Thái Ngọc Duy1-1/+1
This may be needed when a hook is run after a new shallow pack is received, but .git/shallow is not settled yet. A temporary shallow file to plug all loose ends should be used instead. GIT_SHALLOW_FILE is overriden by --shallow-file. --shallow-file does not work in this case because the hook may spawn many git subprocesses and the launch commands do not have --shallow-file as it's a recent addition. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-05replace {pre,suf}fixcmp() with {starts,ends}_with()Libravatar Christian Couder1-6/+6
Leaving only the function definitions and declarations so that any new topic in flight can still make use of the old functions, replace existing uses of the prefixcmp() and suffixcmp() with new API functions. The change can be recreated by mechanically applying this: $ git grep -l -e prefixcmp -e suffixcmp -- \*.c | grep -v strbuf\\.c | xargs perl -pi -e ' s|!prefixcmp\(|starts_with\(|g; s|prefixcmp\(|!starts_with\(|g; s|!suffixcmp\(|ends_with\(|g; s|suffixcmp\(|!ends_with\(|g; ' on the result of preparatory changes in this series. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-11-12peek-remote: remove deprecated alias of ls-remoteLibravatar John Keeping1-1/+0
This has been deprecated since commit 87194d2 (Deprecate peek-remote, 2007-11-24), included in version 1.5.4. Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-11-12tar-tree: remove deprecated commandLibravatar John Keeping1-1/+0
"git tar-tree" has been a thin wrapper around "git archive" since commit fd88d9c (Remove upload-tar and make git-tar-tree a thin wrapper to git-archive, 2006-09-24), which also made it print a message indicating that git-tar-tree is deprecated. Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-11-12repo-config: remove deprecated alias for "git config"Libravatar John Keeping1-1/+0
The release notes for Git 1.5.4 say that "git repo-config" will be removed in the next feature release. Since Git 2.0 is nearly here, remove it. Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-10-18Merge branch 'sb/repack-in-c'Libravatar Junio C Hamano1-0/+1
Rewrite "git repack" in C. * sb/repack-in-c: repack: improve warnings about failure of renaming and removing files repack: retain the return value of pack-objects repack: rewrite the shell script in C
2013-09-20Merge branch 'nr/git-cd-to-a-directory'Libravatar Junio C Hamano1-1/+12
Just like "make -C <directory>", make "git -C <directory> ..." to go there before doing anything else. * nr/git-cd-to-a-directory: t0056: "git -C" test updates git: run in a directory given with -C option
2013-09-17repack: rewrite the shell script in CLibravatar Stefan Beller1-0/+1
The motivation of this patch is to get closer to a goal of being able to have a core subset of git functionality built in to git. That would mean * people on Windows could get a copy of at least the core parts of Git without having to install a Unix-style shell * people using git in on servers with chrooted environments do not need to worry about standard tools lacking for shell scripts. This patch is meant to be mostly a literal translation of the git-repack script; the intent is that later patches would start using more library facilities, but this patch is meant to be as close to a no-op as possible so it doesn't do that kind of thing. Signed-off-by: Stefan Beller <stefanbeller@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-09-09Merge branch 'jl/submodule-mv'Libravatar Junio C Hamano1-0/+12
"git mv A B" when moving a submodule A does "the right thing", inclusing relocating its working tree and adjusting the paths in the .gitmodules file. * jl/submodule-mv: (53 commits) rm: delete .gitmodules entry of submodules removed from the work tree mv: update the path entry in .gitmodules for moved submodules submodule.c: add .gitmodules staging helper functions mv: move submodules using a gitfile mv: move submodules together with their work trees rm: do not set a variable twice without intermediate reading. t6131 - skip tests if on case-insensitive file system parse_pathspec: accept :(icase)path syntax pathspec: support :(glob) syntax pathspec: make --literal-pathspecs disable pathspec magic pathspec: support :(literal) syntax for noglob pathspec kill limit_pathspec_to_literal() as it's only used by parse_pathspec() parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN parse_pathspec: make sure the prefix part is wildcard-free rename field "raw" to "_raw" in struct pathspec tree-diff: remove the use of pathspec's raw[] in follow-rename codepath remove match_pathspec() in favor of match_pathspec_depth() remove init_pathspec() in favor of parse_pathspec() remove diff_tree_{setup,release}_paths convert common_prefix() to use struct pathspec ...
2013-09-09git: run in a directory given with -C optionLibravatar Nazri Ramliy1-1/+12
This is similar in spirit to "make -C dir ..." and "tar -C dir ...". It takes more keypresses to invoke git command in a different directory without leaving the current directory: 1. (cd ~/foo && git status) git --git-dir=~/foo/.git --work-dir=~/foo status GIT_DIR=~/foo/.git GIT_WORK_TREE=~/foo git status 2. (cd ../..; git grep foo) 3. for d in d1 d2 d3; do (cd $d && git svn rebase); done The methods shown above are acceptable for scripting but are too cumbersome for quick command line invocations. With this new option, the above can be done with fewer keystrokes: 1. git -C ~/foo status 2. git -C ../.. grep foo 3. for d in d1 d2 d3; do git -C $d svn rebase; done A new test script is added to verify the behavior of this option with other path-related options like --git-dir and --work-tree. Signed-off-by: Nazri Ramliy <ayiehere@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-22Merge branch 'es/check-mailmap'Libravatar Junio C Hamano1-0/+1
A new command to allow scripts to query the mailmap information. * es/check-mailmap: t4203: test check-mailmap command invocation builtin: add git-check-mailmap command
2013-07-22Merge branch 'tr/protect-low-3-fds'Libravatar Junio C Hamano1-0/+7
When "git" is spawned in such a way that any of the low 3 file descriptors is closed, our first open() may yield file descriptor 2, and writing error message to it would screw things up in a big way. * tr/protect-low-3-fds: git: ensure 0/1/2 are open in main() daemon/shell: refactor redirection of 0/1/2 from /dev/null
2013-07-17git: ensure 0/1/2 are open in main()Libravatar Thomas Rast1-0/+7
Not having an open FD in the 0--2 range can lead to strange results, for example, a subsequent open() may return 2 (stderr) and then a die() would clobber this file. git-daemon and git-shell already guarded against this, but apparently users also manage to trip over it in other git commands. So we call sanitize_stdfds() during main git startup. Since these FDs are inherited, this covers all use of 'git foo ...', and all internal C commands when called directly. It does not fix shell/perl commands called directly. Signed-off-by: Thomas Rast <trast@inf.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-15parse_pathspec: accept :(icase)path syntaxLibravatar Nguyễn Thái Ngọc Duy1-0/+4
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-15pathspec: support :(glob) syntaxLibravatar Nguyễn Thái Ngọc Duy1-0/+8
:(glob)path differs from plain pathspec that it uses wildmatch with WM_PATHNAME while the other uses fnmatch without FNM_PATHNAME. The difference lies in how '*' (and '**') is processed. With the introduction of :(glob) and :(literal) and their global options --[no]glob-pathspecs, the user can: - make everything literal by default via --noglob-pathspecs --literal-pathspecs cannot be used for this purpose as it disables _all_ pathspec magic. - individually turn on globbing with :(glob) - make everything globbing by default via --glob-pathspecs - individually turn off globbing with :(literal) The implication behind this is, there is no way to gain the default matching behavior (i.e. fnmatch without FNM_PATHNAME). You either get new globbing or literal. The old fnmatch behavior is considered deprecated and discouraged to use. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-13builtin: add git-check-mailmap commandLibravatar Eric Sunshine1-0/+1
Introduce command check-mailmap, similar to check-attr and check-ignore, which allows direct testing of .mailmap configuration. As plumbing accessible to scripts and other porcelain, check-mailmap publishes the stable, well-tested .mailmap functionality employed by built-in Git commands. Consequently, script authors need not re-implement .mailmap functionality manually, thus avoiding potential quirks and behavioral differences. Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-06Merge branch 'nd/clone-connectivity-shortcut'Libravatar Junio C Hamano1-0/+7
Special case "git clone" and use lighter-weight implementation to check the completeness of the history behind refs. * nd/clone-connectivity-shortcut: clone: open a shortcut for connectivity check index-pack: remove dead code (it should never happen) fetch-pack: prepare updated shallow file before fetching the pack clone: let the user know when check_everything_connected is run
2013-05-28fetch-pack: prepare updated shallow file before fetching the packLibravatar Nguyễn Thái Ngọc Duy1-0/+7
index-pack --strict looks up and follows parent commits. If shallow information is not ready by the time index-pack is run, index-pack may be led to non-existent objects. Make fetch-pack save shallow file to disk before invoking index-pack. git learns new global option --shallow-file to pass on the alternate shallow file path. Undocumented (and not even support --shallow-file= syntax) because it's unlikely to be used again elsewhere. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-28sparse: Fix mingw_main() argument number/type errorsLibravatar Ramsay Jones1-1/+2
Sparse issues 68 errors (two errors for each main() function) such as the following: SP git.c git.c:510:5: error: too many arguments for function mingw_main git.c:510:5: error: symbol 'mingw_main' redeclared with different type \ (originally declared at git.c:510) - different argument counts The errors are caused by the 'main' macro used by the MinGW build to provide a replacement main() function. The original main function is effectively renamed to 'mingw_main' and is called from the new main function. The replacement main is used to execute certain actions common to all git programs on MinGW (e.g. ensure the standard I/O streams are in binary mode). In order to suppress the errors, we change the macro to include the parameters in the declaration of the mingw_main function. Unfortunately, this change provokes both sparse and gcc to complain about 9 calls to mingw_main(), such as the following: CC git.o git.c: In function 'main': git.c:510: warning: passing argument 2 of 'mingw_main' from \ incompatible pointer type git.c:510: note: expected 'const char **' but argument is of \ type 'char **' In order to suppress these warnings, since both of the main functions need to be declared with the same prototype, we change the declaration of the 9 main functions, thus: int main(int argc, char **argv) Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-02help: mention -a and -g option, and 'git help <concept>' usage.Libravatar Philip Oakley1-1/+3
Reword the overall help given at the end of "git help -a/-g" to mention how to get help on individual commands and concepts. Signed-off-by: Philip Oakley <philipoakley@iee.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-25Merge branch 'jk/alias-in-bare'Libravatar Junio C Hamano1-0/+1
An aliased command spawned from a bare repository that does not say it is bare with "core.bare = yes" is treated as non-bare by mistake. * jk/alias-in-bare: setup: suppress implicit "." work-tree for bare repos environment: add GIT_PREFIX to local_repo_env cache.h: drop LOCAL_REPO_ENV_SIZE
2013-03-11Merge branch 'maint'Libravatar Junio C Hamano1-2/+2
* maint: git.c: make usage match manual page
2013-03-11git.c: make usage match manual pageLibravatar Kevin Bracey1-2/+2
Reorder option list in command-line usage to match the manual page. Also make it less than 80-characters wide. Signed-off-by: Kevin Bracey <kevin@bracey.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-10Merge branch 'maint'Libravatar Junio C Hamano1-1/+1
* maint: Translate git_more_info_string consistently
2013-03-10Translate git_more_info_string consistentlyLibravatar Kevin Bracey1-1/+1
"git help" translated the "See 'git help <command>' for more information..." message, but "git" didn't. Signed-off-by: Kevin Bracey <kevin@bracey.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-08setup: suppress implicit "." work-tree for bare reposLibravatar Jeff King1-0/+1
If an explicit GIT_DIR is given without a working tree, we implicitly assume that the current working directory should be used as the working tree. E.g.,: GIT_DIR=/some/repo.git git status would compare against the cwd. Unfortunately, we fool this rule for sub-invocations of git by setting GIT_DIR internally ourselves. For example: git init foo cd foo/.git git status ;# fails, as we expect git config alias.st status git status ;# does not fail, but should What happens is that we run setup_git_directory when doing alias lookup (since we need to see the config), set GIT_DIR as a result, and then leave GIT_WORK_TREE blank (because we do not have one). Then when we actually run the status command, we do setup_git_directory again, which sees our explicit GIT_DIR and uses the cwd as an implicit worktree. It's tempting to argue that we should be suppressing that second invocation of setup_git_directory, as it could use the values we already found in memory. However, the problem still exists for sub-processes (e.g., if "git status" were an external command). You can see another example with the "--bare" option, which sets GIT_DIR explicitly. For example: git init foo cd foo/.git git status ;# fails git --bare status ;# does NOT fail We need some way of telling sub-processes "even though GIT_DIR is set, do not use cwd as an implicit working tree". We could do it by putting a special token into GIT_WORK_TREE, but the obvious choice (an empty string) has some portability problems. Instead, we add a new boolean variable, GIT_IMPLICIT_WORK_TREE, which suppresses the use of cwd as a working tree when GIT_DIR is set. We trigger the new variable when we know we are in a bare setting. The variable is left intentionally undocumented, as this is an internal detail (for now, anyway). If somebody comes up with a good alternate use for it, and once we are confident we have shaken any bugs out of it, we can consider promoting it further. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-23Merge branch 'as/check-ignore'Libravatar Junio C Hamano1-0/+1
Add a new command "git check-ignore" for debugging .gitignore files. The variable names may want to get cleaned up but that can be done in-tree. * as/check-ignore: clean.c, ls-files.c: respect encapsulation of exclude_list_groups t0008: avoid brace expansion add git-check-ignore sub-command setup.c: document get_pathspec() add.c: extract new die_if_path_beyond_symlink() for reuse add.c: extract check_path_for_gitlink() from treat_gitlinks() for reuse pathspec.c: rename newly public functions for clarity add.c: move pathspec matchers into new pathspec.c for reuse add.c: remove unused argument from validate_pathspec() dir.c: improve docs for match_pathspec() and match_pathspec_depth() dir.c: provide clear_directory() for reclaiming dir_struct memory dir.c: keep track of where patterns came from dir.c: use a single struct exclude_list per source of excludes Conflicts: builtin/ls-files.c dir.c
2013-01-06add git-check-ignore sub-commandLibravatar Adam Spiers1-0/+1
This works in a similar manner to git-check-attr. Thanks to Jeff King and Junio C Hamano for the idea: http://thread.gmane.org/gmane.comp.version-control.git/108671/focus=108815 Signed-off-by: Adam Spiers <git@adamspiers.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-19add global --literal-pathspecs optionLibravatar Jeff King1-0/+8
Git takes pathspec arguments in many places to limit the scope of an operation. These pathspecs are treated not as literal paths, but as glob patterns that can be fed to fnmatch. When a user is giving a specific pattern, this is a nice feature. However, when programatically providing pathspecs, it can be a nuisance. For example, to find the latest revision which modified "$foo", one can use "git rev-list -- $foo". But if "$foo" contains glob characters (e.g., "f*"), it will erroneously match more entries than desired. The caller needs to quote the characters in $foo, and even then, the results may not be exactly the same as with a literal pathspec. For instance, the depth checks in match_pathspec_depth do not kick in if we match via fnmatch. This patch introduces a global command-line option (i.e., one for "git" itself, not for specific commands) to turn this behavior off. It also has a matching environment variable, which can make it easier if you are a script or porcelain interface that is going to issue many such commands. This option cannot turn off globbing for particular pathspecs. That could eventually be done with a ":(noglob)" magic pathspec prefix. However, that level of granularity is more cumbersome to use for many cases, and doing ":(noglob)" right would mean converting the whole codebase to use "struct pathspec", as the usual "const char **pathspec" cannot represent extra per-item flags. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-29Move setup_diff_pager to libgit.aLibravatar Nguyễn Thái Ngọc Duy1-33/+0
This is used by diff-no-index.c, part of libgit.a while it stays in builtin/diff.c. Move it to diff.c so that we won't get undefined reference if a program that uses libgit.a happens to pull it in. While at it, move check_pager from git.c to pager.c. It makes more sense there and pager.c is also part of libgit.a Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jeff King <peff@peff.net>
2012-06-25add 'git credential' plumbing commandLibravatar Javier Roucher Iglesias1-0/+1
The credential API is in C, and not available to scripting languages. Expose the functionalities of the API by wrapping them into a new plumbing command "git credentials". In other words, replace the internal "test-credential" by an official Git command. Most documentation writen by: Jeff King <peff@peff.net> Signed-off-by: Pavel Volek <Pavel.Volek@ensimag.imag.fr> Signed-off-by: Kim Thuat Nguyen <Kim-Thuat.Nguyen@ensimag.imag.fr> Signed-off-by: Javier Roucher Iglesias <Javier.Roucher-Iglesias@ensimag.imag.fr> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-03move git_version_string into version.cLibravatar Jeff King1-2/+0
The global git_version_string currently lives in git.c, but doesn't have anything to do with the git wrapper. Let's move it into its own file, where it will be more appropriate to build more version-related functions. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-03Merge branch 'nd/columns'Libravatar Junio C Hamano1-0/+1
A couple of commands learn --column option to produce columnar output. By Nguyễn Thái Ngọc Duy (9) and Zbigniew Jędrzejewski-Szmek (1) * nd/columns: tag: add --column column: support piping stdout to external git-column process status: add --column branch: add --column help: reuse print_columns() for help -a column: add dense layout support t9002: work around shells that are unable to set COLUMNS to 1 column: add columnar layout Stop starting pager recursively Add column layout skeleton and git-column
2012-04-27Add column layout skeleton and git-columnLibravatar Nguyễn Thái Ngọc Duy1-0/+1
A column option string consists of many token separated by either a space or a comma. A token belongs to one of three groups: - enabling: always, never and auto - layout mode: currently plain (which does not layout at all) - other future tuning flags git-column can be used to pipe output to from a command that wants column layout, but not to mess with its own output code. Simpler output code can be changed to use column layout code directly. Thanks-to: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-24i18n: help: mark strings for translationLibravatar Nguyễn Thái Ngọc Duy1-1/+1
This patch also marks most common commands' synopsis for translation so that "git help" gives a friendly listing. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-08dashed externals: kill children on exitLibravatar Clemens Buchacher1-1/+1
Several git commands are so-called dashed externals, that is commands executed as a child process of the git wrapper command. If the git wrapper is killed by a signal, the child process will continue to run. This is different from internal commands, which always die with the git wrapper command. Enable the recently introduced cleanup mechanism for child processes in order to make dashed externals act more in line with internal commands. Signed-off-by: Clemens Buchacher <drizzd@aon.at> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-19Merge branch 'ab/enable-i18n'Libravatar Junio C Hamano1-0/+2
* ab/enable-i18n: i18n: add infrastructure for translating Git with gettext Conflicts: Makefile
2011-12-05i18n: add infrastructure for translating Git with gettextLibravatar Ævar Arnfjörð Bjarmason1-0/+2
Change the skeleton implementation of i18n in Git to one that can show localized strings to users for our C, Shell and Perl programs using either GNU libintl or the Solaris gettext implementation. This new internationalization support is enabled by default. If gettext isn't available, or if Git is compiled with NO_GETTEXT=YesPlease, Git falls back on its current behavior of showing interface messages in English. When using the autoconf script we'll auto-detect if the gettext libraries are installed and act appropriately. This change is somewhat large because as well as adding a C, Shell and Perl i18n interface we're adding a lot of tests for them, and for those tests to work we need a skeleton PO file to actually test translations. A minimal Icelandic translation is included for this purpose. Icelandic includes multi-byte characters which makes it easy to test various edge cases, and it's a language I happen to understand. The rest of the commit message goes into detail about various sub-parts of this commit. = Installation Gettext .mo files will be installed and looked for in the standard $(prefix)/share/locale path. GIT_TEXTDOMAINDIR can also be set to override that, but that's only intended to be used to test Git itself. = Perl Perl code that's to be localized should use the new Git::I18n module. It imports a __ function into the caller's package by default. Instead of using the high level Locale::TextDomain interface I've opted to use the low-level (equivalent to the C interface) Locale::Messages module, which Locale::TextDomain itself uses. Locale::TextDomain does a lot of redundant work we don't need, and some of it would potentially introduce bugs. It tries to set the $TEXTDOMAIN based on package of the caller, and has its own hardcoded paths where it'll search for messages. I found it easier just to completely avoid it rather than try to circumvent its behavior. In any case, this is an issue wholly internal Git::I18N. Its guts can be changed later if that's deemed necessary. See <AANLkTilYD_NyIZMyj9dHtVk-ylVBfvyxpCC7982LWnVd@mail.gmail.com> for a further elaboration on this topic. = Shell Shell code that's to be localized should use the git-sh-i18n library. It's basically just a wrapper for the system's gettext.sh. If gettext.sh isn't available we'll fall back on gettext(1) if it's available. The latter is available without the former on Solaris, which has its own non-GNU gettext implementation. We also need to emulate eval_gettext() there. If neither are present we'll use a dumb printf(1) fall-through wrapper. = About libcharset.h and langinfo.h We use libcharset to query the character set of the current locale if it's available. I.e. we'll use it instead of nl_langinfo if HAVE_LIBCHARSET_H is set. The GNU gettext manual recommends using langinfo.h's nl_langinfo(CODESET) to acquire the current character set, but on systems that have libcharset.h's locale_charset() using the latter is either saner, or the only option on those systems. GNU and Solaris have a nl_langinfo(CODESET), FreeBSD can use either, but MinGW and some others need to use libcharset.h's locale_charset() instead. =Credits This patch is based on work by Jeff Epler <jepler@unpythonic.net> who did the initial Makefile / C work, and a lot of comments from the Git mailing list, including Jonathan Nieder, Jakub Narebski, Johannes Sixt, Erik Faye-Lund, Peter Krefting, Junio C Hamano, Thomas Rast and others. [jc: squashed a small Makefile fix from Ramsay] Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-11-21upload-archive: use start_command instead of forkLibravatar Jeff King1-0/+1
The POSIX-function fork is not supported on Windows. Use our start_command API instead, respawning ourselves in a special "writer" mode to follow the alternate code path. Remove the NOT_MINGW-prereq for t5000, as git-archive --remote now works. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-28Merge branch 'jk/pager-with-external-command'Libravatar Junio C Hamano1-0/+2
* jk/pager-with-external-command: support pager.* for external commands
2011-08-19support pager.* for external commandsLibravatar Jeff King1-0/+2
Without this patch, any commands that are not builtin would not respect pager.* config. For example: git config pager.stash false git stash list would still use a pager. With this patch, pager.stash now has an effect. If it is not specified, we will still fall back to pager.log when we invoke "log" from "stash list". Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-17Merge branch 'js/bisect-no-checkout'Libravatar Junio C Hamano1-1/+1
* js/bisect-no-checkout: bisect: add support for bisecting bare repositories bisect: further style nitpicks bisect: replace "; then" with "\n<tab>*then" bisect: cleanup whitespace errors in git-bisect.sh. bisect: add documentation for --no-checkout option. bisect: add tests for the --no-checkout option. bisect: introduce --no-checkout support into porcelain. bisect: introduce support for --no-checkout option. bisect: add tests to document expected behaviour in presence of broken trees. bisect: use && to connect statements that are deferred with eval. bisect: move argument parsing before state modification.
2011-08-17Merge branch 'js/ref-namespaces'Libravatar Junio C Hamano1-2/+16
* js/ref-namespaces: ref namespaces: tests ref namespaces: documentation ref namespaces: Support remote repositories via upload-pack and receive-pack ref namespaces: infrastructure Fix prefix handling in ref iteration functions
2011-08-09bisect: add support for bisecting bare repositoriesLibravatar Jon Seymour1-1/+1
This enhances the support for bisecting history in bare repositories. The "git bisect" command no longer needs to be run inside a repository with a working tree; it defaults to --no-checkout when run in a bare repository. Two tests are included to demonstrate this behaviour. Suggested-by: Junio C Hamano <gitster@pobox.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Jon Seymour <jon.seymour@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-07-06ref namespaces: infrastructureLibravatar Josh Triplett1-2/+16
Add support for dividing the refs of a single repository into multiple namespaces, each of which can have its own branches, tags, and HEAD. Git can expose each namespace as an independent repository to pull from and push to, while sharing the object store, and exposing all the refs to operations such as git-gc. Storing multiple repositories as namespaces of a single repository avoids storing duplicate copies of the same objects, such as when storing multiple branches of the same source. The alternates mechanism provides similar support for avoiding duplicates, but alternates do not prevent duplication between new objects added to the repositories without ongoing maintenance, while namespaces do. To specify a namespace, set the GIT_NAMESPACE environment variable to the namespace. For each ref namespace, git stores the corresponding refs in a directory under refs/namespaces/. For example, GIT_NAMESPACE=foo will store refs under refs/namespaces/foo/. You can also specify namespaces via the --namespace option to git. Note that namespaces which include a / will expand to a hierarchy of namespaces; for example, GIT_NAMESPACE=foo/bar will store refs under refs/namespaces/foo/refs/namespaces/bar/. This makes paths in GIT_NAMESPACE behave hierarchically, so that cloning with GIT_NAMESPACE=foo/bar produces the same result as cloning with GIT_NAMESPACE=foo and cloning from that repo with GIT_NAMESPACE=bar. It also avoids ambiguity with strange namespace paths such as foo/refs/heads/, which could otherwise generate directory/file conflicts within the refs directory. Add the infrastructure for ref namespaces: handle the GIT_NAMESPACE environment variable and --namespace option, and support iterating over refs in a namespace. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Jamey Sharp <jamey@minilop.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-29Merge branch 'da/git-prefix-everywhere' into nextLibravatar Junio C Hamano1-9/+1
* da/git-prefix-everywhere: t/t7503-pre-commit-hook.sh: Add GIT_PREFIX tests git-mergetool--lib: Make vimdiff retain the current directory git: Remove handling for GIT_PREFIX setup: Provide GIT_PREFIX to built-ins