| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
split_cmdline() is currently used for aliases only, but later it can be
useful for other builtins as well. Move it to alias.c for now,
indicating that originally it's for aliases, but we'll have it in libgit
this way.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Attributes can be specified at three different places: the internal
table of default values, the file $GIT_DIR/info/attributes and files
named .gitattributes in the work tree. Since bare repositories don't
have a work tree, git should ignore any .gitattributes files there.
This patch makes git do that, so the only way left for a user to specify
attributes in a bare repository is the file info/attributes (in addition
to changing the defaults and recompiling).
In addition, git-check-attr is now allowed to run without a work tree.
Like any user of the code in attr.c, it ignores the .gitattributes files
when run in a bare repository. It can still read from info/attributes.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git's main usage pages did not show "git help" as a way to get more
information on a specific subcommand. This patch adds an info line after
the list of git commands currently printed by "git", "git help", "git
--help" and "git help --all".
Signed-off-by: Teemu Likonen <tlikonen@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/diff-no-no-index:
git diff --no-index: default to page like other diff frontends
git-diff: allow --no-index semantics a bit more
"git diff": do not ignore index without --no-index
diff-files: do not play --no-index games
tests: do not use implicit "git diff --no-index"
|
|
Being able to say "git diff A B" outside a git repository and getting a
colourful version of "diff -u A B" may be nice, but such a cute hack
should not give bogus results to scripts that want to give two paths,
either or both of which happen to have been removed from the work tree,
to "git diff-files".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Thanks to Johannes Schindelin for various comments and improvements,
including supporting cloning full bundles.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
make git status act similar to git log and git diff by presenting long
output in a pager.
Signed-off-by: Bart Trojanowski <bart@jukie.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
af05d67 (Always set *nongit_ok in setup_git_directory_gently(),
2008-03-25) had a change from the patch originally submitted that resulted
in disabling aliases outside a git repository.
It turns out that some people used "alias.fubar = diff --color-words" in
$HOME/.gitconfig to use non-index diff (or any command that do not need
git repository) outside git repositories, and this change broke them,
so this resurrects the support for such usage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
setup_git_directory_gently() only modified the value of its *nongit_ok
argument if we were not in a git repository. Now it will always set it
to 0 when we are inside a repository.
Also remove now unnecessary initializations in the callers of this
function.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Once upon a time shortlog could be run from a non-git directory
and still do its job. Fix this regression and add a small test
for it.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* db/checkout: (21 commits)
checkout: error out when index is unmerged even with -m
checkout: show progress when checkout takes long time while switching branches
Add merge-subtree back
checkout: updates to tracking report
builtin-checkout.c: Remove unused prefix arguments in switch_branches path
checkout: work from a subdirectory
checkout: tone down the "forked status" diagnostic messages
Clean up reporting differences on branch switch
builtin-checkout.c: fix possible usage segfault
checkout: notice when the switched branch is behind or forked
Build in checkout
Move code to clean up after a branch change to branch.c
Library function to check for unmerged index entries
Use diff -u instead of diff in t7201
Move create_branch into a library file
Build-in merge-recursive
Add "skip_unmerged" option to unpack_trees.
Discard "deleted" cache entries after using them to update the working tree
Send unpack-trees debugging output to stderr
Add flag to make unpack_trees() not print errors.
...
Conflicts:
Makefile
|
|
This converts git_config_alias to the public alias_lookup
function. Because of the nature of our config parser, we
still have to rely on setting static data. However, that
interface is wrapped so that you can just say
value = alias_lookup(key);
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An earlier commit e1b3a2c (Build-in merge-recursive) made the
subtree merge strategy backend unavailable. This resurrects
it.
A new test t6029 currently only tests the strategy is available,
but it should be enhanced to check the real "subtree" case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The only differences in behavior should be:
- git checkout -m with non-trivial merging won't print out
merge-recursive messages (see the change in t7201-co.sh)
- git checkout -- paths... will give a sensible error message if
HEAD is invalid as a commit.
- some intermediate states which were written to disk in the shell
version (in particular, index states) are only kept in memory in
this version, and therefore these can no longer be revealed by
later write operations becoming impossible.
- when we change branches, we discard MERGE_MSG, SQUASH_MSG, and
rr-cache/MERGE_RR, like reset always has.
I'm not 100% sure I got the merge recursive setup exactly right; the
base for a non-trivial merge in the shell code doesn't seem
theoretically justified to me, but I tried to match it anyway, and the
tests all pass this way.
Other than these items, the results should be identical to the shell
version, so far as I can tell.
[jc: squashed lock-file fix from Dscho in]
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
alias.* configuration expects a string value
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes write_tree_from_memory(), which writes the active cache as
a tree and returns the struct tree for it, available to other code. It
also makes available merge_trees(), which does the internal merge of
two trees with a known base, and merge_recursive(), which does the
recursive internal merge of two commits with a list of common
ancestors.
The first two of these will be used by checkout -m, and the third is
presumably useful in general, although the implementation of checkout
-m which entirely matches the behavior of the shell version does not
use it (since it ignores the difference of ancestry between the old
branch and the new branch).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
|
|
* kh/commit: (33 commits)
git-commit --allow-empty
git-commit: Allow to amend a merge commit that does not change the tree
quote_path: fix collapsing of relative paths
Make git status usage say git status instead of git commit
Fix --signoff in builtin-commit differently.
git-commit: clean up die messages
Do not generate full commit log message if it is not going to be used
Remove git-status from list of scripts as it is builtin
Fix off-by-one error when truncating the diff out of the commit message.
builtin-commit.c: export GIT_INDEX_FILE for launch_editor as well.
Add a few more tests for git-commit
builtin-commit: Include the diff in the commit message when verbose.
builtin-commit: fix partial-commit support
Fix add_files_to_cache() to take pathspec, not user specified list of files
Export three helper functions from ls-files
builtin-commit: run commit-msg hook with correct message file
builtin-commit: do not color status output shown in the message template
file_exists(): dangling symlinks do exist
Replace "runstatus" with "status" in the tests
t7501-commit: Add test for git commit <file> with dirty index.
...
|
|
Now that str_buf takes care of all the allocations, there is
no more gain to pass an argument count.
So this patch removes the "count" argument from:
- "sq_quote_argv"
- "trace_argv_printf"
and all the callers.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This program dumps (parts of) a git repository in the format that
fast-import understands.
For clarity's sake, it does not use the 'inline' method of specifying
blobs in the commits, but builds the blobs before building the commits.
Since signed tags' signatures will not necessarily be valid (think
transformations after the export, or excluding revisions, changing
the history), there are 4 modes to handle them: abort (default),
ignore, warn and strip. The latter just turns the tags into
unsigned ones.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/send-pack: (24 commits)
send-pack: cluster ref status reporting
send-pack: fix "everything up-to-date" message
send-pack: tighten remote error reporting
make "find_ref_by_name" a public function
Fix warning about bitfield in struct ref
send-pack: assign remote errors to each ref
send-pack: check ref->status before updating tracking refs
send-pack: track errors for each ref
git-push: add documentation for the newly added --mirror mode
Add tests for git push'es mirror mode
Update the tracking references only if they were succesfully updated on remote
Add a test checking if send-pack updated local tracking branches correctly
git-push: plumb in --mirror mode
Teach send-pack a mirror mode
send-pack: segfault fix on forced push
Reteach builtin-ls-remote to understand remotes
send-pack: require --verbose to show update of tracking refs
receive-pack: don't mention successful updates
more terse push output
Build in ls-remote
...
|
|
* sb/clean:
Teach git clean to use setup_standard_excludes()
git-clean: Fix error message if clean.requireForce is not set.
Make git-clean a builtin
|
|
* js/mingw-fallouts:
fetch-pack: Prepare for a side-band demultiplexer in a thread.
rehabilitate some t5302 tests on 32-bit off_t machines
Allow ETC_GITCONFIG to be a relative path.
Introduce git_etc_gitconfig() that encapsulates access of ETC_GITCONFIG.
Allow a relative builtin template directory.
Close files opened by lock_file() before unlinking.
builtin run_command: do not exit with -1.
Move #include <sys/select.h> and <sys/ioctl.h> to git-compat-util.h.
Use is_absolute_path() in sha1_file.c.
Skip t3902-quoted.sh if the file system does not support funny names.
t5302-pack-index: Skip tests of 64-bit offsets if necessary.
t7501-commit.sh: Not all seds understand option -i
t5300-pack-object.sh: Split the big verify-pack test into smaller parts.
|
|
This makes git commit a builtin and moves git-commit.sh to
contrib/examples. This also removes the git-runstatus
helper, which was mostly just a git-status.sh implementation detail.
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Except that this fixes a longstanding corner case bug by
tightening the way underlying diff-index command is run, it is
functionally equivalent to the scripted version.
Signed-off-by: Thomas Harning Jr <harningt@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This replaces git-clean.sh with builtin-clean.c, and moves
git-clean.sh to the examples.
This also introduces a change in behavior when removing directories
explicitly specified as a path. For example currently:
1. When dir has only untracked files, these two behave differently:
$ git clean -n dir
$ git clean -n dir/
the former says "Would not remove dir/", while the latter would say
"Would remove dir/untracked" for all paths under it, but not the
directory itself.
With -d, the former would stop refusing, however since the user
explicitly asked to remove the directory the -d is no longer required.
2. When there are more parameters:
$ git clean -n dir foo
$ git clean -n dir/ foo
both cases refuse to remove dir/ unless -d is specified. Once again
since both cases requested to remove dir the -d is no longer required.
Thanks to Johannes Schindelin for the conversion to using the
parse-options API.
Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ph/parseopt-sh:
git-quiltimport.sh fix --patches handling
git-am: -i does not take a string parameter.
sh-setup: don't let eval output to be shell-expanded.
git-sh-setup: fix parseopt `eval` string underquoting
Give git-am back the ability to add Signed-off-by lines.
git-rev-parse --parseopt
scripts: Add placeholders for OPTIONS_SPEC
Migrate git-repack.sh to use git-rev-parse --parseopt
Migrate git-quiltimport.sh to use git-rev-parse --parseopt
Migrate git-checkout.sh to use git-rev-parse --parseopt --keep-dashdash
Migrate git-instaweb.sh to use git-rev-parse --parseopt
Migrate git-merge.sh to use git-rev-parse --parseopt
Migrate git-am.sh to use git-rev-parse --parseopt
Migrate git-clone to use git-rev-parse --parseopt
Migrate git-clean.sh to use git-rev-parse --parseopt.
Update git-sh-setup(1) to allow transparent use of git-rev-parse --parseopt
Add a parseopt mode to git-rev-parse to bring parse-options to shell scripts.
|
|
There are shells that do not correctly detect an exit code of -1 as a
failure. We simply truncate the status code to the lower 8 bits.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* db/remote-builtin:
Reteach builtin-ls-remote to understand remotes
Build in ls-remote
Use built-in send-pack.
Build-in send-pack, with an API for other programs to call.
Build-in peek-remote, using transport infrastructure.
Miscellaneous const changes and utilities
Conflicts:
transport.c
|
|
The "parseopt mode" of git-rev-parse does not need to be run
inside a git repository, although the normal mode does.
Most notabily, lack of this fix breaks git-clone script, as
noticed by Nico.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows to do git rm --cached -r directory, instead of
git ls-files -z directory | git update-index --remove -z --stdin.
This can be particularly useful for git-filter-branch users.
Signed-off-by: Mike Hommey <mh@glandium.org>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Create a setup_work_tree() that can be used from any command requiring
a working tree conditionally.
Signed-off-by: Mike Hommey <mh@glandium.org>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This actually replaces peek-remote with ls-remote, since peek-remote
now handles everything. peek-remote remains an a second name for
ls-remote, although its help message now gives the "ls-remote" name.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also marks some more things as const, as needed.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We need to correctly set up $PATH for non-c based git commands.
Since we already do this, we can just use that $PATH and execvp,
instead of looping over the paths with execve.
This patch adds a setup_path() function to exec_cmd.c, which sets
the $PATH order correctly for our search order. execv_git_cmd() is
stripped down to setting up argv and calling execvp(). git.c's
main() only only needs to call setup_path().
Signed-off-by: Scott R Parish <srp@srparish.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Scott R Parish <srp@srparish.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Scott R Parish <srp@srparish.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* db/fetch-pack: (60 commits)
Define compat version of mkdtemp for systems lacking it
Avoid scary errors about tagged trees/blobs during git-fetch
fetch: if not fetching from default remote, ignore default merge
Support 'push --dry-run' for http transport
Support 'push --dry-run' for rsync transport
Fix 'push --all branch...' error handling
Fix compilation when NO_CURL is defined
Added a test for fetching remote tags when there is not tags.
Fix a crash in ls-remote when refspec expands into nothing
Remove duplicate ref matches in fetch
Restore default verbosity for http fetches.
fetch/push: readd rsync support
Introduce remove_dir_recursively()
bundle transport: fix an alloc_ref() call
Allow abbreviations in the first refspec to be merged
Prevent send-pack from segfaulting when a branch doesn't match
Cleanup unnecessary break in remote.c
Cleanup style nit of 'x == NULL' in remote.c
Fix memory leaks when disconnecting transport instances
Ensure builtin-fetch honors {fetch,transfer}.unpackLimit
...
|
|
There is already logic in the git wrapper to deduce the exec_path from
argv[0], when the git wrapper was called with an absolute path. Extend
that logic to handle relative paths as well.
For example, when you call "../../hello/world/git", it will not turn
"../../hello/world" into an absolute path, and use that.
Initial implementation by Scott R Parish.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
There's a number of tricky conflicts between master and
this topic right now due to the rewrite of builtin-push.
Junio must have handled these via rerere; I'd rather not
deal with them again so I'm pre-merging master into the
topic. Besides this topic somehow started to depend on
the strbuf series that was in next, but is now in master.
It no longer compiles on its own without the strbuf API.
* master: (184 commits)
Whip post 1.5.3.4 maintenance series into shape.
Minor usage update in setgitperms.perl
manual: use 'URL' instead of 'url'.
manual: add some markup.
manual: Fix example finding commits referencing given content.
Fix wording in push definition.
Fix some typos, punctuation, missing words, minor markup.
manual: Fix or remove em dashes.
Add a --dry-run option to git-push.
Add a --dry-run option to git-send-pack.
Fix in-place editing functions in convert.c
instaweb: support for Ruby's WEBrick server
instaweb: allow for use of auto-generated scripts
Add 'git-p4 commit' as an alias for 'git-p4 submit'
hg-to-git speedup through selectable repack intervals
git-svn: respect Subversion's [auth] section configuration values
gtksourceview2 support for gitview
fix contrib/hooks/post-receive-email hooks.recipients error message
Support cvs via git-shell
rebase -i: use diff plumbing instead of porcelain
...
Conflicts:
Makefile
builtin-push.c
rsh.c
|
|
* sq_quote_buf is made public, and works on a strbuf.
* sq_quote_argv also works on a strbuf.
* make sq_quote_argv take a "maxlen" argument to check the buffer won't grow
too big.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Thanks to Johannes Schindelin for review and fixes, and Julian
Phillips for the original C translation.
This changes a few small bits of behavior:
branch.<name>.merge is parsed as if it were the lhs of a fetch
refspec, and does not have to exactly match the actual lhs of a
refspec, so long as it is a valid abbreviation for the same ref.
branch.<name>.merge is no longer ignored if the remote is configured
with a branches/* file. Neither behavior is useful, because there can
only be one ref that gets fetched, but this is more consistant.
Also, fetch prints different information to standard out.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This turns the extern functions to be provided by the backend into a
struct of pointers, renames the functions to be more
namespace-friendly, and updates http-fetch to this interface. It
removes the unused include from http-push.c. It makes git-http-fetch a
builtin (with the implementation a separate file, accessible
directly).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This replaces the script "git-reset.sh" with "builtin-reset.c".
A few git commands used in the script are called from the builtin also:
"ls-files" to check for unmerged files, "read-tree" for resetting
the index file in "mixed" and "hard" resets, and "update-index" to
refresh at the end in the "mixed" reset and also for the option that
gets selected paths into the index.
The reset option with paths was implemented by Johannes Schindelin.
Since the option that gets selected paths into the index is not
a "reset" like the others because it does not change the HEAD at all,
now the command is showing a warning when the "--mixed" option
is supplied for that purpose.
The following table shows the behaviour of "git reset" for
the different supported options, where X means "changing"
the HEAD, index or working tree:
reset: --soft --mixed --hard -- <paths>
HEAD X X X -
index - X X X
files - - X -
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"GIT_DIR=some.where git --bare cmd" and worse yet
"git --git-dir=some.where --bare cmd" were very confusing. They
both ignored git-dir specified, and instead made $cwd as GIT_DIR.
This changes --bare not to override existing GIT_DIR.
This has been like this for a long time. Let's hope nobody sane
relied on this insane behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Here is my attempt to fix this with a minimally intrusive patch.
* As "git --bare init" cannot tell if it was called with --bare or
just "GIT_DIR=. git init", I added an explicit assignment of
is_bare_repository_cfg on the codepath for "git --bare".
* GIT_WORK_TREE alone without GIT_DIR does not make any sense,
nor GIT_WORK_TREE with an explicit "git --bare". Catch that
mistake. It might make sense to move this check to "git.c"
side as well, but I tried to shoot for the minimum change for
now.
* Some scripts, especially from the olden days, rely on
traditional GIT_DIR behaviour in "git init". Namely, these
are some notable patterns:
(create a bare repository)
- mkdir some.git && cd some.git && GIT_DIR=. git init
- mkdir some.git && cd some.git && git --bare init
(create a non-bare repository)
- mkdir .git && GIT_DIR=.git git init
- mkdir .git && GIT_DIR=`pwd`/.git git init
This comes with a new test script and also passes the existing
test suite, but there may be cases that are still broken with
the current tip of master and this patch does not yet fix. I'd
appreciate help in straightening this mess out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To keep the change small, this is done by setting GIT_PAGER to "cat".
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Miklos Vajna
René Scharfe
Teemu Likonen
Junio C Hamano
Daniel Barkalow
Bart Trojanowski
SZEDER Gábor
Jonas Fonseca
Johannes Schindelin
Jeff King
Christian Couder
Kristian Høgsberg
Thomas Harning
Shawn Bohrer
Johannes Sixt
Mike Hommey
Scott R Parish
Shawn O. Pearce
Pierre Habouzit
Carlos Rica
Matthieu Moy