| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Regression fix for people with libsvn between 1.6.12 and 1.6.15, on
which we tried to use the non-working platform auth providers.
* jc/svn-auth-providers-unusable-at-1.6.12:
git-svn: platform auth providers are working only on 1.6.15 or newer
|
|
Matthijs Kooijman reports that the cut-off point 082afee (git-svn:
use platform specific auth providers, 2012-04-26) set at 1.6.12 to
use this feature safely was incorrect, and it is 1.6.15 instead:
http://svn.apache.org/repos/asf/subversion/trunk/CHANGES
Version 1.6.15
* improve some swig parameter mapping (r984565, r1035745)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
This patch removes a chunk of code (the Git::SVN::Fetcher consumer of
libsvn's tree delta protocol) from git-svn.perl and documents its
interface so the hurried reader does not have to read that code right
away.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Using names in the Git:: namespace means these cannot conflict with a
hypothetical binding teaching Subversion to interact with git
repositories.
Currently the packages are private to git-svn.perl so the choice of
name isn't likely to make much difference. This change is mainly
meant as preparation for splitting out the packages in question as
modules on the public search path.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
git-svn.perl is very long (around 6500 lines) and although it is
nicely split into modules, some new readers do not even notice --- it
is too distracting to see all this functionality collected in a single
file.
Splitting it into multiple files would make it easier for people
to read individual modules straight through and to experiment with
components separately.
Let's start with Git::SVN::Prompt. For simplicity, we install this as
a module in the standard search path, just like the existing Git and
Git::I18N modules. In the process, add a manpage explaining its
interface and that it is not likely to be useful for other projects to
avoid confusion.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
When git svn rebase is performed after an unpushed merge, the
rebase operation follows both parents and replays both the user's
local commits and those from the merged branch. This is usually
not the intended behavior.
This patch adds support for the --preserve-merges/-p flag which
allows for a better workflow by re-applying merge commits as merges.
[ew: fixed a minor syntax error]
Signed-off-by: Avishay Lavie <avishay.lavie@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
via Eric Wong
* 'master' of git://git.bogomips.org/git-svn:
git-svn: introduce SVN version comparison function
|
|
When using a Perl script on a system where "perl" found on user's $PATH
could be ancient or otherwise broken, we allow builders to specify the
path to a good copy of Perl with $PERL_PATH. The gitweb test forgot to
use that Perl when running its test.
By Jeff King (1) and Zbigniew Jędrzejewski-Szmek (1)
* jk/maint-gitweb-test-use-sane-perl:
Consistently use perl from /usr/bin/ for scripts
t/gitweb-lib: use $PERL_PATH to run gitweb
|
|
With double-digit version components in SVN::Core::VERSION,
a naive string comparison is no longer sufficient and
a numeric comparison is required for correct results.
This fixes a regression introduced in
commit 082afee621aeb2d3746c8ae290af98823f981f34
("git-svn: use platform specific auth providers")
where SVN version "1.6.6" was incorrectly assumed to
be newer than the required "1.6.12" version.
[mk: fix namespace references]
[ew: commit message]
Tested-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While the majority of scripts use '#!/usr/bin/perl', some use
'#!/usr/bin/env perl'. In the end there is no difference, because the
Makefile rewrites "#!.*perl" with "#!$PERL_PATH" in scripted
Porcelains before installing. Nevertheless, the second form can be
misleading, because it suggests that perl found first in $PATH will be
used.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On Linux, this makes authentication using passwords from gnome-keyring
and kwallet work (only the former was tested). On Mac OS X, this allows
using the OS X Keychain.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Now that SIGPIPE is ignored there's no point blocking it.
Signed-off-by: Roman Kagan <rkagan@mail.ru>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
In HTTP with keep-alive it's not uncommon for the client to notice that
the server decided to stop maintaining the current connection only when
sending a new request. This naturally results in -EPIPE and possibly
SIGPIPE.
The subversion library itself makes no provision for SIGPIPE. Some
combinations of the underlying libraries do (typically SIG_IGN-ing it),
some don't.
Presumably for that reason all subversion commands set SIGPIPE to
SIG_IGN early in their main()-s.
So should we.
This, together with the previous patch, fixes the notorious "git-svn
died of signal 13" problem (see e.g.
http://thread.gmane.org/gmane.comp.version-control.git/134936).
Signed-off-by: Roman Kagan <rkagan@mail.ru>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
In order to maintain consistency of the database mapping svn revision
numbers to git commit ids, rev_map_set() defers signal processing until
it's finished with an append transaction.[*]
The conventional way to achieve this is through sigprocmask(), which is
available in perl in the standard POSIX module.
This is implemented by this patch. One important consequence of it is
that the signal handlers won't be unconditionally set to SIG_DFL anymore
upon the first invocation of rev_map_set() as they used to. As a
result, the signals ignored by git-svn parent will remain ignored;
otherwise the behavior remains the same.
This patch paves the way to ignoring SIGPIPE throughout git-svn which
will be done in the followup patch.
[*] Deferring signals is not enough to ensure the database consistency:
the program may die on SIGKILL or power loss, run out of disk space,
etc. However that's a separate issue that this patch doesn't address.
Signed-off-by: Roman Kagan <rkagan@mail.ru>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
open_or_add_dir checks to see if the directory already exists or not.
If it already exists and is not a directory, then we fail. However,
open_or_add_dir did not previously account for the possibility that the
path did exist as a file, but is deleted in the current commit.
In order to prevent this legitimate case from failing, open_or_add_dir
needs to know what files are deleted in the current commit.
Unfortunately that information has to be plumbed through a couple of
layers.
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
If we delete a file and recreate it as a directory in a single commit,
we have to tell the server about the deletion first or else we'll get
"RA layer request failed: Server sent unexpected return value (405
Method Not Allowed) in response to MKCOL request"
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Use numerical form of time zone to replace alphabetic time zone
abbreviation generated by "%Z". "%Z" is not portable and contain
ambiguity for many areas. For example, CST could be "Central
Standard Time" (GMT-0600) and "China Standard Time" (GMT+0800).
Alphabetic time zone abbreviation is meant for human readability,
not for specifying a time zone for machines.
Failed case can be illustrated like this in linux shell:
> echo $TZ
Asia/Taipei
> date +%Z
CST
> env TZ=`date +%Z` date
Mon Dec 19 06:03:04 CST 2011
> date
Mon Dec 19 14:03:04 CST 2011
[ew: fixed bad package reference inside Git::SVN::Log]
Signed-off-by: Wei-Yin Chen (陳威尹) <chen.weiyin@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Change git-svn to use git-rev-list(1) instead of git-log(1) since the
latter is porcelain that'll cause "git svn rebase" to fail completely
if log.abbrevCommit is set to true in the configuration.
Without this patch the code will fail to parse a SHA1, and then just
spew a bunch of "Use of uninitialized value $hash in string eq"
warnings at "if ($c && $c eq $hash) { ..." and never do anything
useful.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Change an invocation of git-rev-list(1) to not use --no-color,
git-rev-list(1) will always ignore that option and the --color option,
so there's no need to pass it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
It's legitimate to update the mergeinfo property without
actually changing any files. This can happen when changes are
backported to a branch, and then that branch is merged back
into mainline. We still want to record the updated mergeinfo
for book-keeping.
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Fixes a problem matching repository URLs, especially those with a '+' in
the URL, such as svn+ssh:// URLs. Parts of the URL were interpreted as
special characters by the regex matching.
Signed-off-by: Ted Percival <ted.percival@quest.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
* pt/mingw-misc-fixes:
t9901: fix line-ending dependency on windows
mingw: ensure sockets are initialized before calling gethostname
mergetools: use the correct tool for Beyond Compare 3 on Windows
t9300: do not run --cat-blob-fd related tests on MinGW
git-svn: On MSYS, escape and quote SVN_SSH also if set by the user
t9001: do not fail only due to CR/LF issues
t1020: disable the pwd test on MinGW
|
|
Implement a new --ignore-refs option which specifies a regex of refs
to ignore while importing svn history.
This is a useful supplement to the --ignore-paths option, as that
option only operates on the contents of branches and tags, not the
branches and tags themselves.
Signed-off-by: Michael Olson <mwolson@gnu.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Allow the user to check the patch set before it is commited to SVN. It is
then possible to accept/discard one patch, accept all, or quit.
This interactive mode is similar with 'git send email' behaviour. However,
'git svn dcommit' returns as soon as one patch is discarded.
Part of the code was taken from git-send-email.perl (see 'ask' function)
Tests several combinations of potential answers to
'git svn dcommit --interactive'. For each of them, test whether patches
were commited to SVN or not.
Thanks-to Eric Wong <normalperson@yhbt.net> for the initial idea.
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Frédéric Heitzmann <frederic.heitzmann@gmail.com>
|
|
While GIT_SSH does not require any escaping / quoting (e.g. for paths
containing spaces), SVN_SSH requires it due to its use in a Perl script.
Previously, SVN_SSH has only been escaped and quoted automatically if it
was unset and thus derived from GIT_SSH. For user convenience, do the
escaping and quoting also for a SVN_SSH set by the user. This way, the
user is able to use the same unescaped and unquoted syntax for GIT_SSH
and SVN_SSH.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A few scripted Porcelain implementations pretend as if the routine to show
their own help messages are triggered upon "git cmd --help", but a command
line parser of "git" will hijack such a request and shows the manpage for
the cmd subcommand.
Leaving the code to handle such input is simply misleading.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow git-svn to populate the svn:mergeinfo property automatically in
a narrow range of circumstances. Specifically, when dcommitting a
revision with multiple parents, all but (potentially) the first of
which have been committed to SVN in the same repository as the target
of the dcommit.
In this case, the merge info is the union of that given by each of the
parents, plus all changes introduced to the first parent by the other
parents.
In all other cases where a revision to be committed has multiple
parents, cause "git svn dcommit" to raise an error rather than
completing the commit and potentially losing history information in
the upstream SVN repository.
This behavior is disabled by default, and can be enabled by setting
the svn.pushmergeinfo config option.
[ew: minor style changes and manpage merge fix]
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Bryan Jacobs <bjacobs@woti.com>
|
|
"svn dcommit --mergeinfo" replaces the svn:mergeinfo property in an
upstream SVN repository with the given text. The svn:mergeinfo
property may contain commits originating on multiple branches,
separated by newlines.
Cause space characters in the mergeinfo to be replaced by newlines,
allowing a user to create history representing multiple branches being
merged into one.
Update the corresponding documentation and add a test for the new
functionality.
Signed-off-by: Bryan Jacobs <bjacobs@woti.com>
Acked-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
The matching step in commit 3235b7053c45a734c1cdf9b117bda68b7ced29c9
did not properly account for users of the "rewriteRoot"
configuration parameter.
ref: <CANWsHyfHtr0EaJtNsDK9UTcmb_AbLg-1jUA-0uWJ-nEeNosb7w@mail.gmail.com>
Suggested-by: H Krishnan <hetchkay@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Adds a --preserve-empty-dirs flag to the clone operation that will detect
empty directories in the remote Subversion repository and create placeholder
files in the corresponding local Git directories. This allows "empty"
directories to exist in the history of a Git repository.
Also adds the --placeholder-file flag to control the name of any placeholder
files created. Default value is ".gitignore".
Signed-off-by: Ray Chen <rchen@cs.umd.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
If the bottom of a mergeinfo range is a commit that maps to a git root
commit, then it doesn't have a parent. In such a case, use git commit
range "$top_commit" rather than "$bottom_commit^..$top_commit".
[ew: line-wrap at 80 columns]
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Add "--" in the "git rev-list" command line so that if there is a bug
and the revisions cannot be found, the error message is a bit less
cryptic.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
* maint:
git-svn: Fix git svn log --show-commit
|
|
git svn log --show-commit had no tests and, consequently, no attention
by the author of
b1b4755 (git-log: put space after commit mark, 2011-03-10)
who kept git svn log working only without --show-commit.
Introduce a test and fix it.
Reported-by: Bernt Hansen <bernt@norang.ca>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mh/git-svn-automkdirs:
git-svn: add an option to skip the creation of empty directories
|
|
Running programs is not cheap!
Signed-off-by: James Y Knight <jknight@itasoftware.com>
Signed-off-by: Alejandro R. Sedeño <asedeno@mit.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Similar to the 'remote.<name>.pushurl' config key for git remotes,
'pushurl' is designed to be used in cases where 'url' points to an SVN
repository via a read-only transport, to provide an alternate
read/write transport. It is assumed that both keys point to the same
repository.
The 'pushurl' key is distinct from the 'commiturl' key in that
'commiturl' is a full svn path while 'pushurl' (like 'url') is a base
path. 'commiturl' takes precendece over 'pushurl' in cases where
either might be used.
The 'pushurl' is used by git-svn's dcommit and branch commands.
Signed-off-by: Alejandro R. Sedeño <asedeno@mit.edu>
Reviewed-by: James Y Knight <jknight@itasoftware.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
"git svn mkdirs" (which creates empty directories in the current
working copy) can be very slow and is often unnecessary. Provide a
config file option "svn-remote.<name>.automkdirs" that prevents empty
directories from being created automatically. (They are still created
if "git svn mkdirs" is invoked explicitly.)
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, commit marks (left, right, boundary, cherry) are output right
before the commit sha1, which makes it difficult to copy sha1s. Sample
output for "git log --oneline --cherry":
=049c269 t6007: test rev-list --cherry
Change this to
= 049c269 t6007: test rev-list --cherry
which matches exactly the current output of "git log --graph".
Leave "git rev-list" output as is (no space) so that they do not break.
Adjust "git-svn" which uses "git log --pretty=raw --boundary".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As a first step towards preserving merges across dcommit, we need a
mechanism to update the svn:mergeinfo property.
[ew: fixed bashism and style issues in test case]
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
* ab/require-perl-5.8:
perl: use "use warnings" instead of -w
perl: bump the required Perl version to 5.8 from 5.6.[21]
|
|
Formalize our dependency on perl 5.8, bumped from 5.6.[12]. We already
used the three-arg form of open() which was introduced in 5.6.1, but
t/t9700/test.pl explicitly depended on 5.6.2.
However git-add--interactive.pl has been failing on the 5.6 line since
it was introduced in v1.5.0-rc0~12^2~2 back in 2006 due to this open
syntax:
sub run_cmd_pipe {
my $fh = undef;
open($fh, '-|', @_) or die;
return <$fh>;
}
Which when executed dies on "Can't use an undefined value as
filehandle reference". Several of our tests also fail on 5.6 (even
more when compiled with NO_PERL_MAKEMAKER=1):
t2016-checkout-patch.sh
t3904-stash-patch.sh
t3701-add-interactive.sh
t7105-reset-patch.sh
t7501-commit.sh
t9700-perl-git.sh
Our code is bitrotting on 5.6 with no-one interested in fixing it, and
pinning us to such an ancient release of Perl is keeping us from using
useful features introduced in the 5.8 release.
The 5.6 series is now over 10 years old, and the 5.6.2 maintenance
release almost 7. 5.8 on the other hand is more than 8 years old.
All the modern Unix-like operating systems have now upgraded to it or
a later version, and 5.8 packages are available for old IRIX, AIX
Solaris and Tru64 systems.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Tor Arntsen <tor@spacetec.no>
Acked-by: Randal L. Schwartz <merlyn@stonehenge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function working_head_info() fails to parse commit hashes if they
are decorated (i.e. log.decorate is true), causing dcommit, rebase, and
other vital git-svn commands to malfunction.
This patch disables decorated log output with --no-decorate.
[ew: wrapped long line]
Signed-off-by: Mathias Lafeldt <misfire@debugon.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
The merge-base between @$parents and $merge_tip may have been reached
through a merge commit. This means that some commits that are ancestors
of @$parents will not be ancestors of $merge_base. The mergeinfo
property will not list commits that are ancestors of @$parents, so we
need to explicitly exclude them.
[ew: squashed and cleaned up test case from Steven]
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Currently git-svn assumes that two tags created from the same
revision will have the same repo url, so it uses a ref to the
tag without checking that its url matches the current url.
This causes issues when fetching an svn repo where a tag was
created, deleted, and then recreated under the following
circumstances:
- Both tags were copied from the same revision.
- Both tags had the same name.
- Both tags had different repository paths.
- [Optional] Both tags have a file with the same name but
different content.
When all four conditions are met, a checksum mismatch error
occurs because the content of two files with the same path
differs (see t/t9155--git-svn-fetch-deleted-tag.sh):
Checksum mismatch: ChangeLog 065854....
expected: ce771b....
got: 9563fd....
When only the first three conditions are met, no error occurs
but the tag in git matches the first (deleted) tag instead of
the last (most recent) tag (see
t/t9156-git-svn-fetch-deleted-tag-2.sh).
The fix is to verify that the repo url for the ref matches the
current url. If the urls do not match, then a "tail" is grown
on the tag name by appending a dash and rechecking the new ref's
repo url until either a matching repo url is found or a new tag
is created.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Fix a regular expression used to remove the revision from the
end of an svn tag or branch name. The regex did not account for
any "tail" (dashes) that may have been added to the end of the
tag name (which first appeared in v1.4.1-rc2~11). If not fixed,
tags with names like "tags/mytag@5--@2" may be created.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
This change allows git-svn to handle an URL with colons in the path
[ew: rewritten to use uri_decode() function]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
The dcommit command fails if an otherwise unmodified file has
been touched in the working directory:
Cannot dcommit with a dirty index. Commit your changes
first, or stash them with `git stash'.
This happens because "git diff-index" reports a difference
between the index and the filesystem:
:100644 100644 d00491...... 000000...... M file
The fix is to run "git update-index --refresh" before
"git diff-index" as is done in git-rebase and
git-rebase--interactive before "git diff-files".
This changes dcommit to display a list of modified files before
exiting.
Also add a similar test case for "git svn rebase".
[ew: rearranged commit message subject]
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Introduce a new option 'svn.pathnameencoding' that instructs git svn to
recode pathnames to a given encoding. It can be used by windows users
and by those who work in non-utf8 locales to avoid corrupted file names
with non-ascii characters.
[rp: renamed the option and added manpage documentation]
Signed-off-by: Dmitry Statyvka <dstatyvka@tmsoft-ltd.kiev.ua>
Signed-off-by: Robert Pollak <robert.pollak@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Apparently using the Storable module during global destruction is
unsafe - there is a bug which can cause segmentation faults:
http://rt.cpan.org/Public/Bug/Display.html?id=36087
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=482355
The persistent memoization support introduced in commit 8bff7c538
relied on global destruction to write cached data, which was leading
to segfaults in some Perl configurations. Calling Memoize::unmemoize
in the END block forces the cache writeout to be performed earlier,
thus avoiding the bug.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
Junio C Hamano
Jonathan Nieder
Avishay Lavie
Zbigniew Jędrzejewski-Szmek
Matthijs Kooijman
Roman Kagan
Steven Walter
Steven Walter
Wei-Yin Chen (陳威尹)
Ævar Arnfjörð Bjarmason
Ted Percival
Michael Olson
Frédéric Heitzmann
Sebastian Schuberth
Clemens Buchacher
Bryan Jacobs
Eric Wong
Ray Chen
Michael Haggerty
Michael J Gruber
James Y Knight
Alejandro R. Sedeño
Mathias Lafeldt
Steven Walter
David D. Kilzer
Dmitry Statyvka
Sergey Vlasov