| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* jl/submodule-add-relurl-wo-upstream:
submodule add: clean up duplicated code
submodule add: allow relative repository path even when no url is set
submodule add: test failure when url is not configured in superproject
Conflicts:
git-submodule.sh
|
|
* jc/submodule-sync-no-auto-vivify:
submodule add: always initialize .git/config entry
submodule sync: do not auto-vivify uninteresting submodule
Conflicts:
git-submodule.sh
|
|
* bc/submodule-foreach-stdin-fix-1.7.4:
git-submodule.sh: preserve stdin for the command spawned by foreach
t/t7407: demonstrate that the command called by 'submodule foreach' loses stdin
Conflicts:
git-submodule.sh
|
|
* fg/submodule-keep-updating:
git-submodule.sh: clarify the "should we die now" logic
submodule update: continue when a checkout fails
git-sh-setup: add die_with_status
Conflicts:
git-submodule.sh
|
|
The user-supplied command spawned by 'submodule foreach' loses its
connection to the original standard input. Instead, it is connected to the
output of a pipe within the git-submodule script. The user-supplied
command supplied to 'submodule foreach' is spawned within a while loop
which is being piped into. Due to the way shells implement piping output
to a while loop, a subshell is created with its standard input attached to
the output of the pipe. This results in all of the commands executed
within the while loop to have their stdins modified in the same way,
including the user-supplied command.
This can cause a problem if the command requires reading from stdin or if
it changes its behavior based on whether stdin is a tty or not. For
example, this problem was noticed when trying to execute the following:
git submodule foreach git shortlog --since=two.weeks.ago
which printed a message about entering the first submodule and produced no
further output and exited with a status of zero. In this case, shortlog
detected that it was not connected to a tty, and since no revision was
supplied as an argument, it attempted to read the list of revisions from
standard input. Instead, it slurped up the list of submodules that was
being piped to the enclosing while loop and caused that loop to end early
without processing the remaining submodules.
Work around this behavior by saving the original standard input file
descriptor before the while loop, and restoring it when spawning the
user-supplied command.
This fixes the tests in t7407.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ab/i18n-scripts: (48 commits)
i18n: git-bisect bisect_next_check "You need to" message
i18n: git-bisect [Y/n] messages
i18n: git-bisect bisect_replay + $1 messages
i18n: git-bisect bisect_reset + $1 messages
i18n: git-bisect bisect_run + $@ messages
i18n: git-bisect die + eval_gettext messages
i18n: git-bisect die + gettext messages
i18n: git-bisect echo + eval_gettext message
i18n: git-bisect echo + gettext messages
i18n: git-bisect gettext + echo message
i18n: git-bisect add git-sh-i18n
i18n: git-stash drop_stash say/die messages
i18n: git-stash "unknown option" message
i18n: git-stash die + eval_gettext $1 messages
i18n: git-stash die + eval_gettext $* messages
i18n: git-stash die + eval_gettext messages
i18n: git-stash die + gettext messages
i18n: git-stash say + gettext messages
i18n: git-stash echo + gettext message
i18n: git-stash add git-sh-i18n
...
|
|
When "git submodule add $path" is run to add a subdirectory $path to the
superproject, and $path is already the top of the working tree of the
submodule repository, the command created submodule.$path.url entry in the
configuration file in the superproject. However, when adding a repository
$URL that is outside the respository of the superproject to $path that
does not exist (yet) with "git submodule add $URL $path", the command
forgot to set it up.
The user is expressing the interest in the submodule and wants to keep a
checkout, the "submodule add" command should consistently set up the
submodule.$path.url entry in either case.
As a result "git submodule init" can't simply skip the initialization of
those submodules for which it finds an url entry in the git./config
anymore. That lead to problems when adding a submodule (which now sets the
url), add the "update" setting to .gitmodules and expect init to copy that
into .git/config like it is done in t7406. So change init to only then
copy the "url" and "update" entries when they don't exist yet in the
.git/config and do nothing otherwise.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Earlier 33f072f (submodule sync: Update "submodule.<name>.url" for empty
directories, 2010-10-08) attempted to fix a bug where "git submodule sync"
command does not update the URL if the current superproject does not have
a checkout of the submodule.
However, it did so by unconditionally registering submodule.$name.url to
every submodule in the project, even the ones that the user has never
showed interest in at all by running 'git submodule init' command. This
caused subsequent 'git submodule update' to start cloning/updating submodules
that are not interesting to the user at all.
Update the code so that the URL is updated from the .gitmodules file only
for submodules that already have submodule.$name.url entries, i.e. the
ones the user has showed interested in having a checkout.
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Earlier the decision to stop or continue was made on the $action variable
that was set by inspecting $update_module variable. The former is a
redundant variable and will be removed in another topic.
Decide upon inspecting $update_module if a failure should cascade up to
cause us immediately stop, and use a variable that means just that, to
clarify the logic.
Incidentally this also makes the merge with the other topic slightly
easier and cleaner to understand.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git submodule update" stops at the first error and gives control
back to the user. Only after the user fixes the problematic
submodule and runs "git submodule update" again, the second error
is found. And the user needs to repeat until all the problems are
found and fixed one by one. This is tedious.
Instead, the command can remember which submodules it had trouble with,
continue updating the ones it can, and report which ones had errors at
the end. The user can run "git submodule update", find all the ones that
need minor fixing (e.g. working tree was dirty) to fix them in a single
pass. Then another "git submodule update" can be run to update all.
Note that the problematic submodules are skipped only when they are to
be integrated with a safer value of submodule.<name>.update option,
namely "checkout". Fixing a failure in a submodule that uses "rebase" or
"merge" may need an involved conflict resolution by the user, and
leaving too many submodules in states that need resolution would not
reduce the mental burden on the user.
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Mentored-by: Jens Lehmann <Jens.Lehmann@web.de>
Mentored-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In cmd_add() the switch statement used to resolve a relative url was
present twice. Remove the second one and use the realrepo variable set
by the first one (lines 194 ff.) instead.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adding a submodule with a relative repository path did only succeed when
the superproject's default remote was set. But when that is unset, the
superproject is its own authoritative upstream, so lets use its working
directory as upstream instead.
This allows users to set up a new superpoject where the submodules urls
are configured relative to the superproject's upstream while its default
remote can be configured later.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
git-submodule.sh: separate parens by a space to avoid confusing some shells
Documentation/technical/api-diff.txt: correct name of diff_unmerge()
read_gitfile_gently: use ssize_t to hold read result
remove tests of always-false condition
rerere.c: diagnose a corrupt MERGE_RR when hitting EOF between TAB and '\0'
|
|
Some shells interpret '(( ))' according to the rules for arithmetic
expansion. This may not follow POSIX, but is prevalent in commonly used
shells. Bash does not have a problem with this particular instance of
'((', likely because it is not followed by a '))', but the public domain
ksh does, and so does ksh on IRIX 6.5.
So, add a space between the parenthesis to avoid confusing these shells.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Gettextize the words "blob" and "submodule", which will be
interpolated in a message emitted by git-submodule. This is
explicitly tested for so we need to skip a portion of a test with
test_i18ncmp.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Gettextize the "Submodule path '$path' not initialized" message. This
is explicitly tested for so we need to skip a portion of a test with
test_i18grep.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Gettextize the "The following path is ignored" message. This is
explicitly tested for so we need to skip a portion of a test with
test_i18ncmp.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Gettextize the "Entering [...]" message. This is explicitly tested for
so we need to skip a portion of a test with test_i18ncmp.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Gettextize warning messages stored in the $errmsg variable using
eval_gettext interpolation. This is explicitly tested for so we
need to skip a portion of a test with test_i18ncmp.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Gettextize the "Submodules changed but not updated" and "Submodule
changes to be committed" messages. This is explicitly tested for so we
need to skip a portion of a test with test_i18ncmp.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Gettextize the "--cached cannot be used with --files" message. Since
this message starts with "--" we have to pass "--" as the first
argument. This works with both GNU gettext 0.18.1 (as expected), and
the gettext(1) on Solaris 10.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Gettextize $update_module say and die messages. These messages needed
to be split up to make them translatable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* nm/submodule-update-force:
submodule: Add --force option for git submodule update
Conflicts:
t/t7406-submodule-update.sh
|
|
* jl/submodule-fetch-on-demand:
fetch/pull: Describe --recurse-submodule restrictions in the BUGS section
submodule update: Don't fetch when the submodule commit is already present
fetch/pull: Don't recurse into a submodule when commits are already present
Submodules: Add 'on-demand' value for the 'fetchRecurseSubmodule' option
config: teach the fetch.recurseSubmodules option the 'on-demand' value
fetch/pull: Add the 'on-demand' value to the --recurse-submodules option
fetch/pull: recurse into submodules when necessary
Conflicts:
builtin/fetch.c
submodule.c
|
|
By default git submodule update runs a simple checkout on submodules that
are not up-to-date. If the submodules contains modified or untracked
files, the command may exit sanely with an error:
$ git submodule update
error: Your local changes to the following files would be overwritten by
checkout:
file
Please, commit your changes or stash them before you can switch branches.
Aborting
Unable to checkout '1b69c6e55606b48d3284a3a9efe4b58bfb7e8c9e' in
submodule path 'test1'
In order to reset a whole git submodule tree, a user has to run first 'git
submodule foreach --recursive git checkout -f' and then run 'git submodule
update'.
This patch adds a --force option for the update command (only used for
submodules without --rebase or --merge options). It passes the --force
option to git checkout which will throw away the local changes.
Signed-off-by: Nicolas Morey-Chaisemartin <nmorey@kalray.eu>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
During a merge module_list returns conflicting submodules several times
(stage 1,2,3) which caused the submodules to be used multiple times in
git submodule init, sync, update and status command.
There are 5 callers of module_list; they all read (mode, sha1, stage,
path) tuple, and most of them care only about path. As a first level
approximation, it should be Ok (in the sense that it does not make things
worse than it currently is) to filter the duplicate paths from module_list
output, but some callers should change their behaviour when the merge in
the superproject still has conflicts.
Notice the higher-stage entries, and emit only one record from
module_list, but while doing so, mark the entry with "U" (not [0-3]) in
the $stage field and null out the SHA-1 part, as the object name for the
lowest stage does not give any useful information to the caller, and this
way any caller that uses the object name would hopefully barf. Then
update the codepaths for each subcommands this way:
- "update" should not touch the submodule repository, because we do not
know what commit should be checked out yet.
- "status" reports the conflicting submodules as 'U000...000' and does
not recurse into them (we might later want to make it recurse).
- The command called by "foreach" may want to do whatever it wants to do
by noticing the merged status in the superproject itself, so feed the
path to it from module_list as before, but only once per submodule.
- "init" and "sync" are unlikely things to do while the superproject is
still not merged, but as long as a submodule is there in $path, there
is no point skipping it. It might however want to take the merged
status of .gitmodules into account, but that is outside of the scope of
this topic.
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Thanks-to: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nicolas Morey-Chaisemartin <nicolas@morey-chaisemartin.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the commit to be checked out on "git submodule update" has already been
fetched in the submodule there is no need to run "git fetch" again. Since
"git fetch" recently learned recursion (and the new on-demand mode to
fetch commits recorded in the superproject is enabled by default) this
will happen pretty often, thereby making the unconditional fetch during
"git submodule update" unnecessary.
If the commit is not present in the submodule (e.g. the user disabled the
fetch on-demand mode) the fetch will be run as before.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git submodule update" can be run with either the "--merge" or "--rebase"
option, or submodule.<name>.update configuration variable can be set to
"merge" or "rebase, to cause local work to get integrated when updating
the submodule.
When a submodule is newly cloned, however, it does not have a check out
when a rebase or merge is attempted, leading to a failure. For newly
cloned submodules, simply check out the appropriate revision. There is no
local work to integrate with for them.
Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* tr/submodule-relative-scp-url:
submodule: fix relative url parsing for scp-style origin
|
|
The function resolve_relative_url was not prepared to deal with an
scp-style origin 'user@host:path' in the case where 'path' is only a
single component. Fix this by extending the logic that strips one
path component from the $remoteurl.
Also add tests for both styles of URLs.
Noticed-by: Jeffrey Phillips Freeman <jeffrey.freeman@syncleus.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/submodule-b-current:
git submodule: Remove now obsolete tests before cloning a repo
git submodule -b ... of current HEAD fails
|
|
Since 55892d23 "git clone" itself checks that the destination path is not
a file but an empty directory if it exists, so there is no need anymore
for module_clone() to check that too.
Two tests have been added to test the behavior of "git submodule add" when
path is a file or a directory (A subshell had to be added to the former
last test to stay in the right directory).
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git submodule add -b $branch $repository
fails when HEAD already points to $branch in $repository.
Reported-by: Klaus Ethgen <Klaus@Ethgen.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* kb/maint-submodule-savearg:
submodule: only preserve flags across recursive status/update invocations
submodule: preserve all arguments exactly when recursing
|
|
Recursive invocations of submodule update/status preserve all arguments,
so executing
git submodule update --recursive -- foo
attempts to recursively update a submodule named "foo".
Naturally, this fails as one cannot have an infinitely-deep stack of
submodules each containing a submodule named "foo". The desired behavior
is instead to update foo and then recursively update all submodules
inside of foo.
This commit accomplishes that by only saving the flags for use in the
recursive invocation.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Shell variables only hold strings, not lists of parameters,
so $orig_args after
orig_args="$@"
fails to remember where each parameter starts and ends, if
some include whitespace. So
git submodule update \
--reference='/var/lib/common objects.git' \
--recursive --init
becomes
git submodule update --reference=/var/lib/common \
objects.git --recursive --init
in the inner repositories. Use "git rev-parse --sq-quote" to
save parameters in quoted form ready for evaluation by the
shell, avoiding this problem.
Helped-By: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a submodule directory has not been filled by "git submodule update"
yet, then "git submodule sync" must still update the super-project's
configuration for submodule.<name>.url.
This situation occurs when switching between branches with a module from
different urls and other branches without the submodule.
Signed-off-by: Andreas Köhler <andi5.py@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git submodule sync" synchronizes the repository URLs
it only updates submodules' .git/config. However, the old
URLs still exist in the super-project's .git/config.
Update the super-project's configuration so that commands
such as "git submodule update" use the URLs from .gitmodules.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To make the behavior of "git submodule add" more consistent with "git add"
ignored submodule paths should not be silently added when they match an
entry in a .gitignore file. To be able to override that default behavior
in the same way as we can do that for "git add", the new option "--force"
is introduced.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change `git submodule add' to add the new submodule <path> with `git
add --force'.
I keep my /etc in .git with a .gitignore that contains just
"*". I.e. `git status' will ignore everything that isn't in the tree
already. When I do:
git submodule add <url> hlagh
git-submodule will get as far as checking out the remote repository
into hlagh, but it'll die right afterwards when it fails to add the
new path:
The following paths are ignored by one of your .gitignore files:
hlagh
Use -f if you really want to add them.
fatal: no files added
Failed to add submodule 'hlagh'
Currently there's no way to add a submodule in this situation other
than to remove the ignored path from the .gitignore while I'm at it.
That's silly, when you run `git submodule add' you're explicitly
saying that you want to add something *new* to the repository. Instead
it should just add the path with `git add --force'.
Initially I implemented this by adding new -f and --force options to
`git submodule add'. But if the --force option isn't supplied it'll
get as far as cloning `hlagh', but won't add it.
So the first thing the user has to do is to remove `hlagh' and then
try again with the --force option.
That sucks, it should just add the path to begin with. I can't think
of any usecase where you've gone through the trouble of typing out
`git submodule add ..', but wish to be overriden by a `gitignore'. The
submodule semantics should be more like `git init', not `git add'.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jl/status-ignore-submodules:
Add the option "--ignore-submodules" to "git status"
git submodule: ignore dirty submodules for summary and status
Conflicts:
builtin/commit.c
t/t7508-status.sh
wt-status.c
wt-status.h
|
|
The summary and status commands only care about submodule commits, so it is
rather pointless that they check for dirty work trees. This saves the time
needed to scan the submodules work tree. Even "git status" profits from these
savings when the status.submodulesummary config option is set, as this lead to
traversing the submodule work trees twice, once for status and once again for
the submodule summary. And if the submodule was just dirty, submodule summary
produced rather meaningless output anyway:
* sub 1234567...1234567 (0):
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a $toplevel variable accessible to `git submodule foreach`, it
contains the absolute path of the top level directory (where
.gitmodules is).
This makes it possible to e.g. read data in .gitmodules from within
foreach commands. I'm using this to configure the branch names I want
to track for each submodule:
git submodule foreach 'git checkout $(git config --file $toplevel/.gitmodules submodule.$name.branch) && git pull'
For a little history: This patch is borne out of my continuing fight
of trying to have Git track the branches of submodules, not just their
commits.
Obviously that's not how they work (they only track commits), but I'm
just interested in being able to do:
git submodule foreach 'git pull'
Of course that won't work because the submodule is in a disconnected
head, so I first have to connect it, but connect it *to what*.
For a while I was happy with this because as fate had it, it just so
happened to do what I meant:
git submodule foreach 'git checkout $(git describe --all --always) && git pull'
But then that broke down, if there's a tag and a branch the tag will
win out, and I can't git pull a branch:
$ git branch -a
* master
remotes/origin/HEAD -> origin/master
remotes/origin/master
$ git tag -l
release-0.0.6
$ git describe --always --all
release-0.0.6
So I figured that I might as well start tracking the branches I want
in .gitmodules itself:
[submodule "yaml-mode"]
path = yaml-mode
url = git://github.com/yoshiki/yaml-mode.git
branch = master
So now I can just do (as stated above):
git submodule foreach 'git checkout $(git config --file $toplevel/.gitmodules submodule.$name.branch) && git pull'
Maybe there's a less painful way to do *that* (I'd love to hear about
it). But regardless of that I think it's a good idea to be able to
know what the top-level is from git submodule foreach.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sd/log-decorate:
log.decorate: only ignore it under "log --pretty=raw"
script with rev-list instead of log
log --pretty/--oneline: ignore log.decorate
log.decorate: usability fixes
Add `log.decorate' configuration variable.
git_config_maybe_bool()
Conflicts:
builtin/log.c
|
|
* maint:
index-pack: fix trivial typo in usage string
git-submodule.sh: properly initialize shell variables
|
|
git-submodule inherits variables from the environment it is started in,
expects the internal variables init= and recursive= to have an empty
value, but doesn't initialize them appropriately. Thanks to the
selftests, this can be reproduced through
init=1 make test
recursive=1 make test
With this commit the variables are initialized, and the selftests
succeed even if these variables have some values in the environment.
The bug was discovered through the Debian autobuilders
http://bugs.debian.org/569594
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Brandon Casey
Jens Lehmann
Fredrik Gustafsson
Ævar Arnfjörð Bjarmason
Nicolas Morey-Chaisemartin
Nicolas Morey-Chaisemartin
Spencer E. Olson
Thomas Rast
Jonathan Nieder
Kevin Ballard
Andreas Köhler
David Aguilar
Gerrit Pape