summaryrefslogtreecommitdiff
path: root/git-stash.sh
AgeCommit message (Collapse)AuthorFilesLines
2008-12-07Revert "git-stash: use git rev-parse -q"Libravatar Junio C Hamano1-6/+6
This reverts commit 757c7f60a78004fc3d0ea62f44320d54ef430c10 as an unnecessary error message to pop up when the last stash entry is dropped. It simply is not worth the aggravation.
2008-12-02git-stash: use git rev-parse -qLibravatar Miklos Vajna1-6/+6
Don't redirect stderr to /dev/null, use -q to suppress the output on stderr. Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-10-09git-stash.sh: fix flawed fix of invalid ref handling (commit da65e7c1)Libravatar Brandon Casey1-18/+4
The referenced commit tried to fix a flaw in stash's handling of a user supplied invalid ref. i.e. 'git stash apply fake_ref@{0}' should fail instead of applying stash@{0}. But, it did so in a naive way by avoiding the use of the --default option of rev-parse, and instead manually supplied the default revision if the user supplied an empty command line. This prevented a common usage scenario of supplying flags on the stash command line (i.e. non-empty command line) which would be parsed by lower level git commands, without supplying a specific revision. This should fall back to the default revision, but now it causes an error. e.g. 'git stash show -p' The correct fix is to use the --verify option of rev-parse, which fails properly if an invalid ref is supplied, and still allows falling back to a default ref when one is not supplied. Convert stash-drop to use --verify while we're at it, since specifying multiple revisions for any of these commands is also an error and --verify makes it so. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-09-29Clarify how the user can satisfy stash's 'dirty state' check.Libravatar Stephen Haberman1-1/+1
Signed-off-by: Stephen Haberman <stephen@exigencecorp.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-09-24git-stash.sh: don't default to refs/stash if invalid ref suppliedLibravatar Brandon Casey1-2/+15
apply_stash() and show_stash() each call rev-parse with '--default refs/stash' as an argument. This option causes rev-parse to operate on refs/stash if it is not able to successfully operate on any element of the command line. This includes failure to supply a "valid" revision. This has the effect of causing 'stash apply' and 'stash show' to operate as if stash@{0} had been supplied when an invalid revision is supplied. e.g. 'git stash apply stash@{1}' would fall back to 'git stash apply stash@{0}' This patch modifies these two functions so that they avoid using the --default option of rev-parse. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-09-06stash: refresh the index before deciding if the work tree is dirtyLibravatar Junio C Hamano1-0/+3
Unlike the case where the user does have a real change in the work tree, refusing to work because of unclean stat information is not very helpful. Signed-off-by: Junio C Hamano <gitster@pobox.com> Acked-by: Nanako Shiraishi <nanako3@lavabit.com>
2008-08-16git-stash: improve synopsis in help and manual pageLibravatar Stephan Beyer1-1/+7
"git stash -h" showed some incomplete and ugly usage information. For example, the useful "--keep-index" option for "save" or the "--index" option for "apply" were not shown. Also in the documentation synopsis they were not shown, so that there is no incentive to scroll down and even see that such options exist. This patch improves the git-stash synopsis in the documentation by mentioning that further options to the stash commands and then copies this synopsis to the usage information string of git-stash.sh. For the latter, the dashless git command string has to be inserted on the second and the following usage lines. The code of this is taken from git-sh-setup so that all lines will show the command string. Note that the "create" command is not advertised at all now, because it was not mentioned in git-stash.txt. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-05bash completion: More completions for 'git stash'Libravatar Lee Marlow1-1/+1
Add branch subcommand to completions and USAGE for git-stash.sh. Complete stash names for show, apply, drop, pop, and branch. Add "--index" long option for apply. Signed-off-by: Lee Marlow <lee.marlow@gmail.com> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-23stash save: fix parameter handlingLibravatar Junio C Hamano1-2/+2
A command line "git stash save --keep-index I was doing this" was misparsed and keep-index codepath did not trigger. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-13Merge branch 'am/stash-branch'Libravatar Junio C Hamano1-0/+21
* am/stash-branch: Add a test for "git stash branch" Implement "git stash branch <newbranch> <stash>"
2008-07-05stash: introduce 'stash save --keep-index' optionLibravatar SZEDER Gábor1-4/+18
'git stash save' saves local modifications to a new stash, and runs 'git reset --hard' to revert them to a clean index and work tree. When the '--keep-index' option is specified, after that 'git reset --hard' the previous contents of the index is restored and the work tree is updated to match the index. This option is useful if the user wants to commit only parts of his local modifications, but wants to test those parts before committing. Also add support for the completion of the new option, and add an example use case to the documentation. Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05Implement "git stash branch <newbranch> <stash>"Libravatar Abhijit Menon-Sen1-0/+21
Restores the stashed state on a new branch rooted at the commit on which the stash was originally created, so that conflicts caused by subsequent changes on the original branch can be dealt with. (Thanks to Junio for this nice idea.) Signed-off-by: Abhijit Menon-Sen <ams@toroid.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-15Ignore dirty submodule states during rebase and stashLibravatar Johannes Schindelin1-3/+3
When rebasing or stashing, chances are that you do not care about dirty submodules, since they are not updated by those actions anyway. So ignore the submodules' states. Note: the submodule states -- as committed in the superproject -- will still be stashed and rebased, it is _just_ the state of the submodule in the working tree which is ignored. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-22git-stash: add new 'pop' subcommandLibravatar Brandon Casey1-1/+9
This combines the existing stash subcommands 'apply' and 'drop' to allow a single stash entry to be applied and then dropped, in other words 'popped', from the stash list. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-22git-stash: add new 'drop' subcommandLibravatar Brandon Casey1-1/+27
This allows a single stash entry to be deleted. It takes an optional argument which is a stash reflog entry. If no arguments are supplied, it drops the most recent stash entry. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-06git-stash clear: refuse to work with extra parameter for nowLibravatar Junio C Hamano1-1/+6
Because it is so tempting to expect "git stash clear stash@{4}" to remove the fourth element in the stash while leaving other elements intact, we should not blindly throw away everything upon seeing such a command. This may change when we start using "git reflog delete" to selectively nuke a single (or multiple, for that matter) stash entries with such a command line. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-05git-stash: use stdout instead of stderr for non error messagesLibravatar Marco Costalba1-3/+3
Some scripts and libraries check stderr to detect a failing command, instead of checking the exit code. Because the output from git-status is not primarily for machine consumption, it would not hurt to send these messages to stdout instead and it will make it easier to drive the command for such callers. Signed-off-by: Marco Costalba <mcostalba@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-22Emit helpful status for accidental "git stash" saveLibravatar Wincent Colaiuta1-2/+4
If the user types "git stash" mistakenly thinking that this will list their stashes he/she may be surprised to see that it actually saved a new stash and reset their working tree and index. In the worst case they might not know how to recover the state. So help them by telling them exactly what was saved and also how to restore it immediately. Signed-off-by: Wincent Colaiuta <win@wincent.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-02git-stash: Display help message if git-stash is run with wrong sub-commandsLibravatar Kevin Leung1-7/+9
The current git-stash behaviour is very error prone to typos. For example, if you typed "git-stash llist", git-stash would think that you wanted to save to a stash named "llist", but in fact, you meant "git-stash list". Signed-off-by: Kevin Leung <kevinlsk@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-28Merge branch 'maint'Libravatar Junio C Hamano1-1/+1
* maint: scripts: do not get confused with HEAD in work tree Improve description of git-branch -d and -D in man page.
2007-11-28scripts: do not get confused with HEAD in work treeLibravatar Junio C Hamano1-1/+1
When you have a file called HEAD in your work tree, many commands that our scripts feed "HEAD" to would complain about the rev vs path ambiguity. A solution is to form command line more carefully by appending -- to them, which makes it clear that we mean HEAD rev not HEAD file. This patch would apply to maint. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-27git-stash: do not get fooled with "color.diff = true"Libravatar Pascal Obry1-2/+2
When colors are set to "true" on the repository, the git log output will contain control characters to set/reset the colors, even when the output is to a pipe. This makes list_stash() fail as the downstream sed does not see what it is expecting. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-17Merge branch 'ph/parseopt-sh'Libravatar Junio C Hamano1-0/+1
* ph/parseopt-sh: git-quiltimport.sh fix --patches handling git-am: -i does not take a string parameter. sh-setup: don't let eval output to be shell-expanded. git-sh-setup: fix parseopt `eval` string underquoting Give git-am back the ability to add Signed-off-by lines. git-rev-parse --parseopt scripts: Add placeholders for OPTIONS_SPEC Migrate git-repack.sh to use git-rev-parse --parseopt Migrate git-quiltimport.sh to use git-rev-parse --parseopt Migrate git-checkout.sh to use git-rev-parse --parseopt --keep-dashdash Migrate git-instaweb.sh to use git-rev-parse --parseopt Migrate git-merge.sh to use git-rev-parse --parseopt Migrate git-am.sh to use git-rev-parse --parseopt Migrate git-clone to use git-rev-parse --parseopt Migrate git-clean.sh to use git-rev-parse --parseopt. Update git-sh-setup(1) to allow transparent use of git-rev-parse --parseopt Add a parseopt mode to git-rev-parse to bring parse-options to shell scripts.
2007-11-14Merge branch 'jc/stash-create'Libravatar Junio C Hamano1-8/+26
* jc/stash-create: git-stash: Fix listing stashes git-merge: no reason to use cpio anymore Revert "rebase: allow starting from a dirty tree." rebase: allow starting from a dirty tree. stash: implement "stash create"
2007-11-07git-stash: Fix listing stashesLibravatar Emil Medve1-1/+5
Commit bc9e7399af3790918140c30a5b2c85bf9a8f1ad3 "reverted" commit f12e925ac23ad6169e046cfe05b8438a1611ad58 Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-06scripts: Add placeholders for OPTIONS_SPECLibravatar Junio C Hamano1-0/+1
--text follows this line-- These commands currently lack OPTIONS_SPEC; allow people to easily list with "git grep 'OPTIONS_SPEC=$'" what they can help improving. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-10-19Paper bag fix diff invocation in 'git stash show'Libravatar Shawn O. Pearce1-1/+1
In 89d750bf6fa025edeb31ad258cdd09a27a5c02fa I got a little too aggressive with changing "git diff" to "git diff-tree". This is shown to the user, who expects to see a full diff on their console, and will want to see the output of their custom diff drivers (if any) as the whole point of this call site is to show the diff to the end-user. Noticed by Johannes Sixt <j.sixt@viscovery.net>. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-10-18Avoid invoking diff drivers during git-stashLibravatar Shawn O. Pearce1-3/+3
git-stash needs to restrict itself to plumbing when running automated diffs as part of its operation as the user may have configured a custom diff driver that opens an interactive UI for certain/all files. Doing that during scripted actions is very unfriendly to the end-user and may cause git-stash to fail to work. Reported by Johannes Sixt Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-14stash: implement "stash create"Libravatar Junio C Hamano1-7/+21
This subcommand creates a stash from the current state and writes out the resulting commit object ID to the standard output, without updating the stash ref nor resetting the tree. It is intended to be used by scripts to temporarily rewind the working tree to a clean state. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-12stash: end index commit log with a newlineLibravatar Jean-Luc Herren1-1/+1
There was no newline at the end of the index commit message, putting the shell prompt at its end after a 'git cat-file commit $id'. This is similar to what was fixed in 843103d69388a5c74ed99753e1c162a66835b04d. Signed-off-by: Jean-Luc Herren <jlh@gmx.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-28git-stash apply --index: optimize postprocessingLibravatar Junio C Hamano1-6/+7
Originally, "apply --index" codepath was bolted on to the "update working tree files and index, but then revert the changes we make to the index except for added files so that we do not forget about them" codepath, almost as an afterthought. Because "apply --index" first prepares the final index state upfront, "revert except the added paths" postprocessing does not have to be done. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-28Fix git-stash apply --indexLibravatar Junio C Hamano1-6/+17
Two bugs that made the command practically unusable were fixed with this. - A stash created with a clean index does not have any difference between the base tree and the index tree. Trying to apply the diff between them to the index would error out with "No changes". Even when the user asked to unstash with --index, do not bother with --index action if the base tree and the index tree match. - After successfully performing the working tree merge, the index was reloaded from an earlier state of unstashed index with "read-tree"; this left all the paths cache dirty. By moving the call to git-status after this read-tree, match the cached stat information in the index. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-28git-stash: Make sure reflog is created for refs/stashLibravatar しらいしななこ1-0/+3
Earlier commit 7ab3cc70 fixed "stash clear" but broke save_stash, because it forgot to make sure the reflog file exists before saving. Signed-off-by: Nanako Shiraishi <nanako3@bluebottle.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-26git-stash: do not remove a ref by hand.Libravatar Junio C Hamano1-3/+4
Somebody on #git noticed that "git stash clear" left a packed ref behind for ref/stash. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-25Make sure git-stash works from subdirectory.Libravatar Junio C Hamano1-0/+1
We say "SUBDIRECTORY_OK" but we did not chdir to toplevel; this is fine as long as everything we use can be started from a subdirectory, but unfortunately "merge-recursive" is not one of the programs you can safely use from a subdirectory. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-08git-stash: try reusing cached stat info as much as possibleLibravatar Junio C Hamano1-3/+3
Earlier when we read a tree into a temporary index, we read it from scratch. Start from the current index and use read-tree -m to preserve cached stat information as much as possible, in order to speed up "git add -u". This makes "git stash" usable in a source tree of nontrivial size. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-07Merge branch 'js/stash'Libravatar Junio C Hamano1-1/+20
* js/stash: Teach git-stash to "apply --index"
2007-07-06stash: allow running from a subdirectoryLibravatar James Bowes1-0/+1
Signed-off-by: James Bowes <jbowes@dangerouslyinc.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-06Teach git-stash to "apply --index"Libravatar Johannes Schindelin1-1/+20
When given this subcommand, git-stash will try to merge the stashed index into the current one. Only trivial merges are possible, since we have no index for the index ;-) If a trivial merge is not possible, git-stash will bail out with a hint to skip the --index option. For good measure, finally include a test case. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-05git-stash: allow more descriptive reminder message when savingLibravatar Junio C Hamano1-6/+19
This allows you to say: $ git stash starting to implement X while creating a stash, and the resulting "stash list entry would read as: $ git stash list stash@{0}: On master: starting to implement X instead of the default message which talks about the commit the stash happens to be based on (hence does not have much to do with what the stashed change is trying to do). Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-04Update reflog message created for stashesLibravatar Junio C Hamano1-1/+1
A stash is about a change on top of an existing commit, and not about that commit that happened to be on which the change was created. Match the message we see in "git stash list" with the commit log message to make this clear. Signed-off-by: Junio C Hamano <gitster@pobox.com> Acked-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
2007-07-03stash: end commit log with a newlineLibravatar Uwe Kleine-König1-1/+1
If I do git cat-file commit $commitid for a commit created by stash, the next prompt starts directly after the shortlog of HEAD. Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02git-stash: make "save" the default action again.Libravatar Junio C Hamano1-3/+3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02Rewrite "git-frotz" to "git frotz"Libravatar Junio C Hamano1-27/+27
This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-01git-stash: don't complain when listing in a repo with no stashLibravatar Jeff King1-0/+5
Previously, the git-log invocation would complain if a repo had not had any stashes created in it yet: $ git-init $ git-stash fatal: ambiguous argument 'refs/stash': unknown revision or path not in the working tree. Use '--' to separate paths from revisions Instead, we only call git-log if we actually have a refs/stash. We could alternatively create the ref when any stash command is called, but it's better for the 'list' command to not require write access to the repo. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-01git-stash: fix "can't shift that many" with no argumentsLibravatar Jeff King1-1/+1
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-01git-stash: require "save" to be explicit and update documentationLibravatar Junio C Hamano1-2/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-30Add git-stash scriptLibravatar しらいしななこ1-0/+160
When my boss has something to show me and I have to update, for some reason I am always in the middle of doing something else, and git pull command refuses to work in such a case. I wrote this little script to save the changes I made, perform the update, and then come back to where I was, but on top of the updated commit. This is how you would use the script: $ git stash $ git pull $ git stash apply [jc: with a few fixlets from the list] Signed-off-by: Nanako Shiraishi <nanako3@bluebottle.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>