| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Allow "git mergetool --help" to run outside a Git repository.
* da/mergetool-tool-help:
difftool: don't assume that default sh is sane
mergetool: don't require a work tree for --tool-help
git-sh-setup: move GIT_DIR initialization into a function
mergetool: use more conservative temporary filenames
test-lib-functions: adjust style to match CodingGuidelines
t7610-mergetool: prefer test_config over git config
|
|
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By default, Git used to set $LESS to -FRSX if $LESS was not set by
the user. The FRX flags actually make sense for Git (F and X because
sometimes the output Git pipes to less is short, and R because Git
pipes colored output). The S flag (chop long lines), on the other
hand, is not related to Git and is a matter of user preference. Git
should not decide for the user to change LESS's default.
More specifically, the S flag harms users who review untrusted code
within a pager, since a patch looking like:
-old code;
+new good code; [... lots of tabs ...] malicious code;
would appear identical to:
-old code;
+new good code;
Users who prefer the old behavior can still set the $LESS environment
variable to -FRSX explicitly, or set core.pager to 'less -S'.
The documentation in config.txt is made a bit longer to keep both an
example setting the 'S' flag (needed to recover the old behavior)
and an example showing how to unset a flag set by Git.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the variable $OPTIONS_STUCKLONG is not empty, then rev-parse
option parsing is done in --stuck-long mode.
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Just like we give a reasonable default for "less" via the LESS
environment variable, specify a reasonable default for "lv" via the
"LV" environment variable when spawning the pager.
* jn/pager-lv-default-env:
pager: set LV=-c alongside LESS=FRSX
|
|
On systems with lv configured as the preferred pager (i.e.,
DEFAULT_PAGER=lv at build time, or PAGER=lv exported in the
environment) git commands that use color show control codes instead of
color in the pager:
$ git diff
^[[1mdiff --git a/.mailfilter b/.mailfilter^[[m
^[[1mindex aa4f0b2..17e113e 100644^[[m
^[[1m--- a/.mailfilter^[[m
^[[1m+++ b/.mailfilter^[[m
^[[36m@@ -1,11 +1,58 @@^[[m
"less" avoids this problem because git uses the LESS environment
variable to pass the -R option ('output ANSI color escapes in raw
form') by default. Use the LV environment variable to pass 'lv' the
-c option ('allow ANSI escape sequences for text decoration / color')
to fix it for lv, too.
Noticed when the default value for color.ui flipped to 'auto' in
v1.8.4-rc0~36^2~1 (2013-06-10).
Reported-by: Olaf Meeuwissen <olaf.meeuwissen@avasys.jp>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a shell snippet meant to be sourced by other shell scripts, an
opening #! line does more harm than good.
The harm:
- When the shell library is sourced, the interpreter and options from
the #! line are not used. Specifying a particular shell can
confuse the reader into thinking it is safe for the shell library
to rely on idiosyncrasies of that shell.
- Using #! instead of a plain comment drops a helpful visual clue
that this is a shell library and not a self-contained script.
- Tools such as lintian can use a #! line to tell when an
installation script has failed by forgetting to set a script
executable. This check does not work if shell libraries also start
with a #! line.
The good:
- Text editors notice the #! line and use it for syntax highlighting
if you try to edit the installed scripts (without ".sh" suffix) in
place.
The use of the #! for file type detection is not needed because Git's
shell libraries are meant to be edited in source form (with ".sh"
suffix). Replace the opening #! lines with comments.
This involves tweaking the test harness's valgrind support to find
shell libraries by looking for "# " in the first line instead of "#!"
(see v1.7.6-rc3~7, 2011-06-17).
Suggested by Russ Allbery through lintian. Thanks to Jeff King and
Clemens Buchacher for further analysis.
Tested by searching for non-executable scripts with #! line:
find . -name .git -prune -o -type f -not -executable |
while read file
do
read line <"$file"
case $line in
'#!'*)
echo "$file"
;;
esac
done
The only remaining scripts found are templates for shell scripts
(unimplemented.sh, wrap-for-bin.sh) and sample input used in tests
(t/t4034/perl/{pre,post}).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Document rules to use GIT_REFLOG_ACTION variable in the scripted
Porcelain. git-rebase--interactive locally violates them, but it
is a leaf user that does not call out to or dot-source other
scripts, so it does not urgently need to be fixed.
* jc/reflog-doc:
setup_reflog_action: document the rules for using GIT_REFLOG_ACTION
|
|
Some implementations of 'echo' (e.g. dash's built-in) interpret
backslash sequences in their arguments.
This triggered at least one bug: the error message of "rebase -i" was
turning \t in commit messages into actual tabulations. There may be
others.
Using "printf '%s\n'" instead avoids this bad behavior, and is the form
used by the "say" function.
Noticed-by: David Kastrup <dak@gnu.org>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The set_reflog_action helper (in git-sh-setup) is designed to be
used once at the very top of a program, like this in "git am", for
example:
set_reflog_action am
The helper function sets the given string to GIT_REFLOG_ACTION only
when GIT_REFLOG_ACTION is not yet set. Thanks to this, "git am",
when run as the top-level program, will use "am" in GIT_REFLOG_ACTION
and the reflog entries made by whatever it does will record the
updates of refs done by "am".
Because of the conditional assignment, when "git am" is run as a
subprogram (i.e. an implementation detail) of "git rebase" that
already sets GIT_REFLOG_ACTION to its own name, the call in "git am"
to the helper function at the beginning will *not* have any effect.
So "git rebase" can do this:
set_reflog_action rebase
... do its own preparation, like checking out "onto" commit
... decide to do "format-patch" to "am" pipeline
git format-patch --stdout >mbox
git am mbox
and the reflog entries made inside "git am" invocation will say
"rebase", not "am".
Calls to "git" commands that update refs would use GIT_REFLOG_ACTION
to record who did that update. Most such calls in scripted Porcelains
do not define custom reflog message and rely on GIT_REFLOG_ACTION to
contain its (or its caller's, when it is called as a subprogram) name.
If a scripted Porcelain wants to record a custom reflog message for
a single invocation of "git" command (e.g. when "git rebase" uses
"git checkout" to detach HEAD at the commit a series is to be
replayed on), it needs to set GIT_REFLOG_ACTION to the custom
message and export it while calling the "git" command, but such an
assignment must be restricted to that single "git" invocation and
should not be left behind to affect later codepath.
Document the rules to avoid future confusion.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The normal way to check whether a certain revision resolves to a valid
commit is:
$ git rev-parse --verify $REV^0
Unfortunately, this does not work when $REV is of the type :/quuxery.
Write a helper to work around this limitation.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adjust the order mergetools feeds the files to the p4merge backend
to match the p4 convention.
* kb/p4merge:
merge-one-file: force content conflict for "both sides added" case
git-merge-one-file: send "ERROR:" messages to stderr
git-merge-one-file: style cleanup
merge-one-file: remove stale comment
mergetools/p4merge: create a base if none available
mergetools/p4merge: swap LOCAL and REMOTE
|
|
Originally, with no base, Git gave P4Merge $LOCAL as a dummy base:
p4merge "$LOCAL" "$LOCAL" "$REMOTE" "$MERGED"
Commit 0a0ec7bd changed this to:
p4merge "empty file" "$LOCAL" "$REMOTE" "$MERGED"
to avoid the problem of being unable to save in some circumstances with
similar inputs.
Unfortunately this approach produces much worse results on differing
inputs. P4Merge really regards the blank file as the base, and once you
have just a couple of differences between the two branches you end up
with one a massive full-file conflict. The 3-way diff is not readable,
and you have to invoke "difftool MERGE_HEAD HEAD" manually to get a
useful view.
The original approach appears to have invoked special 2-way merge
behaviour in P4Merge that occurs only if the base filename is "" or
equal to the left input. You get a good visual comparison, and it does
not auto-resolve differences. (Normally if one branch matched the base,
it would autoresolve to the other branch).
But there appears to be no way of getting this 2-way behaviour and being
able to reliably save. Having base==left appears to be triggering other
assumptions. There are tricks the user can use to force the save icon
on, but it's not intuitive.
So we now follow a suggestion given in the original patch's discussion:
generate a virtual base, consisting of the lines common to the two
branches. This is the same as the technique used in resolve and octopus
merges, so we relocate that code to a shared function.
Note that if there are no differences at the same location, this
technique can lead to automatic resolution without conflict, combining
everything from the 2 files. As with the other merges using this
technique, we assume the user will inspect the result before saving.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Reviewed-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
mergetool, bisect, and other commands that use
git-sh-setup print a usage string that is inconsistent
with the rest of Git when they are invoked as "git $cmd -h".
The compiled builtins use the lowercase "usage:" string
but these commands say "Usage:". Adjust the shell library
to make these consistent.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some shells do not behave correctly when IFS is unset; work it
around by explicitly setting it to the default value.
* jc/maint-fbsd-sh-ifs-workaround:
sh-setup: work around "unset IFS" bug in some shells
|
|
With an unset IFS, field splitting is supposed to act as if IFS is
set to the usual SP HT LF, but Marc Branchaud reports that the shell
on FreeBSD 7.2 gets this wrong.
It is easy to set it to the default value manually, and it is also
safer in case somebody tries to save the old value away and restore,
e.g.
$oIFS=$IFS
IFS=something
...
IFS=$oIFS
while forgetting that the original IFS might be unset (which can be
coded but would be more involved).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The only ident-parsing function we currently provide is
get_author_ident_from_commit. This is not very
flexible for two reasons:
1. It takes a commit as an argument, and can't read from
commit headers saved on disk.
2. It will only parse authors, not committers.
This patch provides a more flexible interface which will
parse multiple idents from a commit provide on stdin. We can
easily use it as a building block for the current function
to retain compatibility.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the user exports a non-default IFS without HT, scripts that
rely on being able to parse "ls-files -s | while read a b c..."
start to fail. Protect them from such a misconfiguration.
* jc/maint-protect-sh-from-ifs:
sh-setup: protect from exported IFS
|
|
Many scripted Porcelains rely on being able to split words at the
default $IFS characters, i.e. SP, HT and LF. If the user exports a
non-default IFS to the environment, what they read from plumbing
commands such as ls-files that use HT to delimit fields may not be
split in the way we expect.
Protect outselves by resetting it, just like we do so against CDPATH
exported to the environment.
Noticed by Andrew Dranse <adranse@oanda.com>.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recently we tweaked this scriptlet to let mingw port redefine "pwd" to
always return Windows-style path, but the code to do so came after the
first use of "pwd" to set up $GIT_DIR shell variable.
Move the block to define these workaround wrappers, so that everything
everything that executes when the scriptlet is dot-sourced uses the
replacements.
Noticed-by: Ramsay Jones
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/parse-date-raw:
parse_date(): '@' prefix forces git-timestamp
parse_date(): allow ancient git-timestamp
|
|
* jc/parse-date-raw:
parse_date(): '@' prefix forces git-timestamp
parse_date(): allow ancient git-timestamp
|
|
The only place that the issue this series addresses was observed
where we read "cat-file commit" output and put it in GIT_AUTHOR_DATE
in order to replay a commit with an ancient timestamp.
With the previous patch alone, "git commit --date='20100917 +0900'"
can be misinterpreted to mean an ancient timestamp, not September in
year 2010. Guard this codepath by requring an extra '@' in front of
the raw git timestamp on the parsing side. This of course needs to
be compensated by updating get_author_ident_from_commit and the code
for "git commit --amend" to prepend '@' to the string read from the
existing commit in the GIT_AUTHOR_DATE environment variable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A few scripted Porcelain implementations pretend as if the routine to show
their own help messages are triggered upon "git cmd --help", but a command
line parser of "git" will hijack such a request and shows the manpage for
the cmd subcommand.
Leaving the code to handle such input is simply misleading.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This behaves similar to "die" but can exit with status different from the
usual 1.
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Mentored-by: Jens Lehmann <Jens.Lehmann@web.de>
Mentored-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Somebody tried "git pull" from a random place completely outside the work
tree, while exporting GIT_DIR and GIT_WORK_TREE that are set to correct
places, e.g.
GIT_WORK_TREE=$HOME/git.git
GIT_DIR=$GIT_WORK_TREE/.git
export GIT_WORK_TREE GIT_DIR
cd /tmp
git pull
At the beginning of git-pull, we check "require-work-tree" and then
"cd-to-toplevel". I _think_ the original intention when I wrote the
command was "we MUST have a work tree, our $(cwd) might not be at the
top-level directory of it", and no stronger than that. That check is a
very sensible thing to do before doing cd-to-toplevel. We check that the
place we would want to go exists, and then go there.
But the implementation of require_work_tree we have today is quite
different. I don't have energy to dig the history, but currently it says:
test "$(git rev-parse --is-inside-work-tree 2>/dev/null)" = true ||
die "fatal: $0 cannot be used without a working tree."
Which is completely bogus. Even though we may happen to be just outside
of it right now, we may have a working tree that we can cd_to_toplevel
back to.
Add a function "require_work_tree_exists" that implements the check
this function originally intended (this is so that third-party scripts
that rely on the current behaviour do not have to get broken).
For now, update _no_ in-tree scripts, not even "git pull", as nobody on
the list seems to really care about the above corner case workflow that
triggered this. Scripts can be updated after vetting that they do want the
"we want to make sure the place we are going to go actually exists"
semantics.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Although Git interally has the facility to differentiate between
porcelain and plubmbing commands and appropriately print errors,
several shell scripts invoke plubming commands triggering cryptic
plumbing errors to be displayed on a porcelain interface. This patch
replaces the "needs update" message in git-pull and git-rebase, when
`git update-index` is run, with a more friendly message.
Reported-by: Joshua Jensen <jjensen@workspacewhiz.com>
Reported-by: Thore Husfeldt <thore.husfeldt@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* uk/fix-author-ident-sed-script:
get_author_ident_from_commit(): remove useless quoting
|
|
Add an is_absolute_path function to abstract out platform differences
in checking for an absolute or relative path.
Specifically fixes t4150-am on Windows.
[PT: updated following suggestion from j6t to support \* and //*]
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
|
|
The command 's/'\''/'\''\'\'\''/g' only triples single quotes:
$ echo "What's up?" | sed 's/'\''/'\''\'\'\''/g'
What'''s up?
This doesn't hurt as compared to a single single quote it only adds an
empty string, but it makes the script needlessly complicated and hard to
understand. The useful quoting is done by s/'\''/'\''\\'\'\''/g at the
beginning of the script and only once for all three variables.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* gb/maint-submodule-env:
is_submodule_modified(): clear environment properly
submodules: ensure clean environment when operating in a submodule
shell setup: clear_local_git_env() function
rev-parse: --local-env-vars option
Refactor list of of repo-local env vars
|
|
* jn/maint-fix-pager:
tests: Fix race condition in t7006-pager
t7006-pager: if stdout is not a terminal, make a new one
tests: Add tests for automatic use of pager
am: Fix launching of pager
git svn: Fix launching of pager
git.1: Clarify the behavior of the --paginate option
Make 'git var GIT_PAGER' always print the configured pager
Fix 'git var' usage synopsis
|
|
* gf/maint-sh-setup-nongit-ok:
require_work_tree broken with NONGIT_OK
|
|
Introduce an auxiliary function to clear all repo-local environment
variables. This should be invoked by any shell script that switches
repository during execution, to ensure that the environment is clean
and that things such as the git dir and worktree are set up correctly.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With NONGIT_OK set, require_work_tree function outside a git repository
gives a syntax error. This is caused by an incorrect use of "test" that
didn't anticipate $(git rev-parse --is-inside-work-tree) may return an
empty string.
Properly quote the argument to "test", and send the standard error stream
to /dev/null to avoid giving duplicate error messages.
Signed-off-by: Gabriel Filion <lelutin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The pagination functionality in git am has some problems:
- It does not check if stdout is a tty, so it always paginates.
- If $GIT_PAGER uses any environment variables, they are being
ignored, since it does not run $GIT_PAGER through eval.
- If $GIT_PAGER is set to the empty string, instead of passing
output through to stdout, it tries to run $dotest/patch.
Fix them. While at it, move the definition of git_pager() to
git-sh-setup so authors of other commands are not tempted to
reimplement it with the same mistakes.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some scripts are expected to be sourced instead of executed on their own.
Avoid some confusion by not marking them executable.
The executable bit was confusing the valgrind support of our test scripts,
which assumed that any executable without a #!-line should be intercepted
and run through valgrind. So during valgrind-enabled tests, any script
sourcing these files actually sourced the valgrind interception script
instead.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
rev-parse --show-toplevel gives the absolute (aka "physical") path of the
toplevel directory and is more portable as 'cd -P' is not supported by all
shell implementations.
This is also closer to what setup_work_tree() does.
Signed-off-by: Steven Drake <sdrake@xnet.co.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rs/work-around-grep-opt-insanity:
Protect scripted Porcelains from GREP_OPTIONS insanity
mergetool--lib: simplify guess_merge_tool()
Conflicts:
git-instaweb.sh
|
|
If the user has exported the GREP_OPTIONS environment variable, the output
from "grep" and "egrep" in scripted Porcelains may be different from what
they expect. For example, we may want to count number of matching lines,
by "grep" piped to "wc -l", and GREP_OPTIONS=-C3 will break such use.
The approach taken by this change to address this issue is to protect only
our own use of grep/egrep. Because we do not unset it at the beginning of
our scripts, hook scripts run from the scripted Porcelains are exposed to
the same insanity this environment variable causes when grep/egrep is used
to implement logic (e.g. "grep | wc -l"), and it is entirely up to the
hook scripts to protect themselves.
On the other hand, applypatch-msg hook may want to show offending words in
the proposed commit log message using grep to the end user, and the user
might want to set GREP_OPTIONS=--color to paint the match more visibly.
The approach to protect only our own use without unsetting the environment
variable globally will allow this use case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the new "git var GIT_EDITOR" feature to decide what editor to
use, instead of duplicating its logic elsewhere. This should make
the behavior of commands in edge cases (e.g., editor names with
spaces) a little more consistent.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Scripts should use say() when they want to output non-error messages.
This function helps future script writers easily implement a quiet
option by setting GIT_QUIET to enable suppression of non-error messages.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In an earlier patch, we introduced SANE_TOOL_PATH that is prepended to
user's PATH. This had an unintended consequence of overriding user's
private binary directory that typically comes earlier in the PATH to holds
even saner commands than whatever comes with the system.
For example, a user may have ~/bin that is early in the path and contains
a shell script "vi" that launches system's /bin/vi with specific options.
Prepending SANE_TOOL_PATH to the PATH that happens to have "vi" in it
defeats such customization.
This fixes the issue by inserting SANE_TOOL_PATH just before /bin or
/usr/bin appears on the PATH.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some platforms (like SunOS and family) have kept their common binaries at
some historical moment in time, and introduced new binaries with modern
features in a special location like /usr/xpg4/bin or /usr/ucb. Some of the
features provided by these modern binaries are expected and required by git.
If the featureful binaries are not in the users path, then git could end up
using the less featureful binary and fail.
So provide a mechanism to prepend elements to the users PATH at runtime so
the modern binaries will be found.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In cd_to_toplevel, instead of 'cd $(unset PWD; /bin/pwd)/$path'
use 'cd -P $path'. The "-P" option yields a desirable similarity to
C chdir.
While the "-P" option may be slightly less commonly supported than
/bin/pwd, it is more concise, better tested, and less error prone.
I've already added the 'unset PWD' to fix the /bin/pwd solution on
BSD; there may be more edge cases out there.
This still passes all the same test cases in t5521-pull-symlink.sh and
t2300-cd-to-toplevel.sh, even before updating them to use 'pwd -P'.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On Mac OS X and possibly BSDs, /bin/pwd reads PWD from the environment if
available and shows the logical path by default rather than the physical
one.
Unset PWD before running /bin/pwd in both cd_to_toplevel and its test.
Still use the external /bin/pwd because in my Bash on Linux, the builtin
pwd prints the same result whether or not PWD is set.
Signed-off-by: Marcel M. Cary <marcel@oak.homeunix.org>
Tested-by: Wincent Colaiuta <win@wincent.com> (on Mac OS X 10.5.5)
Tested-by: Marcel Koeppen <git-dev@marzelpan.de> (on Mac OS X 10.5.6)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
I want directories of my working tree to be linked to from various
paths on my filesystem where third-party components expect them, both
in development and production environments. A build system's install
step could solve this, but I develop scripts and web pages that don't
need to be built. Git's submodule system could solve this, but we
tend to develop, branch, and test those directories all in unison, so
one big repository feels more natural. We prefer to edit and commit
on the symlinked paths, not the canonical ones, and in that setting,
"git pull" fails to find the top-level directory of the repository
while other commands work fine.
"git pull" fails because POSIX shells have a notion of current working
directory that is different from getcwd(). The shell stores this path
in PWD. As a result, "cd ../" can be interpreted differently in a
shell script than chdir("../") in a C program. The shell interprets
"../" by essentially stripping the last textual path component from
PWD, whereas C chdir() follows the ".." link in the current directory
on the filesystem. When PWD is a symlink, these are different
destinations. As a result, Git's C commands find the correct
top-level working tree, and shell scripts do not.
Changes:
* When interpreting a relative upward (../) path in cd_to_toplevel,
prepend the cwd without symlinks, given by /bin/pwd
* Add tests for cd_to_toplevel and "git pull" in a symlinked
directory that failed before this fix, plus contrasting scenarios
that already worked
Signed-off-by: Marcel M. Cary <marcel@oak.homeunix.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When you misuse a git command, you are shown the usage string.
But this is currently shown in the dashed form. So if you just
copy what you see, it will not work, when the dashed form
is no longer supported.
This patch makes git commands show the dash-less version.
For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh
generates a dash-less usage string now.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the PATH lists the Windows system directories before the MSYS
directories, Windows's own incompatible sort and find commands would be
picked up. We implement these commands as functions and call the real
tools by absolute path.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
|
Junio C Hamano
David Aguilar
Matthieu Moy
Nicolas Vigier
Jonathan Nieder
Ramkumar Ramachandra
Kevin Bracey
Jeff King
Ramsay Jones
Clemens Buchacher
Fredrik Gustafsson
Pat Thoyts
Uwe Kleine-König
Giuseppe Bilotta
Gabriel Filion
Steven Drake
Stephen Boyd
Marcel M. Cary
Stephan Beyer
Johannes Sixt