| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In cd_to_toplevel, instead of 'cd $(unset PWD; /bin/pwd)/$path'
use 'cd -P $path'. The "-P" option yields a desirable similarity to
C chdir.
While the "-P" option may be slightly less commonly supported than
/bin/pwd, it is more concise, better tested, and less error prone.
I've already added the 'unset PWD' to fix the /bin/pwd solution on
BSD; there may be more edge cases out there.
This still passes all the same test cases in t5521-pull-symlink.sh and
t2300-cd-to-toplevel.sh, even before updating them to use 'pwd -P'.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On Mac OS X and possibly BSDs, /bin/pwd reads PWD from the environment if
available and shows the logical path by default rather than the physical
one.
Unset PWD before running /bin/pwd in both cd_to_toplevel and its test.
Still use the external /bin/pwd because in my Bash on Linux, the builtin
pwd prints the same result whether or not PWD is set.
Signed-off-by: Marcel M. Cary <marcel@oak.homeunix.org>
Tested-by: Wincent Colaiuta <win@wincent.com> (on Mac OS X 10.5.5)
Tested-by: Marcel Koeppen <git-dev@marzelpan.de> (on Mac OS X 10.5.6)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
I want directories of my working tree to be linked to from various
paths on my filesystem where third-party components expect them, both
in development and production environments. A build system's install
step could solve this, but I develop scripts and web pages that don't
need to be built. Git's submodule system could solve this, but we
tend to develop, branch, and test those directories all in unison, so
one big repository feels more natural. We prefer to edit and commit
on the symlinked paths, not the canonical ones, and in that setting,
"git pull" fails to find the top-level directory of the repository
while other commands work fine.
"git pull" fails because POSIX shells have a notion of current working
directory that is different from getcwd(). The shell stores this path
in PWD. As a result, "cd ../" can be interpreted differently in a
shell script than chdir("../") in a C program. The shell interprets
"../" by essentially stripping the last textual path component from
PWD, whereas C chdir() follows the ".." link in the current directory
on the filesystem. When PWD is a symlink, these are different
destinations. As a result, Git's C commands find the correct
top-level working tree, and shell scripts do not.
Changes:
* When interpreting a relative upward (../) path in cd_to_toplevel,
prepend the cwd without symlinks, given by /bin/pwd
* Add tests for cd_to_toplevel and "git pull" in a symlinked
directory that failed before this fix, plus contrasting scenarios
that already worked
Signed-off-by: Marcel M. Cary <marcel@oak.homeunix.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When you misuse a git command, you are shown the usage string.
But this is currently shown in the dashed form. So if you just
copy what you see, it will not work, when the dashed form
is no longer supported.
This patch makes git commands show the dash-less version.
For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh
generates a dash-less usage string now.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the PATH lists the Windows system directories before the MSYS
directories, Windows's own incompatible sort and find commands would be
picked up. We implement these commands as functions and call the real
tools by absolute path.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
|
|
Using 'git rev-parse --git-dir' makes the code shorter and more future-
proof.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We used to use "cat-file commit $commit" to extract the original
author information from existing commit, but an earlier commit
5ac2715 (Consistent message encoding while reusing log from an
existing commit) changed it to use "git show -s $commit". If
you have a file in your work tree that can be interpreted as a
valid object name (e.g. "HEAD"), this conversion will not work.
Disambiguate by marking the end of revision parameter on the
comand line with an explicit "--" to fix this.
This breakage is most visible with rebase when a file called
"HEAD" exists in the worktree.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Earlier conversion of shell scripts to parse-options made usage()
to run "git cmd -h" which in turn emit LONG_USAGE and exit with 0
status. This is inconsistent with the scripts that do not use
parse-options, whose usage() died with the message, exiting with 1.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This config variable makes it possible to choose the default format
used to display help. This format will be used only if no option
like -a|--all|-i|--info|-m|--man|-w|--web is passed to "git-help".
The following values are possible for this variable:
- "man" --> "man" program is used
- "info" --> "info" program is used
- "web" --> "git-browse-help" is used
By default we still show help using "man".
This patch also adds -m|--man command line option to use "man"
to allow overriding the "help.format" configuration variable.
Note that this patch also revert some recent changes in
"git-browse-help" because they prevented to look for config
variables in the global configuration file.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The users used to be able to say "git help cat-file" from anywhere, but
the browse-help script insisted to be in a git repository, which caused
"git help -w cat-file" to barf outside. Correct it.
While at it, remove leftover debugging "echo".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous patch missed the same construct in git-clone.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
|
|
The 'automagic parseopt' support corrupted non option parameters
that had IFS characters in them. The worst case is when it had
a non option parameter like this:
$1=" * some string"
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If you set OPTIONS_SPEC, git-sh-setups uses git-rev-parse --parseopt
automatically.
It also diverts usage to re-exec $0 with the -h option as parse-options.c
will catch that.
If you need git-rev-parse --parseopt to keep the `--` the user may have
passed to your command, set OPTIONS_KEEPDASHDASH to a non empty value
in your script.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rev-parse --git-dir" trick does not play well with worktree
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Noticed by Anupam Srivastava.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Quite a few of the scripts are rather careless about using GIT_DIR
while changing directories.
Some try their hands (with different likelihood of success) in making
GIT_DIR absolute.
This patch lets git-sh-setup.sh cater for absolute directories (in a
way that should work reliably also with non-Unix path names) and
removes the respective kludges in git-filter-branch.sh and
git-instaweb.sh.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous code only allowed specifying a single executable rather
than a complete command like "emacsclient --alternate-editor vi" in
those variables. Since VISUAL/EDITOR appear to be traditionally
passed to a shell for interpretation (as corroborated with "less",
"mail" and "mailx", while the really ancient "more" indeed allows only
an executable name), the shell function git_editor has been amended
appropriately.
"eval" is employed to have quotes and similar interpreted _after_
expansion, so that specifying
EDITOR='"/home/dak/My Commands/notepad.exe"'
can be used for actually using commands with blanks.
Instead of passing just the first argument of git_editor on, we pass
all of them (so that +lineno might be employed at a later point of
time, or so that multiple files may be edited when appropriate).
Strictly speaking, there is a change in behavior: when
git config core.editor
returns a valid but empty string, the fallbacks are still searched.
This is more consistent, and the old code was problematic with regard
to multiple blanks. Putting in additional quotes might have worked,
but quotes inside of command substitution inside of quotes is nasty
enough to not reliably work the same across "Bourne shells".
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The old version of work-tree support was an unholy mess, barely readable,
and not to the point.
For example, why do you have to provide a worktree, when it is not used?
As in "git status". Now it works.
Another riddle was: if you can have work trees inside the git dir, why
are some programs complaining that they need a work tree?
IOW it is allowed to call
$ git --git-dir=../ --work-tree=. bla
when you really want to. In this case, you are both in the git directory
and in the working tree. So, programs have to actually test for the right
thing, namely if they are inside a working tree, and not if they are
inside a git directory.
Also, GIT_DIR=../.git should behave the same as if no GIT_DIR was
specified, unless there is a repository in the current working directory.
It does now.
The logic to determine if a repository is bare, or has a work tree
(tertium non datur), is this:
--work-tree=bla overrides GIT_WORK_TREE, which overrides core.bare = true,
which overrides core.worktree, which overrides GIT_DIR/.. when GIT_DIR
ends in /.git, which overrides the directory in which .git/ was found.
In related news, a long standing bug was fixed: when in .git/bla/x.git/,
which is a bare repository, git formerly assumed ../.. to be the
appropriate git dir. This problem was reported by Shawn Pearce to have
caused much pain, where a colleague mistakenly ran "git init" in "/" a
long time ago, and bare repositories just would not work.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These variables let you specify an editor that will be launched in
preference to the EDITOR and VISUAL environment variables. The order
of preference is GIT_EDITOR, core.editor, EDITOR, VISUAL.
[jc: added a test and config variable documentation]
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This uses the remove-dashes target to replace "git-frotz" to "git frotz".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/rebase:
Teach rebase -i about --preserve-merges
rebase -i: provide reasonable reflog for the rebased branch
rebase -i: several cleanups
ignore git-rebase--interactive
Teach rebase an interactive mode
Move the pick_author code to git-sh-setup
|
|
At the moment, only git-commit uses that code, to pick the author name,
email and date from a given commit.
This code will be reused in git rebase --interactive.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Up to now to check for a working tree this was used:
!is_bare && !inside_git_dir
(the check for bare is redundant because is_inside_git_dir
returned already 1 for bare repositories).
Now the check is:
inside_work_tree && !inside_git_dir
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch helps when you accidentally run something like git-clean
in the git directory instead of the work tree.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Tom Prince <tom.prince@ualberta.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Andy Parkins noticed that the error message some "whole tree"
oriented commands emit is stated misleadingly when they refused
to run from a subdirectory.
We could probably allow some of them to work from a subdirectory
but that is a semantic change that could have unintended side
effects, so let's start at first by rewording the error message
to be easier to read without doing anything else to be safe.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
If the user tries to run a porcelainish command which requires
a working directory in a bare repository they may get unexpected
results which are difficult to predict and may differ from command
to command.
Instead we should detect that the current repository is a bare
repository and refuse to run the command there, as there is no
working directory associated with it.
[jc: updated Shawn's original somewhat -- bugs are mine.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Sometimes, people have only fetch access into a bare repository
that is used as a back-up location (or a distribution point) but
does not have a push access for networking reasons, e.g. one end
being behind a firewall, and updating the "current branch" in
such a case is perfectly fine.
This allows such a fetch without --update-head-ok, which is a
flag that should never be used by end users otherwise.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Junio rightly pointed out that the --reflog-action parameter
was starting to get out of control, as most porcelain code
needed to hand it to other porcelain and plumbing alike to
ensure the reflog contained the top-level user action and
not the lower-level actions it invoked.
At Junio's suggestion we are introducing the new set_reflog_action
function to all shell scripts, allowing them to declare early on
what their default reflog name should be, but this setting only
takes effect if the caller has not already set the GIT_REFLOG_ACTION
environment variable.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Since repo-config does not fail in non-git directory, it is not
a good command to use to test the git-ness nor validate the
repository revision of $GIT_DIR.
Original patch by Robert Shearman but with minor fixes.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Wrappers that use sh-setup took --help but not -h. Noticed by
Sébastien Pierre.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This fixes the same issue as a previous fix by Alex Riesen does.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This is to be nicer to people with unusable GECOS field.
"git-var -l" is currently broken in that when used by a user who
does not have a usable GECOS field and has not corrected it by
exporting GIT_COMMITTER_NAME environment variable it dies when
it tries to output GIT_COMMITTER_IDENT (same thing for AUTHOR).
"git-pull" used "git-var -l" only because it needed to get a
configuration variable before "git-repo-config --get" was
introduced. Use the latter tool designed exactly for this
purpose.
"git-sh-setup" used "git-var GIT_AUTHOR_IDENT" without actually
wanting to use its value. The only purpose was to cause the
command to check and barf if the repository format version
recorded in the $GIT_DIR/config file is too new for us to deal
with correctly. Instead, use "repo-config --get" on a random
property and see if it die()s, and check if the exit status is
128 (comes from die -- missing variable is reported with exit
status 1, so we can tell that case apart).
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
There were some problems with the usage message clean-up patch
series. I hadn't realised that subdirectory aware scripts can't source
git-sh-setup. I propose that we change this and let the scripts which
are subdirectory aware set a variable, SUBDIRECTORY_OK, before they
source git-sh-setup.
The scripts will also set USAGE and possibly LONG_USAGE before they
source git-sh-setup. If LONG_USAGE isn't set it defaults to USAGE.
If we go this way it's easy to catch --help in git-sh-setup, print the
(long) usage message to stdout and exit cleanly. git-sh-setup can
define a 'usage' shell function which can be called by the scripts to
print the short usage string to stderr and exit non-cleanly. It will
also be easy to change $0 to basename $0 or something else, if would
like to do that sometime in the future.
What follows is a patch to convert a couple of the commands to this
style. If it's ok with everyone to do it this way I will convert the
rest of the scripts too.
[jc: thrown in to proposed updates queue for comments.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Any core commands that use setup_git_directory() now check if
given GIT_DIR is really a valid repository, so the same check in
git-sh-setup can use it without reimplementing it in shell.
This commit changes git-sh-setup to use git-var command for
that, although any other commands would do.
Note that we export GIT_DIR explicitly when calling git-var;
without it, the caller of this script would use GIT_DIR that we
return (which is to assume ./.git unless the caller has it
elsewhere) while git-var would go up to find a .git directory in
our parent directories, which would be checking a different
directory from what our callers will be using.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Now all the users of this script detect its exit status and die,
complaining that it is outside git repository. So move the code
that dies from all callers to git-sh-setup script.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This makes it possible to have a "sparse" git object subdirectory
structure, something that has become much more attractive now that people
use pack-files all the time.
As a result of pack-files, a git object directory doesn't necessarily have
any individual objects lying around, and in that case it's just wasting
space to keep the empty first-level object directories around: on many
filesystems the 256 empty directories will be aboue 1MB of diskspace.
Even more importantly, after you re-pack a project that _used_ to be
unpacked, you could be left with huge directories that no longer contain
anything, but that waste space and take time to look through.
With this change, "git prune-packed" can just do an rmdir() on the
directories, and they'll get removed if empty, and re-created on demand.
This patch also tries to fix up "write_sha1_from_fd()" to use the new
common infrastructure for creating the object files, closing a hole where
we might otherwise leave half-written objects in the object database.
[jc: I unoptimized the part that really removes the fan-out directories
to ease transition. init-db still wastes 1MB of diskspace to hold 256
empty fan-outs, and prune-packed rmdir()'s the grown but empty directories,
but runs mkdir() immediately after that -- reducing the saving from 150KB
to 146KB. These parts will be re-introduced when everybody has the
on-demand capability.]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This adds the counterpart of git-update-ref that lets you read
and create "symbolic refs". By default it uses a symbolic link
to represent ".git/HEAD -> refs/heads/master", but it can be compiled
to use the textfile symbolic ref.
The places that did 'readlink .git/HEAD' and 'ln -s refs/heads/blah
.git/HEAD' have been converted to use new git-symbolic-ref command, so
that they can deal with either implementation.
Signed-off-by: Junio C Hamano <junio@twinsun.com>
|
|
My stupidity deserved to be yelled at by Linus ... there is no reason
to require the working tree to be clean when merging -- the only
requirements are index to match HEAD commit and the paths involved in
merge are up to date in the working tree. Revert and cherry-pick are
just specialized forms of merge, and the requirements should be the
same.
Remove the 'general purpose routine to make sure tree is clean' from
git-sh-setup, to prevent me from getting tempted again.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
CDPATH has two problems:
* It takes scripts to unexpected places (somebody had
CDPATH=..:../..:$HOME and the "cd" in git-clone.sh:get_repo_base
took him to $HOME/.git when he said "clone foo bar" to clone a
repository in "foo" which had "foo/.git"). CDPATH mechanism does
not implicitly give "." at the beginning of CDPATH, which is
the most irritating part.
* The extra echo when it does its thing confuses scripts further.
Most of our scripts that use "cd" includes git-sh-setup so the problem
is primarily fixed there. git-clone starts without a repository, and
it needs its own fix.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
As promised, this is the "big tool rename" patch. The primary differences
since 0.99.6 are:
(1) git-*-script are no more. The commands installed do not
have any such suffix so users do not have to remember if
something is implemented as a shell script or not.
(2) Many command names with 'cache' in them are renamed with
'index' if that is what they mean.
There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support is expected to be removed in the near
future.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Marcel M. Cary
Stephan Beyer
Johannes Sixt
Lars Hjemli
Junio C Hamano
Christian Couder
Pierre Habouzit
Nguyễn Thái Ngọc Duy
David Kastrup
Johannes Schindelin
Adam Roben
Matthias Lederhofer
Tom Prince
Junio C Hamano
Shawn O. Pearce
Fredrik Kuivinen
Linus Torvalds
Junio C Hamano