| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Using Mail::Address made sense when we didn't have a proper parser. We
now have a reasonable address parser, and using Mail::Address
_if available_ causes much more trouble than it gives benefits:
* Developers typically test one version, not both.
* Users may not be aware that installing Mail::Address will change the
behavior. They may complain about the behavior in one case without
knowing that Mail::Address is involved.
* Having this optional Mail::Address makes it tempting to anwser "please
install Mail::Address" to users instead of fixing our own code. We've
reached the stage where bugs in our parser should be fixed, not worked
around.
Signed-off-by: Matthieu Moy <git@matthieu-moy.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a followup over 9d33439 (send-email: only allow one address
per body tag, 2017-02-20). The first iteration did allow writting
Cc: <foo@example.com> # garbage
but did so by matching the regex ([^>]*>?), i.e. stop after the first
instance of '>'. However, it did not properly deal with
Cc: foo@example.com # garbage
Fix this using a new function strip_garbage_one_address, which does
essentially what the old ([^>]*>?) was doing, but dealing with more
corner-cases. Since we've allowed
Cc: "Foo # Bar" <foobar@example.com>
in previous versions, it makes sense to continue allowing it (but we
still remove any garbage after it). OTOH, when an address is given
without quoting, we just take the first word and ignore everything
after.
Signed-off-by: Matthieu Moy <git@matthieu-moy.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git send-email" learned to overcome some SMTP server limitation
that does not allow many pieces of e-mails to be sent over a single
session.
* xz/send-email-batch-size:
send-email: --batch-size to work around some SMTP server limit
|
|
Some email servers (e.g. smtp.163.com) limit the number emails to be
sent per session (connection) and this will lead to a faliure when
sending many messages.
Teach send-email to disconnect after sending a number of messages
(configurable via the --batch-size=<num> option), wait for a few
seconds (configurable via the --relogin-delay=<seconds> option) and
reconnect, to work around such a limit.
Also add two configuration variables to give these options the default.
Note:
We will use this as a band-aid for now, but in the longer term, we
should look at and react to the SMTP error code from the server;
Xianqiang reports that 450 and 451 are returned by problematic
servers.
cf. https://public-inbox.org/git/7993e188.d18d.15c3560bcaf.Coremail.zxq_yx_007@163.com/
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A hotfix for a topic already in 'master'.
* jt/send-email-validate-hook:
send-email: check for repo before invoking hook
|
|
A hotfix to a topic in 'master'.
* dk/send-email-avoid-net-smtp-ssl-when-able:
send-email: Net::SMTP::starttls was introduced in v2.34
|
|
Unless --no-validate is passed, send-email will invoke
$repo->repo_path() in its search for a validate hook regardless of
whether a Git repo is actually present. Teach send-email to first check
for repo existence.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We cannot rely on the starttls method being present in Net::SMTP until
c274b798e6881a941d941808c6d89966975cb8c8 (Merge branch 'ipv6_ssl' of
https://github.com/noxxi/perl-libnet into noxxi-ipv6_ssl, 2014-06-02),
which set the module version to 2.34.
This version was first shipped as part of perl in v5.21.5~169 (Update
libnet to CPAN version 3.01, 2014-10-10).
Noticed on an Ubuntu system with perl 5.18.2-2ubuntu1.1, which
provides Net::SMTP version 2.31. The error message is
Can't locate object method "starttls" via package "Net::SMTP" at /usr/lib/git-core/git-send-email line 1410.
Reported-by: Brandon Williams <bmwill@google.com>
Reported-and-tested-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git send-email" now uses Net::SMTP::SSL, which is obsolete, only
when needed. Recent versions of Net::SMTP can do TLS natively.
* dk/send-email-avoid-net-smtp-ssl-when-able:
send-email: Net::SMTP::SSL is obsolete, use only when necessary
|
|
Net::SMTP itself can do the necessary SSL and STARTTLS bits just fine
since version 1.28, and Net::SMTP::SSL is now deprecated. Since 1.28
isn't that old yet, keep the old code in place and use it when
necessary.
While we're in the area, mark some messages for translation that were
not yet marked as such.
Signed-off-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, send-email has support for rudimentary e-mail validation.
Allow the user to add support for more validation by providing a
sendemail-validate hook.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"Cc:" on the trailer part does not have to conform to RFC strictly,
unlike in the e-mail header. "git send-email" has been updated to
ignore anything after '>' when picking addresses, to allow non-address
cruft like " # stable 4.4" after the address.
* jh/send-email-one-cc:
send-email: only allow one address per body tag
|
|
"Cc:" on the trailer part does not have to conform to RFC strictly,
unlike in the e-mail header. "git send-email" has been updated to
ignore anything after '>' when picking addresses, to allow non-address
cruft like " # stable 4.4" after the address.
* jh/send-email-one-cc:
send-email: only allow one address per body tag
|
|
Adding comments after a tag in the body is a common practise (e.g. in
the Linux kernel) and git-send-email has been supporting this for years
by removing any trailing cruft after the address.
After some recent changes, any trailing comment is now instead appended
to the recipient name (with some random white space inserted) resulting
in undesirable noise in the headers, for example:
CC: "# 3 . 3 . x : 1b9508f : sched : Rate-limit newidle" <stable@vger.kernel.org>
Revert to the earlier behaviour of discarding anything after the (first)
address in a tag while parsing the body.
Note that multiple addresses after are still allowed after a command
line switch (and in a CC header field).
Also note that --suppress-cc=self was never honoured when using multiple
addresses in a tag.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When composing an e-mail, there is a message for the user whose lines
begin in "GIT:" that can be marked for translation.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark warnings, errors and other messages that are interpolated for
translation.
We call sprintf() before calling die() and in few other circumstances in
order to replace the values on the placeholders.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark warnings, errors and other messages for translation.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark strings often displayed to the user for translation.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A careless invocation of "git send-email directory/" after editing
0001-change.patch with an editor often ends up sending both
0001-change.patch and its backup file, 0001-change.patch~, causing
embarrassment and a minor confusion. Detect such an input and
offer to skip the backup files when sending the patches out.
* jc/send-email-skip-backup:
send-email: detect and offer to skip backup files
|
|
A question by "git send-email" to ask the identity of the sender
has been updated.
* jd/send-email-to-whom:
send-email: fix grammo in the prompt that asks e-mail recipients
|
|
The message, which dates back to the very original version 83b24437
made in 2005, sounds clumsy, grammatically incorrect, and is hard to
understand.
Reported-by: John Darrington <john@darrington.wattle.id.au>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* ew/send-email-drop-data-dumper:
send-email: do not load Data::Dumper
|
|
"git send-email" now uses a more readable timestamps when
formulating a message ID.
* ew/send-email-readable-message-id:
send-email: more meaningful Message-ID
|
|
Diligent people save output from format-patch to files, proofread
and edit them and then finally send the result out. If the
resulting files are sent out with "git send-email 0*", this ends up
sending backup files (e.g. 0001-X.patch.backup or 0001-X.patch~)
left by their editors next to the final version. Sending them with
"git send-email 0*.patch" (if format-patch was run with the standard
suffix) would avoid such an embarrassment, but not everybody is
careful.
After collecting files to be sent (and sorting them if read from a
directory), notice when the file being sent out has the same name as
the previous file, plus some suffix (e.g. 0001-X.patch was sent, and
we are looking at 0001-X.patch.backup or 0001-X.patch~), and the
suffix begins with a non-alnum (e.g. ".backup" or "~") and ask if
the user really wants to send it out. Once the user skips sending
such a "backup" file, remember the suffix and stop asking the same
question (e.g. after skipping 0001-X.patch~, skip 0002-Y.patch~
without asking).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We never used Data::Dumper in this script. The only reference
of it was always commented out and removed over a decade ago in
commit 4bc87a28be020a6bf7387161c65ea3d8e4a0228b
("send-email: Change from Mail::Sendmail to Net::SMTP")
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using a YYYYmmddHHMMSS date representation is more meaningful to
humans, especially when used for lookups on NNTP servers or linking
to archive sites via Message-ID (e.g. mid.gmane.org or
mid.mail-archive.com). This timestamp format more easily gives a
reader of the URL itself a rough date of a linked message compared
to having them calculate the seconds since the Unix epoch.
Furthermore, having the MUA name in the Message-ID seems to be a
rare oddity I haven't noticed outside of git-send-email. We
already have an optional X-Mailer header field to advertise for
us, so extending the Message-ID by 15 characters can make for
unpleasant Message-ID-based URLs to archive sites.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The regex for parsing mailrc considers everything after the
second whitespace to be the email address, up to the end of
the line. We have to include whitespace there, because you
may have multiple space-separated addresses, each with their
own internal quoting.
But if there is trailing whitespace, we include that, too.
This confuses quotewords() when we try to split the
individual addresses, and we end up storing "undef" in our
alias list. Later parts of the code then access that,
generating perl warnings.
Let's tweak our regex to throw away any trailing whitespace
on each line.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git send-email" was confused by escaped quotes stored in the alias
files saved by "mutt", which has been corrected.
* ew/send-email-mutt-alias-fix:
git-send-email: do not double-escape quotes from mutt
|
|
mutt saves aliases with escaped quotes in the form of:
alias dot \"Dot U. Sir\" <somebody@example.org>
When we pass through our sanitize_address routine,
we end up with double-escaping:
To: "\\\"Dot U. Sir\\\" <somebody@example.org>
Remove the escaping in mutt only for now, as I am not sure
if other mailers can do this or if this is better fixed in
sanitize_address.
Cc: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Cc: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Improve error reporting when SMTP TLS fails.
* jk/send-email-ssl-errors:
send-email: enable SSL level 1 debug output
|
|
If a server's certificate isn't accepted by send-email, the output is:
Unable to initialize SMTP properly. Check config and use --smtp-debug.
but adding --smtp-debug=1 just produces the same output since we don't
get as far as talking SMTP.
Turning on SSL debug at level 1 gives:
DEBUG: .../IO/Socket/SSL.pm:1796: SSL connect attempt failed error:14090086:SSL routines:ssl3_get_server_certificate:certificate verify failed
DEBUG: .../IO/Socket/SSL.pm:673: fatal SSL error: SSL connect attempt failed error:14090086:SSL routines:ssl3_get_server_certificate:certificate verify failed
DEBUG: .../IO/Socket/SSL.pm:1780: IO::Socket::IP configuration failed
IO::Socket::SSL defines level 1 debug as "print out errors from
IO::Socket::SSL and ciphers from Net::SSLeay". In fact, it aliases
Net::SSLeay::trace which is defined to guarantee silence at level 0 and
only emit error messages at level 1, so let's enable it by default.
The modification of warnings is needed to avoid a warning about:
Name "IO::Socket::SSL::DEBUG" used only once: possible typo
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach send-email to dump mail aliases, so that we can do tab completion
on the command line.
* jk/send-email-complete-aliases:
completion: add support for completing email aliases
sendemail: teach git-send-email to dump alias names
|
|
Use a safer behavior when we hit errors verifying remote certificates.
* jk/send-email-ca-path:
send-email: die if CA path doesn't exist
|
|
If the CA path isn't found it's most likely to indicate a
misconfiguration, in which case accepting any certificate is unlikely to
be the correct thing to do.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Jeff King <peff@peff.net>
|
|
As it says in the name, the SSL certificate path is a path so treat it
as one and support tilde-expansion.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Add an option "--dump-aliases" which changes the default behavior of
git-send-email. This mode will simply read the alias files configured by
sendemail.aliasesfile and sendemail.aliasfiletype and dump a list of all
configured aliases, one per line. The intended use case for this option
is the bash-completion script which will use it to autocomplete aliases
on the options which take addresses.
Add some tests for the new option using various alias file formats.
A possible future extension to the alias dump format could be done by
extending the --dump-aliases to take an optional argument defining the
format to display. This has not been done in this patch as no user of
this information has been identified.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
|
|
When "git send-email" wanted to talk over Net::SMTP::SSL,
Net::Cmd::datasend() did not like to be fed too many bytes at the
same time and failed to send messages. Send the payload one line
at a time to work around the problem.
* sa/send-email-smtp-batch-data-limit:
git-send-email.perl: Fixed sending of many/huge changes/patches
|
|
When "git send-email" wanted to talk over Net::SMTP::SSL,
Net::Cmd::datasend() did not like to be fed too many bytes at the
same time and failed to send messages. Send the payload one line
at a time to work around the problem.
* sa/send-email-smtp-batch-data-limit:
git-send-email.perl: Fixed sending of many/huge changes/patches
|
|
Sometimes sending huge patches/commits fail with
[Net::SMTP::SSL] Connection closed at /usr/lib/git-core/git-send-email
line 1320.
Running the command with --smtp-debug=1 yields to
Net::SMTP::SSL: Net::Cmd::datasend(): unexpected EOF on command channel:
at /usr/lib/git-core/git-send-email line 1320.
[Net::SMTP::SSL] Connection closed at /usr/lib/git-core/git-send-email
line 1320.
Stefan described it in his mail like this:
It seems to me that there is a size limit, after cutting down the patch
to ~16K, sending started to work. I cut it twice, once by removing lines
from the head and once from the bottom, in both cases at the size of
around 16K I could send the patch.
See also original report:
http://permalink.gmane.org/gmane.comp.version-control.git/274569
Reported-by: Juston Li <juston.h.li@gmail.com>
Tested-by: Markos Chandras <hwoarang@gentoo.org>
Signed-off-by: Lars Wendler <polynomial-c@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a minor regression brought in to "git send-email" by a recent
addition of the "--smtp-auth" option.
* bn/send-email-smtp-auth-error-message-fix:
send-email: fix uninitialized var warning for $smtp_auth
|
|
On the latest version of git-send-email, I see this error just before
running SMTP auth (I didn't provide any --smtp-auth= parameter):
Use of uninitialized value $smtp_auth in pattern match (m//) at \
/home/briannorris/git/git/git-send-email.perl line 1139.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git send-email" learned a new option --smtp-auth to limit the SMTP
AUTH mechanisms to be used to a subset of what the system library
supports.
* jv/send-email-selective-smtp-auth:
send-email: provide whitelist of SMTP AUTH mechanisms
|
|
When sending an e-mail, the client and server must agree on an
authentication mechanism. Some servers (due to misconfiguration
or a bug) deny valid credentials for certain mechanisms. In this
patch, a new option --smtp-auth and configuration entry smtpAuth
are introduced. If smtp_auth is defined, it works as a whitelist
of allowed mechanisms for authentication selected from the ones
supported by the installed SASL perl library.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git send-email" now performs alias-expansion on names that are
given via --cccmd, etc.
This round comes with a lot more enhanced e-mail address parser,
which makes it a bit scary, but as long as it works as designed, it
makes it wonderful ;-).
* rl/send-email-aliases:
send-email: suppress meaningless whitespaces in from field
send-email: allow multiple emails using --cc, --to and --bcc
send-email: consider quote as delimiter instead of character
send-email: reduce dependencies impact on parse_address_line
send-email: minor code refactoring
send-email: allow use of aliases in the From field of --compose mode
send-email: refactor address list process
t9001-send-email: refactor header variable fields replacement
send-email: allow aliases in patch header and command script outputs
t9001-send-email: move script creation in a setup test
|
|
Remove leading and trailing whitespaces in from field before
interepreting it to improve consistency with other options. The
split_addrs function already take care of trailing and leading
whitespaces for to, cc and bcc fields.
The from option now:
- has the same behavior when passing arguments like
" jdoe@example.com ", "\t jdoe@example.com " or
"jdoe@example.com".
- interprets aliases in string containing leading and trailing
whitespaces such as " alias" or "alias\t" like other options.
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Accept a list of emails separated by commas in flags --cc, --to and
--bcc. Multiple addresses can already be given by using these options
multiple times, but it is more convenient to allow cutting-and-pasting
a list of addresses from the header of an existing e-mail message,
which already lists them as comma-separated list, as a value to a
single parameter.
The following format can now be used:
$ git send-email --to='Jane <jdoe@example.com>, mike@example.com'
Remove the limitation imposed by 79ee555b (Check and document the
options to prevent mistakes, 2006-06-21) which rejected every argument
with comma in --cc, --to and --bcc.
Signed-off-by: Mathieu Lienard--Mayor <Mathieu.Lienard--Mayor@ensimag.imag.fr>
Signed-off-by: Jorge Juan Garcia Garcia <Jorge-Juan.Garcia-Garcia@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Do not consider quote inside a recipient name as character when
they are not escaped. This interprets:
"Jane" "Doe" <jdoe@example.com>
as:
"Jane Doe" <jdoe@example.com>
instead of:
"Jane\" \"Doe" <jdoe@example.com>
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
parse_address_line had not the same behavior whether the user had
Mail::Address or not. Teach parse_address_line to behave like
Mail::Address.
When the user input is correct, this implementation behaves
exactly like Mail::Address except when there are quotes
inside the name:
"Jane Do"e <jdoe@example.com>
In this case the result of parse_address_line is:
With M::A : "Jane Do" e <jdoe@example.com>
Without : "Jane Do e" <jdoe@example.com>
When the user input is not correct, the behavior is also mostly
the same.
Unlike Mail::Address, this doesn't parse groups and recursive
commentaries.
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Group expressions in a single if statement. This avoid checking
multiple time if the variable $sender is defined.
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Aliases were expanded before considering the From field of the
--compose option. This is inconsistent with other fields
(To, Cc, ...) which already support aliases.
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Matthieu Moy
Junio C Hamano
xiaoqiang zhao
Jonathan Tan
Jonathan Nieder
Dennis Kaarsemaker
Johan Hovold
Vasco Almeida
Eric Wong
Jeff King
John Keeping
Jacob Keller
Stefan Agner
Brian Norris
Jan Viktorin
Remi Lespinet