| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git rebase", unlike all other callers of "gc --auto", did not
ignore the exit code from "gc --auto".
* jk/ok-to-fail-gc-auto-in-rebase:
rebase: ignore failures from "gc --auto"
|
|
After rebasing, we call "gc --auto" to clean up if we
created a lot of loose objects. However, we do so inside an
&&-chain. If "gc --auto" fails (e.g., because a previous
background gc blocked us by leaving "gc.log" in place),
then:
1. We will fail to clean up the state directory, leaving
the user stuck in the rebase forever (even "git am
--abort" doesn't work, because it calls "gc --auto"!).
2. In some cases, we may return a bogus exit code from
rebase, indicating failure when everything except the
auto-gc succeeded.
We can fix this by ignoring the exit code of "gc --auto".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There was no way to defeat a configured rebase.autostash variable
from the command line, as "git rebase --no-autostash" was missing.
* jk/rebase-no-autostash:
Documentation/git-rebase: fix --no-autostash formatting
rebase: support --no-autostash
|
|
This is documented as an option but we don't actually accept it.
Support it so that it is possible to override the "rebase.autostash"
config variable.
Reported-by: Daniel Hahler <genml+git-2014@thequod.de>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase --quiet" was not quite quiet when there is nothing to
do.
* jk/rebase-quiet-noop:
rebase: silence "git checkout" for noop rebase
|
|
When the branch to be rebased is already up to date, we
"git checkout" the branch, print an "up to date" message,
and end the rebase early. However, our checkout may print
"Switched to branch 'foo'" or "Already on 'foo'", even if
the user has asked for "--quiet".
We should avoid printing these messages at all, "--quiet" or
no. Since the rebase is a noop, this checkout can be seen as
optimizing out these other two checkout operations (that
happen in a real rebase):
1. Moving to the detached HEAD to start the rebase; we
always feed "-q" to checkout there, and instead rely on
our own custom message (which respects --quiet).
2. Finishing a rebase, where we move to the final branch.
Here we actually use update-ref rather than
git-checkout, and produce no messages.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If $GIT_COMMON_DIR is set, it should be $GIT_COMMON_DIR/hooks/, not
$GIT_DIR/hooks/. Just let rev-parse --git-path handle it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the `--fork-point` argument was added to `git rebase`, we changed
the value of $upstream to be the fork point instead of the point from
which we want to rebase. When $orig_head..$upstream is empty this does
not change the behaviour, but when there are new changes in the upstream
we are no longer checking if any of them are patch-identical with
changes in $upstream..$orig_head.
Fix this by introducing a new variable to hold the fork point and using
this to restrict the range as an extra (negative) revision argument so
that the set of desired revisions becomes (in fork-point mode):
git rev-list --cherry-pick --right-only \
$upstream...$orig_head ^$fork_point
This allows us to correctly handle the scenario where we have the
following topology:
C --- D --- E <- dev
/
B <- master@{1}
/
o --- B' --- C* --- D* <- master
where:
- B' is a fixed-up version of B that is not patch-identical with B;
- C* and D* are patch-identical to C and D respectively and conflict
textually if applied in the wrong order;
- E depends textually on D.
The correct result of `git rebase master dev` is that B is identified as
the fork-point of dev and master, so that C, D, E are the commits that
need to be replayed onto master; but C and D are patch-identical with C*
and D* and so can be dropped, so that the end result is:
o --- B' --- C* --- D* --- E <- dev
If the fork-point is not identified, then picking B onto a branch
containing B' results in a conflict and if the patch-identical commits
are not correctly identified then picking C onto a branch containing D
(or equivalently D*) results in a conflict.
This change allows us to handle both of these cases, where previously we
either identified the fork-point (with `--fork-point`) but not the
patch-identical commits *or* (with `--no-fork-point`) identified the
patch-identical commits but not the fact that master had been rewritten.
Reported-by: Ted Felix <ted@tedfelix.com>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The autostash mode of "git rebase -i" did not restore the dirty
working tree state if the user aborted the interactive rebase by
emptying the insn sheet.
* rr/rebase-autostash-fix:
rebase -i: test "Nothing to do" case with autostash
rebase -i: handle "Nothing to do" case with autostash
|
|
* rr/rebase-autostash-fix:
rebase -i: test "Nothing to do" case with autostash
rebase -i: handle "Nothing to do" case with autostash
|
|
Adjust shell scripts to use $(cmd) instead of `cmd`.
* ep/shell-command-substitution: (41 commits)
t5000-tar-tree.sh: use the $( ... ) construct for command substitution
t4204-patch-id.sh: use the $( ... ) construct for command substitution
t4119-apply-config.sh: use the $( ... ) construct for command substitution
t4116-apply-reverse.sh: use the $( ... ) construct for command substitution
t4057-diff-combined-paths.sh: use the $( ... ) construct for command substitution
t4038-diff-combined.sh: use the $( ... ) construct for command substitution
t4036-format-patch-signer-mime.sh: use the $( ... ) construct for command substitution
t4014-format-patch.sh: use the $( ... ) construct for command substitution
t4013-diff-various.sh: use the $( ... ) construct for command substitution
t4012-diff-binary.sh: use the $( ... ) construct for command substitution
t4010-diff-pathspec.sh: use the $( ... ) construct for command substitution
t4006-diff-mode.sh: use the $( ... ) construct for command substitution
t3910-mac-os-precompose.sh: use the $( ... ) construct for command substitution
t3905-stash-include-untracked.sh: use the $( ... ) construct for command substitution
t1050-large.sh: use the $( ... ) construct for command substitution
t1020-subdirectory.sh: use the $( ... ) construct for command substitution
t1004-read-tree-m-u-wf.sh: use the $( ... ) construct for command substitution
t1003-read-tree-prefix.sh: use the $( ... ) construct for command substitution
t1002-read-tree-m-u-2way.sh: use the $( ... ) construct for command substitution
t1001-read-tree-m-2way.sh: use the $( ... ) construct for command substitution
...
|
|
When a user invokes
$ git rebase -i @~3
with dirty files and rebase.autostash turned on, and exits the $EDITOR
with an empty buffer, the autostash fails to apply. Although the primary
focus of rr/rebase-autostash was to get the git-rebase--backend.sh
scripts to return control to git-rebase.sh, it missed this case in
git-rebase--interactive.sh. Since this case is unlike the other cases
which return control for housekeeping, assign it a special return status
and handle that return value explicitly in git-rebase.sh.
Reported-by: Karen Etheridge <ether@cpan.org>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Work around /bin/sh that does not like "return" at the top-level
of a file that is dot-sourced from inside a function definition.
* km/avoid-non-function-return-in-rebase:
Revert "rebase: fix run_specific_rebase's use of "return" on FreeBSD"
rebase: avoid non-function use of "return" on FreeBSD
|
|
This reverts commit 99855ddf4bd319cd06a0524e755ab1c1b7d39f3b.
The workaround 99855ddf introduced to deal with problematic
"return" statements in scripts run by "dot" commands located
inside functions only handles one part of the problem. The
issue has now been addressed by not using "return" statements
in this way in the git-rebase--*.sh scripts.
This workaround is therefore no longer necessary, so clean
up the code by reverting it.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* bg/rebase-off-of-previous-branch:
rebase: allow "-" short-hand for the previous branch
|
|
Teach rebase the same shorthand as checkout and merge to name the
branch to rebase the current branch on; that is, that "-" means "the
branch we were previously on".
Requested-by: Tim Chase <git@tim.thechases.com>
Signed-off-by: Brian Gesiak <modocache@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is no functional change. The reason for this change is to be able
to add a new option taking an optional argument.
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The -M option does not exist in OPTIONS_SPEC, so there is no use to try
to find it.
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove a check on the number of arguments for --onto and -x options.
It is not possible for $# to be <= 2 at this point :
- if --onto or -x has an argument, git rev-parse --parseopt will
provide something like this :
set -- --onto 'x' --
when parsing the "--onto" option, $# will be 3 or more if there are
other options.
- if --onto or -x doesn't have an argument, git rev-parse --parseopt
will exit with an error and display usage information.
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the variable $OPTIONS_STUCKLONG is not empty, then rev-parse
option parsing is done in --stuck-long mode.
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When no arguments are specified, $switch_to is empty so we end up
passing the empty string to "git merge-base --fork-point", which causes
an error. git-rebase carries on at this point, but in fact we have
failed to apply the fork-point operation.
It turns out that the test in t3400 that was meant to test this didn't
actually need the fork-point behaviour, so enhance it to make sure that
the fork-point is applied correctly. The modified test fails without
the change to git-rebase.sh in this patch.
Reported-by: Andreas Krey <a.krey@gmx.de>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 15a147e (rebase: use @{upstream} if no upstream specified,
2011-02-09) says:
Make it default to 'git rebase @{upstream}'. That is also what
'git pull [--rebase]' defaults to, so it only makes sense that
'git rebase' defaults to the same thing.
but that isn't actually the case. Since commit d44e712 (pull: support
rebased upstream + fetch + pull --rebase, 2009-07-19), pull has actually
chosen the most recent reflog entry which is an ancestor of the current
branch if it can find one.
Add a '--fork-point' argument to git-rebase that can be used to trigger
this behaviour. This option is turned on by default if no non-option
arguments are specified on the command line, otherwise we treat an
upstream specified on the command-line literally.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Work around a bug in FreeBSD shell that caused a regression to "git
rebase" in v1.8.4. May need to be later applied to 'maint'.
* mm/rebase-continue-freebsd-WB:
rebase: fix run_specific_rebase's use of "return" on FreeBSD
|
|
Since a1549e10, git-rebase--am.sh uses the shell's "return" statement, to
mean "return from the current file inclusion", which is POSIXly correct,
but badly interpreted on FreeBSD, which returns from the current
function, hence skips the finish_rebase statement that follows the file
inclusion.
Make the use of "return" portable by using the file inclusion as the last
statement of a function.
Reported-by: Christoph Mallon <christoph.mallon@gmx.de>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rr/rebase-autostash:
git-rebase: fix typo
|
|
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase [-i]" used to leave just "rebase" as its reflog message
for some operations. This rewords them to be more informative.
* rr/rebase-reflog-message-reword:
rebase -i: use a better reflog message
rebase: use a better reflog message
|
|
Finishing touches for the "git rebase --autostash" feature
introduced earlier.
* rr/rebase-stash-store:
rebase: use 'git stash store' to simplify logic
stash: introduce 'git stash store'
stash: simplify option parser for create
stash doc: document short form -p in synopsis
stash doc: add a warning about using create
|
|
Allow various commit objects to be given to "git rebase" by ':/look
for this string' syntax, e.g. "git rebase --onto ':/there'".
* rr/rebase-sha1-by-string-query:
rebase: use peel_committish() where appropriate
sh-setup: add new peel_committish() helper
t/rebase: add failing tests for a peculiar revision
|
|
Now that the "checkout" invoked internally from "rebase" knows to
honor GIT_REFLOG_ACTION, we can start to use it to write a better
reflog message when "rebase anotherbranch", "rebase --onto branch",
etc. internally checks out the new fork point. We will write:
rebase: checkout master
instead of the old
rebase
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
rebase has no reason to know about the implementation of the stash. In
the case when applying the autostash results in conflicts, replace the
relevant code in finish_rebase () to simply call 'git stash store'.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The revisions specified on the command-line as <onto> and <upstream>
arguments could be of the form :/quuxery; so, use peel_committish() to
resolve them. The failing tests in t/rebase and t/rebase-interactive
now pass.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the following case
$ git rebase master
Current branch autostash-fix is up to date.
the autostash is not applied automatically, because this codepath
forgets to call finish_rebase(). Fix this. Also add a test to guard
against regressions.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the following case
$ git rebase master
Fast-forwarded autostash-fix to master.
The autostash is not applied automatically, because this codepath
forgets to call finish_rebase(). Fix this. Also add a test to guard
against regressions.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This new feature allows a rebase to be executed on a dirty worktree or
index. It works by creating a temporary "dangling merge commit" out
of the worktree and index changes (via 'git stash create'), and
automatically applying it after a successful rebase or abort.
rebase stores the SHA-1 hex of the temporary merge commit, along with
the rest of the rebase state, in either
.git/{rebase-merge,rebase-apply}/autostash depending on the kind of
rebase. Since $state_dir is automatically removed at the end of a
successful rebase or abort, so is the autostash.
The advantage of this approach is that we do not affect the normal
stash's reflogs, making the autostash invisible to the end-user. This
means that you can use 'git stash' during a rebase as usual.
When the autostash application results in a conflict, we push
$state_dir/autostash onto the normal stash and remove $state_dir
ending the rebase. The user can inspect the stash, and pop or drop at
any time.
Most significantly, this feature means that a caller like pull (with
pull.rebase set to true) can easily be patched to remove the
require_clean_work_tree restriction.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On successful completion of a rebase in git-rebase--$backend.sh, the
$backend script cleans up on its own and exits. The cleanup routine
is however, independent of the $backend, and each $backend script
unnecessarily duplicates this work:
rm -rf "$state_dir"
git gc --auto
Prepare git-rebase.sh for later patches that return control from each
$backend script back to us, for performing this generic cleanup
routine. The code that this patch adds is currently unreachable, and
will only start to be used when git-rebase--$backend.sh scripts are
taught to return control in later patches.
Another advantage is that git-rebase.sh can implement a generic
finish_rebase() to possibly do additional tasks in addition to the
cleanup.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ph/rebase-original:
rebase: find orig_head unambiguously
|
|
When we 'git rebase $upstream', git uses 'rev-parse --verify
$current_branch' to find ORIG_HEAD. But if $current_branch
is ambiguous, 'rev-parse --verify' emits a warning and returns
a SHA1 anyway. When the wrong ambiguous choice is used,
git-rebase fails non-gracefully: it emits a warning about
failing to lock $current_branch, an error about being unable to
checkout $current_branch again, and it might even decide the
rebase is a fast-forward when it is not.
In the 'rebase $upstream' case, we already know the unambiguous
spelling of $current_branch is "HEAD". Fix git-rebase to find
$orig_head unambiguously.
Add a test in t3400-rebase.sh which creates an ambiguous branch
name and rebases it implicitly with 'git rebase $other'.
Signed-off-by: Phil Hord <hordp@cisco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows users to edit the todo file while they're stopped in the
middle of an interactive rebase. When this action is executed, all
comments from the original todo file are stripped, and new help messages
are appended to the end.
Signed-off-by: Andrew Wong <andrew.kw.w@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 95135b0 (rebase: stricter check of standalone sub command,
2011-02-06), git-rebase has not allowed to use -i together with e.g.
--continue. Yet, when rebase started using OPTIONS_SPEC in 45e2acf
(rebase: define options in OPTIONS_SPEC, 2011-02-28), the usage message
included
git-rebase [-i] --continue | --abort | --skip
Remove the "[-i]" from this line.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Andrew Wong <andrew.kw.w@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a typo in the error messages which is shown if it seems that a
rebase is already in progress.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since there is a modern OPTIONS_SPEC variable in use in this script,
the obsolete USAGE and LONG_USAGE variables are no longer used.
Remove them.
In addition, the obsolete LONG_USAGE variable has the following
message in it:
A'\''--B'\''--C'\''
And such complex LONG_USAGE message will break xgettext when
extracting l10n messages (but if single quotes are removed from the
message, xgettext works fine on 'git-rebase.sh').
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Gettext message in a shell script should not start with '-', one
workaround is adding '--' between gettext and the message, like:
gettext -- "--exec option ..."
But due to a bug in the xgettext extraction, xgettext can not
extract the actual message for this case. Rewriting the message
is a simpler and better solution.
Reported-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark messages in git-rebase.sh for translation. While doing this
Jonathan noticed that the comma usage and sentence structure of the
resolvemsg was not quite right, so correct that and its cousins in
git-am.sh and t/t0201-gettext-fallbacks.sh at the same time.
Some tests would start to fail with GETTEXT_POISON turned on after
this update. Use test_i18ncmp and test_i18ngrep where appropriate
to mark strings that should only be checked in the C locale output
to avoid such issues.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase [-i] --root $tip" can now be used to rewrite all the
history down to the root.
* cw/rebase-i-root:
t3404: make test 57 work with dash and others
Add tests for rebase -i --root without --onto
rebase -i: support --root without --onto
|
|
Teach "am --rebasing" codepath to grab authorship, log message and
the patch text directly out of existing commits. This will help
rebasing commits that have confusing "diff" output in their log
messages.
* mz/rebase-no-mbox:
am: don't call mailinfo if $rebasing
am --rebasing: get patch body from commit, not from mailbox
rebase --root: print usage on too many args
rebase: don't source git-sh-setup twice
|
|
Allow --root to be specified to rebase -i without --onto, making it
possible to edit and re-order all commits right back to the root(s).
If there is a conflict to be resolved when applying the first change,
the user will expect a sane index and working tree to get sensible
behaviour from git-diff and friends, so create a sentinel commit with an
empty tree to rebase onto. Automatically squash the sentinel with any
commits rebased directly onto it, so they end up as root commits in
their own right and retain their authorship and commit message.
Implicitly use rebase -i for non-interactive rebase of --root without
an --onto argument now that rebase -i can correctly do this.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jeff King
John Keeping
Nguyễn Thái Ngọc Duy
Ramkumar Ramachandra
Elia Pinto
Kyle J. McKay
Brian Gesiak
Nicolas Vigier
Matthieu Moy
Ralf Thielow
Phil Hord
Andrew Wong
Martin von Zweigbergk
Jiang Xin
Chris Webb