Age | Commit message (Collapse) | Author | Files | Lines |
|
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ae/preservemerge:
rebase: Support preserving merges in non-interactive mode
|
|
It is sometimes desirable to disable the safety net of pre-rebase hook
when the user knows what he is doing (for example, when the original
changes on the branch have not been shown to the public yet).
This teaches --no-verify option to git-rebase, which is similar to the way
pre-commit hook is bypassed by git-commit.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
The original git-rebase honored pre-rebase hook so that public branches
can be protected from getting rebased, but rebase --interactive ignored
the hook entirely. This fixes it.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
As a result of implementation details, 'git rebase' could
previously only preserve merges in interactive mode. That
limitation was hard for users to understand and awkward to
explain.
This patch works around it by running the interactive rebase
helper git-rebase--interactive with GIT_EDITOR set to ':'
when the user passes "-p" but not "-i" to the rebase command.
The effect is that the interactive rebase helper is used but
the user never sees an editor.
The test-case included in this patch was originally written
by Stephen Habermann <stephen@exigencecorp.com>, but has
been extensively modified since its creation.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
"git rebase" without arguments on initial startup showed:
fatal: Needed a single revision
invalid upstream
This patch makes it show the ordinary usage string.
If .git/rebase-merge or .git/rebase-apply/rebasing exists, git-rebase
will die with a message saying that a rebase is in progress and the user
should try --skip/--abort/--continue.
If .git/rebase-apply/applying exists, git-rebase will die with a message
saying that git-am is in progress, regardless how many arguments are
given.
If no arguments are given and .git/rebase-apply/ exists, but neither a
rebasing nor applying file is in that directory, git-rebase dies with a
message saying that rebase-apply exists and no arguments were given.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With git-am, it sounds awkward to have the patches in ".git/rebase/",
but for technical reasons, we have to keep the same directory name
for git-am and git-rebase. ".git/rebase-apply" seems to be a good
compromise.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rs/rebase-checkout-not-so-quiet:
git-rebase: report checkout failure
Conflicts:
git-rebase.sh
|
|
Since the files generated and used during a rebase are never to be
tracked, they should live in $GIT_DIR. While at it, avoid the rather
meaningless term "dotest" to "rebase", and unhide ".dotest-merge".
This was wished for on the mailing list, but so far unimplemented.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When detaching the HEAD to the base commit, the "git checkout" command
could fail if, for example, upstream contains a file that would overrwrite
a local, untracked file. Unconditionally discarding the standard error
stream was done to squelch the progress and notices back when checkout
did not have -q option, but there is no reason to keep doing it anymore.
Noticed by Robert Shearman.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"merge" and "reset" leave the original point in history in ORIG_HEAD,
which makes it easy to go back to where you were before you inflict a
major damage to your history and realize that you do not like the result
at all. These days with reflog, we technically do not need to use
ORIG_HEAD, but it is a handy way nevertheless.
This teaches "am" and "rebase" (all forms --- the vanilla one that uses
"am" as its backend, "-m" variant that cherry-picks, and "--interactive")
to do the same.
The original idea and a partial implementation to do this only for "rebase
-m" was by Brian Gernhardt; this extends on his idea.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase --continue" and friends gave nonsense errors when there is no
rebase in progress.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When rebasing or stashing, chances are that you do not care about
dirty submodules, since they are not updated by those actions anyway.
So ignore the submodules' states.
Note: the submodule states -- as committed in the superproject --
will still be stashed and rebased, it is _just_ the state of the
submodule in the working tree which is ignored.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* bd/tests:
Rename the test trash directory to contain spaces.
Fix tests breaking when checkout path contains shell metacharacters
Don't use the 'export NAME=value' in the test scripts.
lib-git-svn.sh: Fix quoting issues with paths containing shell metacharacters
test-lib.sh: Fix some missing path quoting
Use test_set_editor in t9001-send-email.sh
test-lib.sh: Add a test_set_editor function to safely set $VISUAL
git-send-email.perl: Handle shell metacharacters in $EDITOR properly
config.c: Escape backslashes in section names properly
git-rebase.sh: Fix --merge --abort failures when path contains whitespace
Conflicts:
t/t9115-git-svn-dcommit-funky-renames.sh
|
|
On some shells (notably /bin/sh on FreeBSD 6.1), the
construct
foo && ! bar | baz
is true if
foo && baz
whereas for most other shells (such as bash) is true if
foo && ! baz
We can work around this by specifying
foo && ! (bar | baz)
which works everywhere.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also update t/t3407-rebase-abort.sh to expose the bug.
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This teaches "git rebase [--onto O] A B" to omit an unnecessary checkout
of branch B before it goes on.
"git-rebase" originally was about rebasing the current branch to somewhere
else, and when the extra parameter to name which branch to rebase was
added, it defined the semantics to the safest but stupid "first switch to
the named branch and then operate exactly the same way as if we were
already on that branch".
But the first thing the real part of "rebase" does is to reset the work
tree and the index to the "onto" commit. Which means the "rebase that
branch" form switched the work tree to the tip of the branch only to
immediately switch again to another commit. This was wasteful.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Start draft ReleaseNotes for 1.5.4.5
rebase -m: do not trigger pre-commit verification
Conflicts:
RelNotes
|
|
When rebasing changes that contain issues that the pre-commit hook flags
as problematic, the rebase cannot be continued. However, rebase is about
transplanting commits that are already made with as little distortion as
possible, and pre-commit check should not interfere.
Earlier, c5b09fe (Avoid update hook during git-rebase --interactive,
2007-12-19) fixed "rebase -i", but "rebase -m" shared the same issue.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, --abort would end by git resetting to ORIG_HEAD, but some
commands, such as git reset --hard (which happened in git rebase --skip,
but could just as well be typed by the user), would have already modified
ORIG_HEAD.
Just use the orig-head we store in $dotest instead.
[jc: cherry-picked from 48411d and 4947cf9 on 'master']
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Being in the project's top directory when starting or continuing a rebase
is not necessary since 533b703 (Allow whole-tree operations to be started
from a subdirectory, 2007-01-12).
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The new option --rebasing is used internally for rebase to tell am that
it is being used for its purpose. This would leave .dotest/rebasing to
help "completion" scripts tell if the ongoing operation is am or rebase.
Also the option at the same time stands for --binary, -3 and -k which
are always given when rebase drives am as its backend.
Using the information "am" leaves, git-completion.bash tells ongoing
rebase and am apart.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, --abort would end by git resetting to ORIG_HEAD, but some
commands, such as git reset --hard (which happened in git rebase --skip,
but could just as well be typed by the user), would have already modified
ORIG_HEAD.
Just use the orig-head we store in $dotest instead.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
scripts: do not get confused with HEAD in work tree
Improve description of git-branch -d and -D in man page.
|
|
When you have a file called HEAD in your work tree, many commands that
our scripts feed "HEAD" to would complain about the rev vs path
ambiguity. A solution is to form command line more carefully by
appending -- to them, which makes it clear that we mean HEAD rev not
HEAD file.
This patch would apply to maint.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mh/rebase-skip-hard:
Do git reset --hard HEAD when using git rebase --skip
|
|
* ph/parseopt-sh:
git-quiltimport.sh fix --patches handling
git-am: -i does not take a string parameter.
sh-setup: don't let eval output to be shell-expanded.
git-sh-setup: fix parseopt `eval` string underquoting
Give git-am back the ability to add Signed-off-by lines.
git-rev-parse --parseopt
scripts: Add placeholders for OPTIONS_SPEC
Migrate git-repack.sh to use git-rev-parse --parseopt
Migrate git-quiltimport.sh to use git-rev-parse --parseopt
Migrate git-checkout.sh to use git-rev-parse --parseopt --keep-dashdash
Migrate git-instaweb.sh to use git-rev-parse --parseopt
Migrate git-merge.sh to use git-rev-parse --parseopt
Migrate git-am.sh to use git-rev-parse --parseopt
Migrate git-clone to use git-rev-parse --parseopt
Migrate git-clean.sh to use git-rev-parse --parseopt.
Update git-sh-setup(1) to allow transparent use of git-rev-parse --parseopt
Add a parseopt mode to git-rev-parse to bring parse-options to shell scripts.
|
|
The --skip case was handled properly when rebasing without --merge,
but the --continue case was not.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When you have a merge conflict and want to bypass the commit causing it,
you don't want to care about the dirty state of the working tree.
Also, don't git reset --hard HEAD in the rebase-skip test, so that the
lack of support for this is detected.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The interactive version of rebase does all the operations on a detached
HEAD, so that after a successful rebase, <branch>@{1} is the pre-rebase
state. The reflogs of "HEAD" still show all the actions in detail.
This teaches the non-interactive version to do the same.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
--text follows this line--
These commands currently lack OPTIONS_SPEC; allow people to
easily list with "git grep 'OPTIONS_SPEC=$'" what they can help
improving.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-rebase used to fail when run from a path containing a space.
Signed-off-by: Jonathan del Strother <jon.delStrother@bestbefore.tv>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
git-rebase used to fail when run from a path containing a space.
Signed-off-by: Jonathan del Strother <jon.delStrother@bestbefore.tv>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* maint:
git-svn: don't attempt to spawn pager if we don't want one
Supplant the "while case ... break ;; esac" idiom
User Manual: add a chapter for submodules
user-manual: don't assume refs are stored under .git/refs
Detect exec bit in more cases.
Conjugate "search" correctly in the git-prune-packed man page.
Move the paragraph specifying where the .idx and .pack files should be
Documentation/git-lost-found.txt: drop unnecessarily duplicated name.
|
|
A lot of shell scripts contained stuff starting with
while case "$#" in 0) break ;; esac
and similar. I consider breaking out of the condition instead of the
body od the loop ugly, and the implied "true" value of the
non-matching case is not really obvious to humans at first glance. It
happens not to be obvious to some BSD shells, either, but that's
because they are not POSIX-compliant. In most cases, this has been
replaced by a straight condition using "test". "case" has the
advantage of being faster than "test" on vintage shells where "test"
is not a builtin. Since none of them is likely to run the git
scripts, anyway, the added readability should be worth the change.
A few loops have had their termination condition expressed
differently.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The extra shift here causes failure to parse any commandline including
the -C option.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Pass --whitespace=<option> to git-apply. Since git-apply and git-am
expect this, I'm always surprised when I try to give it to git-rebase
and it doesn't work.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a topic branch is rebased, some of whose commits are already
cherry-picked upstream:
o--X--A--B--Y <- master
\
A--B--Z <- topic
then 'git rebase -m master' would report:
Already applied: 0001 Y
Already applied: 0002 Y
With this fix it reports the expected:
Already applied: 0001 A
Already applied: 0002 B
As an added bonus, this change also avoids 'echo' of a commit message,
which might contain escapements.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Earlier, "git rerere" was enabled by creating the directory
.git/rr-cache. That is definitely not in line with most other
features, which are enabled by a config variable.
So, check the config variable "rerere.enabled". If it is set
to "false" explicitely, do not activate rerere, even if
.git/rr-cache exists. This should help when you want to disable
rerere temporarily.
If "rerere.enabled" is not set at all, fall back to detection
of the directory .git/rr-cache.
[jc: with minimum tweaks]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Consider this history:
o--o-...-B <- origin
\ \
x--x--M--x--x <- master
In this situation, rebase considers master fully up-to-date and would
not do anything. However, if there were additional commits on origin,
the rebase would run and move the commits x on top of origin.
Here we change rebase to short-circuit out only if the history since origin
is strictly linear. Consequently, the above as well as a history like this
would be linearized:
o--o <- origin
\
x--x
\ \
x--M--x--x <- master
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This uses the remove-dashes target to replace "git-frotz" to "git frotz".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Don't you just hate the fact sometimes, that git-rebase just applies
the patches, without any possibility to edit them, or rearrange them?
With "--interactive", git-rebase now lets you edit the list of patches,
so that you can reorder, edit and delete patches.
Such a list will typically look like this:
pick deadbee The oneline of this commit
pick fa1afe1 The oneline of the next commit
...
By replacing the command "pick" with the command "edit", you can amend
that patch and/or its commit message, and by replacing it with "squash"
you can tell rebase to fold that patch into the patch before that.
It is derived from the script sent to the list in
<Pine.LNX.4.63.0702252156190.22628@wbgn013.biozentrum.uni-wuerzburg.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The command is part of the main porcelain making git-add more
appropriate.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The rebase and merge commands used diff-tree to display the summary stats of
what files had changed from the operation. diff-tree does not read the
diff ui configuration options, so the diff.color setting was not used.
Have rebase and merge call diff rather than diff-tree, which does read the
diff ui options.
Signed-off-by: James Bowes <jbowes@dangerouslyinc.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
...and drop the last perl dependency in the script.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This simplifies the shell code, reduces its memory footprint, and
speeds things up. The performance improvements should be noticable
when git-rebase works on big commits.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When you want to amend the commit message of 3 commits before
the tip of the current branch, say 'master',
A--B--C--D--E(master)
it is sometimes handy to make your head detached at that commit
with:
$ git checkout HEAD~3 ;# check out B
$ git commit --amend ;# without modifying contents...
to create:
.B'(HEAD)
/
A--B--C--D--E(master)
and then rebase 'master' branch onto HEAD with this:
$ git rebase HEAD master
to result in:
.B'-C'-D'-E(master=HEAD)
/
A--B--C--D--E
However, the current code interprets HEAD after it switches to
the branch 'master', which means the rebase will not do
anything. You have to say something unwieldly like this
instead:
$ git rebase $(git rev-parse HEAD) master
This fixes it by expanding the $onto commit name before
switching to the target branch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Add -C[NUM] to git-am and git-rebase so that patches can be applied even
if context has changed a bit.
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
If the index wasn't clean, git-rebase would simply show the output from
git-diff-index with no further comment to the user.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|