| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Some GIT's shell script are using bare 'perl' for perl invocation.
Use @@PERL@@ symbol and replace it with PERL_PATH_SQ everywhere.
Signed-off-by: Michal Rokos <michal.rokos@nextsoft.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
commit does not always succeed, so we'll have to check for
it in the absence of set -e. This fixes a regression
introduced in 9e4bc7dd1bb9d92491c475cec55147fa0b3f954d
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
There was a time when rebase --skip didn't work when used with
--merge, but that is no more so we don't need that message
anymore.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Some implementations of "expr" (e.g. FreeBSD's) fail, if an
argument starts with a dash.
Signed-off-by: Dennis Stosberg <dennis@stosberg.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Now that we control the merge base selection, we won't be forced
into rolling things in that we wanted to skip beforehand.
Also, add a test to ensure this all works as intended.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We no longer have to recommit each patch to remove the parent
information we're rebasing since we're using the low-level merge
strategies directly instead of git-merge.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Enhance t3401-rebase-partial to test with --merge as well as
the standard am -3 strategy.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Instead of using 4-digit numbers to name commits being rebased,
just use "cmt.$msgnum" string, with $msgnum as a decimal number
without leading zero padding. This makes it possible to rebase
more than 9999 commits, but of more practical importance is that
the earlier code used "printf" to format already formatted
$msgnum and barfed when it counted up to 0008. In other words,
the old code was incapable of rebasing more than 7 commits, and
this fixes that problem.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
recursive merge relies on Python, and we can't perform
rename-aware merges without the recursive merge. So bail out
before trying it.
The test won't work w/o recursive merge, either, so skip that,
too.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This solves the problem of rebasing local commits against an
upstream that has renamed files.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
git rebase [--onto <newbase>] <upstream> [<branch>]
git rebase --continue
git rebase --abort
Add "--continue" to restart the rebase process after
manually resolving conflicts. The user is warned if
there are still differences between the index and the
working files.
Add "--abort" to restore the original branch, and
remove the .dotest working files.
Some minor additions to the git-rebase documentation.
[jc: fix that applies to the maintenance track has been dealt
with separately.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Noticed by Sean.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Some words, e.g., `match', are special to expr(1), and cause strange
parsing effects. Track down all uses of expr and mangle the arguments
so that this isn't a problem.
Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
s/upsteram/upstream in git-rebase.sh.
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
I found a paper thin man page for git-rebase, but was quite happy to
see something much more useful in the usage statement of the script
when I went there to find out how this thing worked. Here it is
cleaned up slightly and expanded a bit into the actual documentation.
Signed-off-by: Carl Worth <cworth@cworth.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* jc/rebase-limit:
rebase: allow rebasing onto different base.
|
|
This allows you to rewrite history a bit more flexibly, by
separating the other branch name and new branch point. By
default, the new branch point is the same as the tip of the
other branch as before, but you can specify where you graft the
rebased branch onto.
When you have this ancestry graph:
A---B---C topic
/
D---E---F---G master
$ git rebase --onto master~1 master topic
would rewrite the history to look like this:
A'\''--B'\''--C'\'' topic
/
D---E---F---G master
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This lets a hook to interfere a rebase and help prevent certain
branches from being rebased by mistake. A sample hook to show
how to prevent a topic branch that has already been merged into
publish branch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Fix bugs in git-rebase wrt rebasing another branch than
the current HEAD, rebasing with a dirty working dir,
and rebasing a proper decendant of the target branch.
[jc: with a bit of hand-merging]
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When switching to another branch and rebasing it in a one-go, it
failed to update the variable that holds the branch head, and
did not detect fast-forward situation correctly.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When a .dotest from a previously failed rebase or patch
application exists, rebase got confused and tried to apply
mixture of what was already there and what is being rebased.
Check the existence of the directory and barf.
It failed with an mysterious "fatal: cannot read mbox" message
if the branch being rebased is fully in sync with the base.
Also if the branch is a proper descendant of the base, there is
no need to run rebase logic. Prevent these from happening by
checking where the merge-base is.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Now all the users of this script detect its exit status and die,
complaining that it is outside git repository. So move the code
that dies from all callers to git-sh-setup script.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The current rebase implementation finds commits in our tree but
not in the upstream tree using git-cherry, and tries to apply
them using git-cherry-pick (i.e. always use 3-way) one by one.
Which is fine, but when some of the changes do not apply
cleanly, it punts, and punts badly.
Suppose you have commits A-B-C-D-E since you forked from the
upstream and submitted the changes for inclusion. You fetch
from upstream head U and find that B has been picked up. You
run git-rebase to update your branch, which tries to apply
changes contained in A-C-D-E, in this order, but replaying of C
fails, because the upstream got changes that touch the same area
from elsewhere.
Now what?
It notes that fact, and goes ahead to apply D and E, and at the
very end tells you to deal with C by hand. Even if you somehow
managed to replay C on top of the result, you would now end up
with ...-B-...-U-A-D-E-C.
Breaking the order between B and others was the conscious
decision made by the upstream, so we would not worry about it,
and even if it were worrisome, it is too late for us to fix now.
What D and E do may well depend on having C applied before them,
which is a problem for us.
This rewrites rebase to use git-format-patch piped to git-am,
and when the patch does not apply, have git-am fall back on
3-way merge. The updated diff/patch pair knows how to apply
trivial binary patches as long as the pre- and post-images are
locally available, so this should work on a repository with
binary files as well.
The primary benefit of this change is that it makes rebase
easier to use when some of the changes do not replay cleanly.
In the "unapplicable patch in the middle" case, this "rebase"
works like this:
- A series of patches in e-mail form is created that records
what A-C-D-E do, and is fed to git-am. This is stored in
.dotest/ directory, just like the case you tried to apply
them from your mailbox. Your branch is rewound to the tip of
upstream U, and the original head is kept in .git/ORIG_HEAD,
so you could "git reset --hard ORIG_HEAD" in case the end
result is really messy.
- Patch A applies cleanly. This could either be a clean patch
application on top of rewound head (i.e. same as upstream
head), or git-am might have internally fell back on 3-way
(i.e. it would have done the same thing as git-cherry-pick).
In either case, a rebased commit A is made on top of U.
- Patch C does not apply. git-am stops here, with conflicts to
be resolved in the working tree. Yet-to-be-applied D and E
are still kept in .dotest/ directory at this point. What the
user does is exactly the same as fixing up unapplicable patch
when running git-am:
- Resolve conflict just like any merge conflicts.
- "git am --resolved --3way" to continue applying the patches.
- This applies the fixed-up patch so by definition it had
better apply. "git am" knows the patch after the fixed-up
one is D and then E; it applies them, and you will get the
changes from A-C-D-E commits on top of U, in this order.
I've been using this without noticing any problem, and as people
may know I do a lot of rebases.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This uses the git-update-ref command in scripts for safer updates.
Also places where we used to read HEAD ref by using "cat" were fixed
to use git-rev-parse. This will matter when we start using symbolic
references.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
As promised, this is the "big tool rename" patch. The primary differences
since 0.99.6 are:
(1) git-*-script are no more. The commands installed do not
have any such suffix so users do not have to remember if
something is implemented as a shell script or not.
(2) Many command names with 'cache' in them are renamed with
'index' if that is what they mean.
There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support is expected to be removed in the near
future.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Michal Rokos
Eric Wong
Dennis Stosberg
Junio C Hamano
Sean
Mark Wooding
Jason Riedy
Carl Worth
Lukas Sandström
freku045@student.liu.se