| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git rebase", especially when it is run by mistake and ends up
trying to replay many changes, spent long time in silence. The
command has been taught to show progress report when it spends
long time preparing these many changes to replay (which would give
the user a chance to abort with ^C).
* kw/rebase-progress:
rebase: turn on progress option by default for format-patch
format-patch: have progress option while generating patches
|
|
Pass the "--progress" option to format-patch when the standard error
stream is connected to the terminal and "--quiet" is not given.
Signed-off-by: Kevin Willford <kewillf@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The git UI can be improved by addressing the error messages to those
they help: inexperienced and casual git users. To this intent, it is
helpful to make sure the terms used in those messages can be understood
by this segment of users, and that they guide them to resolve the
problem.
In particular, failure to apply a patch during a git rebase is a common
problem that can be very destabilizing for the inexperienced user. It is
important to lead them toward the resolution of the conflict (which is a
3-steps process, thus complex) and reassure them that they can escape a
situation they can't handle with "--abort". This commit answer those two
points by detailling the resolution process and by avoiding cryptic git
linguo.
Signed-off-by: William Duclot <william.duclot@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a recent regression to "git rebase -i" and add tests that would
have caught it and others.
* pw/rebase-i-regression-fix-tests:
t3420: fix under GETTEXT_POISON build
rebase: add more regression tests for console output
rebase: add regression tests for console output
rebase -i: add test for reflog message
sequencer: print autostash messages to stderr
|
|
The rebase messages are printed to stderr traditionally. However due
to a bug introduced in 587947750bd (rebase: implement --[no-]autostash
and rebase.autostash, 2013-05-12) which was faithfully copied when
reimplementing parts of the interactive rebase in the sequencer the
autostash messages are printed to stdout instead.
It is time to fix that: let's print the autostash messages to stderr
instead of stdout.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase" learns "--signoff" option.
* gb/rebase-signoff:
rebase: pass --[no-]signoff option to git am
builtin/am: fold am_signoff() into am_append_signoff()
builtin/am: honor --signoff also when --rebasing
|
|
This makes it easy to sign off a whole patchset before submission.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase" learned "--quit" option, which allows a user to
remove the metadata left by an earlier "git rebase" that was
manually aborted without using "git rebase --abort".
* nd/rebase-forget:
rebase: add --quit to cleanup rebase, leave everything else untouched
|
|
There are occasions when you decide to abort an in-progress rebase and
move on to do something else but you forget to do "git rebase --abort"
first. Or the rebase has been in progress for so long you forgot about
it. By the time you realize that (e.g. by starting another rebase)
it's already too late to retrace your steps. The solution is normally
rm -r .git/<some rebase dir>
and continue with your life. But there could be two different
directories for <some rebase dir> (and it obviously requires some
knowledge of how rebase works), and the ".git" part could be much
longer if you are not at top-dir, or in a linked worktree. And
"rm -r" is very dangerous to do in .git, a mistake in there could
destroy object database or other important data.
Provide "git rebase --quit" for this use case, mimicking a precedent
that is "git cherry-pick --quit".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Positional arguments, such as $0, $1, etc, need to be stored on shell
variables for use in translatable strings, according to gettext manual
[1].
Add git-sh-setup.sh to LOCALIZED_SH variable in Makefile to enable
extraction of string marked for translation by xgettext.
Source git-sh-i18n in git-sh-setup.sh for gettext support.
git-sh-setup.sh is a shell library to be sourced by other shell scripts.
In order to avoid other scripts from sourcing git-sh-i18n twice, remove
line that sources it from them. Not sourcing git-sh-i18n in any script
that uses gettext would lead to failure due to, for instance, gettextln
not being found.
[1] http://www.gnu.org/software/gettext/manual/html_node/Preparing-Shell-Scripts.html
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark placeholder "<branch>" in git-rebase.sh for translation. The string
containing the named placeholder is passed to shell function
error_on_missing_default_upstream in git-parse-remote.sh which uses it
to display a command hint for the user.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The string message marked for translation should use eval_gettext
variant instead of the gettext one, since we want to dollar-substitute
$head_name in the result.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git commit-tree" plumbing command required the user to always sign
its result when the user sets the commit.gpgsign configuration
variable, which was an ancient mistake. Rework "git rebase" that
relied on this mistake so that it reads commit.gpgsign and pass (or
not pass) the -S option to "git commit-tree" to keep the end-user
expectation the same, while teaching "git commit-tree" to ignore
the configuration variable. This will stop requiring the users to
sign commit objects used internally as an implementation detail of
"git stash".
* jc/commit-tree-ignore-commit-gpgsign:
commit-tree: do not pay attention to commit.gpgsign
|
|
ba3c69a9 (commit: teach --gpg-sign option, 2011-10-05) introduced a
"signed commit" by teaching the --[no]-gpg-sign option and the
commit.gpgsign configuration variable to various commands that
create commits.
Teaching these to "git commit" and "git merge", both of which are
end-user facing Porcelain commands, was perfectly fine. Allowing
the plumbing "git commit-tree" to suddenly change the behaviour to
surprise the scripts by paying attention to commit.gpgsign was not.
Among the in-tree scripts, filter-branch, quiltimport, rebase and
stash are the commands that run "commit-tree". If any of these
wants to allow users to always sign every single commit, they should
offer their own configuration (e.g. "filterBranch.gpgsign") with an
option to disable signing (e.g. "git filter-branch --no-gpgsign").
Ignoring commit.gpgsign option _obviously_ breaks the backward
compatibility, but it is easy to follow the standard pattern in
scripts to honor whatever configuration variable they choose to
follow. E.g.
case $(git config --bool commit.gpgsign) in
true) sign=-S ;;
*) sign= ;;
esac &&
git commit-tree $sign ...whatever other args...
Do so to make sure that "git rebase" keeps paying attention to the
configuration variable, which unfortunately is a documented mistake.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the later steps of preparing a patch series I do not want to
edit or reorder the patches any more, but just make sure the
test suite passes after each patch and also to fix breakage
right there if some of the steps fail. I could run
EDITOR=true git rebase -i <anchor> -x "make test"
but it would be simpler if it can be spelled like so:
git rebase <anchor> -x "make test"
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase", unlike all other callers of "gc --auto", did not
ignore the exit code from "gc --auto".
* jk/ok-to-fail-gc-auto-in-rebase:
rebase: ignore failures from "gc --auto"
|
|
After rebasing, we call "gc --auto" to clean up if we
created a lot of loose objects. However, we do so inside an
&&-chain. If "gc --auto" fails (e.g., because a previous
background gc blocked us by leaving "gc.log" in place),
then:
1. We will fail to clean up the state directory, leaving
the user stuck in the rebase forever (even "git am
--abort" doesn't work, because it calls "gc --auto"!).
2. In some cases, we may return a bogus exit code from
rebase, indicating failure when everything except the
auto-gc succeeded.
We can fix this by ignoring the exit code of "gc --auto".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There was no way to defeat a configured rebase.autostash variable
from the command line, as "git rebase --no-autostash" was missing.
* jk/rebase-no-autostash:
Documentation/git-rebase: fix --no-autostash formatting
rebase: support --no-autostash
|
|
This is documented as an option but we don't actually accept it.
Support it so that it is possible to override the "rebase.autostash"
config variable.
Reported-by: Daniel Hahler <genml+git-2014@thequod.de>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase --quiet" was not quite quiet when there is nothing to
do.
* jk/rebase-quiet-noop:
rebase: silence "git checkout" for noop rebase
|
|
"git rebase --quiet" was not quite quiet when there is nothing to
do.
* jk/rebase-quiet-noop:
rebase: silence "git checkout" for noop rebase
|
|
When the branch to be rebased is already up to date, we
"git checkout" the branch, print an "up to date" message,
and end the rebase early. However, our checkout may print
"Switched to branch 'foo'" or "Already on 'foo'", even if
the user has asked for "--quiet".
We should avoid printing these messages at all, "--quiet" or
no. Since the rebase is a noop, this checkout can be seen as
optimizing out these other two checkout operations (that
happen in a real rebase):
1. Moving to the detached HEAD to start the rebase; we
always feed "-q" to checkout there, and instead rely on
our own custom message (which respects --quiet).
2. Finishing a rebase, where we move to the final branch.
Here we actually use update-ref rather than
git-checkout, and produce no messages.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If $GIT_COMMON_DIR is set, it should be $GIT_COMMON_DIR/hooks/, not
$GIT_DIR/hooks/. Just let rev-parse --git-path handle it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the `--fork-point` argument was added to `git rebase`, we changed
the value of $upstream to be the fork point instead of the point from
which we want to rebase. When $orig_head..$upstream is empty this does
not change the behaviour, but when there are new changes in the upstream
we are no longer checking if any of them are patch-identical with
changes in $upstream..$orig_head.
Fix this by introducing a new variable to hold the fork point and using
this to restrict the range as an extra (negative) revision argument so
that the set of desired revisions becomes (in fork-point mode):
git rev-list --cherry-pick --right-only \
$upstream...$orig_head ^$fork_point
This allows us to correctly handle the scenario where we have the
following topology:
C --- D --- E <- dev
/
B <- master@{1}
/
o --- B' --- C* --- D* <- master
where:
- B' is a fixed-up version of B that is not patch-identical with B;
- C* and D* are patch-identical to C and D respectively and conflict
textually if applied in the wrong order;
- E depends textually on D.
The correct result of `git rebase master dev` is that B is identified as
the fork-point of dev and master, so that C, D, E are the commits that
need to be replayed onto master; but C and D are patch-identical with C*
and D* and so can be dropped, so that the end result is:
o --- B' --- C* --- D* --- E <- dev
If the fork-point is not identified, then picking B onto a branch
containing B' results in a conflict and if the patch-identical commits
are not correctly identified then picking C onto a branch containing D
(or equivalently D*) results in a conflict.
This change allows us to handle both of these cases, where previously we
either identified the fork-point (with `--fork-point`) but not the
patch-identical commits *or* (with `--no-fork-point`) identified the
patch-identical commits but not the fact that master had been rewritten.
Reported-by: Ted Felix <ted@tedfelix.com>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The autostash mode of "git rebase -i" did not restore the dirty
working tree state if the user aborted the interactive rebase by
emptying the insn sheet.
* rr/rebase-autostash-fix:
rebase -i: test "Nothing to do" case with autostash
rebase -i: handle "Nothing to do" case with autostash
|
|
* rr/rebase-autostash-fix:
rebase -i: test "Nothing to do" case with autostash
rebase -i: handle "Nothing to do" case with autostash
|
|
Adjust shell scripts to use $(cmd) instead of `cmd`.
* ep/shell-command-substitution: (41 commits)
t5000-tar-tree.sh: use the $( ... ) construct for command substitution
t4204-patch-id.sh: use the $( ... ) construct for command substitution
t4119-apply-config.sh: use the $( ... ) construct for command substitution
t4116-apply-reverse.sh: use the $( ... ) construct for command substitution
t4057-diff-combined-paths.sh: use the $( ... ) construct for command substitution
t4038-diff-combined.sh: use the $( ... ) construct for command substitution
t4036-format-patch-signer-mime.sh: use the $( ... ) construct for command substitution
t4014-format-patch.sh: use the $( ... ) construct for command substitution
t4013-diff-various.sh: use the $( ... ) construct for command substitution
t4012-diff-binary.sh: use the $( ... ) construct for command substitution
t4010-diff-pathspec.sh: use the $( ... ) construct for command substitution
t4006-diff-mode.sh: use the $( ... ) construct for command substitution
t3910-mac-os-precompose.sh: use the $( ... ) construct for command substitution
t3905-stash-include-untracked.sh: use the $( ... ) construct for command substitution
t1050-large.sh: use the $( ... ) construct for command substitution
t1020-subdirectory.sh: use the $( ... ) construct for command substitution
t1004-read-tree-m-u-wf.sh: use the $( ... ) construct for command substitution
t1003-read-tree-prefix.sh: use the $( ... ) construct for command substitution
t1002-read-tree-m-u-2way.sh: use the $( ... ) construct for command substitution
t1001-read-tree-m-2way.sh: use the $( ... ) construct for command substitution
...
|
|
When a user invokes
$ git rebase -i @~3
with dirty files and rebase.autostash turned on, and exits the $EDITOR
with an empty buffer, the autostash fails to apply. Although the primary
focus of rr/rebase-autostash was to get the git-rebase--backend.sh
scripts to return control to git-rebase.sh, it missed this case in
git-rebase--interactive.sh. Since this case is unlike the other cases
which return control for housekeeping, assign it a special return status
and handle that return value explicitly in git-rebase.sh.
Reported-by: Karen Etheridge <ether@cpan.org>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Work around /bin/sh that does not like "return" at the top-level
of a file that is dot-sourced from inside a function definition.
* km/avoid-non-function-return-in-rebase:
Revert "rebase: fix run_specific_rebase's use of "return" on FreeBSD"
rebase: avoid non-function use of "return" on FreeBSD
|
|
This reverts commit 99855ddf4bd319cd06a0524e755ab1c1b7d39f3b.
The workaround 99855ddf introduced to deal with problematic
"return" statements in scripts run by "dot" commands located
inside functions only handles one part of the problem. The
issue has now been addressed by not using "return" statements
in this way in the git-rebase--*.sh scripts.
This workaround is therefore no longer necessary, so clean
up the code by reverting it.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* bg/rebase-off-of-previous-branch:
rebase: allow "-" short-hand for the previous branch
|
|
Teach rebase the same shorthand as checkout and merge to name the
branch to rebase the current branch on; that is, that "-" means "the
branch we were previously on".
Requested-by: Tim Chase <git@tim.thechases.com>
Signed-off-by: Brian Gesiak <modocache@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is no functional change. The reason for this change is to be able
to add a new option taking an optional argument.
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The -M option does not exist in OPTIONS_SPEC, so there is no use to try
to find it.
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove a check on the number of arguments for --onto and -x options.
It is not possible for $# to be <= 2 at this point :
- if --onto or -x has an argument, git rev-parse --parseopt will
provide something like this :
set -- --onto 'x' --
when parsing the "--onto" option, $# will be 3 or more if there are
other options.
- if --onto or -x doesn't have an argument, git rev-parse --parseopt
will exit with an error and display usage information.
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the variable $OPTIONS_STUCKLONG is not empty, then rev-parse
option parsing is done in --stuck-long mode.
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When no arguments are specified, $switch_to is empty so we end up
passing the empty string to "git merge-base --fork-point", which causes
an error. git-rebase carries on at this point, but in fact we have
failed to apply the fork-point operation.
It turns out that the test in t3400 that was meant to test this didn't
actually need the fork-point behaviour, so enhance it to make sure that
the fork-point is applied correctly. The modified test fails without
the change to git-rebase.sh in this patch.
Reported-by: Andreas Krey <a.krey@gmx.de>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 15a147e (rebase: use @{upstream} if no upstream specified,
2011-02-09) says:
Make it default to 'git rebase @{upstream}'. That is also what
'git pull [--rebase]' defaults to, so it only makes sense that
'git rebase' defaults to the same thing.
but that isn't actually the case. Since commit d44e712 (pull: support
rebased upstream + fetch + pull --rebase, 2009-07-19), pull has actually
chosen the most recent reflog entry which is an ancestor of the current
branch if it can find one.
Add a '--fork-point' argument to git-rebase that can be used to trigger
this behaviour. This option is turned on by default if no non-option
arguments are specified on the command line, otherwise we treat an
upstream specified on the command-line literally.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Work around a bug in FreeBSD shell that caused a regression to "git
rebase" in v1.8.4. May need to be later applied to 'maint'.
* mm/rebase-continue-freebsd-WB:
rebase: fix run_specific_rebase's use of "return" on FreeBSD
|
|
Since a1549e10, git-rebase--am.sh uses the shell's "return" statement, to
mean "return from the current file inclusion", which is POSIXly correct,
but badly interpreted on FreeBSD, which returns from the current
function, hence skips the finish_rebase statement that follows the file
inclusion.
Make the use of "return" portable by using the file inclusion as the last
statement of a function.
Reported-by: Christoph Mallon <christoph.mallon@gmx.de>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rr/rebase-autostash:
git-rebase: fix typo
|
|
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase [-i]" used to leave just "rebase" as its reflog message
for some operations. This rewords them to be more informative.
* rr/rebase-reflog-message-reword:
rebase -i: use a better reflog message
rebase: use a better reflog message
|
|
Finishing touches for the "git rebase --autostash" feature
introduced earlier.
* rr/rebase-stash-store:
rebase: use 'git stash store' to simplify logic
stash: introduce 'git stash store'
stash: simplify option parser for create
stash doc: document short form -p in synopsis
stash doc: add a warning about using create
|
|
Allow various commit objects to be given to "git rebase" by ':/look
for this string' syntax, e.g. "git rebase --onto ':/there'".
* rr/rebase-sha1-by-string-query:
rebase: use peel_committish() where appropriate
sh-setup: add new peel_committish() helper
t/rebase: add failing tests for a peculiar revision
|
|
Now that the "checkout" invoked internally from "rebase" knows to
honor GIT_REFLOG_ACTION, we can start to use it to write a better
reflog message when "rebase anotherbranch", "rebase --onto branch",
etc. internally checks out the new fork point. We will write:
rebase: checkout master
instead of the old
rebase
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
rebase has no reason to know about the implementation of the stash. In
the case when applying the autostash results in conflicts, replace the
relevant code in finish_rebase () to simply call 'git stash store'.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The revisions specified on the command-line as <onto> and <upstream>
arguments could be of the form :/quuxery; so, use peel_committish() to
resolve them. The failing tests in t/rebase and t/rebase-interactive
now pass.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Kevin Willford
William Duclot
Johannes Schindelin
Giuseppe Bilotta
Nguyễn Thái Ngọc Duy
Vasco Almeida
Stefan Beller
Jeff King
John Keeping
Ramkumar Ramachandra
Elia Pinto
Kyle J. McKay
Brian Gesiak
Nicolas Vigier
Matthieu Moy
Ralf Thielow