| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git rebase -i" now honors --strategy and -X options.
* af/rebase-i-merge-options:
Do not ignore merge options in interactive rebase
|
|
Merge strategy and its options can be specified in `git rebase`,
but with `--interactive`, they were completely ignored.
Signed-off-by: Arnaud Fontaine <arnau@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In rebase -i --autosquash, ignore all "fixup! " or "squash! " after the
first. This supports the case when a git commit --fixup/--squash referred
to an earlier fixup/squash instead of the original commit (whether
intentionally, as when the user expressly meant to note that the commit
fixes an earlier fixup; or inadvertently, as when the user meant to refer to
the original commit with :/msg; or out of laziness, as when the user could
remember how to refer to the fixup but not the original).
In the todo list, the full commit message is preserved, in case it provides
useful cues to the user. A test helper set_cat_todo_editor is introduced to
check this.
Helped-by: Thomas Rast <trast@inf.ethz.ch>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Andrew Pimlott <andrew@pimlott.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Return control to the caller git-rebase.sh to get these two tasks
rm -fr "$dotest"
git gc --auto
done by it.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for a later patch that will create $state_dir/autostash
in git-rebase.sh before anything else can happen, change a `mkdir
$state_dir` call to `mkdir -p $state_dir`. The change is safe,
because this is not a test to detect an in-progress rebase (that is
already done much earlier in git-rebase.sh).
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a rebase stops (e.g. interrupted by a merge conflict), it could
be useful to know how far a rebase has progressed and how many
commits in total this rebase will apply. Teach the __git_ps1()
command to display the number of commits so far applied and the
total number of commits to be applied, like this:
((3ec0a6a...)|REBASE 2/5)
In the example above the rebase has stopped at the second commit due to
a merge conflict and there are a total number of five commits to be
applied by this rebase.
This information can be already obtained from the following files which are
being generated during the rebase:
GIT_DIR/.git/rebase-merge/msgnum (git-rebase--merge.sh)
GIT_DIR/.git/rebase-merge/end (git-rebase--merge.sh)
GIT_DIR/.git/rebase-apply/next (git-am.sh)
GIT_DIR/.git/rebase-apply/last (git-am.sh)
but "rebase -i" does not leave necessary clues.
Implement this feature by doing these three things:
1) Modify git-rebase--interactive.sh to also create
GIT_DIR/.git/rebase-merge/msgnum
GIT_DIR/.git/rebase-merge/end
files for the number of commits so far applied and the total
number of commits to be applied.
2) Modify git-prompt.sh to read and display info from the above
files.
3) Update test t9903-bash-prompt.sh to reflect changes introduced
by this patch.
Signed-off-by: Zoltan Klinger <zoltan.klinger@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Finishing touches to the earlier core.commentchar topic to cover
"rebase -i" as well.
* jk/rebase-i-comment-char:
rebase -i: respect core.commentchar
|
|
Commit eff80a9 (Allow custom "comment char") introduced a custom comment
character for commit messages but did not teach git-rebase--interactive
to use it.
Change git-rebase--interactive to read core.commentchar and use its
value when generating commit messages and for the command list.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An earlier change to add --keep-empty option broke "git rebase
--preserve-merges" and lost merge commits that end up being the
same as its parent.
* ph/rebase-preserve-all-merges:
rebase --preserve-merges: keep all merge commits including empty ones
|
|
Since 90e1818f9a (git-rebase: add keep_empty flag, 2012-04-20)
'git rebase --preserve-merges' fails to preserve empty merge commits
unless --keep-empty is also specified. Merge commits should be
preserved in order to preserve the structure of the rebased graph,
even if the merge commit does not introduce changes to the parent.
Teach rebase not to drop merge commits only because they are empty.
A special case which is not handled by this change is for a merge commit
whose parents are now the same commit because all the previous different
parents have been dropped as a result of this rebase or some previous
operation.
Signed-off-by: Phil Hord <hordp@cisco.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach an option to edit the insn sheet to "git rebase -i".
* aw/rebase-i-edit-todo:
rebase -i: suggest using --edit-todo to fix an unknown instruction
rebase -i: Add tests for "--edit-todo"
rebase -i: Teach "--edit-todo" action
rebase -i: Refactor help messages for todo file
rebase usage: subcommands can not be combined with -i
|
|
We have now an explicit UI to edit the todo sheet and need not disclose
the name of the file.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the todo sheet of interactive rebase instructs to run a non-existing
command, the operation stops with the following error:
Execution failed: no-such
You can fix the problem, and then run
git rebase --continue
fatal: 'rebase' appears to be a git command, but we were not
able to execute it. Maybe git-rebase is broken?
The reason is that the shell that attempted to run the command exits with
code 127. rebase--interactive just forwards this code to the caller (the
git wrapper). But our smart run-command infrastructure detects this
special exit code and turns it into ENOENT, which in turn is interpreted
by the git wrapper as if the external command that it just executed did
not exist. This is finally translated to the misleading last two lines in
error message cited above.
Fix it by translating the error code before it is forwarded.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows users to edit the todo file while they're stopped in the
middle of an interactive rebase. When this action is executed, all
comments from the original todo file are stripped, and new help messages
are appended to the end.
Signed-off-by: Andrew Wong <andrew.kw.w@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Andrew Wong <andrew.kw.w@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.7.11:
Almost 1.7.11.6
gitweb: URL-decode $my_url/$my_uri when stripping PATH_INFO
rebase -i: use full onto sha1 in reflog
sh-setup: protect from exported IFS
receive-pack: do not leak output from auto-gc to standard output
t/t5400: demonstrate breakage caused by informational message from prune
setup: clarify error messages for file/revisions ambiguity
send-email: improve RFC2047 quote parsing
fsck: detect null sha1 in tree entries
do not write null sha1s to on-disk index
diff: do not use null sha1 as a sentinel value
|
|
The reflog entries left by "git rebase" and "git rebase -i" were
inconsistent (the interactive one gave an abbreviated object name).
* mg/rebase-i-onto-reflog-in-full:
rebase -i: use full onto sha1 in reflog
|
|
The reflog entries left by "git rebase" and "git rebase -i" were
inconsistent.
* mg/rebase-i-onto-reflog-in-full:
rebase -i: use full onto sha1 in reflog
|
|
'git rebase' uses the full onto sha1 for the reflog message whereas 'git
rebase -i' uses the short sha1. This is not only inconsistent, but can
lead to problems when the reflog is inspected at a later time at which
that abbreviation may have become ambiguous.
Make 'rebase -i' use the full onto sha1, as well.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Finishing touches to the "rebase -i --root" (new feature for
1.7.12).
* cw/rebase-i-root:
rebase -i: handle fixup of root commit correctly
|
|
There is a bug with git rebase -i --root when a fixup or squash line is
applied to the new root. We attempt to amend the commit onto which they
apply with git reset --soft HEAD^ followed by a normal commit. Unlike a
real commit --amend, this sequence will fail against a root commit as it
has no parent.
Fix rebase -i to use commit --amend for fixup and squash instead, and
add a test for the case of a fixup of the root commit.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase [-i] --root $tip" can now be used to rewrite all the
history down to the root.
* cw/rebase-i-root:
t3404: make test 57 work with dash and others
Add tests for rebase -i --root without --onto
rebase -i: support --root without --onto
|
|
Teach "am --rebasing" codepath to grab authorship, log message and
the patch text directly out of existing commits. This will help
rebasing commits that have confusing "diff" output in their log
messages.
* mz/rebase-no-mbox:
am: don't call mailinfo if $rebasing
am --rebasing: get patch body from commit, not from mailbox
rebase --root: print usage on too many args
rebase: don't source git-sh-setup twice
|
|
Allow --root to be specified to rebase -i without --onto, making it
possible to edit and re-order all commits right back to the root(s).
If there is a conflict to be resolved when applying the first change,
the user will expect a sane index and working tree to get sensible
behaviour from git-diff and friends, so create a sentinel commit with an
empty tree to rebase onto. Automatically squash the sentinel with any
commits rebased directly onto it, so they end up as root commits in
their own right and retain their authorship and commit message.
Implicitly use rebase -i for non-interactive rebase of --root without
an --onto argument now that rebase -i can correctly do this.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The git-sh-setup script is already sourced in git-rebase.sh before
calling into git-rebase--(am|interactive|merge).sh. There are no other
callers of these scripts. It is therefore unnecessary to source
git-sh-setup again in them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
During an interactive rebase session, it is sometimes desirable to
run tests on each commit in the resulting history. This can be done
by adding "exec <test command>" when editing the insn sheet, but the
command used for testing is often the same for all resulting commits.
By passing "--exec <cmd>" from the command line, automatically add
these "exec" lines after each commit in the final history. To work
well with the --autosquash option, these are added at the end of
each run of "fixup" and "squash".
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* nl/rebase-i-cheat-sheet:
rebase -i: remind that the lines are top-to-bottom
|
|
"git rebase" learned to optionally keep commits that do not introduce
any change in the original history.
By Neil Horman
* nh/empty-rebase:
git-rebase: add keep_empty flag
git-cherry-pick: Add test to validate new options
git-cherry-pick: Add keep-redundant-commits option
git-cherry-pick: add allow-empty option
|
|
Add a command line switch to git-rebase to allow a user the ability to specify
that they want to keep any commits in a series that are empty.
When git-rebase's type is am, then this option will automatically keep any
commit that has a tree object identical to its parent.
This patch changes the default behavior of interactive rebases as well. With
this patch, git-rebase -i will produce a revision set passed to
git-revision-editor, in which empty commits are commented out. Empty commits
may be kept manually by uncommenting them. If the new --keep-empty option is
used in an interactive rebase the empty commits will automatically all be
uncommented in the editor.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Giving "--continue" to a conflicted "rebase -i" session skipped a commit
that only results in changes to submodules.
By John Keeping
* jk/rebase-i-submodule-conflict-only:
rebase -i continue: don't skip commits that only change submodules
|
|
When git-rebase--interactive stops due to a conflict and the only change
to be committed is in a submodule, the test for whether there is
anything to be committed ignores the staged submodule change. This
leads rebase to skip creating the commit for the change.
While unstaged submodule changes should be ignored to avoid needing to
update submodules during a rebase, it is safe to remove the
--ignore-submodules option to diff-index because --cached ensures that
it is only checking the index. This was discussed in [1] and a test is
included to ensure that unstaged changes are still ignored correctly.
[1] http://thread.gmane.org/gmane.comp.version-control.git/188713
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Nelson Benitez Leon opened a discussion with a patch with this in the
note:
Hi, I was using git rebase -i for some time now and never occured to
me I could reorder the commit lines to affect the order the commits
are applied, learnt that recently from a git tutorial.
Nelson's patch was to stress the fact that the lines in the insn sheet can
be re-ordered in a much more verbose way. Let's add a one-liner reminder
and also remind that the lines in the insn sheet is read from top to
bottom, unlike the "git log" output.
Discussion-triggered-by: Nelson Benitez Leon
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* aw/rebase-i-stop-on-failure-to-amend:
rebase -i: interrupt rebase when "commit --amend" failed during "reword"
|
|
* aw/rebase-i-stop-on-failure-to-amend:
rebase -i: interrupt rebase when "commit --amend" failed during "reword"
|
|
"commit --amend" could fail in cases like the user empties the commit
message, or pre-commit failed. When it fails, rebase should be
interrupted and alert the user, rather than ignoring the error and
continue on rebasing. This also gives users a way to gracefully
interrupt a "reword" if they decided they actually want to do an "edit",
or even "rebase --abort".
Signed-off-by: Andrew Wong <andrew.kw.w@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The insn sheet used by "rebase -i" is designed to be easily editable by
any text editor, but an editor that is specifically meant for it (but
is otherwise unsuitable for editing regular text files) could be useful
by allowing drag & drop reordering in a GUI environment, for example.
The GIT_SEQUENCE_EDITOR environment variable and/or the sequence.editor
configuration variable can be used to specify such an editor, while
allowing the usual editor to be used to edit commit log messages. As
usual, the environment variable takes precedence over the configuration
variable.
It is envisioned that other "sequencer" based tools will use the same
mechanism.
Signed-off-by: Peter Oberndorfer <kumbayo84@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If "exec $cmd" touched the index or the working tree, and exited with
non-zero status, the code did not check and warn that there now are
uncommitted changes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After an "exec false" stops the rebase and gives the control back to
the user, if changes are added to the index, "rebase --continue" fails
with this message, which may technically be correct, but does not point
at the real problem:
.../git-rebase--interactive: line 774: .../.git/rebase-merge/author-script: No such file or directory
We could try auto-amending HEAD, but this goes against the logic of
.git/rebase-merge/author-script (see also the testcase 'auto-amend only
edited commits after "edit"' in t3404-rebase-interactive.sh) to
auto-amend something the user hasn't explicitely asked to edit.
Instead of doing anything automatically, detect the situation and give a
clean error message. While we're there, also clarify the error message in
case '. "$author_script"' fails, which now corresponds to really weird
senario where the author script exists but can't be read.
Test-case-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Consider this graph:
D---E (topic, HEAD)
/ /
A---B---C (master)
\
F (topic2)
and the following three commands:
1. git rebase -i -p A
2. git rebase -i -p --onto F A
3. git rebase -i -p B
Currently, (1) and (2) will pick B, D, C, and E onto A and F,
respectively. However, (3) will only pick D and E onto B, but not C,
which is inconsistent with (1) and (2). As a result, we cannot modify C
during the interactive-rebase.
The current behavior also creates a bug if we do:
4. git rebase -i -p C
In (4), E is never picked. And since interactive-rebase resets "HEAD"
to "onto" before picking any commits, D and E are lost after the
interactive-rebase.
This patch fixes the inconsistency and bug by ensuring that all children
of upstream are always picked. This essentially reverts the commit:
d80d6bc146232d81f1bb4bc58e5d89263fd228d4
When compiling the todo list, commits reachable from "upstream" should
never be skipped under any conditions. Otherwise, we lose the ability
to modify them like (3), and create a bug like (4).
Two of the tests contain a scenario like (3). Since the new behavior
added more commits for picking, these tests need to be updated to
account for the additional pick lines. A new test has also been added
for (4).
Signed-off-by: Andrew Wong <andrew.kw.w@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we finish a rebase, our detached HEAD is at the final
result. We update the original branch ref with this result,
and then point the HEAD symbolic ref at the updated branch.
We write a reflog for the branch update, but not for the
update of HEAD.
Because we're already at the final result on the detached
HEAD, moving to the branch actually doesn't change our
commit sha1 at all. So in that sense, a reflog entry would
be pointless.
However, humans do read reflogs, and an entry saying "rebase
finished: returning to refs/heads/master" can be helpful in
understanding what is going on.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* aw/maint-rebase-i-p-no-ff:
git-rebase--interactive.sh: preserve-merges fails on merges created with no-ff
Conflicts:
git-rebase--interactive.sh
|
|
'git rebase' uses 'git merge' to preserve merges (-p). This preserves
the original merge commit correctly, except when the original merge
commit was created by 'git merge --no-ff'. In this case, 'git rebase'
will fail to preserve the merge, because during 'git rebase', 'git
merge' will simply fast-forward and skip the commit. For example:
B
/ \
A---M
/
---o---O---P---Q
If we try to rebase M onto P, we lose the merge commit and this happens:
A---B
/
---o---O---P---Q
To correct this, we simply do a "no fast-forward" on all merge commits
when rebasing. Since by the time we decided to do a 'git merge' inside
'git rebase', it means there was a merge originally, so 'git merge'
should always create a merge commit regardless of what the merge
branches look like. This way, when rebase M onto P from the above
example, we get:
B
/ \
A---M
/
---o---O---P---Q
Signed-off-by: Andrew Wong <andrew.kw.w@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When git-rebase.sh recently started sourcing
git-rebase--interactive.sh instead of executing it, executable bit of
the latter file should have been turned off and it should have been
moved from SCRIPT_SH to SCRIPT_LIB in the Makefile. Its two new
siblings, git-rebase--am.sh and git-rebase--merge.sh (whose executable
bits are already off) should also be moved to SCRIPT_LIB in the
Makefile.
Reported-by: Johannes Sixt <j6t@kdbg.org>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before calling 'git cherry-pick', interactive rebase currently checks
if we are rebasing from root (if --root was passed). If we are, the
'--ff' flag to 'git cherry-pick' is omitted. However, according to the
documentation for 'git cherry-pick --ff', "If the current HEAD is the
same as the parent of the cherry-picked commit, then a fast forward to
this commit will be performed.". This should never be the case when
rebasing from root, so it should not matter whether --ff is passed, so
simplify the code by removing the condition.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 8e4a91b (rebase -i: remember the settings of -v, -s and -p when
interrupted, 2007-07-08), the variable preserve_merges (then called
PRESERVE_MERGES) was detected from the state saved in
$GIT_DIR/rebase-merge in order to be used when the rebase resumed, but
its value was never actually used. The variable's value was only used
when the rebase was initated.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a rebase is resumed, interactive rebase remembers any merge
strategy passed when the rebase was initated. Make non-interactive
rebase remember any merge strategy as well. Also make non-interactive
rebase remember any merge strategy options.
To be able to resume a rebase that was initiated with an older version
of git (older than this commit), make sure not to expect the saved
option files to exist.
Test case idea taken from Junio's 71fc224 (t3402: test "rebase
-s<strategy> -X<opt>", 2010-11-11).
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, only interactive rebase remembers the value of the '-v'
flag from the initial invocation. Make non-interactive rebase also
remember it.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extract the code for writing the state to rebase-apply/ or
rebase-merge/ when a rebase is initiated. This will make it easier to
later make both interactive and non-interactive rebase remember the
options used.
Note that non-interactive rebase stores the sha1 of the original head
in a file called orig-head, while interactive rebase stores it in a
file called head. Change this by writing to orig-head in both
cases. When reading, try to read from orig-head. If that fails, read
from head instead. This protects users who upgraded git while they had
an ongoing interactive rebase, while still making it possible to
remove the code that reads from head at some point in the future.
Helped-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Factor out the common parts of the handling of the sub commands
'--continue', '--skip' and '--abort'. The '--abort' handling can
handled completely in git-rebase.sh.
After this refactoring, the calls to git-rebase--am.sh,
git-rebase--merge.sh and git-rebase--interactive.sh will be better
aligned. There will only be one call to interactive rebase that will
shortcut the very last part of git-rebase.sh.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To make it possible to later remove the handling of --abort from
git-rebase--interactive.sh, align the implementation in git-rebase.sh
with the former by making it a bit more verbose.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Arnaud Fontaine
Andrew Pimlott
Ramkumar Ramachandra
Zoltan Klinger
John Keeping
Phil Hord
Johannes Sixt
Andrew Wong
Michael J Gruber
Chris Webb
Martin von Zweigbergk
Lucien Kong
Neil Horman
Peter Oberndorfer
Matthieu Moy
Jeff King