summaryrefslogtreecommitdiff
path: root/git-quiltimport.sh
AgeCommit message (Collapse)AuthorFilesLines
2015-09-01git-quiltimport: add commandline option --series <file>Libravatar Juerg Haefliger1-2/+14
The quilt series file doesn't have to be located in the same directory with the patches and can be named differently than 'series' as well. This patch adds a commandline option to allow for a non-standard series filename and location. Signed-off-by: Juerg Haefliger <juerg.haefliger@hp.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-02-03git-sh-setup.sh: add variable to use the stuck-long modeLibravatar Nicolas Vigier1-0/+1
If the variable $OPTIONS_STUCKLONG is not empty, then rev-parse option parsing is done in --stuck-long mode. Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org> Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-12Correct common spelling mistakes in comments and testsLibravatar Stefano Lattarini1-1/+1
Most of these were found using Lucas De Marchi's codespell tool. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-25git-quiltimport: preserve standard input to be able to read user inputLibravatar Gerrit Pape1-2/+2
When run without --author and it fails to determine an author, git quiltimport tries `read patch_author` to get user input, but standard input has been redirected to the patch series file. This commit lets quiltimport read the series file through file descriptor 3 so that the standard input is preserved. Reported by Uwe Kleine-König through http://bugs.debian.org/515910 Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-21Rename .git/rebase to .git/rebase-applyLibravatar Johannes Schindelin1-1/+1
With git-am, it sounds awkward to have the patches in ".git/rebase/", but for technical reasons, we have to keep the same directory name for git-am and git-rebase. ".git/rebase-apply" seems to be a good compromise. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-16Merge branch 'sb/dashless'Libravatar Junio C Hamano1-1/+1
* sb/dashless: Make usage strings dash-less t/: Use "test_must_fail git" instead of "! git" t/test-lib.sh: exit with small negagive int is ok with test_must_fail Conflicts: builtin-blame.c builtin-mailinfo.c builtin-mailsplit.c builtin-shortlog.c git-am.sh t/t4150-am.sh t/t4200-rerere.sh
2008-07-15Rename ".dotest/" to ".git/rebase" and ".dotest-merge" to "rebase-merge"Libravatar Johannes Schindelin1-1/+1
Since the files generated and used during a rebase are never to be tracked, they should live in $GIT_DIR. While at it, avoid the rather meaningless term "dotest" to "rebase", and unhide ".dotest-merge". This was wished for on the mailing list, but so far unimplemented. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-13Make usage strings dash-lessLibravatar Stephan Beyer1-1/+1
When you misuse a git command, you are shown the usage string. But this is currently shown in the dashed form. So if you just copy what you see, it will not work, when the dashed form is no longer supported. This patch makes git commands show the dash-less version. For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh generates a dash-less usage string now. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-12quiltimport: fix misquoting of parsed -p<num> parameterLibravatar Junio C Hamano1-2/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-09git-quiltimport: better parser to grok "enhanced" series files.Libravatar Pierre Habouzit1-3/+19
The previous parser wasn't able to grok: * empty lines; * annotated patch levels (trailing -pNNN annotations); * trailing comments. Now it understands them and uses the patch level hints as a git apply argument. Signed-off-by: Pierre Habouzit <madcoder@debian.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-28Replace instances of export VAR=VAL with VAR=VAL; export VARLibravatar Johannes Schindelin1-4/+6
It might be POSIX, but there are shells that do not like the expression 'export VAR=VAL'. To be on the safe side, rewrite them into 'VAR=VAL' and 'export VAR'. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-12git-quiltimport.sh fix --patches handlingLibravatar Andy Whitcroft1-1/+1
When converting git-quiltimport.sh to the new git-rev-part --parseopt system, the handling of --patches was broken. We inadvertantly always attempt to use '--patches' as the value. This was introduced in the following commit: commit e01fbf1a8f185bf6722e828286862a4122269ef7 Author: Pierre Habouzit <madcoder@debian.org> Date: Sun Nov 4 11:31:01 2007 +0100 Migrate git-quiltimport.sh to use git-rev-parse --parseopt Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-05Migrate git-quiltimport.sh to use git-rev-parse --parseoptLibravatar Pierre Habouzit1-23/+16
Signed-off-by: Pierre Habouzit <madcoder@debian.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-27quiltimport: Skip non-existent patchesLibravatar Dan Nicholson1-0/+4
When quiltimport encounters a non-existent patch in the series file, just skip to the next patch. This matches the behavior of quilt. Signed-off-by: Dan Nicholson <dbn.lists@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-23Supplant the "while case ... break ;; esac" idiomLibravatar David Kastrup1-1/+1
A lot of shell scripts contained stuff starting with while case "$#" in 0) break ;; esac and similar. I consider breaking out of the condition instead of the body od the loop ugly, and the implied "true" value of the non-matching case is not really obvious to humans at first glance. It happens not to be obvious to some BSD shells, either, but that's because they are not POSIX-compliant. In most cases, this has been replaced by a straight condition using "test". "case" has the advantage of being faster than "test" on vintage shells where "test" is not a builtin. Since none of them is likely to run the git scripts, anyway, the added readability should be worth the change. A few loops have had their termination condition expressed differently. Signed-off-by: David Kastrup <dak@gnu.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-14Remove useless uses of cat, and replace with filename argumentsLibravatar Josh Triplett1-3/+4
Replace uses of cat that do nothing but writing the contents of a single file to another command via pipe. [jc: Original patch from Josh was somewhat buggy and rewrote "cat $file | wc -l" to "wc -l $file", but this one should be Ok.] Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02Rewrite "git-frotz" to "git frotz"Libravatar Junio C Hamano1-6/+6
This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-04-24applymbox & quiltimport: typofix.Libravatar Junio C Hamano1-1/+1
6777c380 fixed only one of three typos introduced in an earlier patch 87ab7992. This fixes the other two. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-14git-quiltimport complaining yet still workingLibravatar Linus Torvalds1-2/+2
There were two bugs: "stop_here" doesn't exist, but the bug that causes this code to trigger in the *first* place is the wrong use of "$dotest". It should be ".dotest" This is essentially the same bug introduced by 87ab7992, one was fixed with 0d38ab25 but this was somehow left behind. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-29git-quiltimport /bin/sh-ism fixLibravatar Francis Daly1-1/+1
Bryan Wu reported /usr/local/bin/git-quiltimport: 114: Syntax error: Missing '))' Most bourne-ish shells I have here accept x=$((echo x)|cat) but all bourne-ish shells I have here accept x=$( (echo x)|cat) because $(( might mean arithmetic expansion. Signed-off-by: Francis Daly <francis@daoine.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-12builtin-mailinfo.c infrastrcture changesLibravatar Don Zickus1-0/+4
I am working on a project that required parsing through regular mboxes that didn't necessarily have patches embedded in them. I started by creating my own modified copy of git-am and working from there. Very quickly, I noticed git-mailinfo wasn't able to handle a big chunk of my email. After hacking up numerous solutions and running into more limitations, I decided it was just easier to rewrite a big chunk of it. The following patch has a bunch of fixes and features that I needed in order for me do what I wanted. Note: I'm didn't follow any email rfc papers but I don't think any of the changes I did required much knowledge (besides the boundary stuff). List of major changes/fixes: - can't create empty patch files fix - empty patch files don't fail, this failure will come inside git-am - multipart boundaries are now handled - only output inbody headers if a patch exists otherwise assume those headers are part of the reply and instead output the original headers - decode and filter base64 patches correctly - various other accidental fixes I believe I didn't break any existing functionality or compatibility (other than what I describe above, which is really only the empty patch file). I tested this through various mailing list archives and everything seemed to parse correctly (a couple thousand emails). [jc: squashed in another patch from Don's five patch series to fix the test case, as this patch exposes the bug in the test.] Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-03Assorted typo fixesLibravatar Pavel Roskin1-1/+1
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-15Replace "echo -n" with printf in shell scripts.Libravatar Jason Riedy1-1/+1
Not all echos know -n. This was causing a test failure in t5401-update-hooks.sh, but not t3800-mktag.sh for some reason. Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-11Log ref changes made by quiltimport.Libravatar Shawn Pearce1-1/+1
When importing a quilt patch to a branch which has a reflog record the update to HEAD with a log message indicating the change was made by quiltimport and what patch caused the change. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-10Fix more typos, primarily in the codeLibravatar Pavel Roskin1-1/+1
The only visible change is that git-blame doesn't understand "--compability" anymore, but it does accept "--compatibility" instead, which is already documented. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-27Fix expr usage for FreeBSDLibravatar Dennis Stosberg1-2/+2
Some implementations of "expr" (e.g. FreeBSD's) fail, if an argument starts with a dash. Signed-off-by: Dennis Stosberg <dennis@stosberg.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-18Implement a --dry-run option to git-quiltimportLibravatar Eric W. Biederman1-6/+18
Since large quilt trees like -mm can easily have patches without clear authorship information, add a --dry-run option to make the problem patches easy to find. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-18Implement git-quiltimportLibravatar Eric W. Biederman1-0/+106
Importing a quilt patch series into git is not very difficult but parsing the patch descriptions and all of the other minutia take a bit of effort to get right, so this automates it. Since git and quilt complement each other it makes sense to make it easy to go back and forth between the two. If a patch is encountered that it cannot derive the author from the user is asked. Signed-off-by: Junio C Hamano <junkio@cox.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 03:45:05 +0000