summaryrefslogtreecommitdiff
path: root/git-pull.sh
AgeCommit message (Collapse)AuthorFilesLines
2009-03-02git-pull: Allow --stat and --no-stat to be used with --rebaseLibravatar Tor Arne Vestbø1-5/+5
Forwards the --stat, --no-stat, and --summary options on to git-rebase. Signed-off-by: Tor Arne Vestbø <torarnv@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-18disallow providing multiple upstream branches to rebase, pull --rebaseLibravatar Jay Soffian1-0/+5
It does not make sense to provide multiple upstream branches to either git pull --rebase, or to git rebase, so disallow both. Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-03pull: use git rev-parse -qLibravatar Miklos Vajna1-4/+4
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-18Retain multiple -q/-v occurrences in git pullLibravatar Tuncer Ayaz1-2/+2
To support counting -q/-v options in git pull retain them by concatenating. Signed-off-by: Tuncer Ayaz <tuncer.ayaz@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-14Teach/Fix pull/fetch -q/-v optionsLibravatar Tuncer Ayaz1-3/+7
Implement git-pull --quiet and git-pull --verbose by adding the options to git-pull and fixing verbosity handling in git-fetch. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-10-17pull: allow "git pull origin $something:$current_branch" into an unborn branchLibravatar Junio C Hamano1-2/+2
Some misguided documents floating on the Net suggest this sequence: mkdir newdir && cd newdir git init git remote add origin $url git pull origin master:master "git pull" has known about misguided "pull" that lets the underlying fetch update the current branch for a long time. It also has known about "git pull origin master" into a branch yet to be born. These two workarounds however were not aware of the existence of each other and did not work well together. This fixes it. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-23Ignore dirty submodule states in "git pull --rebase"Libravatar Johannes Schindelin1-3/+3
This is a companion patch to 6848d58c(Ignore dirty submodule states during rebase and stash). Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-13Make usage strings dash-lessLibravatar Stephan Beyer1-1/+1
When you misuse a git command, you are shown the usage string. But this is currently shown in the dashed form. So if you just copy what you see, it will not work, when the dashed form is no longer supported. This patch makes git commands show the dash-less version. For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh generates a dash-less usage string now. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-22pull --rebase: exit early when the working directory is dirtyLibravatar Johannes Schindelin1-0/+5
When rebasing fails during "pull --rebase", you cannot just clean up the working directory and call "pull --rebase" again, since the remote branch was already fetched. Therefore, die early when the working directory is dirty. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-12merge, pull: add '--(no-)log' command line optionLibravatar SZEDER Gábor1-3/+5
These are the command line option equivalents of the 'merge.log' config variable. The patch also updates documentation and bash completion accordingly, and adds a test. Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-12merge, pull: introduce '--(no-)stat' optionLibravatar SZEDER Gábor1-9/+7
This option has the same effect as '--(no-)summary' (i.e. whether to show a diffsat at the end of the merge or not), and it is consistent with the '--stat' option of other git commands. Documentation, tests, and bash completion are updaed accordingly, and the old --summary option is marked as being deprected. Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-22pull: pass --strategy along to to rebaseLibravatar Jay Soffian1-1/+2
rebase supports --strategy, so pull should pass the option along to it. Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-26pull --rebase: be cleverer with rebased upstream branchesLibravatar Johannes Schindelin1-1/+11
When the upstream branch is tracked, we can detect if that branch was rebased since it was last fetched. Teach git to use that information to rebase from the old remote head onto the new remote head. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-28"git pull --tags": error out with a better message.Libravatar Junio C Hamano1-26/+40
When "git pull --tags" is run without any other arguments, the standard error message "You told me to fetch and merge stuff but there is nothing to merge! You might want to fix your config" is given. While the error may be technically correct, fixing the config would not help, as "git pull --tags" itself tells "git fetch" not to use the configured refspecs. This commit makes "git pull --tags" to issue a different error message to avoid confusion. This is merely an interim solution. In the longer term, it would be a better approach to change the semantics of --tags option to make "git fetch" and "git pull" to: (1) behave as if no --tags was given (so an explicit refspec on the command line overrides configured ones, or no explicit refspecs on the command line takes configured ones); but (2) no auto-following of tags is made even when using configured refspecs; and (3) fetch all tags as not-for-merge entries". Then we would not need to have this separate error message, as the ordinary merge will happen even with the --tags option. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-28Teach 'git pull' about --rebaseLibravatar Johannes Schindelin1-1/+10
When calling 'git pull' with the '--rebase' option, it performs a fetch + rebase instead of a fetch + merge. This behavior is more desirable than fetch + pull when a topic branch is ready to be submitted and needs to be update. fetch + rebase might also be considered a better workflow with shared repositories in any case, or for contributors to a centrally managed repository, such as WINE's. As a convenience, you can set the default behavior for a branch by defining the config variable branch.<name>.rebase, which is interpreted as a bool. This setting can be overridden on the command line by --rebase and --no-rebase. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-06scripts: Add placeholders for OPTIONS_SPECLibravatar Junio C Hamano1-0/+1
--text follows this line-- These commands currently lack OPTIONS_SPEC; allow people to easily list with "git grep 'OPTIONS_SPEC=$'" what they can help improving. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-10-29Teach git-pull about --[no-]ff, --no-squash and --commitLibravatar Lars Hjemli1-3/+11
These options are supported by git-merge, but git-pull didn't know about them. Signed-off-by: Lars Hjemli <hjemli@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-10-02Make git-pull complain and give advice when there is nothing to merge withLibravatar Federico Mena Quintero1-4/+18
Signed-off-by: Federico Mena Quintero <federico@gnu.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-23Supplant the "while case ... break ;; esac" idiomLibravatar David Kastrup1-3/+3
A lot of shell scripts contained stuff starting with while case "$#" in 0) break ;; esac and similar. I consider breaking out of the condition instead of the body od the loop ugly, and the implied "true" value of the non-matching case is not really obvious to humans at first glance. It happens not to be obvious to some BSD shells, either, but that's because they are not POSIX-compliant. In most cases, this has been replaced by a straight condition using "test". "case" has the advantage of being faster than "test" on vintage shells where "test" is not a builtin. Since none of them is likely to run the git scripts, anyway, the added readability should be worth the change. A few loops have had their termination condition expressed differently. Signed-off-by: David Kastrup <dak@gnu.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02Rewrite "git-frotz" to "git frotz"Libravatar Junio C Hamano1-8/+8
This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-05-24Add a configuration option to control diffstat after mergeLibravatar Alex Riesen1-0/+3
The diffstat can be controlled either with command-line options (--summary|--no-summary) or with merge.diffstat. The default is left as it was: diffstat is active by default. Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-15git-pull: disallow implicit merging to detached HEADLibravatar Jeff King1-2/+11
Instead, we complain to the user and suggest that they explicitly specify the remote and branch. We depend on the exit status of git-symbolic-ref, so let's go ahead and document that. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-12Allow whole-tree operations to be started from a subdirectoryLibravatar Junio C Hamano1-1/+3
This updates five commands (merge, pull, rebase, revert and cherry-pick) so that they can be started from a subdirectory. This may not actually be what we want to do. These commands are inherently whole-tree operations, and an inexperienced user may mistakenly expect a "git pull" from a subdirectory would merge only the subdirectory the command started from. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-10Disallow working directory commands in a bare repository.Libravatar Shawn O. Pearce1-0/+1
If the user tries to run a porcelainish command which requires a working directory in a bare repository they may get unexpected results which are difficult to predict and may differ from command to command. Instead we should detect that the current repository is a bare repository and refuse to run the command there, as there is no working directory associated with it. [jc: updated Shawn's original somewhat -- bugs are mine.] Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-01fail pull/merge early in the middle of conflicted mergeLibravatar Junio C Hamano1-0/+3
After a pull that results in a conflicted merge, a new user often tries another "git pull" in desperation. When the index is unmerged, merge backends correctly bail out without touching either index nor the working tree, so this does not make the wound any worse. The user will however see several lines of messsages during this process, such as "filename: needs merge", "you need to resolve your current index first", "Merging...", and "Entry ... would be overwritten by merge. Cannot merge.". They are unnecessarily alarming, and cause useful conflict messages from the first pull scroll off the top of the terminal. This changes pull and merge to run "git-ls-files -u" upfront and stop them much earlier than we currently do. Old timers may know better and would not to try pulling again before cleaning things up; this change adds extra overhead that is unnecessary for them. But this would be worth paying for to save new people from needless confusion. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-28Allow git-merge to select the default strategy.Libravatar Shawn O. Pearce1-18/+0
Now that git-merge knows how to use the pull.{twohead,octopus} configuration options to select the default merge strategy there is no reason for git-pull to do the same immediately prior to invoking git-merge. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-28Ensure `git-pull` fails if `git-merge` fails.Libravatar Shawn O. Pearce1-1/+1
If git-merge exits with a non-zero exit status so should git-pull. This way the caller of git-pull knows the task did not complete successfully simply by checking the process exit status. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-28Use GIT_REFLOG_ACTION environment variable instead.Libravatar Shawn O. Pearce1-3/+3
Junio rightly pointed out that the --reflog-action parameter was starting to get out of control, as most porcelain code needed to hand it to other porcelain and plumbing alike to ensure the reflog contained the top-level user action and not the lower-level actions it invoked. At Junio's suggestion we are introducing the new set_reflog_action function to all shell scripts, allowing them to declare early on what their default reflog name should be, but this setting only takes effect if the caller has not already set the GIT_REFLOG_ACTION environment variable. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-19Move "no merge candidate" warning into git-pullLibravatar Josef Weidendorfer1-0/+4
The warning triggered even when running "git fetch" only when resulting .git/FETCH_HEAD only contained branches marked as 'not-for-merge'. Signed-off-by: Josef Weidendorfer <weidendo@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-11-16git-pull: allow pulling into an empty repositoryLibravatar Linus Torvalds1-2/+14
We used to complain that we cannot merge anything we fetched with a local branch that does not exist yet. Just treat the case as a natural extension of fast forwarding and make the local branch'es tip point at the same commit we just fetched. After all an empty repository without an initial commit is an ancestor of any commit. [jc: I added a trivial test. We've become sloppy but we should stick to the discipline of covering new behaviour with new tests. ] Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-10-10git-pull: we say commit X, not X commit.Libravatar Junio C Hamano1-1/+1
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-11Log ref changes made by git-merge and git-pull.Libravatar Shawn Pearce1-1/+2
When git-merge updates HEAD as a result of a merge record what happened during the merge into the reflog associated with HEAD (if any). The log reports who caused the update (git-merge or git-pull, by invoking git-merge), what the remote ref names were and the type of merge process used. The merge information can be useful when reviewing a reflog for a branch such as `master` where fast forward and trivial in index merges might be common as the user tracks an upstream. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-10Log ref changes made by git-fetch and git-pull.Libravatar Shawn Pearce1-1/+1
When git-fetch updates a reference record in the associated reflog what type of update took place and who caused it (git-fetch or git-pull, by invoking git-fetch). Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-27Fix expr usage for FreeBSDLibravatar Dennis Stosberg1-1/+1
Some implementations of "expr" (e.g. FreeBSD's) fail, if an argument starts with a dash. Signed-off-by: Dennis Stosberg <dennis@stosberg.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-24git-merge --squashLibravatar Junio C Hamano1-2/+5
Some people tend to do many little commits on a topic branch, recording all the trials and errors, and when the topic is reasonably cooked well, would want to record the net effect of the series as one commit on top of the mainline, removing the cruft from the history. The topic is then abandoned or forked off again from that point at the mainline. The barebone porcelainish that comes with core git tools does not officially support such operation, but you can fake it by using "git pull --no-merge" when such a topic branch is not a strict superset of the mainline, like this: git checkout mainline git pull --no-commit . that-topic-branch : fix conflicts if any rm -f .git/MERGE_HEAD git commit -a -m 'consolidated commit log message' git branch -f that-topic-branch ;# now fully merged This however does not work when the topic branch is a fast forward of the mainline, because normal "git pull" will never create a merge commit in such a case, and there is nothing special --no-commit could do to begin with. This patch introduces a new option, --squash, to support such a workflow officially in both fast-forward case and true merge case. The user-level operation would be the same in both cases: git checkout mainline git pull --squash . that-topic-branch : fix conflicts if any -- naturally, there would be : no conflict if fast forward. git commit -a -m 'consolidated commit log message' git branch -f that-topic-branch ;# now fully merged When the current branch is already up-to-date with respect to the other branch, there truly is nothing to do, so the new option does not have any effect. This was brought up in #git IRC channel recently. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-24git-pull: abort when fmt-merge-msg fails.Libravatar Junio C Hamano1-1/+1
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-22git-pull: reword "impossible to fast-forward" message.Libravatar Junio C Hamano1-1/+7
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-22git-pull: further safety while on tracking branch.Libravatar Junio C Hamano1-1/+3
Running 'git pull' while on the tracking branch has a built-in safety valve to fast-forward the index and working tree to match the branch head, but it errs on the safe side too cautiously. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-18git-pull: run repo-config with dash form.Libravatar Junio C Hamano1-2/+2
... as discussed on the list for consistency. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-15Let merge set the default strategy.Libravatar Mark Hollomon1-7/+3
If the user does not set a merge strategy for git-pull, let git-merge calculate a default strategy. [jc: with minor stylistic tweaks] Signed-off-by: Mark Hollomon <markhollomon@comcast.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-02-12Avoid using "git-var -l" until it gets fixed.Libravatar Junio C Hamano1-4/+4
This is to be nicer to people with unusable GECOS field. "git-var -l" is currently broken in that when used by a user who does not have a usable GECOS field and has not corrected it by exporting GIT_COMMITTER_NAME environment variable it dies when it tries to output GIT_COMMITTER_IDENT (same thing for AUTHOR). "git-pull" used "git-var -l" only because it needed to get a configuration variable before "git-repo-config --get" was introduced. Use the latter tool designed exactly for this purpose. "git-sh-setup" used "git-var GIT_AUTHOR_IDENT" without actually wanting to use its value. The only purpose was to cause the command to check and barf if the repository format version recorded in the $GIT_DIR/config file is too new for us to deal with correctly. Instead, use "repo-config --get" on a random property and see if it die()s, and check if the exit status is 128 (comes from die -- missing variable is reported with exit status 1, so we can tell that case apart). Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-14Trivial usage string clean-upLibravatar freku045@student.liu.se1-11/+2
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-25git-sh-setup: die if outside git repository.Libravatar Junio C Hamano1-1/+1
Now all the users of this script detect its exit status and die, complaining that it is outside git repository. So move the code that dies from all callers to git-sh-setup script. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-09Make git-recursive the default strategy for git-pull.Libravatar Junio C Hamano1-2/+14
This does two things: - It changes the hardcoded default merge strategy for two-head git-pull from resolve to recursive. - .git/config file acquires two configuration items. pull.twohead names the strategy for two-head case, and pull.octopus names the strategy for octopus merge. IOW you are paranoid, you can have the following lines in your .git/config file and keep using git-merge-resolve when pulling one remote: [pull] twohead = resolve OTOH, you can say this: [pull] twohead = resolve twohead = recursive to try quicker resolve first, and when it fails, fall back to recursive. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-07Recover dropped +x bit from git-pull.sh by accident.Libravatar Junio C Hamano1-0/+0
Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-06Refactored merge options into separate merge-options.txt.Libravatar Jon Loeliger1-1/+11
Refactored fetch options into separate fetch-options.txt. Made git-merge use merge-options. Made git-fetch use fetch-options. Made git-pull use merge-options and fetch-options. Added --help option to git-pull and git-format-patch scripts. Rewrote Documentation/Makefile to dynamically determine include dependencies. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-04Document the --no-commit flag betterLibravatar Junio C Hamano1-1/+1
Pasky and I did overlapping documentation independently; this is to pick up better wordings from what he sent me. Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-03Add --no-commit to git-merge/git-pull.Libravatar Junio C Hamano1-2/+4
With --no-commit flag, git-pull will perform the merge but pretends as if the merge needed a hand resolve even if automerge cleanly resolves, to give the user a chance to add further changes and edit the commit message. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-03git-pull: do not barf on -a flag meant for git-fetch.Libravatar Junio C Hamano1-1/+2
Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-29Use git-merge in git-pull (second try).Libravatar Junio C Hamano1-4/+44
This again makes git-pull to use git-merge, so that different merge strategy can be specified from the command line. Without explicit strategy parameter, it defaults to git-merge-resolve if only one remote is pulled, and git-merge-octopus otherwise, to keep the default behaviour of the command the same as the original. Also this brings another usability measure: -n flag from the command line, if given, is passed to git-merge to prevent it from running the diffstat at the end of the merge. Signed-off-by: Junio C Hamano <junkio@cox.net>