| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When "git p4" imports changelist that removes paths, it failed to
convert pathnames when the p4 used encoding different from the one
used on the Git side. This has been corrected.
* ls/p4-path-encoding:
git-p4: fix git-p4.pathEncoding for removed files
|
|
In a9e38359e3 we taught git-p4 a way to re-encode path names from what
was used in Perforce to UTF-8. This path re-encoding worked properly for
"added" paths. "Removed" paths were not re-encoded and therefore
different from the "added" paths. Consequently, these files were not
removed in a git-p4 cloned Git repository because the path names did not
match.
Fix this by moving the re-encoding to a place that affects "added" and
"removed" paths. Add a test to demonstrate the issue.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git p4" did not work well with multiple git-p4.mapUser entries on
Windows.
* gv/mingw-p4-mapuser:
git-p4: fix git-p4.mapUser on Windows
|
|
When running git-p4 on Windows, with multiple git-p4.mapUser entries in
git config - no user mappings are applied to the generated repository.
Reproduction Steps:
1. Add multiple git-p4.mapUser entries to git config on a Windows
machine
2. Attempt to clone a p4 repository
None of the user mappings will be applied.
This issue is actually caused by gitConfigList, using split(os.linesep)
to convert the output of git config --get-all into a list. On Windows,
os.linesep is equal to '\r\n' - however git.exe returns configuration
with a line seperator of '\n'.
This leads to the list returned by gitConfigList containing only one
element - which contains the full output of git config --get-all in
string form, which causes problems for the code introduced to
getUserMapFromPerforceServer in 10d08a149d ("git-p4: map a P4 user to
Git author name and email address", 2016-03-01)
This issue should be caught by the test introduced in 10d08a1, however
would require running on Windows to reproduce.
Using splitlines solves this issue, by splitting config on all
typical delimiters ('\n', '\r\n' etc.)
Signed-off-by: George Vanburgh <gvanburgh@bloomberg.net>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A recent updates to "git p4" was not usable for older p4 but it
could be made to work with minimum changes. Do so.
* ls/p4-retry-thrice:
git-p4: do not pass '-r 0' to p4 commands
|
|
"git p4" that tracks multile p4 paths imported a single changelist
that touches files in these multiple paths as one commit, followed
by many empty commits. This has been fixed.
* gv/p4-multi-path-commit-fix:
git-p4: fix multi-path changelist empty commits
|
|
"git p4" misbehaved when swapping a directory and a symbolic link.
* ld/p4-compare-dir-vs-symlink:
git-p4: avoid crash adding symlinked directory
|
|
git-p4 crashes when used with a very old p4 client version
that does not support the '-r <number>' option in its commands.
Allow making git-p4 work with old p4 clients by setting git-p4.retries to 0.
Alternatively git-p4.retries could be made opt-in.
But since only very old, barely maintained p4 versions don't support
the '-r' option, the setting-retries-to-0 workaround would do.
The "-r retries" option is present in Perforce 2012.2 Command Reference,
but absent from Perforce 2012.1 Command Reference.
Signed-off-by: Igor Kushnir <igorkuo@gmail.com>
Acked-by: Lars Schneider <larsxschneider@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update GitLFS integration with "git p4".
* ls/p4-lfs:
git-p4: add diff/merge properties to .gitattributes for GitLFS files
|
|
"git p4" that tracks multile p4 paths imported a single changelist
that touches files in these multiple paths as one commit, followed
by many empty commits. This has been fixed.
* gv/p4-multi-path-commit-fix:
git-p4: fix multi-path changelist empty commits
|
|
"git p4" misbehaved when swapping a directory and a symbolic link.
* ld/p4-compare-dir-vs-symlink:
git-p4: avoid crash adding symlinked directory
|
|
The `git lfs track` command generates a .gitattributes file with diff
and merge properties [1]. Set the same .gitattributes format for files
tracked with GitLFS in git-p4.
[1] https://github.com/git-lfs/git-lfs/blob/v1.5.3/commands/command_track.go#L121
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git p4" didn't interact with the internal of .git directory
correctly in the modern "git-worktree"-enabled world.
* ld/p4-worktree:
git-p4: support git worktrees
|
|
When importing from multiple perforce paths - we may attempt to
import a changelist that contains files from two (or more) of these
depot paths. Currently, this results in multiple git commits - one
containing the changes, and the other(s) as empty commit(s). This
behavior was introduced in commit 1f90a64891 ("git-p4: reduce number
of server queries for fetches", 2015-12-19).
Reproduction Steps:
1. Have a git repo cloned from a perforce repo using multiple
depot paths (e.g. //depot/foo and //depot/bar).
2. Submit a single change to the perforce repo that makes changes
in both //depot/foo and //depot/bar.
3. Run "git p4 sync" to sync the change from #2.
Change is synced as multiple commits, one for each depot path that
was affected.
Using a set, instead of a list inside p4ChangesForPaths() ensures
that each changelist is unique to the returned list, and therefore
only a single commit is generated for each changelist.
Reported-by: James Farwell <jfarwell@vmware.com>
Signed-off-by: George Vanburgh <gvanburgh@bloomberg.net>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When submitting to P4, if git-p4 came across a symlinked
directory, then during the generation of the submit diff, it would
try to open it as a normal file and fail.
Spot symlinks (of any type) and output a description of the symlink
instead.
Add a test case.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ls/p4-retry-thrice:
git-p4: add config to retry p4 commands; retry 3 times by default
|
|
"git p4" LFS support was broken when LFS stores an empty blob.
* ls/p4-empty-file-on-lfs:
git-p4: fix empty file processing for large file system backend GitLFS
|
|
git-p4 would attempt to find the git directory using
its own specific code, which did not know about git
worktrees.
Rework it to use "git rev-parse --git-dir" instead.
Add test cases for worktree usage and specifying
git directory via --git-dir and $GIT_DIR.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If git-p4 tried to store an empty file in GitLFS then it crashed while
parsing the pointer file:
oid = re.search(r'^oid \w+:(\w+)', pointerFile, re.MULTILINE).group(1)
AttributeError: 'NoneType' object has no attribute 'group'
This happens because GitLFS does not create a pointer file for an empty
file. Teach git-p4 this behavior to fix the problem and add a test case.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
P4 commands can fail due to random network issues. P4 users can counter
these issues by using a retry flag supported by all p4 commands [1].
Add an integer Git config value `git-p4.retries` to define the number of
retries for all p4 invocations. If the config is not defined then set
the default retry count to 3.
[1] https://www.perforce.com/perforce/doc.current/manuals/cmdref/global.options.html
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adds new option "--update-shelve CHANGELIST" which updates
an existing shelved changelist.
The original changelist must have been created by the current user.
This allows workflow something like:
hack hack hack
git commit
git p4 submit --shelve
$mail interested parties about shelved changelist
make corrections
git commit --amend
git p4 submit --update-shelve $CHANGELIST
$mail interested parties about shelved changelist
etc
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a --shelve command line argument which invokes p4 shelve instead
of submitting changes. After shelving the changes are reverted from the
p4 workspace.
Signed-off-by: Vinicius Kursancew <viniciusalexandre@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
<BAD> <CORRECTED>
accidently accidentally
commited committed
dependancy dependency
emtpy empty
existance existence
explicitely explicitly
git-upload-achive git-upload-archive
hierachy hierarchy
indegee indegree
intial initial
mulitple multiple
non-existant non-existent
precendence. precedence.
priviledged privileged
programatically programmatically
psuedo-binary pseudo-binary
soemwhere somewhere
successfull successful
transfering transferring
uncommited uncommitted
unkown unknown
usefull useful
writting writing
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git p4" used a location outside $GIT_DIR/refs/ to place its
temporary branches, which has been moved to refs/git-p4-tmp/.
* ls/p4-tmp-refs:
git-p4: place temporary refs used for branch import under refs/git-p4-tmp
|
|
A bug, which caused "git p4" while running under verbose mode to
report paths that are omitted due to branch prefix incorrectly, has
been fixed; the command said "Ignoring file outside of prefix" for
paths that are _inside_.
* ao/p4-has-branch-prefix-fix:
git-p4: correct hasBranchPrefix verbose output
|
|
Git-P4 used to place temporary refs under "git-p4-tmp". Since 3da1f37
Git checks that all refs are placed under "refs". Instruct Git-P4 to
place temporary refs under "refs/git-p4-tmp". There are no backwards
compatibility considerations as these refs are transient.
Use "git show-ref --verify" to check the (non-)existience of the refs
instead of file checks assuming the file-based ref backend.
All refs under "refs" are shared across all worktrees. This is not
desired for temporary Git-P4 refs and will be adressed in a later patch.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Reviewed-by: Vitor Antunes <vitor.hda@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A bug, which caused "git p4" while running under verbose mode to
report paths that are omitted due to branch prefix incorrectly, has
been fixed; the command said "Ignoring file outside of prefix" for
paths that are _inside_.
* ao/p4-has-branch-prefix-fix:
git-p4: correct hasBranchPrefix verbose output
|
|
The logic here was inverted, you got a message saying the file is
ignored for each file that is not ignored.
Signed-off-by: Andrew Oakley <aoakley@roku.com>
Acked-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recent update to Git LFS broke "git p4" by changing the output from
its "lfs pointer" subcommand.
* ls/p4-lfs:
git-p4: fix Git LFS pointer parsing
travis-ci: express Linux/OS X dependency versions more clearly
travis-ci: update Git-LFS and P4 to the latest version
|
|
Git LFS 1.2.0 removed a preamble from the output of the 'git lfs pointer'
command [1] which broke the parsing of this output. Adjust the parser
to support the old and the new format.
Please note that this patch slightly changes the second return parameter
from a list of LF terminated strings to a single string that contains
a number of LF characters.
[1] https://github.com/github/git-lfs/commit/da2935d9a739592bc775c98d8ef4df9c72ea3b43
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Helped-by: Sebastian Schuberth <sschuberth@gmail.com>
Helped-by: Ben Woosley <ben.woosley@gmail.com>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When migrating from Perforce to git the information about P4 jobs
associated with P4 changelists is lost.
Having these jobs listed on messages of related git commits enables smooth
migration for projects that take advantage of e.g. JIRA integration
(which uses jobs on Perforce side and parses commit messages on git side).
The jobs are added to the message in the same format as is expected when
migrating in the reverse direction.
Signed-off-by: Jan Durovec <jan.durovec@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git p4" now allows P4 author names to be mapped to Git author
names.
* ls/p4-map-user:
git-p4: map a P4 user to Git author name and email address
|
|
Map a P4 user to a specific name and email address in Git with the
"git-p4.mapUser" config. The config value must be a string adhering
to the format "p4user = First Lastname <email@address.com>".
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After changing the type of a file in the git repository, it is not possible to
"git p4 publish" the commit to perforce. This is due to the fact that the git
"T" status is not handled in git-p4.py. This can typically occur when replacing
an existing file with a symbolic link.
The "T" modifier is now supported in git-p4.py. When a file type has changed,
inform perforce with the "p4 edit -f auto" command.
Signed-off-by: Romain Picard <romain.picard@oakbits.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git p4" when interacting with multiple depots at the same time
used to incorrectly drop changes.
* sh/p4-multi-depot:
git-p4: reduce number of server queries for fetches
git-p4: support multiple depot paths in p4 submit
git-p4: failing test case for skipping changes with multiple depots
|
|
When fetching changes from a depot using a full client spec, there
is no need to perform as many queries as there are top-level paths
in the client spec. Instead we query all changes in chronological
order, also getting rid of the need to sort the results and remove
duplicates.
Signed-off-by: Sam Hocevar <sam@hocevar.net>
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When submitting from a repository that was cloned using a client spec,
use the full list of paths when ruling out files that are outside the
view. This fixes a bug where only files pertaining to the first path
would be included in the p4 submit.
Signed-off-by: Sam Hocevar <sam@hocevar.net>
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git p4" used to import Perforce CLs that touch only paths outside
the client spec as empty commits. It has been corrected to ignore
them instead, with a new configuration git-p4.keepEmptyCommits as a
backward compatibility knob.
* ls/p4-keep-empty-commits:
git-p4: add option to keep empty commits
|
|
A changelist that contains only excluded files due to a client spec was
imported as an empty commit. Fix that issue by ignoring these commits.
Add option "git-p4.keepEmptyCommits" to make the previous behavior
available.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Helped-by: Pete Harlan
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
http: treat config options sslCAPath and sslCAInfo as paths
Documentation/diff: give --word-diff-regex=. example
filter-branch: deal with object name vs. pathname ambiguity in tree-filter
check-ignore: correct documentation about output
git-p4: clean up after p4 submit failure
git-p4: work with a detached head
git-p4: add option to system() to return subshell status
git-p4: add failing test for submit from detached head
remote-http(s): support SOCKS proxies
t5813: avoid creating urls that break on cygwin
Escape Git's exec path in contrib/rerere-train.sh script
allow hooks to ignore their standard input stream
rebase-i-exec: Allow space in SHELL_PATH
Documentation: make environment variable formatting more consistent
|
|
Just like the working tree is cleaned up when the user cancelled
submission in P4Submit.applyCommit(), clean up the mess if "p4
submit" fails.
* eg/p4-submit-catch-failure:
git-p4: clean up after p4 submit failure
|
|
Make git-p4 work on a detached head.
* ld/p4-detached-head:
git-p4: work with a detached head
git-p4: add option to system() to return subshell status
git-p4: add failing test for submit from detached head
|
|
When "p4 submit" command fails in P4Submit.applyCommit, the
workspace is left with the changes. We already have code to revert
the changes to the workspace when the user decides to cancel
submission by aborting the editor that edits the change description,
and we should treat the "p4 submit" failure the same way.
Clean the workspace if p4_write_pipe raised SystemExit, so that the
user don't have to do it themselves.
Signed-off-by: GIRARD Etienne <egirard@murex.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Jeff King <peff@peff.net>
|
|
When submitting, git-p4 finds the current branch in
order to know if it is allowed to submit (configuration
"git-p4.allowSubmit").
On a detached head, detecting the branch would fail, and
git-p4 would report a cryptic error.
This change teaches git-p4 to recognise a detached head and
submit successfully.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Add an optional parameter ignore_error to the git-p4 system()
function. If used, it will return the subshell exit status
rather than throwing an exception.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Work around "git p4" failing when the P4 depot records the contents
in UTF-16 without UTF-16 BOM.
* ls/p4-translation-failure:
git-p4: handle "Translation of file content failed"
git-p4: add test case for "Translation of file content failed" error
|
|
Correct "git p4 --detect-labels" so that it does not fail to create
a tag that points at a commit that is also being imported.
* ld/p4-import-labels:
git-p4: fix P4 label import for unprocessed commits
git-p4: do not terminate creating tag for unknown commit
git-p4: failing test for ignoring invalid p4 labels
|
|
"git-p4" tried to use from ctypes module without first importing
it.
* dk/p4-import-ctypes:
git-p4: import the ctypes module
|
|
The ctypes module is used on windows to calculate free disk space,
so it must be imported. We won't need it on other platforms, but
the module is available in Python 2.5 and newer, so importing it
unconditionally is harmless.
Signed-off-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach "git p4" to send large blobs outside the repository by
talking to Git LFS.
* ls/p4-lfs:
git-p4: add Git LFS backend for large file system
git-p4: add support for large file systems
git-p4: check free space during streaming
git-p4: add file streaming progress in verbose mode
git-p4: return an empty list if a list config has no values
git-p4: add gitConfigInt reader
git-p4: add optional type specifier to gitConfig reader
|
Junio C Hamano
Lars Schneider
George Vanburgh
Igor Kushnir
Luke Diamand
Vinicius Kursancew
Ville Skyttä
Andrew Oakley
Jan Durovec
Lars Schneider
Romain Picard
Sam Hocevar
Jeff King
GIRARD Etienne
Dennis Kaarsemaker