summaryrefslogtreecommitdiff
path: root/git-p4.py
AgeCommit message (Collapse)AuthorFilesLines
2016-08-11Spelling fixesLibravatar Ville Skyttä1-1/+1
<BAD> <CORRECTED> accidently accidentally commited committed dependancy dependency emtpy empty existance existence explicitely explicitly git-upload-achive git-upload-archive hierachy hierarchy indegee indegree intial initial mulitple multiple non-existant non-existent precendence. precedence. priviledged privileged programatically programmatically psuedo-binary pseudo-binary soemwhere somewhere successfull successful transfering transferring uncommited uncommitted unkown unknown usefull useful writting writing Signed-off-by: Ville Skyttä <ville.skytta@iki.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-19Merge branch 'ls/p4-tmp-refs'Libravatar Junio C Hamano1-1/+1
"git p4" used a location outside $GIT_DIR/refs/ to place its temporary branches, which has been moved to refs/git-p4-tmp/. * ls/p4-tmp-refs: git-p4: place temporary refs used for branch import under refs/git-p4-tmp
2016-07-08git-p4: place temporary refs used for branch import under refs/git-p4-tmpLibravatar Lars Schneider1-1/+1
Git-P4 used to place temporary refs under "git-p4-tmp". Since 3da1f37 Git checks that all refs are placed under "refs". Instruct Git-P4 to place temporary refs under "refs/git-p4-tmp". There are no backwards compatibility considerations as these refs are transient. Use "git show-ref --verify" to check the (non-)existience of the refs instead of file checks assuming the file-based ref backend. All refs under "refs" are shared across all worktrees. This is not desired for temporary Git-P4 refs and will be adressed in a later patch. Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Reviewed-by: Vitor Antunes <vitor.hda@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-06Merge branch 'ao/p4-has-branch-prefix-fix'Libravatar Junio C Hamano1-1/+1
A bug, which caused "git p4" while running under verbose mode to report paths that are omitted due to branch prefix incorrectly, has been fixed; the command said "Ignoring file outside of prefix" for paths that are _inside_. * ao/p4-has-branch-prefix-fix: git-p4: correct hasBranchPrefix verbose output
2016-06-22git-p4: correct hasBranchPrefix verbose outputLibravatar Andrew Oakley1-1/+1
The logic here was inverted, you got a message saying the file is ignored for each file that is not ignored. Signed-off-by: Andrew Oakley <aoakley@roku.com> Acked-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-10Merge branch 'ls/p4-lfs'Libravatar Junio C Hamano1-3/+10
Recent update to Git LFS broke "git p4" by changing the output from its "lfs pointer" subcommand. * ls/p4-lfs: git-p4: fix Git LFS pointer parsing travis-ci: express Linux/OS X dependency versions more clearly travis-ci: update Git-LFS and P4 to the latest version
2016-04-28git-p4: fix Git LFS pointer parsingLibravatar Lars Schneider1-3/+10
Git LFS 1.2.0 removed a preamble from the output of the 'git lfs pointer' command [1] which broke the parsing of this output. Adjust the parser to support the old and the new format. Please note that this patch slightly changes the second return parameter from a list of LF terminated strings to a single string that contains a number of LF characters. [1] https://github.com/github/git-lfs/commit/da2935d9a739592bc775c98d8ef4df9c72ea3b43 Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Helped-by: Sebastian Schuberth <sschuberth@gmail.com> Helped-by: Ben Woosley <ben.woosley@gmail.com> Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-04-19git-p4: add P4 jobs to git commit messageLibravatar Jan Durovec1-0/+12
When migrating from Perforce to git the information about P4 jobs associated with P4 changelists is lost. Having these jobs listed on messages of related git commits enables smooth migration for projects that take advantage of e.g. JIRA integration (which uses jobs on Perforce side and parses commit messages on git side). The jobs are added to the message in the same format as is expected when migrating in the reverse direction. Signed-off-by: Jan Durovec <jan.durovec@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-04-06Merge branch 'ls/p4-map-user'Libravatar Junio C Hamano1-0/+9
"git p4" now allows P4 author names to be mapped to Git author names. * ls/p4-map-user: git-p4: map a P4 user to Git author name and email address
2016-03-15git-p4: map a P4 user to Git author name and email addressLibravatar Lars Schneider1-0/+9
Map a P4 user to a specific name and email address in Git with the "git-p4.mapUser" config. The config value must be a string adhering to the format "p4user = First Lastname <email@address.com>". Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Reviewed-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-01-13git-p4.py: add support for filetype changeLibravatar Romain Picard1-2/+7
After changing the type of a file in the git repository, it is not possible to "git p4 publish" the commit to perforce. This is due to the fact that the git "T" status is not handled in git-p4.py. This can typically occur when replacing an existing file with a symbolic link. The "T" modifier is now supported in git-p4.py. When a file type has changed, inform perforce with the "p4 edit -f auto" command. Signed-off-by: Romain Picard <romain.picard@oakbits.com> Acked-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-12-28Merge branch 'sh/p4-multi-depot'Libravatar Junio C Hamano1-25/+30
"git p4" when interacting with multiple depots at the same time used to incorrectly drop changes. * sh/p4-multi-depot: git-p4: reduce number of server queries for fetches git-p4: support multiple depot paths in p4 submit git-p4: failing test case for skipping changes with multiple depots
2015-12-21git-p4: reduce number of server queries for fetchesLibravatar Sam Hocevar1-23/+21
When fetching changes from a depot using a full client spec, there is no need to perform as many queries as there are top-level paths in the client spec. Instead we query all changes in chronological order, also getting rid of the need to sort the results and remove duplicates. Signed-off-by: Sam Hocevar <sam@hocevar.net> Signed-off-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-12-21git-p4: support multiple depot paths in p4 submitLibravatar Sam Hocevar1-2/+9
When submitting from a repository that was cloned using a client spec, use the full list of paths when ruling out files that are outside the view. This fixes a bug where only files pertaining to the first path would be included in the p4 submit. Signed-off-by: Sam Hocevar <sam@hocevar.net> Signed-off-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-12-15Merge branch 'ls/p4-keep-empty-commits'Libravatar Junio C Hamano1-17/+27
"git p4" used to import Perforce CLs that touch only paths outside the client spec as empty commits. It has been corrected to ignore them instead, with a new configuration git-p4.keepEmptyCommits as a backward compatibility knob. * ls/p4-keep-empty-commits: git-p4: add option to keep empty commits
2015-12-10git-p4: add option to keep empty commitsLibravatar Lars Schneider1-17/+27
A changelist that contains only excluded files due to a client spec was imported as an empty commit. Fix that issue by ignoring these commits. Add option "git-p4.keepEmptyCommits" to make the previous behavior available. Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Helped-by: Pete Harlan Acked-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-12-01Merge branch 'maint'Libravatar Jeff King1-43/+57
* maint: http: treat config options sslCAPath and sslCAInfo as paths Documentation/diff: give --word-diff-regex=. example filter-branch: deal with object name vs. pathname ambiguity in tree-filter check-ignore: correct documentation about output git-p4: clean up after p4 submit failure git-p4: work with a detached head git-p4: add option to system() to return subshell status git-p4: add failing test for submit from detached head remote-http(s): support SOCKS proxies t5813: avoid creating urls that break on cygwin Escape Git's exec path in contrib/rerere-train.sh script allow hooks to ignore their standard input stream rebase-i-exec: Allow space in SHELL_PATH Documentation: make environment variable formatting more consistent
2015-12-01Merge branch 'eg/p4-submit-catch-failure' into maintLibravatar Jeff King1-34/+37
Just like the working tree is cleaned up when the user cancelled submission in P4Submit.applyCommit(), clean up the mess if "p4 submit" fails. * eg/p4-submit-catch-failure: git-p4: clean up after p4 submit failure
2015-12-01Merge branch 'ld/p4-detached-head' into maintLibravatar Jeff King1-9/+20
Make git-p4 work on a detached head. * ld/p4-detached-head: git-p4: work with a detached head git-p4: add option to system() to return subshell status git-p4: add failing test for submit from detached head
2015-11-24git-p4: clean up after p4 submit failureLibravatar GIRARD Etienne1-34/+37
When "p4 submit" command fails in P4Submit.applyCommit, the workspace is left with the changes. We already have code to revert the changes to the workspace when the user decides to cancel submission by aborting the editor that edits the change description, and we should treat the "p4 submit" failure the same way. Clean the workspace if p4_write_pipe raised SystemExit, so that the user don't have to do it themselves. Signed-off-by: GIRARD Etienne <egirard@murex.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Luke Diamand <luke@diamand.org> Signed-off-by: Jeff King <peff@peff.net>
2015-11-24git-p4: work with a detached headLibravatar Luke Diamand1-7/+16
When submitting, git-p4 finds the current branch in order to know if it is allowed to submit (configuration "git-p4.allowSubmit"). On a detached head, detecting the branch would fail, and git-p4 would report a cryptic error. This change teaches git-p4 to recognise a detached head and submit successfully. Signed-off-by: Luke Diamand <luke@diamand.org> Signed-off-by: Jeff King <peff@peff.net>
2015-11-24git-p4: add option to system() to return subshell statusLibravatar Luke Diamand1-2/+4
Add an optional parameter ignore_error to the git-p4 system() function. If used, it will return the subshell exit status rather than throwing an exception. Signed-off-by: Luke Diamand <luke@diamand.org> Signed-off-by: Jeff King <peff@peff.net>
2015-11-03Merge branch 'ls/p4-translation-failure' into maintLibravatar Junio C Hamano1-11/+16
Work around "git p4" failing when the P4 depot records the contents in UTF-16 without UTF-16 BOM. * ls/p4-translation-failure: git-p4: handle "Translation of file content failed" git-p4: add test case for "Translation of file content failed" error
2015-11-03Merge branch 'ld/p4-import-labels' into maintLibravatar Junio C Hamano1-8/+17
Correct "git p4 --detect-labels" so that it does not fail to create a tag that points at a commit that is also being imported. * ld/p4-import-labels: git-p4: fix P4 label import for unprocessed commits git-p4: do not terminate creating tag for unknown commit git-p4: failing test for ignoring invalid p4 labels
2015-10-26Merge branch 'dk/p4-import-ctypes'Libravatar Junio C Hamano1-0/+1
"git-p4" tried to use from ctypes module without first importing it. * dk/p4-import-ctypes: git-p4: import the ctypes module
2015-10-20git-p4: import the ctypes moduleLibravatar Dennis Kaarsemaker1-0/+1
The ctypes module is used on windows to calculate free disk space, so it must be imported. We won't need it on other platforms, but the module is available in Python 2.5 and newer, so importing it unconditionally is harmless. Signed-off-by: Dennis Kaarsemaker <dennis@kaarsemaker.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-10-15Merge branch 'ls/p4-lfs'Libravatar Junio C Hamano1-16/+254
Teach "git p4" to send large blobs outside the repository by talking to Git LFS. * ls/p4-lfs: git-p4: add Git LFS backend for large file system git-p4: add support for large file systems git-p4: check free space during streaming git-p4: add file streaming progress in verbose mode git-p4: return an empty list if a list config has no values git-p4: add gitConfigInt reader git-p4: add optional type specifier to gitConfig reader
2015-10-15Merge branch 'ls/p4-translation-failure'Libravatar Junio C Hamano1-11/+16
Work around "git p4" failing when the P4 depot records the contents in UTF-16 without UTF-16 BOM. * ls/p4-translation-failure: git-p4: handle "Translation of file content failed" git-p4: add test case for "Translation of file content failed" error
2015-10-07Merge branch 'ls/p4-path-encoding'Libravatar Junio C Hamano1-0/+10
"git p4" learned to reencode the pathname it uses to communicate with the p4 depot with a new option. * ls/p4-path-encoding: git-p4: use replacement character for non UTF-8 characters in paths git-p4: improve path encoding verbose output git-p4: add config git-p4.pathEncoding
2015-10-05Merge branch 'ld/p4-import-labels'Libravatar Junio C Hamano1-8/+17
Correct "git p4 --detect-labels" so that it does not fail to create a tag that points at a commit that is also being imported. * ld/p4-import-labels: git-p4: fix P4 label import for unprocessed commits git-p4: do not terminate creating tag for unknown commit git-p4: failing test for ignoring invalid p4 labels
2015-10-03git-p4: add Git LFS backend for large file systemLibravatar Lars Schneider1-0/+72
Add example implementation including test cases for the large file system using Git LFS. Pushing files to the Git LFS server is not tested. Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-10-03git-p4: add support for large file systemsLibravatar Lars Schneider1-10/+129
Perforce repositories can contain large (binary) files. Migrating these repositories to Git generates very large local clones. External storage systems such as Git LFS [1], Git Fat [2], Git Media [3], git-annex [4] try to address this problem. Add a generic mechanism to detect large files based on extension, uncompressed size, and/or compressed size. [1] https://git-lfs.github.com/ [2] https://github.com/jedbrown/git-fat [3] https://github.com/alebedev/git-media [4] https://git-annex.branchable.com/ Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Conflicts: Documentation/git-p4.txt git-p4.py Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-10-03git-p4: check free space during streamingLibravatar Lars Schneider1-0/+18
git-p4 will just halt if there is not enough disk space while streaming content from P4 to Git. Add a check to ensure at least 4 times (arbitrarily chosen) the size of a streamed file is available. Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-10-03git-p4: add file streaming progress in verbose modeLibravatar Lars Schneider1-2/+18
If a file is streamed from P4 to Git then the verbose mode prints continuously the progress as percentage like this: //depot/file.bin 20% (10 MB) Upon completion the progress is overwritten with depot source, local file and size like this: //depot/file.bin --> local/file.bin (10 MB) Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-10-03git-p4: return an empty list if a list config has no valuesLibravatar Lars Schneider1-0/+2
Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-10-03git-p4: add gitConfigInt readerLibravatar Lars Schneider1-0/+11
Add a git config reader for integer variables. Please note that the git config implementation automatically supports k, m, and g suffixes. Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-10-03git-p4: add optional type specifier to gitConfig readerLibravatar Lars Schneider1-6/+6
The functions "gitConfig" and "gitConfigBool" are almost identical. Make "gitConfig" more generic by adding an optional type specifier. Use the type specifier "--bool" with "gitConfig" to implement "gitConfigBool. This prepares the implementation of other type specifiers such as "--int". Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Acked-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-22git-p4: handle "Translation of file content failed"Libravatar Lars Schneider1-11/+16
A P4 repository can get into a state where it contains a file with type UTF-16 that does not contain a valid UTF-16 BOM. If git-p4 attempts to retrieve the file then the process crashes with a "Translation of file content failed" error. More info here: http://answers.perforce.com/articles/KB/3117 Fix this by detecting this error and retrieving the file as binary instead. The result in Git is the same. Known issue: This works only if git-p4 is executed in verbose mode. In normal mode no exceptions are thrown and git-p4 just exits. Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-21git-p4: use replacement character for non UTF-8 characters in pathsLibravatar Lars Schneider1-1/+1
If non UTF-8 characters are detected in paths then replace them with a placeholder instead of throwing a UnicodeDecodeError exception. This restores the original (implicit) implementation that was broken in 00a9403. Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Reviewed-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-16git-p4: improve path encoding verbose outputLibravatar Lars Schneider1-10/+9
If a path with non-ASCII characters is detected then print the encoding and the encoded string in verbose mode. Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-03git-p4: add config git-p4.pathEncodingLibravatar Lars Schneider1-0/+11
Perforce keeps the encoding of a path as given by the originating OS. Git expects paths encoded as UTF-8. Add a config to tell git-p4 what encoding Perforce had used for the paths. This encoding is used to transcode the paths to UTF-8. As an example, Perforce on Windows often uses “cp1252” to encode path names. Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Acked-by: Luke Diamand <luke@diamand.org> Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-28git-p4: fix P4 label import for unprocessed commitsLibravatar Luke Diamand1-8/+17
With --detect-labels enabled, git-p4 will try to create tags using git fast-import by writing a "tag" clause to the fast-import stream. If the commit that the tag references has not yet actually been processed by fast-import, then the tag can't be created and git-p4 fails to import the P4 label. Teach git-p4 to use fast-import "marks" when creating tags which reference commits created during the current run of the program. Commits created before the current run are still referenced in the old way using a normal git commit. Signed-off-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-28git-p4: do not terminate creating tag for unknown commitLibravatar Luke Diamand1-2/+2
If p4 reports a tag for a commit that git-p4 does not know about (e.g. because it references a P4 changelist that was imported prior to the point at which the repo was cloned into git), make sure that the error is correctly caught and handled. rather than just crashing. Signed-off-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-28git-p4: honor core.ignorecase when using P4 client specsLibravatar Lars Schneider1-0/+7
Perforce depot may record paths in mixed cases, e.g. "p4 files" may show that there are these two paths: //depot/Path/to/file1 //depot/pATH/to/file2 and with "p4" or "p4v", these end up in the same directory, e.g. //depot/Path/to/file1 //depot/Path/to/file2 which is the desired outcome on case insensitive systems. If git-p4 is used with client spec "//depot/Path/...", however, then all files not matching the case in the client spec are ignored (in the example above "//depot/pATH/to/file2"). Fix this by using the path case that appears first in lexicographical order when core.ignorecase is set to true. This behavior is consistent with "p4" and "p4v". Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Acked-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-24Merge branch 'ld/p4-changes-block-size'Libravatar Junio C Hamano1-22/+63
More Perforce row number limit workaround for "git p4". * ld/p4-changes-block-size: git-p4: fixing --changes-block-size handling git-p4: add tests for non-numeric revision range git-p4: test with limited p4 server results git-p4: additional testing of --changes-block-size
2015-06-11Merge branch 'mt/p4-depotFile-at-version'Libravatar Junio C Hamano1-1/+1
* mt/p4-depotFile-at-version: p4: retrieve the right revision of the file in UTF-16 codepath
2015-06-10git-p4: fixing --changes-block-size handlingLibravatar Luke Diamand1-22/+63
The --changes-block-size handling was intended to help when a user has a limited "maxscanrows" (see "p4 group"). It used "p4 changes -m $maxchanges" to limit the number of results. Unfortunately, it turns out that the "maxscanrows" and "maxresults" limits are actually applied *before* the "-m maxchanges" parameter is considered (experimentally). Fix the block-size handling so that it gets blocks of changes limited by revision number ($Start..$Start+$N, etc). This limits the number of results early enough that both sets of tests pass. Note that many other Perforce operations can fail for the same reason (p4 print, p4 files, etc) and it's probably not possible to workaround this. In the real world, this is probably not usually a problem. Signed-off-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-05Merge branch 'ld/p4-editor-multi-words'Libravatar Junio C Hamano1-1/+1
Unlike "$EDITOR" and "$GIT_EDITOR" that can hold the path to the command and initial options (e.g. "/path/to/emacs -nw"), 'git p4' did not let the shell interpolate the contents of the environment variable that name the editor "$P4EDITOR" (and "$EDITOR", too). Make it in line with the rest of Git, as well as with Perforce. * ld/p4-editor-multi-words: git-p4: tests: use test-chmtime in place of touch git-p4: fix handling of multi-word P4EDITOR git-p4: add failing test for P4EDITOR handling
2015-05-27p4: retrieve the right revision of the file in UTF-16 codepathLibravatar Miguel Torroja1-1/+1
Fixing bug with UTF-16 files when they are retrieved by git-p4. It was always getting the tip version of the file and the history of the file was lost. Signed-off-by: Miguel Torroja <miguel.torroja@gmail.com> Acked-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-24git-p4: fix handling of multi-word P4EDITORLibravatar Luke Diamand1-1/+1
This teaches git-p4 to pass the P4EDITOR variable to the shell for expansion, so that any command-line arguments are correctly handled. Without this, git-p4 can only launch the editor if P4EDITOR is solely the path to the binary, without any arguments. This also adjusts t9805, which relied on the previous behaviour. Suggested-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>