summaryrefslogtreecommitdiff
path: root/git-mergetool.sh
AgeCommit message (Collapse)AuthorFilesLines
2014-11-21mergetool: simplify conditionalsLibravatar David Aguilar1-11/+5
Combine the $last_status checks into a single conditional. Replace $last_status and $rollup_status with a single variable. Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-21Merge branch 'da/mergetool-temporary-directory'Libravatar Junio C Hamano1-4/+31
Allow a temporary directory specified to be used while running "git mergetool" backend. * da/mergetool-temporary-directory: t7610-mergetool: add test cases for mergetool.writeToTemp mergetool: add an option for writing to a temporary directory
2014-10-21Merge branch 'da/mergetool-tool-help'Libravatar Junio C Hamano1-1/+8
Allow "git mergetool --help" to run outside a Git repository. * da/mergetool-tool-help: difftool: don't assume that default sh is sane mergetool: don't require a work tree for --tool-help git-sh-setup: move GIT_DIR initialization into a function mergetool: use more conservative temporary filenames test-lib-functions: adjust style to match CodingGuidelines t7610-mergetool: prefer test_config over git config
2014-10-21Merge branch 'da/mergetool-temporary-filename'Libravatar Junio C Hamano1-5/+11
Tweak the names of the three throw-away files "git mergetool" comes up with to feed the merge tool backend, so that a file with a single dot in its name in the original (e.g. "hello.c") will have only one dot in these variants (e.g. "hello_BASE_4321.c"). * da/mergetool-temporary-filename: mergetool: use more conservative temporary filenames
2014-10-16mergetool: add an option for writing to a temporary directoryLibravatar David Aguilar1-4/+31
Teach mergetool to write files in a temporary directory when 'mergetool.writeToTemp' is true. This is helpful for tools such as Eclipse which cannot cope with multiple copies of the same file in the worktree. Suggested-by: Charles Bailey <charles@hashpling.org> Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-16mergetool: use more conservative temporary filenamesLibravatar David Aguilar1-5/+11
Avoid filenames with multiple dots so that overly-picky tools do not misinterpret their extension. Previously, foo/bar.ext in the worktree would result in e.g. ./foo/bar.ext.BASE.1234.ext This can be improved by having only a single .ext and using underscore instead of dot so that the extension cannot be misinterpreted. The resulting path becomes: ./foo/bar_BASE_1234.ext Suggested-by: Sergio Ferrero <sferrero@ensoftcorp.com> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-15difftool: don't assume that default sh is saneLibravatar Charles Bailey1-0/+4
git-difftool used to create a command list script containing $( ... ) and explicitly calls "sh -c" with this list. Instead, allow mergetool --tool-help to take a mode parameter and call mergetool directly to invoke the show_tool_help function. This mode parameter is intented for use solely by difftool. Signed-off-by: Charles Bailey <cbailey32@bloomberg.net> Helped-by: John Keeping <john@keeping.me.uk> Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-15mergetool: don't require a work tree for --tool-helpLibravatar Charles Bailey1-1/+4
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net> Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-15mergetool: use more conservative temporary filenamesLibravatar David Aguilar1-5/+11
Avoid filenames with multiple dots so that overly-picky tools do not misinterpret their extension. Previously, foo/bar.ext in the worktree would result in e.g. ./foo/bar.ext.BASE.1234.ext This can be improved by having only a single .ext and using underscore instead of dot so that the extension cannot be misinterpreted. The resulting path becomes: ./foo/bar_BASE_1234.ext Suggested-by: Sergio Ferrero <sferrero@ensoftcorp.com> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-09git-mergetool.sh: avoid "test <cond> -a/-o <cond>"Libravatar Elia Pinto1-2/+2
The construct is error-prone; "test" being built-in in most modern shells, the reason to avoid "test <cond> && test <cond>" spawning one extra process by using a single "test <cond> -a <cond>" no longer exists. Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-04-22mergetool: run prompt only if guessed toolLibravatar Felipe Contreras1-3/+11
It's annoying to see the prompt: Hit return to start merge resolution tool (foo): Every time the user does 'git mergetool' even if the user already configured 'foo' as the wanted tool. Display this prompt only when the user hasn't explicitly configured a tool. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Acked-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-14Merge branch 'al/mergetool-printf-fix'Libravatar Junio C Hamano1-1/+1
* al/mergetool-printf-fix: difftool--helper: fix printf usage git-mergetool: print filename when it contains %
2013-02-08git-mergetool: print filename when it contains %Libravatar Asheesh Laroia1-1/+1
If git-mergetool was invoked with files with a percent sign (%) in their names, it would print an error. For example, if you were calling mergetool on a file called "%2F": printf: %2F: invalid directive Do not pass random string to printf as if it were a valid format. Use format string "%s" and pass the string as data to be formatted instead. Signed-off-by: Asheesh Laroia <asheesh@asheesh.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-25git-mergetool: move show_tool_help to mergetool--libLibravatar John Keeping1-37/+0
This is the first step in unifying "git difftool --tool-help" and "git mergetool --tool-help". Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-23mergetool: style fixesLibravatar Junio C Hamano1-273/+308
This script is one of the sizeable ones that tempted people to copy its "neibouring style" in their new code, but was littered with styles incompatible with our style guide. - use one tab, not four spaces, per indent level; - long lines can be wrapped after '|', '&&', or '||' for readability. - structures like "if .. then .. else .. fi", "while .. do .. done" are split into lines in such a way that does not require unnecessary semicolon. - case, esac and case-arms align at the same column. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-07-23mergetool: support --tool-help option like difftool doesLibravatar Junio C Hamano1-1/+41
This way we do not have to risk the list of tools going out of sync between the implementation and the documentation. In the same spirit as bf73fc2 (difftool: print list of valid tools with '--tool-help', 2012-03-29), trim the list of merge backends in the documentation. We do not want to have a complete list of valid tools; we only want a list to help people guess what kind of things the tools do to be specified there, and refer them to --tool-help for a complete list. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-23mergetool: Provide an empty file when neededLibravatar David Aguilar1-4/+8
Some merge tools cannot cope when $LOCAL, $BASE, or $REMOTE are missing. $BASE can be missing when two branches independently add the same filename. Provide an empty file to make these tools happy. When a delete/modify conflict occurs, $LOCAL and $REMOTE can also be missing. We have special case code to handle such case so this change may not affect that codepath, but try to be consistent and create an empty file for them anyway. Reported-by: Jason Wenger <jcwenger@gmail.com> Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-10Merge branch 'jm/mergetool-pathspec'Libravatar Junio C Hamano1-49/+27
* jm/mergetool-pathspec: mergetool: no longer need to save standard input mergetool: Use args as pathspec to unmerged files
2011-09-26mergetool: no longer need to save standard inputLibravatar Junio C Hamano1-6/+4
Earlier code wanted to run merge_file and prompt_after_failed_merge both of which wanted to read from the standard input of the entire script inside a while loop, which read from a pipe, and in order to do so, it redirected the original standard input to another file descriptor. We no longer need to do so after the previous change. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-26mergetool: Use args as pathspec to unmerged filesLibravatar Jonathon Mah1-48/+28
Mergetool now treats its path arguments as a pathspec (like other git subcommands), restricting action to the given files and directories. Files matching the pathspec are filtered so mergetool only acts on unmerged paths; previously it would assume each path argument was in an unresolved state, and get confused when it couldn't check out their other stages. Running "git mergetool subdir" will prompt to resolve all conflicted blobs under subdir. Signed-off-by: Jonathon Mah <me@JonathonMah.com> Acked-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-19git-mergetool: check return value from readLibravatar Jay Soffian1-1/+1
Mostly fixed already by 6b44577 (mergetool: check return value from read, 2011-07-01). Catch two uses it missed. Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-07-01mergetool: check return value from readLibravatar Junio C Hamano1-4/+4
The process may not even have the standard input open in which case it will get stuck in an infinite loop to prompt and read nothing. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-13mergetool: Teach about submodulesLibravatar Jonathon Mah1-6/+84
When the index has conflicted submodules, mergetool used to mildly clobber the module, renaming it to mymodule.BACKUP.nnnn, then failing to copy it non-recursively. Recognize submodules and offer a resolution instead: Submodule merge conflict for 'Shared': {local}: submodule commit ad9f12e3e6205381bf2163a793d1e596a9e211d0 {remote}: submodule commit f5893fb70ec5646efcd9aa643c5136753ac89253 Use (l)ocal or (r)emote, or (a)bort? Selecting a commit will stage it, but not update the submodule (as git does had there been no conflict). Type changes are also supported, should the path be a submodule on one side, and a file, symlink, directory, or deleted on the other. Signed-off-by: Jonathon Mah <me@JonathonMah.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-16mergetool: don't skip modify/remove conflictsLibravatar Martin von Zweigbergk1-1/+1
Since bb0a484 (mergetool: Skip autoresolved paths, 2010-08-17), mergetool uses different ways of figuring out the list of files with merge conflicts depending on whether rerere is active. If rerere is active, mergetool will use 'git rerere status' to list the files with remaining conflicts. However, the output from that command does not list conflicts of types that rerere does not handle, such as modify/remove conflicts. Another problem with solely relying on the output from 'git rerere status' is that, for new conflicts that are not yet known to rerere, the output from the command will list the files even after adding them to the index. This means that if the conflicts in some files have been resolved and 'git mergetool' is run again, it will ask the user something like the following for each of those files. file1: file does not need merging Continue merging other unresolved paths (y/n) ? Solve both of these problems by replacing the call to 'git rerere status' with a call to the new 'git rerere remaining' that was introduced in the previous commit. Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-09-03Merge branch 'cb/maint-mergetool-no-tty'Libravatar Junio C Hamano1-2/+6
* cb/maint-mergetool-no-tty: mergetool: Remove explicit references to /dev/tty Conflicts: git-mergetool.sh
2010-08-20mergetool: Remove explicit references to /dev/ttyLibravatar Charles Bailey1-2/+6
mergetool used /dev/tty to switch back to receiving input from the user via inside a block with a redirected stdin. This harms testability, so change mergetool to save its original stdin to an alternative fd in this block and restore it for those sub-commands that need the original stdin. Includes additional compatibility fix from Jonathan Nieder. Tested-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Charles Bailey <charles@hashpling.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-17mergetool: Skip autoresolved pathsLibravatar David Aguilar1-5/+23
When mergetool is run without path limiters it loops over each entry in 'git ls-files -u'. This includes autoresolved paths. Teach mergetool to only merge files listed in 'rerere status' when rerere is enabled. There are some subtle but harmless changes in behavior. We now call cd_to_toplevel when no paths are given. We do this because 'rerere status' paths are always relative to the root. This is beneficial for the non-rerere use as well in that mergetool now runs against all unmerged files regardless of the current directory. This also slightly tweaks the output when run without paths to be more readable. The old output: Merging the files: foo bar baz The new output: Merging: foo bar baz Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-12mergetool--lib: simplify API usage by removing more global variablesLibravatar David Aguilar1-7/+8
The mergetool--lib scriplet was tricky to use because it relied upon the existance of several global shell variables. This removes more global variables so that things are simpler for callers. A side effect is that some variables are recomputed each time run_merge_tool() is called, but the overhead for recomputing them is justified by the simpler implementation. Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-11Fix misspelled mergetool.keepBackupLibravatar Ferry Huberts1-1/+1
In several places mergetool.keepBackup was misspelled as merge.keepBackup. Signed-off-by: Ferry Huberts <ferry.huberts@pelagic.nl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-08difftool/mergetool: refactor commands to use git-mergetool--libLibravatar David Aguilar1-211/+13
This consolidates the common functionality from git-mergetool and git-difftool--helper into a single git-mergetool--lib scriptlet. Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-07mergetool: use $( ... ) instead of `backticks`Libravatar David Aguilar1-8/+8
This makes mergetool consistent with Documentation/CodingGuidelines. Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-07difftool/mergetool: add diffuse as merge and diff toolLibravatar Sebastian Pipping1-2/+2
This adds diffuse as a built-in merge tool. Signed-off-by: Sebastian Pipping <sebastian@pipping.org> Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-07git-mergetool: add new merge tool TortoiseMergeLibravatar Markus Heidelberg1-3/+13
TortoiseMerge comes with TortoiseSVN or TortoiseGit for Windows. It can only be used as a merge tool with an existing base file. It cannot be used without a base nor as a diff tool. The documentation only mentions the slash '/' as command line option prefix, which refused to work, but the parser also accepts the dash '-' See http://code.google.com/p/msysgit/issues/detail?id=226 Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-07git-mergetool/difftool: make (g)vimdiff workable under WindowsLibravatar Markus Heidelberg1-2/+8
Under Windows vimdiff and gvimdiff are not available as symbolic links, but as batch files vimdiff.bat and gvimdiff.bat. These files weren't found by 'type vimdiff' which led to the following error: The merge tool vimdiff is not available as 'vimdiff' Even if they were found, it wouldn't work to invoke these batch files from git-mergetool. To solve this, use vim and gvim (vim.exe and gvim.exe) and pass the -d command line switch over to them. Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-05Merge branch 'cb/mergetool'Libravatar Junio C Hamano1-4/+11
* cb/mergetool: mergetool: fix running mergetool in sub-directories mergetool: Add a test for running mergetool in a sub-directory mergetool: respect autocrlf by using checkout-index
2009-01-31mergetool: fix running mergetool in sub-directoriesLibravatar Charles Bailey1-5/+4
The previous fix to mergetool to use checkout-index instead of cat-file broke running mergetool anywhere except the root of the repository. This fixes it by using the correct relative paths for temporary files and index paths. Signed-off-by: Charles Bailey <charles@hashpling.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-27mergetool: respect autocrlf by using checkout-indexLibravatar Charles Bailey1-3/+11
Previously, git mergetool used cat-file which does not perform git to worktree conversion. This changes mergetool to use git checkout-index instead which means that the temporary files used for mergetool use the correct line endings for the platform. Signed-off-by: Charles Bailey <charles@hashpling.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-27mergetool: Don't repeat merge tool candidatesLibravatar Johannes Gilger1-10/+8
git mergetool listed some candidates for mergetools twice, depending on the environment. This slightly changes the behavior when both KDE_FULL_SESSION and GNOME_DESKTOP_SESSION_ID are set at the same time; in such a case meld is used in favor of kdiff3 (the old code favored kdiff3 in such a case), but it should not matter in practice. Signed-off-by: Johannes Gilger <heipei@hackvalue.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-18mergetool: put the cursor on the editable file for VimLibravatar Markus Heidelberg1-2/+7
When resolving conflicts, you only need to edit the $MERGED file. Put the cursor automatically into its window for vimdiff and gvimdiff to avoid doing <C-w>l every time. Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Tested-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-01Merge branch 'cb/mergetool'Libravatar Junio C Hamano1-30/+80
* cb/mergetool: mergetool: Don't keep temporary merge files unless told to mergetool: Add prompt to continue after failing to merge a file Add -y/--no-prompt option to mergetool Fix some tab/space inconsistencies in git-mergetool.sh
2008-12-19git-mergetool: properly handle "git mergetool -- filename"Libravatar David Aguilar1-0/+1
Like many git commands, git-mergetool allows "--" to signal the end of option processing. This adds a missing "shift" statement so that this is correctly handled. Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-12mergetool: Don't keep temporary merge files unless told toLibravatar Charles Bailey1-0/+6
This changes git mergetool to remove the temporary files used to invoke the merge tool even if it returns non-zero. This also adds a configuration option (mergetool.keepTemporaries) to retain the previous behaviour if desired. Signed-off-by: Charles Bailey <charles@hashpling.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-12mergetool: Add prompt to continue after failing to merge a fileLibravatar Charles Bailey1-9/+43
This option stops git mergetool from aborting at the first failed merge. After a failed merge the user will be prompted to indicated whether he wishes to continue with attempting to merge subsequent paths or to abort. This allows some additional use patterns. Merge conflicts can now be previewed one at time and merges can also be skipped so that they can be performed in a later pass. Signed-off-by: Charles Bailey <charles@hashpling.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-14Add -y/--no-prompt option to mergetoolLibravatar Charles Bailey1-3/+13
This option lets git mergetool invoke the conflict resolution program without waiting for a user prompt each time. Also added a mergetool.prompt (default true) configuration variable controlling the same behaviour Signed-off-by: Charles Bailey <charles@hashpling.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-14Fix some tab/space inconsistencies in git-mergetool.shLibravatar Charles Bailey1-19/+19
git-mergetool.sh mostly uses 8 space tabs and 4 spaces per indent. This change corrects this in a part of the file affect by a later commit in this patch series. diff -w considers this change is to be a null change. Signed-off-by: Charles Bailey <charles@hashpling.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-19Remove the use of '--' in merge program invocationLibravatar Patrick Higgins1-12/+12
Put a "./" at the beginning of all paths given to the merge program so that filenames beginning with a '-' character don't get interpreted as options. This deals with a problem where kdiff3 can be compiled with or without support for the '--' separator between options and filenames. Signed-off-by: Patrick Higgins <patrick.higgins@cexp.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-11mergetool: Make ECMerge use the settings as specified by the user in the GUILibravatar Sebastian Schuberth1-2/+2
When run from the command line, ECMerge does not automatically use the same settings for a merge / diff that it would use when starting the GUI and loading files manually. In the first case the built-in factory defaults would be used, while in the second case the settings the user has specified in the GUI would be used, which can be misleading. Specifying the "--default" command line option changes this behavior so that always the user specfified GUI settings are used. Signed-off-by: Sebastian Schuberth <sschuberth@visageimaging.com> Tested-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-05Teach git mergetool to use custom commands defined at config timeLibravatar Charles Bailey1-2/+26
Currently git mergetool is restricted to a set of commands defined in the script. You can subvert the mergetool.<tool>.path to force git mergetool to use a different command, but if you have a command whose invocation syntax does not match one of the current tools then you would have to write a wrapper script for it. This patch adds two git config variable patterns which allow a more flexible choice of merge tool. If you run git mergetool with -t/--tool or the merge.tool config variable set to an unrecognized tool then git mergetool will query the mergetool.<tool>.cmd config variable. If this variable exists, then git mergetool will treat the specified tool as a custom command and will use a shell eval to run the command with the documented shell variables set. mergetool.<tool>.trustExitCode can be used to indicate that the exit code of the custom command can be used to determine the success of the merge. Signed-off-by: Charles Bailey <charles@hashpling.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-05Changed an internal variable of mergetool to support custom commandsLibravatar Charles Bailey1-50/+50
The variable $path changes to $MERGED so that it is more consistent with $BASE, $LOCAL and $REMOTE for future custom command lines. Signed-off-by: Charles Bailey <charles@hashpling.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-05Tidy up git mergetool's backup file behaviourLibravatar Charles Bailey1-24/+13
Currently a backup pre-merge file with conflict markers is sometimes kept with a .orig extenstion and sometimes removed depending on the particular merge tool used. This patch makes the handling consistent across all merge tools and configurable via a new mergetool.keepBackup config variable Signed-off-by: Charles Bailey <charles@hashpling.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>