| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When the index has conflicted submodules, mergetool used to mildly
clobber the module, renaming it to mymodule.BACKUP.nnnn, then failing to
copy it non-recursively.
Recognize submodules and offer a resolution instead:
Submodule merge conflict for 'Shared':
{local}: submodule commit ad9f12e3e6205381bf2163a793d1e596a9e211d0
{remote}: submodule commit f5893fb70ec5646efcd9aa643c5136753ac89253
Use (l)ocal or (r)emote, or (a)bort?
Selecting a commit will stage it, but not update the submodule (as git
does had there been no conflict). Type changes are also supported,
should the path be a submodule on one side, and a file, symlink,
directory, or deleted on the other.
Signed-off-by: Jonathon Mah <me@JonathonMah.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since bb0a484 (mergetool: Skip autoresolved paths, 2010-08-17),
mergetool uses different ways of figuring out the list of files with
merge conflicts depending on whether rerere is active. If rerere is
active, mergetool will use 'git rerere status' to list the files with
remaining conflicts. However, the output from that command does not
list conflicts of types that rerere does not handle, such as
modify/remove conflicts.
Another problem with solely relying on the output from 'git rerere
status' is that, for new conflicts that are not yet known to rerere,
the output from the command will list the files even after adding them
to the index. This means that if the conflicts in some files have been
resolved and 'git mergetool' is run again, it will ask the user
something like the following for each of those files.
file1: file does not need merging
Continue merging other unresolved paths (y/n) ?
Solve both of these problems by replacing the call to 'git rerere
status' with a call to the new 'git rerere remaining' that was
introduced in the previous commit.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cb/maint-mergetool-no-tty:
mergetool: Remove explicit references to /dev/tty
Conflicts:
git-mergetool.sh
|
|
mergetool used /dev/tty to switch back to receiving input from the user
via inside a block with a redirected stdin.
This harms testability, so change mergetool to save its original stdin
to an alternative fd in this block and restore it for those sub-commands
that need the original stdin.
Includes additional compatibility fix from Jonathan Nieder.
Tested-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When mergetool is run without path limiters it loops
over each entry in 'git ls-files -u'. This includes
autoresolved paths.
Teach mergetool to only merge files listed in 'rerere status'
when rerere is enabled.
There are some subtle but harmless changes in behavior.
We now call cd_to_toplevel when no paths are given.
We do this because 'rerere status' paths are always relative
to the root. This is beneficial for the non-rerere use as
well in that mergetool now runs against all unmerged files
regardless of the current directory.
This also slightly tweaks the output when run without paths
to be more readable.
The old output:
Merging the files: foo
bar
baz
The new output:
Merging:
foo
bar
baz
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The mergetool--lib scriplet was tricky to use because it relied upon
the existance of several global shell variables. This removes more
global variables so that things are simpler for callers.
A side effect is that some variables are recomputed each time
run_merge_tool() is called, but the overhead for recomputing
them is justified by the simpler implementation.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In several places mergetool.keepBackup was misspelled as merge.keepBackup.
Signed-off-by: Ferry Huberts <ferry.huberts@pelagic.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This consolidates the common functionality from git-mergetool and
git-difftool--helper into a single git-mergetool--lib scriptlet.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes mergetool consistent with Documentation/CodingGuidelines.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds diffuse as a built-in merge tool.
Signed-off-by: Sebastian Pipping <sebastian@pipping.org>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
TortoiseMerge comes with TortoiseSVN or TortoiseGit for Windows. It can
only be used as a merge tool with an existing base file. It cannot be
used without a base nor as a diff tool.
The documentation only mentions the slash '/' as command line option
prefix, which refused to work, but the parser also accepts the dash '-'
See http://code.google.com/p/msysgit/issues/detail?id=226
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Under Windows vimdiff and gvimdiff are not available as symbolic links,
but as batch files vimdiff.bat and gvimdiff.bat. These files weren't
found by 'type vimdiff' which led to the following error:
The merge tool vimdiff is not available as 'vimdiff'
Even if they were found, it wouldn't work to invoke these batch files
from git-mergetool.
To solve this, use vim and gvim (vim.exe and gvim.exe) and pass the -d
command line switch over to them.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cb/mergetool:
mergetool: fix running mergetool in sub-directories
mergetool: Add a test for running mergetool in a sub-directory
mergetool: respect autocrlf by using checkout-index
|
|
The previous fix to mergetool to use checkout-index instead of cat-file
broke running mergetool anywhere except the root of the repository.
This fixes it by using the correct relative paths for temporary files
and index paths.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, git mergetool used cat-file which does not perform git to
worktree conversion. This changes mergetool to use git checkout-index
instead which means that the temporary files used for mergetool use the
correct line endings for the platform.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git mergetool listed some candidates for mergetools twice, depending on
the environment.
This slightly changes the behavior when both KDE_FULL_SESSION and
GNOME_DESKTOP_SESSION_ID are set at the same time; in such a case
meld is used in favor of kdiff3 (the old code favored kdiff3 in such a
case), but it should not matter in practice.
Signed-off-by: Johannes Gilger <heipei@hackvalue.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When resolving conflicts, you only need to edit the $MERGED file. Put
the cursor automatically into its window for vimdiff and gvimdiff to
avoid doing <C-w>l every time.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Tested-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cb/mergetool:
mergetool: Don't keep temporary merge files unless told to
mergetool: Add prompt to continue after failing to merge a file
Add -y/--no-prompt option to mergetool
Fix some tab/space inconsistencies in git-mergetool.sh
|
|
Like many git commands, git-mergetool allows "--" to signal
the end of option processing. This adds a missing "shift"
statement so that this is correctly handled.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This changes git mergetool to remove the temporary files used to invoke
the merge tool even if it returns non-zero.
This also adds a configuration option (mergetool.keepTemporaries) to
retain the previous behaviour if desired.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This option stops git mergetool from aborting at the first failed merge.
After a failed merge the user will be prompted to indicated whether he
wishes to continue with attempting to merge subsequent paths or to
abort.
This allows some additional use patterns. Merge conflicts can now be
previewed one at time and merges can also be skipped so that they can be
performed in a later pass.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This option lets git mergetool invoke the conflict resolution program
without waiting for a user prompt each time.
Also added a mergetool.prompt (default true) configuration variable
controlling the same behaviour
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-mergetool.sh mostly uses 8 space tabs and 4 spaces per indent. This
change corrects this in a part of the file affect by a later commit in
this patch series. diff -w considers this change is to be a null change.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Put a "./" at the beginning of all paths given to the merge program so
that filenames beginning with a '-' character don't get interpreted as
options.
This deals with a problem where kdiff3 can be compiled with or without
support for the '--' separator between options and filenames.
Signed-off-by: Patrick Higgins <patrick.higgins@cexp.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When run from the command line, ECMerge does not automatically use the same
settings for a merge / diff that it would use when starting the GUI and loading
files manually. In the first case the built-in factory defaults would be used,
while in the second case the settings the user has specified in the GUI would
be used, which can be misleading. Specifying the "--default" command line
option changes this behavior so that always the user specfified GUI settings
are used.
Signed-off-by: Sebastian Schuberth <sschuberth@visageimaging.com>
Tested-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently git mergetool is restricted to a set of commands defined
in the script. You can subvert the mergetool.<tool>.path to force
git mergetool to use a different command, but if you have a command
whose invocation syntax does not match one of the current tools then
you would have to write a wrapper script for it.
This patch adds two git config variable patterns which allow a more
flexible choice of merge tool.
If you run git mergetool with -t/--tool or the merge.tool config
variable set to an unrecognized tool then git mergetool will query the
mergetool.<tool>.cmd config variable. If this variable exists, then git
mergetool will treat the specified tool as a custom command and will use
a shell eval to run the command with the documented shell variables set.
mergetool.<tool>.trustExitCode can be used to indicate that the exit
code of the custom command can be used to determine the success of the
merge.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The variable $path changes to $MERGED so that it is more consistent
with $BASE, $LOCAL and $REMOTE for future custom command lines.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently a backup pre-merge file with conflict markers is sometimes
kept with a .orig extenstion and sometimes removed depending on the
particular merge tool used.
This patch makes the handling consistent across all merge tools and
configurable via a new mergetool.keepBackup config variable
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Rogan Dawes <rogan@dawes.za.net>
|
|
Before this change, conflicted files were open in external merge tool with
temporary filenames like REMOTE.$$ and LOCAL.$$. This way meld was unable
to recognize these files and syntax highlighting feature was unusable.
Help such merge tools by giving temporar files the same extension as the
original.
Signed-off-by: Pini Reznik <pinir@expand.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
--text follows this line--
These commands currently lack OPTIONS_SPEC; allow people to
easily list with "git grep 'OPTIONS_SPEC=$'" what they can help
improving.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If no mergetool is configured in the configuration variable
merge.tool the resetting message should not be printed.
This is fixed. The message is only printed if a tool is configured
but the entry in merge.tool is invalid.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Add support to mergetool for ECMerge available from
http://www.elliecomputing.com/Products/merge_overview.asp
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
This commit adds a mechanism to provide absolute paths to the
external programs called by 'git mergetool'. A path can be
specified in the configuation variable mergetool.<tool>.path.
The configuration variable is similar to how we name branches
and remotes. It is extensible if we need to specify more details
about a tool.
The mechanism is especially useful on Windows, where external
programs are unlikely to be in PATH.
[sp: Fixed a few minor issues prior to applying]
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Fix missing double hyphens in "-L1" and "-L2"
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Only pass the basename of the output filename when to emerge, since
emerge interprets non-absolute pathnames relative to the containing
directory of the output buffer.
Thanks to Kelvie Wong for pointing this out.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
When mergetool is run from a subdirectory, "ls-files -u" nicely
limits the output to conflicted files in that directory, but
we need to give the full path to cat-file plumbing to grab the
contents of stages.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
A lot of shell scripts contained stuff starting with
while case "$#" in 0) break ;; esac
and similar. I consider breaking out of the condition instead of the
body od the loop ugly, and the implied "true" value of the
non-matching case is not really obvious to humans at first glance. It
happens not to be obvious to some BSD shells, either, but that's
because they are not POSIX-compliant. In most cases, this has been
replaced by a straight condition using "test". "case" has the
advantage of being faster than "test" on vintage shells where "test"
is not a builtin. Since none of them is likely to run the git
scripts, anyway, the added readability should be worth the change.
A few loops have had their termination condition expressed
differently.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This uses the remove-dashes target to replace "git-frotz" to "git frotz".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make git-mergetool prefer meld under GNOME, and kdiff3 under KDE. When
considering emerge and vimdiff, check $VISUAL and $EDITOR to see which the
user might prefer.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Josh Triplett <josh@freedesktop.org>
|
|
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes complaints from Junio for how messages and prompts are
printed when resolving symlink and deleted file merges.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Create common function check_unchanged(), save_backup() and
remove_backup().
Also fix some minor whitespace issues while we're at it.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
Jonathon Mah
Martin von Zweigbergk
Junio C Hamano
Charles Bailey
David Aguilar
Ferry Huberts
Sebastian Pipping
Markus Heidelberg
Johannes Gilger
Patrick Higgins
Sebastian Schuberth
Rogan Dawes
Pini Reznik
Steffen Prohaska
Theodore Ts'o
David Kastrup
Dan McGee
Josh Triplett