| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-instaweb relied on a pipe in a sed script, but this is not supported
by MacOS X sed when using BREs. git-instaweb relies on a working perl
in any case, and perl re are more consistent between platforms, so
replace sed invocation with an equivalent perl invocation.
Also, fix the documented -b "" to work without giving a spurious 'command
not found' error.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now "git-instaweb" will try to use the browser configured as
"web.browser", if "instaweb.browser" is not set.
"git-browse-help" will check first "help.browser" and then
"web.browser".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ph/parseopt-sh:
git-quiltimport.sh fix --patches handling
git-am: -i does not take a string parameter.
sh-setup: don't let eval output to be shell-expanded.
git-sh-setup: fix parseopt `eval` string underquoting
Give git-am back the ability to add Signed-off-by lines.
git-rev-parse --parseopt
scripts: Add placeholders for OPTIONS_SPEC
Migrate git-repack.sh to use git-rev-parse --parseopt
Migrate git-quiltimport.sh to use git-rev-parse --parseopt
Migrate git-checkout.sh to use git-rev-parse --parseopt --keep-dashdash
Migrate git-instaweb.sh to use git-rev-parse --parseopt
Migrate git-merge.sh to use git-rev-parse --parseopt
Migrate git-am.sh to use git-rev-parse --parseopt
Migrate git-clone to use git-rev-parse --parseopt
Migrate git-clean.sh to use git-rev-parse --parseopt.
Update git-sh-setup(1) to allow transparent use of git-rev-parse --parseopt
Add a parseopt mode to git-rev-parse to bring parse-options to shell scripts.
|
|
* maint:
Start preparing for 1.5.3.6
git-send-email: Change the prompt for the subject of the initial message.
SubmittingPatches: improve the 'Patch:' section of the checklist
instaweb: Minor cleanups and fixes for potential problems
stop t1400 hiding errors in tests
Makefile: add missing dependency on wt-status.h
refresh_index_quietly(): express "optional" nature of index writing better
Fix sed string regex escaping in module_name.
Avoid a few unportable, needlessly nested "...`...".
git-mailsplit: with maildirs not only process cur/, but also new/
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix path quoting and test of empty values that some shells do not like.
Remove duplicate check and setting of $browser.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Document additional 1.5.3.5 fixes in release notes
Avoid 'expr index' on Mac OS X as it isn't supported
filter-branch: update current branch when rewritten
fix filter-branch documentation
helpful error message when send-pack finds no refs in common.
Fix setup_git_directory_gently() with relative GIT_DIR & GIT_WORK_TREE
Correct typos in release notes for 1.5.3.5
|
|
This fixes git-instaweb so it can start an httpd without warning
about an invalid test command. Yes its ugly, but its also quite
portable.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
running the webrick server with git requires Ruby and Ruby's YAML and
Webrick libraries (both of which come standard with Ruby). nice for
single-user standalone invocations.
the --httpd=webrick option generates a ruby script on the fly to read
httpd.conf options and invoke the web server via library call. this
script is placed in the .git/gitweb directory. it also generates a
shell script in a feeble attempt to invoke ruby in a portable manner,
which assumes that 'ruby' is in the user's $PATH.
Signed-off-by: Mike Dalessio <mike@csa.net>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
this patch allows scripts that reside in $fqgitdir/gitweb to be used
for firing up an instaweb server. this lays the groundwork for
extending instaweb support to non-standard web servers, which may
require a script for proper invocation.
Signed-off-by: Mike Dalessio <mike@csa.net>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
A lot of shell scripts contained stuff starting with
while case "$#" in 0) break ;; esac
and similar. I consider breaking out of the condition instead of the
body od the loop ugly, and the implied "true" value of the
non-matching case is not really obvious to humans at first glance. It
happens not to be obvious to some BSD shells, either, but that's
because they are not POSIX-compliant. In most cases, this has been
replaced by a straight condition using "test". "case" has the
advantage of being faster than "test" on vintage shells where "test"
is not a builtin. Since none of them is likely to run the git
scripts, anyway, the added readability should be worth the change.
A few loops have had their termination condition expressed
differently.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Quite a few of the scripts are rather careless about using GIT_DIR
while changing directories.
Some try their hands (with different likelihood of success) in making
GIT_DIR absolute.
This patch lets git-sh-setup.sh cater for absolute directories (in a
way that should work reliably also with non-Unix path names) and
removes the respective kludges in git-filter-branch.sh and
git-instaweb.sh.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Tom Prince <tom.prince@ualberta.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Fredrik Kuivinen <frekui@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
I've noticed that Apache 2.2 on a Debian etch machine has
these compiled as modules.
Also set ServerName to avoid a warning at startup.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
So test for it, and do not always try to load mod_cgi.o.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The only visible change is that git-blame doesn't understand
"--compability" anymore, but it does accept "--compatibility" instead,
which is already documented.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Hint taken from Johannes. I've tested this with sed --posix on
my system with GNU sed and it works fine with and also without
it. Further portability testing/review would be good.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
I got tired of having to configure gitweb for every repository
I work on. I sometimes prefer gitweb to standard GUIs like gitk
or gitview; so this lets me automatically configure gitweb to
browse my working repository and also opens my browser to it.
Updates from the original patch:
Added Apache/mod_perl2 compatibility if Dennis Stosberg's gitweb
has been applied, too: <20060621130708.Gcbc6e5c@leonov.stosberg.net>
General cleanups in shell code usage.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Christian Couder
Charles Bailey
Junio C Hamano
Jonas Fonseca
Pierre Habouzit
Shawn O. Pearce
Mike Dalessio
David Kastrup
Tom Prince
Fredrik Kuivinen
Eric Wong
Johannes Schindelin
Pavel Roskin