| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Use the file described by commit.template (if set) to show the commit message
template, just like other GUIs.
Signed-off-by: Martin Schön <Martin.Schoen@loewensteinmedical.de>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
|
|
In 4e55d19 (git-gui: Cleanup end-of-line whitespace in commit messages.,
2007-01-25), the logic to decide if GITGUI_MSG should be saved or
deleted was updated to not require the commit message buffer to be
modified. This fixes a situation where if the user quits and restarts
git-gui multiple times the commit message buffer was lost.
Unfortunately, the fix was not quite correct. The check for whether the
commit message buffer has been modified is useless. If the commit is
_not_ amend, then the check is never performed. If the commit is amend,
then saving the message does not matter anyway. Amend state is destroyed
on exit and the next time git-gui is opened it starts from scratch, but
with the older message retained in the buffer. If amend is selected,
the current message is over-written by the amend commit's message.
The correct fix would be to not touch GITGUI_MSG at all if the commit
message buffer is not modified. This way, the file is not deleted even
on multiple restarts. It has the added benefit of not writing the file
unnecessarily on every exit.
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
|
|
The colors of some ttext widgets are hard-coded. These hard-coded colors
are okay with a light theme but with a dark theme some widgets are dark
colored and the hard-coded ones are still light. This defeats the
purpose of applying the theme and makes the UI look very awkward.
Remove the hard-coded colors in ttext calls and use colors from the
theme for those widgets via Text.Background and Text.Foreground from the
option database.
Similarly, the highlighting for the currently selected file(s) in the
"Staged Files" and "Unstaged Files" sections is also hard-coded. Pull
the colors for that from the current theme to make sure it is in line
Signed-off-by: Serg Tereshchenko <serg.partizan@gmail.com>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
|
|
Spaces are replaced with tabs when possible. In some cases just
replacing spaces with tabs would break readability, so it was left as it
is.
Signed-off-by: Serg Tereshchenko <serg.partizan@gmail.com>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
|
|
- Control+BackSpace: Delete word to the left of the cursor.
- Control+Delete : Delete word to the right of the cursor.
Originally introduced by BRIEF and Turbo Vision between 1985 and 1992,
they were adopted by most CUA-Compliant UIs, including those of: OS/2,
Windows, Mac OS, Qt, GTK, Open/Libre Office, Gecko, and GNU Emacs.
In both cases Tk already implements the functionality bound to other key
combination, so we use that.
Graphical examples:
Deleting to the left:
v------ pointer
X_WORD____X
^-----^------ selection
Deleting to the right:
v--------- pointer
X_WORD_X
^--^------ selection
Signed-off-by: Ismael Luceno <ismael.luceno@tttech-auto.com>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
|
|
For some asynchronous operations, we build a chain of callbacks to
execute when the operation is done. These callbacks are held in $after,
and a new callback can be added by appending to $after. Once the
operation is done, $after is executed as a script.
But if we don't append a semi-colon after the procedure calls, they will
appear to Tcl as arguments to the previous procedure's arguments. So,
for example, if $after is "foo", and we just append "bar", then $after
becomes "foo bar", and bar will be treated as an argument to foo. If foo
does not accept any optional arguments, it would result in Tcl throwing
an error. If instead we do append a semi-colon, $after will look like
"foo;bar;", and these will be treated as two separate procedure calls.
Before d9c6469 (git-gui: update status bar to track operations,
2019-12-01), this problem was masked because ui_ready/ui_status did
accept an optional argument. In d9c6469, ui_ready stopped accepting an
optional argument, and this error started showing up.
Another instance of this problem is when a call to ui_status without a
trailing semicolon. ui_status never accepted an optional argument to
begin with, but the issue never managed to surface.
So, fix these errors by making sure we always append a semi-colon after
procedure calls when multiple callbacks are involved in $after.
Helped-by: Pratyush Yadav <me@yadavpratyush.com>
Signed-off-by: Ansgar Röber <ansgar.roeber@rwth-aachen.de>
|
|
Reduce the Tcl version requirement to 8.5 to allow git-gui to run on
MacOS distributions like High Sierra. While here, fix a potential
variable name collision.
* py/remove-tcloo:
git-gui: create a new namespace for chord script evaluation
git-gui: reduce Tcl version requirement from 8.6 to 8.5
|
|
On some MacOS distributions like High Sierra, Tcl 8.5 is shipped by
default. This makes git-gui error out at startup because of the version
mismatch.
The only part that requires Tcl 8.6 is SimpleChord, which depends on
TclOO. So, don't use it and use our homegrown class.tcl instead.
This means some slight syntax changes. Since class.tcl doesn't have an
"unknown" method like TclOO does, we can't just call '$note', but have
to use '$note activate' instead. The constructor now needs a proper
namespace qualifier. Update the documentation to reflect the new syntax.
As of now, the only part of git-gui that needs Tcl 8.5 is a call to
'apply' in lib/index.tcl::lambda. Keep using it until someone shows up
shouting that their OS ships with 8.4 only. Then we would have to look
into implementing it in pure Tcl.
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
|
|
In d9c6469 (git-gui: update status bar to track operations, 2019-12-01)
the call to 'ui_status' in 'do_gitk' was updated to create the newly
introduced "status bar operation". This allowed this status text to show
along with other operations happening in parallel, and removed a race
between all these operations.
But in that refactor, the fact that 'ui_status' checks for the existence
of 'main_status' was overlooked. This leads to an error message popping
up when the user selects "Show History Context" from the blame window
context menu on a source line. The error occurs because when running
"blame" 'main_status' is not initialized.
So, add a check for the existence of 'main_status' in 'do_gitk'. This
fix reverts to the original behaviour. In the future, we might want to
look into a better way of telling 'do_gitk' which status bar to use.
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
|
|
Many times there's the need to quickly open a source file (the one you're
looking at in Git GUI) in the predefined text editor / IDE. Of course,
the file can be searched for in your preferred file manager or directly
in the text editor, but having the option to directly open the current
file from Git GUI would be just faster. This change enables just that by:
- clicking the diff header path (which is now highlighted as a hyperlink)
- or diff header path context menu -> Open
Note: executable files will be run and not opened for editing.
Signed-off-by: Zoli Szabó <zoli.szabo@gmail.com>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
|
|
After "git checkout -b '漢字'" to create a branch with UTF-8 character
in it, "git gui" shows the branch name incorrectly, as it forgets to
turn the bytes read from the "git for-each-ref" and read from "HEAD"
file into Unicode characters.
Signed-off-by: Kazuhiro Kato <kato-k@ksysllc.co.jp>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
|
|
Update the revert_helper proc to check for untracked files as well as
changes, and then handle changes to be reverted and untracked files with
independent blocks of code. Prompt the user independently for untracked
files, since the underlying action is fundamentally different (rm -f).
If after deleting untracked files, the directory containing them becomes
empty, then remove the directory as well. Migrate unlocking of the index
out of _close_updateindex to a responsibility of the caller, to permit
paths that don't directly unlock the index, and refactor the error
handling added in d4e890e5 so that callers can make flow control
decisions in the event of errors. Update Tcl/Tk dependency from 8.4 to
8.6 in git-gui.sh.
A new proc delete_files takes care of actually deleting the files in
batches, using the Tcler's Wiki recommended approach for keeping the UI
responsive.
Since the checkout_index and delete_files calls are both asynchronous
and could potentially complete in any order, a "chord" is used to
coordinate unlocking the index and returning the UI to a usable state
only after both operations are complete. The `SimpleChord` class,
based on TclOO (Tcl/Tk 8.6), is added in this commit.
Signed-off-by: Jonathan Gilbert <JonathanG@iQmetrix.com>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
|
|
Update the status bar to track updates as individual "operations" that
can overlap. Update all call sites to interact with the new status bar
mechanism. Update initialization to explicitly clear status text,
since otherwise it may persist across future operations.
Signed-off-by: Jonathan Gilbert <JonathanG@iQmetrix.com>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
|
|
git-gui now highlights diff3 style conflicts properly. As an auxiliary
change, querying a path's attribute is done via the existing interface
instead of hand-rolling the code.
* bw/diff3-conflict-style:
git-gui: support for diff3 conflict style
git-gui: use existing interface to query a path's attribute
|
|
This adds highlight support for the diff3 conflict style.
The common pre-image will be reversed to --, because it has been removed
and replaced with ours or theirs side respectively.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
|
|
Git for Windows 2.x ships with an executable that starts the Git Bash
with all the environment variables and what not properly set up. It is
also adjusted according to the Terminal emulator option chosen when
installing Git for Windows (while `bash.exe --login -i` would always
launch with Windows' default console).
So let's use that executable (usually C:\Program Files\Git\git-bash.exe)
instead of `bash.exe --login -i` if its presence was detected.
This fixes https://github.com/git-for-windows/git/issues/490
Signed-off-by: Thomas Kläger <thomas.klaeger@10a.ch>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
|
|
'jn/reproducible-build', 'ls/no-double-utf8-author-name', 'js/misc-git-gui-stuff', 'bb/ssh-key-files', 'bp/bind-kp-enter', 'cb/ttk-style' and 'py/call-do-quit-before-exit' of ../git into py/git-git-extra-stuff
|
|
Toggle amend on and off with the keyboard shortcut "Ctrl+e".
* bp/amend-toggle-bind:
git-gui: add hotkey to toggle "Amend Last Commit"
|
|
Selecting whether to "Amend Last Commit" or not does not have a hotkey.
With this patch, the user may toggle between the two options with
CTRL/CMD+e.
Signed-off-by: Birger Skogeng Pedersen <birger.sp@gmail.com>
Rebased-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
|
|
Add a scrollbar at the bottom of the commit message buffer.
* bw/commit-scrollbuffer:
git-gui: add horizontal scrollbar to commit buffer
|
|
While the commit message widget has a configurable fixed width, it
nevertheless allowed to write commit messages which exceeded this limit.
Though there is no visual clue, that there is scrolling going on. Now
there is a horizontal scrollbar.
There seems to be a bug in at least Tcl/Tk up to version 8.6.8, which
does not update the horizontal scrollbar if one removes the whole
content at once.
Suggested-by: Birger Skogeng Pedersen <birger.sp@gmail.com>
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
|
|
Its a bi-state anyway and also saves one line in the menu.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
|
|
git-gui learned to revert selected lines and hunks, just like it can
stage selected lines and hunks. To provide a safety net for accidental
revert, the most recent revert can be undone.
* py/revert-hunks-lines:
git-gui: allow undoing last revert
git-gui: return early when patch fails to apply
git-gui: allow reverting selected hunk
git-gui: allow reverting selected lines
|
|
The user cannot change focus between the list of files, the diff view and
the commit message widgets without using the mouse (clicking either of
the four widgets).
With this patch, the user may set ui focus to the previously selected path
in either the "Unstaged Changes" or "Staged Changes" widgets, using
ALT+1 or ALT+2.
The user may also set the ui focus to the diff view widget with
ALT+3, or to the commit message widget with ALT+4.
This enables the user to select/unselect files, view the diff and create a
commit in git-gui using keyboard-only.
Signed-off-by: Birger Skogeng Pedersen <birger.sp@gmail.com>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
|
|
Accidental clicks on the revert hunk/lines buttons can cause loss of
work, and can be frustrating. So, allow undoing the last revert.
Right now, a stack or deque are not being used for the sake of
simplicity, so only one undo is possible. Any reverts before the
previous one are lost.
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
|
|
Just like the user can select a hunk to stage or unstage, add the
ability to revert hunks.
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
|
|
Just like the user can select lines to stage or unstage, add the
ability to revert selected lines.
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
|
|
If the toplevel window for the window being destroyed is the main window
(aka "."), then simply destroying it means the cleanup tasks are not
executed (like saving the commit message buffer, saving window state,
etc.)
All this is handled by do_quit. Call it instead of directly
destroying the main window. For other toplevel windows, the old
behavior remains.
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
CTRL/CMD+ENTER is bound to do_commit, but this did not apply for the
(numpad ENTER) key. To enable CTRL/CMD+ENTER and CTRL/CMD+(numpad ENTER)
to yield the same behaviour, CTRL/CMD+(numpad enter) has also been bound
to do_commit.
Signed-off-by: Birger Skogeng Pedersen <birgersp@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is possible to select multiple files in the "Unstaged Changes" and
the "Staged Changes" lists. But when hitting Ctrl+T, surprisingly only
one entry is handled, not all selected ones.
Let's just use the same code path as for the "Stage To Commit" and the
"Unstage From Commit" menu items.
This fixes https://github.com/git-for-windows/git/issues/1012
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If there is nothing to stage, there is nothing to stage. Let's not try
to, even if the file list contains nothing at all.
This fixes https://github.com/git-for-windows/git/issues/1075
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously unstaged files can be staged by clicking on them and then
pressing Ctrl+T. Conveniently, the next unstaged file is selected
automatically so that the unstaged files can be staged by repeatedly
pressing Ctrl+T.
When a user hits Ctrl+T one time too many, though, Git GUI used to throw
this exception:
expected number but got ""
expected number but got ""
while executing
"expr {int([lindex [$w tag ranges in_diff] 0])}"
(procedure "toggle_or_diff" line 13)
invoked from within
"toggle_or_diff toggle .vpane.files.workdir.list "
(command bound to event)
Let's just avoid that by skipping the operation when there are no more
files to stage.
This fixes https://github.com/git-for-windows/git/issues/1060
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The mailing address for the FSF has changed over the years. Rather than
updating the address across all files, refer readers to gnu.org, as the
GNU GPL documentation now suggests for license notices. The mailing
address is retained in the full license files (COPYING and LGPL-2.1).
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we use 'eval exec $opt $cmdp $args' to execute git command,
tcl engine will convert the output of the git comand with the rule
system default code page to unicode.
But cp936 -> unicode conversion implicitly done by exec is not reversible.
So we have to use git_read instead.
Bug report and an original reproducer by Cloud Chou:
https://github.com/msysgit/git/issues/302
Cloud Chou find the reason of the bug.
Thanks-to: Johannes Schindelin <johannes.schindelin@gmx.de>
Thanks-to: Pat Thoyts <patthoyts@users.sourceforge.net>
Reported-by: Cloud Chou <515312382@qq.com>
Original-test-by: Cloud Chou <515312382@qq.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Cloud Chou <515312382@qq.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
|
|
Assumes file names in git tree objects are UTF-8 encoded.
On most unix systems, the system encoding (and thus the TCL system
encoding) will be UTF-8, so file names will be displayed correctly.
On Windows, it is impossible to set the system encoding to UTF-8. Changing
the TCL system encoding (via 'encoding system ...', e.g. in the startup
code) is explicitly discouraged by the TCL docs.
Change git-gui functions dealing with file names to always convert
from and to UTF-8.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
|
|
Mark command-line "usage:" string for translation in git-gui.sh.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
|
|
|
|
|
|
This fix refers https://github.com/git-for-windows/git/issues/664
After `git merge --squash` git creates .git/SQUASH_MSG (UTF-8 encoded)
which contains squashed commits. When run `git gui` it copies SQUASH_MSG
to PREPARE_COMMIT_MSG, but without honoring UTF-8. This leads to encoding
problems on `git gui` commit prompt.
The same applies on git cherry-pick conflict, where MERGE_MSG is created
and then is copied to PREPARE_COMMIT_MSG.
In both cases PREPARE_COMMIT_MSG must be configured to store data in UTF-8.
Signed-off-by: yaras <yaras6@gmail.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
|
|
MSys2 might *look* like Cygwin, but it is *not* Cygwin... Unless it
is run with `MSYSTEM=MSYS`, that is.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
|
|
Tab order follows widget creation order (and Z-order) so amend this to
match the layout more logically.
For keyboard selection a highlight around the selected text widget is
useful. Customized on Windows themed Tk to follow the native theme more
closely with a custom EntryFrame style.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
|
|
Keyboard focus was restricted to the commit message widget and users were
forced to use the mouse to select files in the workdir widget and only then
could use a key combination to stage the file.
It is now possible to use key navigation (Ctrl-Tab, arrow keys and Ctrl-T
or Ctrl-U) to stage and unstage files.
Suggested by @koppor in git-for-window/git issue #859
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
|
|
Tcl 8.5 introduced an extended vsatisfies syntax that is not
supported by Tcl 8.4.
Since only Tcl 8.4 is required this presents a problem.
The extended syntax was used starting with Git 2.0.0 in commit
b3f0c5c0 (git-gui: tolerate major version changes when comparing the
git version, 2014-05-17), so that a major version change would still
satisfy the condition.
However, what we really want is just a basic version compare, so use
vcompare instead to restore compatibility with Tcl 8.4.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
|
|
gui.maxfilesdisplayed (added in dd6451f9c7c5a36d3006231b618ac6da06c7c7b4)
was applied brute force on the file list in alphabetic order. As a result,
files that had modifications might not be displayed by git-gui. Even
worse, files that are already in the index might not be displayed, which
makes git-gui hard to use in some workflows.
This fix changes the meaning of gui.maxfilesdisplayed, making it a soft
limit that only applies to "_O" files, i.e. files that are "Untracked,
not staged".
Signed-off-by: Csaba Kiraly <kiraly@disi.unitn.it>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
|
|
After setting GITGUI_VERBOSE to enable load tracing the source command is
redefined but fails if the git installation path has spaces. Fixed quoting
by using lists to handle the arguments.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
|
|
Windows does not necessarily mean Cygwin, it could also be MSYS. The
latter ships with a version of "kill" that does not understand "-f". In
msysgit this was addressed shipping Cygwin's version of kill.
Properly fix this by using the stock Windows "taskkill" command instead,
which is available since Windows XP Professional.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
|
|
For Tk 8.5 the "wordprocessor" mode allows us to get a bit fancy for merge
diffs and intend the tabs by one to compensate for the additional diff
marker at the line start.
The code is heavily based on how gitk handles tabs.
Signed-off-by: Michael Lutz <michi@icosahedron.de>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
|
|
Introduce the GIT_GUI_LIB_DIR environment variable, to tell git-gui
where to look for TCL libs. This allows a git-gui which has been
built with a prefix of /foo to be run out of directory /bar. This is
the equivalent of GIT_EXEC_PATH or GITPERLLIB but for git-gui's TCL
libraries.
Signed-off-by: David Turner <dturner@twitter.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
|
|
Since git 2.0.0 starting git gui in a submodule using a gitfile fails with
the following error:
No working directory ../../../<path>
couldn't change working directory
to "../../../<path>": no such file or
directory
This is because "git rev-parse --show-toplevel" is only run when git gui
sees a git version of at least 1.7.0 (which is the version in which the
--show-toplevel option was introduced). But "package vsatisfies" returns
false when the major version changes, which is not what we want here.
Fix that for both places where the git version is checked using vsatisfies
by appending a '-' to the version number. This tells vsatisfies that a
change of the major version is not considered to be a problem, as long as
the new major version is larger. This is done for both the place that
caused the reported bug and another spot where the git version is tested
for another feature.
Reported-by: Chris Packham <judge.packham@gmail.com>
Reported-by: Yann Dirson <ydirson@free.fr>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
|
|
Currently setting submodule.<name>.ignore and/or diff.ignoreSubmodules to
"all" suppresses all output of submodule changes for git-gui. This is
really confusing, as even when the user chooses to record a new commit for
an ignored submodule by adding it manually this change won't show up under
"Staged Changes (Will Commit)".
Fix that by using the '--ignore-submodules=dirty' option for both callers
of "git diff-index --cached" when the underlying git version supports that
option.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
|
Martin Schön
Pratyush Yadav
Serg Tereshchenko
Ismael Luceno
Ansgar Röber
Zoli Szabó
Kazuhiro Kato
Jonathan Gilbert
Bert Wesarg
Thomas Klaeger
Birger Skogeng Pedersen
Birger Skogeng Pedersen
Johannes Schindelin
Todd Zullinger
Karsten Blees
Vasco Almeida
Pat Thoyts
yaras
Kyle J. McKay
Csaba Kiraly
Sebastian Schuberth
Michael Lutz
David Turner
Jens Lehmann