| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* jc/cvsserver-perm-bit-fix:
cvsserver: pick up the right mode bits
|
|
When determining the file mode from either ls-tree or diff-tree
output, we used to grab these octal mode string (typically 100644 or
100755) and then did
$git_perms .= "r" if ( $mode & 4 );
$git_perms .= "w" if ( $mode & 2 );
$git_perms .= "x" if ( $mode & 1 );
which was already wrong, as (100644 & 4) is very different from
oct("100644") & 4. An earlier refactoring 2c3af7e7 (cvsserver:
factor out git-log parsing logic, 2012-10-13) further changed it to
pick the third octal digit (10*0*644 or 10*0*755) from the left and
then do the above conversion, which does not make sense, either.
Let's use the third digit from the last of the octal mode string to
make sure we get the executable and read bits right.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tested-by: Michael Cronenworth <mike@cchtml.com>
|
|
Most of these were found using Lucas De Marchi's codespell tool.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the usage string consistent with Git.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
- Split off prepDirForOutput for "update" and "commit".
Some low level protocol details were changed to more closely
resemble CVS even in non-tagged cases. Hopefully it still works
with finicky clients like Eclipse.
- Substantial changes to "diff". The output is now closer to
standard CVS (including exit status), and can be used as
a patch, but there are still a number of differences compared
to CVS.
- Tweaks to "add", "remove", "status", and "commit".
- FUTURE: CVS revision numbers for branches simply encode git
commit IDs in a way that resembles CVS revision numbers,
dropping all normal CVS structural relations between different
revision numbers.
- FUTURE: "log" doesn't try to work properly at all with branches
and tags.
- FUTURE: "annotate" probably doesn't work with branches or
tags either (untested)?
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows getmeta() to recognize any commitish (sha1,
tag/branch name, etc).
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Nothing sets sticky yet, or uses the values set by this, but soon...
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These will be used soon, but not yet.
PERFORMANCE NOTE: getMetaFromCommithash() does not scale well as currently
implemented. See comment for possible optimization strategies.
Fortunately, it will only be used in cases that would not have worked
at all before this change.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
CVS tags are officially only allowed to use [-_0-9A-Za-f]. Git
refs commonly uses other characters, especially [./]. Such characters
need to be escaped from CVS in order to be referenced.
This just defines functions to escape/unescape names. The functions
are not used yet.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some field conversion was already duplicated, and more calls will
be added soon.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Standard "cvs add" never does any recursion. With standard
cvs, "cvs add dir" will either add just the "dir" to
the repository, or error out. Prior to this change, git-cvsserver
would try to recurse (perhaps re-adding sandbox-removed files?) into
the existing directory instead.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Keep track of the whole CVS revision number in-process. This will
clarify code when we start handling non-linear revision numbers later.
There is one externally visible change: conflict markers after
an update will now include the full CVS revision number,
including the "1." prefix. It used to leave off the prefix.
Other than the conflict marker, this change doesn't effect
external functionality. No new features, and the DB schema
is unchanged such that it continues to store just
the stripped rev numbers (without prefix).
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
- Comment that it should not be considered a complete list.
- #'annotate' comment - Uncommented annotate line is 2 lines earlier.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove:
- _headrev() - It uses similar functionality from getmeta() and gethead().
- gethistory() - It uses similar functions gethistorydense() and getlog().
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of a comment, we should really add test cases and actually fix it.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
No functionality changes, but these comments should make it easier to
understand how it works.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
sha1Or-k was a vestige from an early, never-released
attempt to handle some oddball cases of CRLF conversion (-k option).
Ultimately it wasn't needed, and I should have gotten rid of it
before submitting the CRLF patch in the first place.
See also 90948a42892779 (add ability to guess -kb from contents).
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A few scripted Porcelain implementations pretend as if the routine to show
their own help messages are triggered upon "git cmd --help", but a command
line parser of "git" will hijack such a request and shows the manpage for
the cmd subcommand.
Leaving the code to handle such input is simply misleading.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ab/require-perl-5.8:
perl: use "use warnings" instead of -w
perl: bump the required Perl version to 5.8 from 5.6.[21]
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Formalize our dependency on perl 5.8, bumped from 5.6.[12]. We already
used the three-arg form of open() which was introduced in 5.6.1, but
t/t9700/test.pl explicitly depended on 5.6.2.
However git-add--interactive.pl has been failing on the 5.6 line since
it was introduced in v1.5.0-rc0~12^2~2 back in 2006 due to this open
syntax:
sub run_cmd_pipe {
my $fh = undef;
open($fh, '-|', @_) or die;
return <$fh>;
}
Which when executed dies on "Can't use an undefined value as
filehandle reference". Several of our tests also fail on 5.6 (even
more when compiled with NO_PERL_MAKEMAKER=1):
t2016-checkout-patch.sh
t3904-stash-patch.sh
t3701-add-interactive.sh
t7105-reset-patch.sh
t7501-commit.sh
t9700-perl-git.sh
Our code is bitrotting on 5.6 with no-one interested in fixing it, and
pinning us to such an ancient release of Perl is keeping us from using
useful features introduced in the 5.8 release.
The 5.6 series is now over 10 years old, and the 5.6.2 maintenance
release almost 7. 5.8 on the other hand is more than 8 years old.
All the modern Unix-like operating systems have now upgraded to it or
a later version, and 5.8 packages are available for old IRIX, AIX
Solaris and Tru64 systems.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Tor Arntsen <tor@spacetec.no>
Acked-by: Randal L. Schwartz <merlyn@stonehenge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* eb/core-eol:
Add "core.eol" config variable
Rename the "crlf" attribute "text"
Add per-repository eol normalization
Add tests for per-repository eol normalization
Conflicts:
Documentation/config.txt
Makefile
|
|
Change the error message to report the erroneous password
character. $1 was never set in the previos version, it was a leftover
from older code that used a regex for the test.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
- Produce an error if the user tries to supply a password for anonymous
- Clarify the error message produced when there's no [gitcvs.authdb]
- Produce an E error if the authdb doesn't exist instead of spewing
$! to the user
- do crypt($user, descramble($pass)) eq $hash; crypt($user, $hash)
eq $hash would accept any password
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
- Indent the last commit to fit with the rest of the code.
- Use lexical filehandles instead of global globs
- Close the filehandle after the password database has been read.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a git repository is shared via HTTP, the config file is typically
visible. Use an external file instead.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow git-cvsserver to use authentication over pserver mode. The
pserver user/password database is stored in the config file for each
repository.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Worriedly-Acked-by: Martin Langhoff <martin.langhoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As discussed on the list, "crlf" is not an optimal name. Linus
suggested "text", which is much better.
Signed-off-by: Eyvind Bernhardsen <eyvind.bernhardsen@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* gp/maint-cvsserver:
git-cvsserver: allow regex metacharacters in CVSROOT
|
|
When run in a repository with a path name containing regex metacharacters
(e.g. +), git-cvsserver failed to split the client request into CVSROOT
and module. Now metacharacters are disabled for the value of CVSROOT in
the perl regex so that directory names containing metacharacters are
handled properly.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* pm/cvs-environ:
CVS Server: Support reading base and roots from environment
|
|
Native cvs update outputs the string "cvs update: Updating <DIR>" for
every directory it processes (to stderr) unless -q or -Q is given on
comman-line. This is used, e.g., by emacs pcl-cvs to split files by
directory. This commit implements this feature in cvsserver.
Signed-off-by: Sergei Organov <osv@javad.com>
Acked-by: Martin Langhoff <martin.langhoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Gitosis single-account Git/ssh hosting system runs git commands
through git-shell after confirming that the connecting user is
authorized to access the requested repository. This works well for
upload-pack and receive-pack, which take a repository argument through
git-shell. This doesn't work so well for `cvs server', which is passed
through literally, with no arguments. Allowing arguments risks
sneaking in `--export-all', so that restriction should be maintained.
Despite that, passing a repository root is necessary for per-user
access control by the hosting software, and passing a base path
improves usability without weakening security. Thus, git-cvsserver
needs to come up with these values at runtime by some other
means. Since git-shell preserves the environment for other purposes,
the environment can carry these arguments as well.
Thus, modify git-cvsserver to read $GIT_CVSSERVER_{BASE_PATH,ROOT} in
the absence of equivalent command line arguments.
Signed-off-by: Phil Miller <mille121@illinois.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-cvsserver still references git commands like 'git-config', which
is depcrecated. This commit changes git-cvsserver to use the
'git subcommand' form.
Sylvain Beucler reported the problem through
http://bugs.debian.org/536067
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
CVS server was running the hook before the update action was
actually done. This performs the update before the hook is called.
The original commit that introduced the current incorrect behavior
was 394d66d "git-cvsserver runs hooks/post-update". The error in
ordering of the hook call appears to have gone unnoticed, but since
git-cvsserver is supposed to emulate receive-pack, it stands to
reason that the hook should be run *after* the update. Since this
behavior is inconsistent with recieve-pack, users are either:
1) not using post-update hooks with git-cvsserver;
2) using post-update hooks that don't care whether they are
called before or after the actual update occurs;
3) using post-update hooks *only* with git-cvsserver, and
relying on the hook being called just before the update.
This patch would affect only users in case 3. These users are
depending on fairly obviously wrong behavior, and moreover they can
simply change their current post-update into post-recieve hooks,
and their systems will work correctly again.
Signed-off-by: Stefan Karpinski <stefan.karpinski@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The CVS protocol documentation, found at
http://www.wandisco.com/techpubs/cvs-protocol.pdf
states the following about the 'noop' command:
Response expected: yes. This request is a null command
in the sense that it doesn't do anything, but merely
(as with any other requests expecting a response) sends
back any responses pertaining to pending errors, pending
Notified responses, etc.
In accordance with this, the correct way to handle the 'noop'
command, when issued by a client, is to call req_EMPTY.
The 'noop' command is called by some CVS clients, notably
TortoiseCVS, thus making it desirable for git-cvsserver to
respond to the command rather than choking on it as unknown.
Signed-off-by: Stefan Karpinski <stefan.karpinski@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
CVS username is generated from local part email address.
We take the whole local part but restrict the character set to the
Portable Filename Character Set, which is used for Unix login names
according to Single Unix Specification v3.
This will obviously report different usernames from existing repositories
for commits with the local part of the author e-mail address that contains
characters outside the PFCS. Hopefully this won't break an old CVS
checkout from an earlier version of git-cvsserver, because the names are
always shown afresh to the CVS clients and not kept on the client side.
Signed-off-by: Fabian Emmes <fabian.emmes@rwth-aachen.de>
Signed-off-by: Lars Noschinski <lars@public.noschinski.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
cvsserver annotates each commit message by "via git-CVS emulator". This is
made configurable via gitcvs.commitmsgannotation.
Signed-off-by: Fabian Emmes <fabian.emmes@rwth-aachen.de>
Signed-off-by: Lars Noschinski <lars@public.noschinski.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Implement cvs checkout's -c option by returning a list of all "modules".
This is more useful than displaying a perl warning if -c is given.
Signed-off-by: Lars Noschinski <lars@public.noschinski.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
req_update still parses /refs/heads manually. Replace this by
a call to show-ref.
Signed-off-by: Lars Noschinski <lars@public.noschinski.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sb/dashless:
Make usage strings dash-less
t/: Use "test_must_fail git" instead of "! git"
t/test-lib.sh: exit with small negagive int is ok with test_must_fail
Conflicts:
builtin-blame.c
builtin-mailinfo.c
builtin-mailsplit.c
builtin-shortlog.c
git-am.sh
t/t4150-am.sh
t/t4200-rerere.sh
|
|
git-cvsserver.perl contained a single call to a nonexistant function
cleanupWorkDir(). This was obviously a typo for cleanupWorkTree().
Signed-off-by: Lars Noschinski <lars@public.noschinski.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When you misuse a git command, you are shown the usage string.
But this is currently shown in the dashed form. So if you just
copy what you see, it will not work, when the dashed form
is no longer supported.
This patch makes git commands show the dash-less version.
For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh
generates a dash-less usage string now.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If "gitcvs.allbinary" is set to "guess", then any file that has
not been explicitly marked as binary or text using the "crlf" attribute
and the "gitcvs.usecrlfattr" config will guess binary based on the contents
of the file.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If gitcvs.usecrlfattr is set to true, git-cvsserver will consult
the "crlf" for each file to determine if it should mark the file
as binary (-kb).
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Stefano Lattarini
David Aguilar
Matthew Ogilvie
Clemens Buchacher
Ævar Arnfjörð Bjarmason
Sam Vilain
Eyvind Bernhardsen
Gerrit Pape
Sergei Organov
Phil Miller
Stefan Karpinski
Fabian Emmes
Lars Noschinski
Lars Noschinski
Stephan Beyer