| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Remove the unused wrapper function.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* ab/repo-settings-cleanup:
repository.h: don't use a mix of int and bitfields
repo-settings.c: simplify the setup
read-cache & fetch-negotiator: check "enum" values in switch()
environment.c: remove test-specific "ignore_untracked..." variable
wrapper.c: add x{un,}setenv(), and use xsetenv() in environment.c
|
|
Adjust credential-cache helper to Windows.
* cb/unix-sockets-with-windows:
git-compat-util: include declaration for unix sockets in windows
credential-cache: check for windows specific errors
t0301: fixes for windows compatibility
|
|
Add fatal wrappers for setenv() and unsetenv(). In d7ac12b25d3 (Add
set_git_dir() function, 2007-08-01) we started checking its return
value, and since 48988c4d0c3 (set_git_dir: die when setenv() fails,
2018-03-30) we've had set_git_dir_1() die if we couldn't set it.
Let's provide a wrapper for both, this will be useful in many other
places, a subsequent patch will make another use of xsetenv().
The checking of the return value here is over-eager according to
setenv(3) and POSIX. It's documented as returning just -1 or 0, so
perhaps we should be checking -1 explicitly.
Let's just instead die on any non-zero, if our C library is so broken
as to return something else than -1 on error (and perhaps not set
errno?) the worst we'll do is die with a nonsensical errno value, but
we'll want to die in either case.
Let's make these return "void" instead of "int". As far as I can tell
there's no other x*() wrappers that needed to make the decision of
deviating from the signature in the C library, but since their return
value is only used to indicate errors (so we'd die here), we can catch
unreachable code such as
if (xsetenv(...) < 0)
[...];
I think it would be OK skip the NULL check of the "name" here for the
calls to die_errno(). Almost all of our setenv() callers are taking a
constant string hardcoded in the source as the first argument, and for
the rest we can probably assume they've done the NULL check
themselves. Even if they didn't, modern C libraries are forgiving
about it (e.g. glibc formatting it as "(null)"), on those that aren't,
well, we were about to die anyway. But let's include the check anyway
for good measure.
1. https://pubs.opengroup.org/onlinepubs/009604499/functions/setenv.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Available since Windows 10 release 1803 and Windows Server 2019.
NO_UNIX_SOCKETS is still the default for Windows builds, as they need
to keep backward compatibility with releases up to Windows 7, but allow
including the header otherwise.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the USE_PARENS_AROUND_GETTEXT_N compile-time option which was
meant to catch an inadvertent mistake which is too obscure to
maintain this facility.
The backstory of how USE_PARENS_AROUND_GETTEXT_N came about is: When I
added the N_() macro in 65784830366 (i18n: add no-op _() and N_()
wrappers, 2011-02-22) it was defined as:
#define N_(msgid) (msgid)
This is non-standard C, as was noticed and fixed in 642f85faab2 (i18n:
avoid parenthesized string as array initializer, 2011-04-07).
I.e. this needed to be defined as:
#define N_(msgid) msgid
Then in e62cd35a3e8 (i18n: log: mark parseopt strings for translation,
2012-08-20) when "builtin_log_usage" was marked for translation the
string concatenation for passing to usage() added in 1c370ea4e51
(Show usage string for 'git log -h', 'git show -h' and 'git diff -h',
2009-08-06) was faithfully preserved:
- "git log [<options>] [<since>..<until>] [[--] <path>...]\n"
- " or: git show [options] <object>...",
+ N_("git log [<options>] [<since>..<until>] [[--] <path>...]\n")
+ N_(" or: git show [options] <object>..."),
This was then fixed to be the expected array of usage strings in
e66dc0cc4b1 (log.c: fix translation markings, 2015-01-06) rather than
a string with multiple "\n"-delimited usage strings, and finally in
290c8e7a3fe (gettext.h: add parentheses around N_ expansion if
supported, 2015-01-11) USE_PARENS_AROUND_GETTEXT_N was added to ensure
this mistake didn't happen again.
I think that even if this was a N_()-specific issue this
USE_PARENS_AROUND_GETTEXT_N facility wouldn't be worth it, the issue
would be too rare to worry about.
But I also think that 290c8e7a3fe which introduced
USE_PARENS_AROUND_GETTEXT_N misattributed the problem. The issue
wasn't with the N_() macro added in e62cd35a3e8, but that before the
N_() macro existed in the codebase the initial migration to
parse_options() in 1c370ea4e51 continued passsing in a "\n"-delimited
string, when the new API it was migrating to supported and expected
the passing of an array.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Error message update.
* ew/mmap-failures:
xmmap: inform Linux users of tuning knobs on ENOMEM
|
|
Typofixes.
* ar/typofix:
*: fix typos which duplicate a word
|
|
Linux users may benefit from additional information on how to
avoid ENOMEM from mmap despite the system having enough RAM to
accomodate them. We can't reliably unmap pack windows to work
around the issue since malloc and other library routines may
mmap without our knowledge.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix typos in documentation, code comments, and RelNotes which repeat
various words. In trivial cases, just delete the duplicated word and
rewrap text, if needed. Reword the affected sentence in
Documentation/RelNotes/1.8.4.txt for it to make sense.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rewrite code that triggers undefined behaiour warning.
* jn/size-t-casted-to-off-t-fix:
xsize_t: avoid implementation defined behavior when len < 0
|
|
The xsize_t helper aims to safely convert an off_t to a size_t,
erroring out when a file offset is too large to fit into a memory
address. It does this by using two casts:
size_t size = (size_t) len;
if (len != (off_t) size)
... error out ...
On a platform with sizeof(size_t) < sizeof(off_t), this check is safe
and correct. The first cast truncates to a size_t by finding the
remainder modulo SIZE_MAX+1 (see C99 section 6.3.1.3 Signed and
unsigned integers) and the second promotes to an off_t, meaning the
result is true if and only if len is representable as a size_t.
On other platforms, this two-casts strategy still works well (always
succeeds) for len >= 0. But for len < 0, when the first cast succeeds
and produces SIZE_MAX + 1 + len, the resulting value is too large to
be represented as an off_t, so the second cast produces implementation
defined behavior. In practice, it is likely to produce a result of
true despite len not being representable as size_t.
Simplify by replacing with a more straightforward check: compare len
to the relevant bounds and then cast it. (To avoid a -Wsign-compare
warning, after checking that len >= 0, we explicitly convert to a
sufficiently-large unsigned type before comparing to SIZE_MAX.)
In practice, this is not likely to come up since typical callers use
nonnegative len. Still, it's helpful to handle this case to make the
behavior easy to reason about.
Historical note: the original bounds-checking in 46be82dfd0 (xsize_t:
check whether we lose bits, 2010-07-28) did not produce this
implementation-defined behavior, though it still did not handle
negative offsets. It was not until 73560c793a (git-compat-util.h:
xsize_t() - avoid -Wsign-compare warnings, 2017-09-21) introduced the
double cast that the implementation-defined behavior was triggered.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Streamline the codepath to fix the UTF-8 encoding issues in the
argv[] and the prefix on macOS.
* tb/precompose-prefix-simplify:
macOS: precompose startup_info->prefix
precompose_utf8: make precompose_string_if_needed() public
|
|
commit 5c327502 (MacOS: precompose_argv_prefix(), 2021-02-03) uses
the function precompose_string_if_needed() internally. It is only
used from precompose_argv_prefix() and therefore static in
compat/precompose_utf8.c
Expose this function, it will be used in the next commit.
While there, allow passing a NULL pointer, which will return NULL.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It does not make sense to make ".gitattributes", ".gitignore" and
".mailmap" symlinks, as they are supposed to be usable from the
object store (think: bare repositories where HEAD:.mailmap etc. are
used). When these files are symbolic links, we used to read the
contents of the files pointed by them by mistake, which has been
corrected.
* jk/open-dotgitx-with-nofollow:
mailmap: do not respect symlinks for in-tree .mailmap
exclude: do not respect symlinks for in-tree .gitignore
attr: do not respect symlinks for in-tree .gitattributes
exclude: add flags parameter to add_patterns()
attr: convert "macro_ok" into a flags field
add open_nofollow() helper
|
|
Make CALLOC_ARRAY usable like a function by requiring callers to supply
the trailing semicolon, which all of the current ones already do. With
the extra semicolon e.g. the following code wouldn't compile because it
disconnects the "else" from the "if":
if (condition)
CALLOC_ARRAY(ptr, n);
else
whatever();
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Work around platforms whose open() is reported to return EINTR (it
shouldn't, as we do our signals with SA_RESTART).
* jk/open-returns-eintr:
config.mak.uname: enable OPEN_RETURNS_EINTR for macOS Big Sur
Makefile: add OPEN_RETURNS_EINTR knob
|
|
On some platforms, open() reportedly returns EINTR when opening regular
files and we receive a signal (usually SIGALRM from our progress meter).
This shouldn't happen, as open() should be a restartable syscall, and we
specify SA_RESTART when setting up the alarm handler. So it may actually
be a kernel or libc bug for this to happen. But it has been reported on
at least one version of Linux (on a network filesystem):
https://lore.kernel.org/git/c8061cce-71e4-17bd-a56a-a5fed93804da@neanderfunk.de/
as well as on macOS starting with Big Sur even on a regular filesystem.
We can work around it by retrying open() calls that get EINTR, just as
we do for read(), etc. Since we don't ever _want_ to interrupt an open()
call, we can get away with just redefining open, rather than insisting
all callsites use xopen().
We actually do have an xopen() wrapper already (and it even does this
retry, though there's no indication of it being an observed problem back
then; it seems simply to have been lifted from xread(), etc). But it is
used hardly anywhere, and isn't suitable for general use because it will
die() on error. In theory we could combine the two, but it's awkward to
do so because of the variable-args interface of open().
This patch adds a Makefile knob for enabling the workaround. It's not
enabled by default for any platforms in config.mak.uname yet, as we
don't have enough data to decide how common this is (I have not been
able to reproduce on either Linux or Big Sur myself). It may be worth
enabling preemptively anyway, since the cost is pretty low (if we don't
see an EINTR, it's just an extra conditional).
However, note that we must not enable this on Windows. It doesn't do
anything there, and the macro overrides the existing mingw_open()
redirection. I've added a preemptive #undef here in the mingw header
(which is processed first) to just quietly disable it (we could also
make it an #error, but there is little point in being so aggressive).
Reported-by: Aleksey Kliger <alklig@microsoft.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some callers of open() would like to use O_NOFOLLOW, but it is not
available on all platforms. Let's abstract this into a helper function
so we can provide system-specific implementations.
Some light web-searching reveals that we might be able to get something
similar on Windows using FILE_FLAG_OPEN_REPARSE_POINT. I didn't dig into
this further.
For other systems without O_NOFOLLOW or any equivalent, we have two
options for fallback:
- we can just open anyway, following symlinks; this may have security
implications (e.g., following untrusted in-tree symlinks)
- we can determine whether the path is a symlink with lstat().
This is slower (two syscalls instead of one), but that may be
acceptable for infrequent uses like looking up .gitattributes files
(especially because we can get away with a single syscall for the
common case of ENOENT).
It's also racy, but should be sufficient for our needs (we are
worried about in-tree symlinks that we ourselves would have
previously created). We could make it non-racy at the cost of making
it even slower, by doing an fstat() on the opened descriptor and
comparing the dev/ino fields to the original lstat().
This patch implements the lstat() option in its slightly-faster racy
form.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When commands are started from a subdirectory, they may have to
compare the path to the subdirectory (called prefix and found out
from $(pwd)) with the tracked paths. On macOS, $(pwd) and
readdir() yield decomposed path, while the tracked paths are
usually normalized to the precomposed form, causing mismatch. This
has been fixed by taking the same approach used to normalize the
command line arguments.
* tb/precompose-prefix-too:
MacOS: precompose_argv_prefix()
|
|
* maint-2.29:
Git 2.29.3
Git 2.28.1
Git 2.27.1
Git 2.26.3
Git 2.25.5
Git 2.24.4
Git 2.23.4
Git 2.22.5
Git 2.21.4
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
* maint-2.28:
Git 2.28.1
Git 2.27.1
Git 2.26.3
Git 2.25.5
Git 2.24.4
Git 2.23.4
Git 2.22.5
Git 2.21.4
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
* maint-2.27:
Git 2.27.1
Git 2.26.3
Git 2.25.5
Git 2.24.4
Git 2.23.4
Git 2.22.5
Git 2.21.4
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
* maint-2.26:
Git 2.26.3
Git 2.25.5
Git 2.24.4
Git 2.23.4
Git 2.22.5
Git 2.21.4
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
* maint-2.24:
Git 2.24.4
Git 2.23.4
Git 2.22.5
Git 2.21.4
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
* maint-2.23:
Git 2.23.4
Git 2.22.5
Git 2.21.4
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
* maint-2.22:
Git 2.22.5
Git 2.21.4
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
* maint-2.21:
Git 2.21.4
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
* maint-2.20:
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
* maint-2.19:
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
* maint-2.18:
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
* maint-2.17:
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
|
|
Before checking out a file, we have to confirm that all of its leading
components are real existing directories. And to reduce the number of
lstat() calls in this process, we cache the last leading path known to
contain only directories. However, when a path collision occurs (e.g.
when checking out case-sensitive files in case-insensitive file
systems), a cached path might have its file type changed on disk,
leaving the cache on an invalid state. Normally, this doesn't bring
any bad consequences as we usually check out files in index order, and
therefore, by the time the cached path becomes outdated, we no longer
need it anyway (because all files in that directory would have already
been written).
But, there are some users of the checkout machinery that do not always
follow the index order. In particular: checkout-index writes the paths
in the same order that they appear on the CLI (or stdin); and the
delayed checkout feature -- used when a long-running filter process
replies with "status=delayed" -- postpones the checkout of some entries,
thus modifying the checkout order.
When we have to check out an out-of-order entry and the lstat() cache is
invalid (due to a previous path collision), checkout_entry() may end up
using the invalid data and thrusting that the leading components are
real directories when, in reality, they are not. In the best case
scenario, where the directory was replaced by a regular file, the user
will get an error: "fatal: unable to create file 'foo/bar': Not a
directory". But if the directory was replaced by a symlink, checkout
could actually end up following the symlink and writing the file at a
wrong place, even outside the repository. Since delayed checkout is
affected by this bug, it could be used by an attacker to write
arbitrary files during the clone of a maliciously crafted repository.
Some candidate solutions considered were to disable the lstat() cache
during unordered checkouts or sort the entries before passing them to
the checkout machinery. But both ideas include some performance penalty
and they don't future-proof the code against new unordered use cases.
Instead, we now manually reset the lstat cache whenever we successfully
remove a directory. Note: We are not even checking whether the directory
was the same as the lstat cache points to because we might face a
scenario where the paths refer to the same location but differ due to
case folding, precomposed UTF-8 issues, or the presence of `..`
components in the path. Two regression tests, with case-collisions and
utf8-collisions, are also added for both checkout-index and delayed
checkout.
Note: to make the previously mentioned clone attack unfeasible, it would
be sufficient to reset the lstat cache only after the remove_subtree()
call inside checkout_entry(). This is the place where we would remove a
directory whose path collides with the path of another entry that we are
currently trying to check out (possibly a symlink). However, in the
interest of a thorough fix that does not leave Git open to
similar-but-not-identical attack vectors, we decided to intercept
all `rmdir()` calls in one fell swoop.
This addresses CVE-2021-21300.
Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
|
|
The following sequence leads to a "BUG" assertion running under MacOS:
DIR=git-test-restore-p
Adiarnfd=$(printf 'A\314\210')
DIRNAME=xx${Adiarnfd}yy
mkdir $DIR &&
cd $DIR &&
git init &&
mkdir $DIRNAME &&
cd $DIRNAME &&
echo "Initial" >file &&
git add file &&
echo "One more line" >>file &&
echo y | git restore -p .
Initialized empty Git repository in /tmp/git-test-restore-p/.git/
BUG: pathspec.c:495: error initializing pathspec_item
Cannot close git diff-index --cached --numstat
[snip]
The command `git restore` is run from a directory inside a Git repo.
Git needs to split the $CWD into 2 parts:
The path to the repo and "the rest", if any.
"The rest" becomes a "prefix" later used inside the pathspec code.
As an example, "/path/to/repo/dir-inside-repå" would determine
"/path/to/repo" as the root of the repo, the place where the
configuration file .git/config is found.
The rest becomes the prefix ("dir-inside-repå"), from where the
pathspec machinery expands the ".", more about this later.
If there is a decomposed form, (making the decomposing visible like this),
"dir-inside-rep°a" doesn't match "dir-inside-repå".
Git commands need to:
(a) read the configuration variable "core.precomposeunicode"
(b) precocompose argv[]
(c) precompose the prefix, if there was any
The first commit,
76759c7dff53 "git on Mac OS and precomposed unicode"
addressed (a) and (b).
The call to precompose_argv() was added into parse-options.c,
because that seemed to be a good place when the patch was written.
Commands that don't use parse-options need to do (a) and (b) themselfs.
The commands `diff-files`, `diff-index`, `diff-tree` and `diff`
learned (a) and (b) in
commit 90a78b83e0b8 "diff: run arguments through precompose_argv"
Branch names (or refs in general) using decomposed code points
resulting in decomposed file names had been fixed in
commit 8e712ef6fc97 "Honor core.precomposeUnicode in more places"
The bug report from above shows 2 things:
- more commands need to handle precomposed unicode
- (c) should be implemented for all commands using pathspecs
Solution:
precompose_argv() now handles the prefix (if needed), and is renamed into
precompose_argv_prefix().
Inside this function the config variable core.precomposeunicode is read
into the global variable precomposed_unicode, as before.
This reading is skipped if precomposed_unicode had been read before.
The original patch for preocomposed unicode, 76759c7dff53, placed
precompose_argv() into parse-options.c
Now add it into git.c::run_builtin() as well. Existing precompose
calls in diff-files.c and others may become redundant, and if we
audit the callflows that reach these places to make sure that they
can never be reached without going through the new call added to
run_builtin(), we might be able to remove these existing ones.
But in this commit, we do not bother to do so and leave these
precompose callsites as they are. Because precompose() is
idempotent and can be called on an already precomposed string
safely, this is safer than removing existing calls without fully
vetting the callflows.
There is certainly room for cleanups - this change intends to be a bug fix.
Cleanups needs more tests in e.g. t/t3910-mac-os-precompose.sh, and should
be done in future commits.
[1] git-bugreport-2021-01-06-1209.txt (git can't deal with special characters)
[2] https://lore.kernel.org/git/A102844A-9501-4A86-854D-E3B387D378AA@icloud.com/
Reported-by: Daniel Troger <random_n0body@icloud.com>
Helped-By: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We allow variadic macros in the code base, but only if there is fallback
code for platforms that lack it. This leads to some annoyances:
- the code is more complicated because of the fallbacks (e.g.,
trace_printf(), etc, is implemented twice with a set of parallel
wrappers).
- some constructs are just impossible and we've had to live without
them (e.g., a cross between FLEX_ALLOC and xstrfmt)
Since this feature is present in C99, we may be able to start counting
on it being available everywhere. Let's start with a weather balloon
patch to find out.
This patch makes the absolute minimal change by always setting
HAVE_VARIADIC_MACROS. If somebody runs into a platform where it's a
problem, they can undo it by commenting out the define. Likewise, if we
have to revert this, it would be quite unlikely to cause conflicts.
Once we feel comfortable that this is the right direction, then we can
start ripping out all the spots that actually look at the flag, and
removing the dead code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a recent bug in a rarely used replacement code.
* jc/compat-util-setitimer-fix:
compat-util: pretend that stub setitimer() always succeeds
|
|
When 15b52a44 (compat-util: type-check parameters of no-op
replacement functions, 2020-08-06) turned a handful of no-op
C-preprocessor macros into static inline functions to give the
callers a better type checking for their parameters, it forgot
to return anything from the stubbed out setitimer() function,
even though the function was defined to return an int just like the
real thing.
Since the original C-preprocessor macro implementation was to just
turn the call to the function an empty statement, we know that the
existing callers do not check the return value from it, and it does
not matter what value we return. But it is safer to pretend that
the call succeeded by returning 0 than making it fail by returning -1
and clobbering errno with some value.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move a definition of compatibility wrapper from cache.h to
git-compat-util.h
* hn/sleep-millisec-decl:
move sleep_millisec to git-compat-util.h
|
|
The sleep function is defined in wrapper.c, so it makes more sense to be a in
system compatibility header.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* jk/report-fn-typedef:
usage: define a type for a reporting function
|
|
The usage, die, warning, and error routines all work with a function
pointer that takes the message to be reported. We usually just mention
the function's full type inline. But this makes the use of these
pointers hard to read, especially because C's syntax for returning a
function pointer is so awful:
void (*get_error_routine(void))(const char *err, va_list params);
Unless you read it very carefully, this looks like a function pointer
declaration. Let's instead use a single typedef to define a reporting
function, which is the same for all four types.
Note that this also removes the "extern" from these declarations to
match the surrounding functions. They were missed in 554544276a (*.[ch]:
remove extern from function declarations using spatch, 2019-04-29)
presumably because of the unusual syntax.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When there is no need to run a specific function on certain platforms,
we often #define an empty function to swallow its parameters and
make it into a no-op, e.g.
#define precompose_argv(c,v) /* no-op */
While this guarantees that no unneeded code is generated, it also
discards type and other checks on these parameters, e.g. a new code
written with the argv-array API (diff_args is of type "struct
argv_array" that has .argc and .argv members):
precompose_argv(diff_args.argc, diff_args.argv);
must be updated to use "struct strvec diff_args" with .nr and .v
members, like so:
precompose_argv(diff_args.nr, diff_args.v);
after the argv-array API has been updated to the strvec API.
However, the "no oop" C preprocessor macro is too aggressive to
discard what is unused, and did not catch such a call that was left
unconverted.
Using a "static inline" function whose body is a no-op should still
result in the same binary with decent compilers yet catch such a
reference to a missing field or passing a value of a wrong type.
While at it, I notice that precompute_str() has never been used
anywhere in the code, since it was introduced at 76759c7d (git on
Mac OS and precomposed unicode, 2012-07-08). Instead of turning it
into a static inline, just remove it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
SHA-256 migration work continues.
* bc/sha-256-part-2: (44 commits)
remote-testgit: adapt for object-format
bundle: detect hash algorithm when reading refs
t5300: pass --object-format to git index-pack
t5704: send object-format capability with SHA-256
t5703: use object-format serve option
t5702: offer an object-format capability in the test
t/helper: initialize the repository for test-sha1-array
remote-curl: avoid truncating refs with ls-remote
t1050: pass algorithm to index-pack when outside repo
builtin/index-pack: add option to specify hash algorithm
remote-curl: detect algorithm for dumb HTTP by size
builtin/ls-remote: initialize repository based on fetch
t5500: make hash independent
serve: advertise object-format capability for protocol v2
connect: parse v2 refs with correct hash algorithm
connect: pass full packet reader when parsing v2 refs
Documentation/technical: document object-format for protocol v2
t1302: expect repo format version 1 for SHA-256
builtin/show-index: provide options to determine hash algo
t5302: modernize test formatting
...
|
|
When parsing capabilities for the pack protocol, there are times we'll
want to compare the value of a capability to a NUL-terminated string.
Since the data we're reading will be space-terminated, not
NUL-terminated, we need a function that compares the two strings, but
also checks that they're the same length. Otherwise, if we used strncmp
to compare these strings, we might accidentally accept a parameter that
was a prefix of the expected value.
Add a function, xstrncmpz, that takes a NUL-terminated string and a
non-NUL-terminated string, plus a length, and compares them, ensuring
that they are the same length.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up by removing a compatibility implementation of a
function we no longer use.
* cb/no-more-gmtime:
compat: remove gmtime
|
|
ccd469450a (date.c: switch to reentrant {gm,local}time_r, 2019-11-28)
removes the only gmtime() call we had and moves to gmtime_r() which
doesn't have the same portability problems.
Remove the compat gmtime code since it is no longer needed, and confirm
by successfull running t4212 in FreeBSD 9.3 amd64 (the oldest I could
get a hold off).
Further work might be needed to ensure 32bit time_t systems (like FreeBSD
i386) will handle correctly the overflows tested in t4212, but that is
orthogonal to this change, and it doesn't change the current behaviour
as neither gmtime() or gmtime_r() will ever return NULL on those systems
because time_t is unsigned.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On Cygwin, the codepath for POSIX-like systems is taken in
run-command.c::start_command(). The prepare_cmd() helper
function is called to decide if the command needs to be looked
up in the PATH. The logic there is to do the PATH-lookup if
and only if it does not have any slash '/' in it. If this test
passes we end up attempting to run the command by appending the
string after each colon-separated component of PATH.
The Cygwin environment supports both Windows and POSIX style
paths, so both forwardslahes '/' and back slashes '\' can be
used as directory separators for any external program the user
supplies.
Examples for path strings which are being incorrectly searched
for in the PATH instead of being executed as is:
- "C:\Program Files\some-program.exe"
- "a\b\c.exe"
To handle these, the PATH lookup detection logic in prepare_cmd()
is taught to know about this Cygwin quirk, by introducing
has_dir_sep(path) helper function to abstract away the difference
between true POSIX and Cygwin systems.
Signed-off-by: Andras Kucsma <r0maikx02b@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
* maint-2.23: (44 commits)
Git 2.23.1
Git 2.22.2
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
...
|
Carlo Marcelo Arenas Belón
Junio C Hamano
Ævar Arnfjörð Bjarmason
Eric Wong
Andrei Rybak
Jonathan Nieder
Torsten Bögershausen
René Scharfe
Jeff King
Johannes Schindelin
Matheus Tavares
Han-Wen Nienhuys
brian m. carlson
Andras Kucsma