| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The bisect log output of skipped commits introduced in f989cac "bisect:
Log possibly bad, skipped commits at bisection end" should obtain the range of
skipped commits from
git rev-list bad --not good-1 good-2
not
git rev-list bad --not good-1 --not good-2
when the skipped range contains a merge with good points in each parent.
Signed-off-by: Torstein Hegge <hegge@resisty.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the bisection completes with only skipped commits left to as possible
first bad commit, output the list of possible first bad commits to human
readers of the bisection log.
Signed-off-by: Torstein Hegge <hegge@resisty.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When bisect successfully finds a single revision, the first bad commit
should be shown to human readers of 'git bisect log'.
This resolves the apparent disconnect between the bisection result and
the log when a bug reporter says "I know that the first bad commit is
$rev, as you can see from $(git bisect log)".
Signed-off-by: Torstein Hegge <hegge@resisty.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/bisect-no-checkout:
bisect: fix exiting when checkout failed in bisect_start()
|
|
Commit 4796e823 ("bisect: introduce --no-checkout support into porcelain." Aug 4 2011)
made checking out the branch where we started depends on the "checkout" mode. But
unfortunately it lost the "|| exit" part after the checkout command.
As it makes no sense to continue if the checkout failed and as people have already
complained that the error message given when we just exit in this case is not clear, see:
http://thread.gmane.org/gmane.comp.version-control.git/180733/
this patch adds a "|| die <hopefully clear message>" part after the checkout command.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This enhances the support for bisecting history in bare repositories.
The "git bisect" command no longer needs to be run inside a repository
with a working tree; it defaults to --no-checkout when run in a bare
repository.
Two tests are included to demonstrate this behaviour.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a few remaining lines that indented with spaces.
Also simplify the logic of checking out the original branch and reporting
error during "bisect reset".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All leading whitespace is now encoded with tabs.
After this patch, the following is true:
RAW=$(cat git-bisect.sh | md5sum) &&
ROUNDTRIP=$(cat git-bisect.sh | expand -i - | unexpand --first-only - | md5sum) &&
LEADING=$(sed -n "/^ */p" < git-bisect.sh | wc -l) &&
test $RAW = $ROUNDTRIP &&
test $LEADING = 0 &&
test -z "$(git diff -w HEAD~1 HEAD)"
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-bisect can now perform bisection of a history without performing
a checkout at each stage of the bisection process. Instead, HEAD is updated.
One use-case for this function is allow git bisect to be used with
damaged repositories where git checkout would fail because the tree
referenced by the commit is damaged.
It can also be used in other cases where actual checkout of the tree
is not required to progress the bisection.
Improved-by: Christian Couder <chriscool@tuxfamily.org>
Improved-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Christian Couder pointed out that the existing eval strategy
swallows an initial non-zero return. Using && to connect
the statements should fix this.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently 'git bisect start' modifies some state prior to checking
that its arguments are valid.
This change moves argument validation before state modification
with the effect that state modification does not occur
unless argument validations succeeds.
An existing test is changed to check that new bisect state
is not created if arguments are invalid.
A new test is added to check that existing bisect state
is not modified if arguments are invalid.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Gettextize the "You need to start by" message in
bisect_next_check. This message assembled English output by hand so it
needed to be split up to make it translatable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Gettextize the [Y/n] questions git-bisect presents, and leave a note
in a TRANSLATORS comment explaining that translators have to preserve
a mention of the Y/n characters since the program will expect them,
and not their localized equivalents.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Gettextize bisect_replay messages that use the $1 variable. Since it's
subroutine local we have to provide an alias for it for eval_gettext.
Since I was doing that anyway I've changed all other uses of $1
variable to use the alias variable for clarity.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
ettextize bisect_reset messages that use the $1 variable. Since it's
subroutine local we have to provide an alias for it for eval_gettext.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Gettextize bisect_run messages that use the $@ variable. Since it's
subroutine local we have to provide an alias for it for eval_gettext.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If gitk is not available in the PATH, bisect ends up
exiting with the shell's 127 error code, confusing the git
wrapper into thinking that bisect is not a git command.
We already fallback to git-log if there doesn't seem to be a
graphical display available. We should do the same if gitk
is not available in our PATH at all. This not only fixes the
ugly error message, but is a much more sensible default than
failing to show the user anything.
Reported by Maxin John.
Tested-by: Maxin B. John <maxin@maxinbjohn.info>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git bisect replay' has a mandatory logfile argument, but the current
implementation doesn't check whether the user has specified one. When
the user omits the logfile argument, this leads to the following
unhelpful error message:
cannot read for replaying
So, check for the mandatory argument first, and provide a more
meaningful error message when it is omitted.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git bisect reset' (without the optional <commit> argument) returns to
the original HEAD from where the bisection was started. However,
when, for whatever reason, the user deleted the original HEAD before
invoking 'git bisect reset', then all he gets is an error message from
'git checkout':
fatal: invalid reference: somebranch
Let's try to be more helpful with an error message better describing
what went wrong and a suggestion about how to resolve the situation:
Could not check out original HEAD 'somebranch'. Try 'git bisect reset <commit>'.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git bisect log' is implemented by a direct invocation of 'cat
"$GIT_DIR/BISECT_LOG"', without any sanity checks. Consequently,
running 'git bisect log' while not bisecting leads to an error,
because the bisect logfile doesn't exists. The accompanying error
message
cat: /path/to/repo/.git/BISECT_LOG: No such file or directory
is neither very helpful nor very friendly.
Instead of blindly trying to cat the log file, first check whether
there is a bisection going on (i.e. the bisect logfile exists), and
die with a more appropriate error message when not.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rs/work-around-grep-opt-insanity:
Protect scripted Porcelains from GREP_OPTIONS insanity
mergetool--lib: simplify guess_merge_tool()
Conflicts:
git-instaweb.sh
|
|
If the user has exported the GREP_OPTIONS environment variable, the output
from "grep" and "egrep" in scripted Porcelains may be different from what
they expect. For example, we may want to count number of matching lines,
by "grep" piped to "wc -l", and GREP_OPTIONS=-C3 will break such use.
The approach taken by this change to address this issue is to protect only
our own use of grep/egrep. Because we do not unset it at the beginning of
our scripts, hook scripts run from the scripted Porcelains are exposed to
the same insanity this environment variable causes when grep/egrep is used
to implement logic (e.g. "grep | wc -l"), and it is entirely up to the
hook scripts to protect themselves.
On the other hand, applypatch-msg hook may want to show offending words in
the proposed commit log message using grep to the end user, and the user
might want to set GREP_OPTIONS=--color to paint the match more visibly.
The approach to protect only our own use without unsetting the environment
variable globally will allow this use case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In commit ad3f9a7 (Add '--bisect' revision machinery argument) the
'--bisect' option was added to easily pass bisection refs to
commands using the revision machinery.
So it is now shorter and safer to use the new '--bisect' revision
machinery option, than to compute the refs that we must pass.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
‘git bisect reset’ accepts an optional argument specifying a branch to
check out after cleaning up the bisection state. This lets you
specify an arbitrary commit.
In particular, this provides a way to clean the bisection state
without moving HEAD: ‘git bisect reset HEAD’. This may be useful if
you are not interested in the state before you began a bisect,
especially if checking out the old commit would be expensive and
invalidate most of your compiled tree.
Clarify the ‘git bisect reset’ documentation to explain this optional
argument, which was previously mentioned only in the usage message.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch replace the "--next-exit" option of "git bisect--helper"
with a "--next-all" option that does merge base checking using
the "check_good_are_ancestors_of_bad" function implemented in
"bisect.c" in a former patch.
The new "--next-all" option is then used in "git-bisect.sh" instead
of the "--next-exit" option, and all the shell functions in
"git-bisect.sh" that are now unused are removed.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As the "sq" function was the only place using Perl in "git-bisect.sh",
this removes the Perl dependency in this script.
While at it, we also remove the sed instruction in the Makefile that
substituted @@PERL@@ with the Perl path in shell scripts, as this is
not needed anymore. (It is now only needed in "git-instaweb.sh" but
this command is dealt with separately in the Makefile.)
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
instead of "git bisect--helper --next-vars".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cc/bisect-filter: (21 commits)
rev-list: add "int bisect_show_flags" in "struct rev_list_info"
rev-list: remove last static vars used in "show_commit"
list-objects: add "void *data" parameter to show functions
bisect--helper: string output variables together with "&&"
rev-list: pass "int flags" as last argument of "show_bisect_vars"
t6030: test bisecting with paths
bisect: use "bisect--helper" and remove "filter_skipped" function
bisect: implement "read_bisect_paths" to read paths in "$GIT_DIR/BISECT_NAMES"
bisect--helper: implement "git bisect--helper"
bisect: use the new generic "sha1_pos" function to lookup sha1
rev-list: call new "filter_skip" function
patch-ids: use the new generic "sha1_pos" function to lookup sha1
sha1-lookup: add new "sha1_pos" function to efficiently lookup sha1
rev-list: pass "revs" to "show_bisect_vars"
rev-list: make "show_bisect_vars" non static
rev-list: move code to show bisect vars into its own function
rev-list: move bisect related code into its own file
rev-list: make "bisect_list" variable local to "cmd_rev_list"
refs: add "for_each_ref_in" function to refactor "for_each_*_ref" functions
quote: add "sq_dequote_to_argv" to put unwrapped args in an argv array
...
|
|
When doing:
eval "git bisect--helper --next-vars" | {
while read line
do
echo "$line &&"
done
echo ':'
}
the result code comes from the last "echo ':'", not from running
"git bisect--helper --next-vars".
This patch gets rid of the need to string together the line from
the output of "git bisect--helper" with "&&" in the calling script
by making "git bisect--helper --next-vars" return output variables
already in that format.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the new "git bisect--helper" builtin. It should be faster and
safer instead of the old "filter_skipped" shell function. And it
is a first step to move more shell code to C.
As the output is a little bit different we have to change the code
that interpret the results. But these changes improve code clarity.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In "git-bisect.sh" the "git checkout" command is only used to
change the current branch, but it is used like this:
git checkout "$branch"
which will output the following misleading error message when
it fails:
error: pathspec 'foo' did not match any file(s) known to git.
This patch change the way we use "git checkout" like this:
git checkout "$branch" --
so that we will get the following error message:
fatal: invalid reference: foo
which is better.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch teaches "git rev-list --bisect-vars" to output an estimate
of the number of bisection step left _after the current one_ along with
the other variables it already outputs.
This patch also makes "git-bisect.sh" display this number of steps left
_after the current one_, along with the estimate of the number of
revisions left to test (after the current one).
Here is a table to help analyse what should be the best estimate for
the number of bisect steps left.
N : linear case --> probabilities --> best
-------------------------------------------------------------
1 : G-B --> 0 --> 0
2 : G-U1-B --> 0 --> 0
3 : G-U1-U2-B --> 0(1/3) 1(2/3) --> 1
4 : G-U1-U2-U3-B --> 1 --> 1
5 : G-U1-U2-U3-U4-B --> 1(3/5) 2(2/5) --> 1
6 : G-U1-U2-U3-U4-U5-B --> 1(2/6) 2(4/6) --> 2
7 : G-U1-U2-U3-U4-U5-U6-B --> 1(1/7) 2(6/7) --> 2
8 : G-U1-U2-U3-U4-U5-U6-U7-B --> 2 --> 2
9 : G-U1-U2-U3-U4-U5-U6-U7-U8-B --> 2(7/9) 3(2/9) --> 2
10: G-U1-U2-U3-U4-U5-U6-U7-U8-U9-B --> 2(6/10)3(4/10)--> 2
In the column "N", there is the number of revisions that could _now_
be the first bad commit we are looking for.
The "linear case" column describes the linear history corresponding to
the number in column N. G means good, B means bad, and Ux means
unknown. Note that the first bad revision we are looking for can be
any Ux or B.
In the "probabilities" column, there are the different outcomes in
number of steps with the odds of each outcome in parenthesis
corresponding to the linear case.
The "best" column gives the most accurate estimate among the different
outcomes in the "probabilities" column.
We have the following:
best(2^n) == n - 1
and for any x between 0 included and 2^n excluded, the probability for
n - 1 steps left looks like:
P(2^n + x) == (2^n - x) / (2^n + x)
and P(2^n + x) < 0.5 means 2^n < 3x
So the algorithm used in this patch calculates 2^n and x, and then
choose between returning n - 1 and n.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cc/maint-1.6.0-bisect-fix:
bisect: fix another instance of eval'ed string
Conflicts:
git-bisect.sh
|
|
When there is nothing to be skipped, the output from
rev-list --bisect-vars was eval'ed without first being
strung together with &&; this is probably not a problem
as it is much less likely to be a bad input than the list
handcrafted by the filter_skip function, but it still is
a good discipline.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cc/maint-1.6.0-bisect-fix:
bisect: fix quoting TRIED revs when "bad" commit is also "skip"ped
Conflicts:
git-bisect.sh
|
|
When the "bad" commit was also "skip"ped and when more than one
commit was skipped, the "filter_skipped" function would have
printed something like:
bisect_rev=<hash1>|<hash2>
(where <hash1> and <hash2> are hexadecimal sha1 hashes)
and this would have been evaled later as piping "bisect_rev=<hash1>"
into "<hash2>", which would have failed.
So this patch makes the "filter_skipped" function properly quote
what it outputs, so that it will print something like:
bisect_rev='<hash1>|<hash2>'
which will be properly evaled later. The caller was not stopping
properly because the scriptlet this function returned to be evaled
was not strung together with && and because of this, an error in
an earlier part of the output was simply ignored.
A test case is added to the test suite.
And while at it, we also initialize the VARS, FOUND and TRIED
variables, so that we protect ourselves from environment variables
the user may have with these names.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It seems that Cygwin sets the variable SESSIONNAME when an interactive
desktop session is running, and does not set it when you log in via ssh.
So we can use this variable to determine whether to run gitk or git log
in git bisect view.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
|
|
The patch that allows "git bisect skip" to be passed a range of
commits using the "<commit1>..<commit2>" notation is flawed because
it introduces a regression when it was passed a simple rev or commit.
"git bisect skip <commit>" doesn't work any more, because <commit>
is quoted but not properly unquoted.
This patch fixes that and add tests cases to better check when it is
passed commits and range of commits.
While at it, this patch also properly quotes the non range arguments
using the "sq" function.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
|
|
The current "git bisect skip" syntax is "git bisect skip [<rev>...]"
so it's already possible to skip a range of revisions using
something like:
$ git bisect skip $(git rev-list A..B)
where A and B are the bounds of the range we want to skip.
This patch teaches "git bisect skip" to accept:
$ git bisect skip A..B
as an abbreviation for the former command.
This is done by checking each argument to see if it contains two
dots one after the other ('..'), and by expending it using
"git rev-list" if that is the case.
Note that this patch will not make "git bisect skip" accept all
that "git rev-list" accepts, as things like "^A B" for exemple
will not work. But things like "A B..C D E F.. ..G H...I" should
work as expected.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Masanari Iida
Torstein Hegge
Junio C Hamano
Christian Couder
Jon Seymour
Ævar Arnfjörð Bjarmason
Jeff King
SZEDER Gábor
Anders Kaseorg
Nanako Shiraishi
Johannes Schindelin