| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code to fsck objects received across multiple packs during a
single git fetch session has been broken when the packfile URI
feature was in use. A workaround has been added by disabling the
codepath to avoid keeping a packfile that is too small.
* jt/transfer-fsck-across-packs-fix:
fetch-pack: do not mix --pack_header and packfile uri
|
|
When fetching (as opposed to cloning) from a repository with packfile
URIs enabled, an error like this may occur:
fatal: pack has bad object at offset 12: unknown object type 5
fatal: finish_http_pack_request gave result -1
fatal: fetch-pack: expected keep then TAB at start of http-fetch output
This bug was introduced in b664e9ffa1 ("fetch-pack: with packfile URIs,
use index-pack arg", 2021-02-22), when the index-pack args used when
processing the inline packfile of a fetch response and when processing
packfile URIs were unified.
This bug happens because fetch, by default, partially reads (and
consumes) the header of the inline packfile to determine if it should
store the downloaded objects as a packfile or loose objects, and thus
passes --pack_header=<...> to index-pack to inform it that some bytes
are missing. However, when it subsequently fetches the additional
packfiles linked by URIs, it reuses the same index-pack arguments, thus
wrongly passing --index-pack-arg=--pack_header=<...> when no bytes are
missing.
This does not happen when cloning because "git clone" always passes
do_keep, which instructs the fetch mechanism to always retain the
packfile, eliminating the need to read the header.
There are a few ways to fix this, including filtering out pack_header
arguments when downloading the additional packfiles, but I decided to
stick to always using index-pack throughout when packfile URIs are
present - thus, Git no longer needs to read the bytes, and no longer
needs --pack_header here.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The approach to "fsck" the incoming objects in "index-pack" is
attractive for performance reasons (we have them already in core,
inflated and ready to be inspected), but fundamentally cannot be
applied fully when we receive more than one pack stream, as a tree
object in one pack may refer to a blob object in another pack as
".gitmodules", when we want to inspect blobs that are used as
".gitmodules" file, for example. Teach "index-pack" to emit
objects that must be inspected later and check them in the calling
"fetch-pack" process.
* jt/transfer-fsck-across-packs:
fetch-pack: print and use dangling .gitmodules
fetch-pack: with packfile URIs, use index-pack arg
http-fetch: allow custom index-pack args
http: allow custom index-pack args
|
|
Teach index-pack to print dangling .gitmodules links after its "keep" or
"pack" line instead of declaring an error, and teach fetch-pack to check
such lines printed.
This allows the tree side of the .gitmodules link to be in one packfile
and the blob side to be in another without failing the fsck check,
because it is now fetch-pack which checks such objects after all
packfiles have been downloaded and indexed (and not index-pack on an
individual packfile, as it is before this commit).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unify the index-pack arguments used when processing the inline pack and
when downloading packfiles referenced by URIs. This is done by teaching
get_pack() to also store the index-pack arguments whenever at least one
packfile URI is given, and then when processing the packfile URI(s),
using the stored arguments.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is the next step in teaching fetch-pack to pass its index-pack
arguments when processing packfiles referenced by URIs.
The "--keep" in fetch-pack.c will be replaced with a full message in a
subsequent commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Let's replace the 2 different pieces of code that write a
promisor file in 'builtin/repack.c' and 'fetch-pack.c'
with a new function called 'write_promisor_file()' in
'pack-write.c' and 'pack.h'.
This might also help us in the future, if we want to put
back the ref names and associated hashes that were in
the promisor files we are repacking in 'builtin/repack.c'
as suggested by a NEEDSWORK comment just above the code
we are refactoring.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As we are going to refactor the code that actually writes
the promisor file into a separate function in a following
commit, let's rename the current write_promisor_file()
function to create_promisor_file().
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"fetch-pack" could pass NULL pointer to unlink(2) when it sees an
invalid filename; the error checking has been tightened to make
this impossible.
* rs/fetch-pack-invalid-lockfile:
fetch-pack: disregard invalid pack lockfiles
|
|
9da69a6539 (fetch-pack: support more than one pack lockfile, 2020-06-10)
started to use a string_list for pack lockfile names instead of a single
string pointer. It removed a NULL check from transport_unlock_pack() as
well, which is the function that eventually deletes these lockfiles and
releases their name strings.
index_pack_lockfile() can return NULL if it doesn't like the contents it
reads from the file descriptor passed to it. unlink(2) is declared to
not accept NULL pointers (at least with glibc). Undefined Behavior
Sanitizer together with Address Sanitizer detects a case where a NULL
lockfile name is passed to unlink(2) by transport_unlock_pack() in t1060
(make SANITIZE=address,undefined; cd t; ./t1060-object-corruption.sh).
Reinstate the NULL check to avoid undefined behavior, but put it right
at the source, so that the number of items in the string_list reflects
the number of valid lockfiles.
Signed-off-by: René Scharfe <l.s.r@web.de>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the server sent a session-id capability and transfer.advertiseSID
is true, advertise fetch-pack's own session ID back to the server.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Updates to on-demand fetching code in lazily cloned repositories.
* jt/lazy-fetch:
fetch: no FETCH_HEAD display if --no-write-fetch-head
fetch-pack: remove no_dependents code
promisor-remote: lazy-fetch objects in subprocess
fetch-pack: do not lazy-fetch during ref iteration
fetch: only populate existing_refs if needed
fetch: avoid reading submodule config until needed
fetch: allow refspecs specified through stdin
negotiator/noop: add noop fetch negotiator
|
|
Bugfix for "git fetch" when the packfile URI capability is in use.
* jt/fetch-pack-loosen-validation-with-packfile-uri:
fetch-pack: make packfile URIs work with transfer.fsckobjects
fetch-pack: document only_packfile in get_pack()
(various): document from_promisor parameter
|
|
When fetching with packfile URIs and transfer.fsckobjects=1, use the
--fsck-objects instead of the --strict flag when invoking index-pack so
that links are not checked, only objects. This is because incomplete
links are expected. (A subsequent connectivity check will be done when
all the packs have been downloaded regardless of whether
transfer.fsckobjects is set.)
This is similar to 98a2ea46c2 ("fetch-pack: do not check links for
partial fetch", 2018-03-15), but for packfile URIs instead of partial
clones.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
dd4b732df7 ("upload-pack: send part of packfile response as uri",
2020-06-10) added the "only_packfile" parameter to get_pack() but did
not document it. Add documentation.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When fetching a pack from a promisor remote, the corresponding .promisor
file needs to be created. "fetch-pack" originally did this by passing
"--promisor" to "index-pack", but in 5374a290aa ("fetch-pack: write
fetched refs to .promisor", 2019-10-16), "fetch-pack" was taught to do
this itself instead, because it needed to store ref information in the
.promisor file.
This causes a problem with superprojects when transfer.fsckobjects is
set, because in the current implementation, it is "index-pack" that
calls fsck_finish() to check the objects; before 5374a290aa,
fsck_finish() would see that .gitmodules is a promisor object and
tolerate it being missing, but after, there is no .promisor file (at the
time of the invocation of fsck_finish() by "index-pack") to tell it that
.gitmodules is a promisor object, so it returns an error.
Therefore, teach "fetch-pack" to pass "--promisor" to index pack once
again. "fetch-pack" will subsequently overwrite this file with the ref
information.
An alternative is to instead move object checking to "fetch-pack", and
let "index-pack" only index the files. However, since "index-pack" has
to inflate objects in order to index them, it seems reasonable to also
let it check the objects (which also require inflated files).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that Git has switched to using a subprocess to lazy-fetch missing
objects, remove the no_dependents code as it is no longer used.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to determine negotiation tips, "fetch-pack" iterates over all
refs and dereferences all annotated tags found. This causes the
existence of targets of refs and annotated tags to be checked. Avoiding
this is especially important when we use "git fetch" (which invokes
"fetch-pack") to perform lazy fetches in a partial clone because a
target of such a ref or annotated tag may need to be itself lazy-fetched
(and otherwise causing an infinite loop).
Therefore, teach "fetch-pack" not to lazy fetch whenever iterating over
refs. This is done by using the raw form of ref iteration and by
dereferencing tags ourselves.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code which split an argv_array call across multiple lines, like:
argv_array_pushl(&args, "one argument",
"another argument", "and more",
NULL);
was recently mechanically renamed to use strvec, which results in
mis-matched indentation like:
strvec_pushl(&args, "one argument",
"another argument", "and more",
NULL);
Let's fix these up to align the arguments with the opening paren. I did
this manually by sifting through the results of:
git jump grep 'strvec_.*,$'
and liberally applying my editor's auto-format. Most of the changes are
of the form shown above, though I also normalized a few that had
originally used a single-tab indentation (rather than our usual style of
aligning with the open paren). I also rewrapped a couple of obvious
cases (e.g., where previously too-long lines became short enough to fit
on one), but I wasn't aggressive about it. In cases broken to three or
more lines, the grouping of arguments is sometimes meaningful, and it
wasn't worth my time or reviewer time to ponder each case individually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts remaining files from the first half of the alphabet,
to keep the diff to a manageable size.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
and then selectively staging files with "git add '[abcdefghjkl]*'".
We'll deal with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
SHA-256 migration work continues.
* bc/sha-256-part-2: (44 commits)
remote-testgit: adapt for object-format
bundle: detect hash algorithm when reading refs
t5300: pass --object-format to git index-pack
t5704: send object-format capability with SHA-256
t5703: use object-format serve option
t5702: offer an object-format capability in the test
t/helper: initialize the repository for test-sha1-array
remote-curl: avoid truncating refs with ls-remote
t1050: pass algorithm to index-pack when outside repo
builtin/index-pack: add option to specify hash algorithm
remote-curl: detect algorithm for dumb HTTP by size
builtin/ls-remote: initialize repository based on fetch
t5500: make hash independent
serve: advertise object-format capability for protocol v2
connect: parse v2 refs with correct hash algorithm
connect: pass full packet reader when parsing v2 refs
Documentation/technical: document object-format for protocol v2
t1302: expect repo format version 1 for SHA-256
builtin/show-index: provide options to determine hash algo
t5302: modernize test formatting
...
|
|
The "fetch/clone" protocol has been updated to allow the server to
instruct the clients to grab pre-packaged packfile(s) in addition
to the packed object data coming over the wire.
* jt/cdn-offload:
upload-pack: fix a sparse '0 as NULL pointer' warning
upload-pack: send part of packfile response as uri
fetch-pack: support more than one pack lockfile
upload-pack: refactor reading of pack-objects out
Documentation: add Packfile URIs design doc
Documentation: order protocol v2 sections
http-fetch: support fetching packfiles by URL
http-fetch: refactor into function
http: refactor finish_http_pack_request()
http: use --stdin when indexing dumb HTTP pack
|
|
Teach upload-pack to send part of its packfile response as URIs.
An administrator may configure a repository with one or more
"uploadpack.blobpackfileuri" lines, each line containing an OID, a pack
hash, and a URI. A client may configure fetch.uriprotocols to be a
comma-separated list of protocols that it is willing to use to fetch
additional packfiles - this list will be sent to the server. Whenever an
object with one of those OIDs would appear in the packfile transmitted
by upload-pack, the server may exclude that object, and instead send the
URI. The client will then download the packs referred to by those URIs
before performing the connectivity check.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Whenever a fetch results in a packfile being downloaded, a .keep file is
generated, so that the packfile can be preserved (from, say, a running
"git repack") until refs are written referring to the contents of the
packfile.
In a subsequent patch, a successful fetch using protocol v2 may result
in more than one .keep file being generated. Therefore, teach
fetch_pack() and the transport mechanism to support multiple .keep
files.
Implementation notes:
- builtin/fetch-pack.c normally does not generate .keep files, and thus
is unaffected by this or future changes. However, it has an
undocumented "--lock-pack" feature, used by remote-curl.c when
implementing the "fetch" remote helper command. In keeping with the
remote helper protocol, only one "lock" line will ever be written;
the rest will result in warnings to stderr. However, in practice,
warnings will never be written because the remote-curl.c "fetch" is
only used for protocol v0/v1 (which will not generate multiple .keep
files). (Protocol v2 uses the "stateless-connect" command, not the
"fetch" command.)
- connected.c has an optimization in that connectivity checks on a ref
need not be done if the target object is in a pack known to be
self-contained and connected. If there are multiple packfiles, this
optimization can no longer be done.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Parse the server's object-format capability and respond accordingly,
dying if there is a mismatch.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Detect when the server doesn't support our hash algorithm and abort.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, remote-curl acts as a proxy and blindly forwards packets
between an HTTP server and fetch-pack. In the case of a stateless RPC
connection where the connection is terminated before the transaction is
complete, remote-curl will blindly forward the packets before waiting on
more input from fetch-pack. Meanwhile, fetch-pack will read the
transaction and continue reading, expecting more input to continue the
transaction. This results in a deadlock between the two processes.
This can be seen in the following command which does not terminate:
$ git -c protocol.version=2 clone https://github.com/git/git.git --shallow-since=20151012
Cloning into 'git'...
whereas the v1 version does terminate as expected:
$ git -c protocol.version=1 clone https://github.com/git/git.git --shallow-since=20151012
Cloning into 'git'...
fatal: the remote end hung up unexpectedly
Instead of blindly forwarding packets, make remote-curl insert a
response end packet after proxying the responses from the remote server
when using stateless_connect(). On the RPC client side, ensure that each
response ends as described.
A separate control packet is chosen because we need to be able to
differentiate between what the remote server sends and remote-curl's
control packets. By ensuring in the remote-curl code that a server
cannot send response end packets, we prevent a malicious server from
being able to perform a denial of service attack in which they spoof a
response end packet and cause the described deadlock to happen.
Reported-by: Force Charlie <charlieio@outlook.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* tb/shallow-cleanup:
shallow: use struct 'shallow_lock' for additional safety
shallow.h: document '{commit,rollback}_shallow_file'
shallow: extract a header file for shallow-related functions
commit: make 'commit_graft_pos' non-static
|
|
The upload-pack protocol v2 gave up too early before finding a
common ancestor, resulting in a wasteful fetch from a fork of a
project. This has been corrected to match the behaviour of v0
protocol.
* jt/v2-fetch-nego-fix:
fetch-pack: in protocol v2, reset in_vain upon ACK
fetch-pack: in protocol v2, in_vain only after ACK
fetch-pack: return enum from process_acks()
|
|
Fix in-core inconsistency after fetching into a shallow repository
that broke the code to write out commit-graph.
* tb/reset-shallow:
shallow.c: use '{commit,rollback}_shallow_file'
t5537: use test_write_lines and indented heredocs for readability
|
|
In previous patches, the functions 'commit_shallow_file' and
'rollback_shallow_file' were introduced to reset the shallowness
validity checks on a repository after potentially modifying
'.git/shallow'.
These functions can be made safer by wrapping the 'struct lockfile *' in
a new type, 'shallow_lock', so that they cannot be called with a raw
lock (and potentially misused by other code that happens to possess a
lockfile, but has nothing to do with shallowness).
This patch introduces that type as a thin wrapper around 'struct
lockfile', and updates the two aforementioned functions and their
callers to use it.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are many functions in commit.h that are more related to shallow
repositories than they are to any sort of generic commit machinery.
Likely this began when there were only a few shallow-related functions,
and commit.h seemed a reasonable enough place to put them.
But, now there are a good number of shallow-related functions, and
placing them all in 'commit.h' doesn't make sense.
This patch extracts a 'shallow.h', which takes all of the declarations
from 'commit.h' for functions which already exist in 'shallow.c'. We
will bring the remaining shallow-related functions defined in 'commit.c'
in a subsequent patch.
For now, move only the ones that already are implemented in 'shallow.c',
and update the necessary includes.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the function process_acks() in fetch-pack.c, the variable
received_ack is meant to track that an ACK was received, but it was
never set. This results in negotiation terminating prematurely through
the in_vain counter, when the counter should have been reset upon every
ACK.
Therefore, reset the in_vain counter upon every ACK.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When fetching, Git stops negotiation when it has sent at least
MAX_IN_VAIN (which is 256) "have" lines without having any of them
ACK-ed. But this is supposed to trigger only after the first ACK, as
pack-protocol.txt says:
However, the 256 limit *only* turns on in the canonical client
implementation if we have received at least one "ACK %s continue"
during a prior round. This helps to ensure that at least one common
ancestor is found before we give up entirely.
The code path for protocol v0 observes this, but not protocol v2,
resulting in shorter negotiation rounds but significantly larger
packfiles. Teach the code path for protocol v2 to check this criterion
only after at least one ACK was received.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
process_acks() returns 0, 1, or 2, depending on whether "ready" was
received and if not, whether at least one commit was found to be common.
Replace these magic numbers with a documented enum.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In bd0b42aed3 (fetch-pack: do not take shallow lock unnecessarily,
2019-01-10), the author noted that 'is_repository_shallow' produces
visible side-effect(s) by setting 'is_shallow' and 'shallow_stat'.
This is a problem for e.g., fetching with '--update-shallow' in a
shallow repository with 'fetch.writeCommitGraph' enabled, since the
update to '.git/shallow' will cause Git to think that the repository
isn't shallow when it is, thereby circumventing the commit-graph
compatibility check.
This causes problems in shallow repositories with at least shallow refs
that have at least one ancestor (since the client won't have those
objects, and therefore can't take the reachability closure over commits
when writing a commit-graph).
Address this by introducing thin wrappers over 'commit_lock_file' and
'rollback_lock_file' for use specifically when the lock is held over
'.git/shallow'. These wrappers (appropriately called
'commit_shallow_file' and 'rollback_shallow_file') call into their
respective functions in 'lockfile.h', but additionally reset validity
checks used by the shallow machinery.
Replace each instance of 'commit_lock_file' and 'rollback_lock_file'
with 'commit_shallow_file' and 'rollback_shallow_file' when the lock
being held is over the '.git/shallow' file.
As a result, 'prune_shallow' can now only be called once (since
'check_shallow_file_for_update' will die after calling
'reset_repository_shallow'). But, this is OK since we only call
'prune_shallow' at most once per process.
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We renamed the actual data structure in 910650d2f8 (Rename sha1_array to
oid_array, 2017-03-31), but the file is still called sha1-array. Besides
being slightly confusing, it makes it more annoying to grep for leftover
occurrences of "sha1" in various files, because the header is included
in so many places.
Let's complete the transition by renaming the source and header files
(and fixing up a few comment references).
I kept the "-" in the name, as that seems to be our style; cf.
fc1395f4a4 (sha1_file.c: rename to use dash in file name, 2018-04-10).
We also have oidmap.h and oidset.h without any punctuation, but those
are "struct oidmap" and "struct oidset" in the code. We _could_ make
this "oidarray" to match, but somehow it looks uglier to me because of
the length of "array" (plus it would be a very invasive patch for little
gain).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Trace2 annotation.
* ec/fetch-mark-common-refs-trace2:
fetch: add trace2 instrumentation
|
|
"git fetch" codepath had a big "do not lazily fetch missing objects
when I ask if something exists" switch. This has been corrected by
marking the "does this thing exist?" calls with "if not please do not
lazily fetch it" flag.
* jt/fetch-remove-lazy-fetch-plugging:
promisor-remote: remove fetch_if_missing=0
clone: remove fetch_if_missing=0
fetch: remove fetch_if_missing=0
|
|
Add trace2 regions to fetch-pack.c to better track time spent in the various
phases of a fetch:
* parsing remote refs and finding a cutoff
* marking local refs as complete
* marking complete remote refs as common
All stages could potentially be slow for repositories with many refs.
Signed-off-by: Erik Chen <erikchen@chromium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 6462d5eb9a ("fetch: remove fetch_if_missing=0", 2019-11-08)
strove to remove the need for fetch_if_missing=0 from the fetching
mechanism, so it is plausible to attempt removing fetch_if_missing=0
from the lazy-fetching mechanism in promisor-remote as well.
But doing so reveals a bug - when the server does not send an object
pointed to by a tag object, an infinite loop occurs: Git attempts to
fetch the missing object, which causes a deferencing of all refs (for
negotiation), which causes a lazy fetch of that missing object, and so
on. This bug is because of unnecessary use of the fetch negotiator
during lazy fetching - it is not used after initialization, but it is
still initialized (which causes the dereferencing of all refs).
Thus, when the negotiator is not used during fetching, refrain from
initializing it. Then, remove fetch_if_missing from promisor-remote.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Debugging support for lazy cloning has been a bit improved.
* jt/fetch-pack-record-refs-in-the-dot-promisor:
fetch-pack: write fetched refs to .promisor
|
|
In fetch_pack() (and all functions it calls), pass
OBJECT_INFO_SKIP_FETCH_OBJECT whenever we query an object that could be
a tree or blob that we do not want to be lazy-fetched even if it is
absent. Thus, the only lazy-fetches occurring for trees and blobs are
when resolving deltas.
Thus, we can remove fetch_if_missing=0 from builtin/fetch.c. Remove
this, and also add a test ensuring that such objects are not
lazy-fetched. (We might be able to remove fetch_if_missing=0 from other
places too, but I have limited myself to builtin/fetch.c in this commit
because I have not written tests for the other commands yet.)
Note that commits and tags may still be lazy-fetched. I limited myself
to objects that could be trees or blobs here because Git does not
support creating such commit- and tag-excluding clones yet, and even if
such a clone were manually created, Git does not have good support for
fetching a single commit (when fetching a commit, it and all its
ancestors would be sent).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The specification of promisor packfiles (in partial-clone.txt) states
that the .promisor files that accompany packfiles do not matter (just
like .keep files), so whenever a packfile is fetched from the promisor
remote, Git has been writing empty .promisor files. But these files
could contain more useful information.
So instead of writing empty files, write the refs fetched to these
files. This makes it easier to debug issues with partial clones, as we
can identify what refs (and their associated hashes) were fetched at the
time the packfile was downloaded, and if necessary, compare those hashes
against what the promisor remote reports now.
This is implemented by teaching fetch-pack to write its own non-empty
.promisor file whenever it knows the name of the pack's lockfile. This
covers the case wherein the user runs "git fetch" with an internal
protocol or HTTP protocol v2 (fetch_refs_via_pack() in transport.c sets
lock_pack) and with HTTP protocol v0/v1 (fetch_git() in remote-curl.c
passes "--lock-pack" to "fetch-pack").
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Acked-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dev support.
* js/trace2-fetch-push:
transport: push codepath can take arbitrary repository
push: add trace2 instrumentation
fetch: add trace2 instrumentation
|
|
Preparation for SHA-256 upgrade continues.
* bc/object-id-part17: (26 commits)
midx: switch to using the_hash_algo
builtin/show-index: replace sha1_to_hex
rerere: replace sha1_to_hex
builtin/receive-pack: replace sha1_to_hex
builtin/index-pack: replace sha1_to_hex
packfile: replace sha1_to_hex
wt-status: convert struct wt_status to object_id
cache: remove null_sha1
builtin/worktree: switch null_sha1 to null_oid
builtin/repack: write object IDs of the proper length
pack-write: use hash_to_hex when writing checksums
sequencer: convert to use the_hash_algo
bisect: switch to using the_hash_algo
sha1-lookup: switch hard-coded constants to the_hash_algo
config: use the_hash_algo in abbrev comparison
combine-diff: replace GIT_SHA1_HEXSZ with the_hash_algo
bundle: switch to use the_hash_algo
connected: switch GIT_SHA1_HEXSZ to the_hash_algo
show-index: switch hard-coded constants to the_hash_algo
blame: remove needless comparison with GIT_SHA1_HEXSZ
...
|
|
Add trace2 regions to fetch-pack.c and builtins/fetch.c to better track
time spent in the various phases of a fetch:
* listing refs
* negotiation for protocol versions v0-v2
* fetching refs
* consuming refs
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The list-objects-filter API (used to create a sparse/lazy clone)
learned to take a combined filter specification.
* md/list-objects-filter-combo:
list-objects-filter-options: make parser void
list-objects-filter-options: clean up use of ALLOC_GROW
list-objects-filter-options: allow mult. --filter
strbuf: give URL-encoding API a char predicate fn
list-objects-filter-options: make filter_spec a string_list
list-objects-filter-options: move error check up
list-objects-filter: implement composite filters
list-objects-filter-options: always supply *errbuf
list-objects-filter: put omits set in filter struct
list-objects-filter: encapsulate filter components
|
|
Instead of hard-coding constants, use parse_oid_hex to compute a pointer
and use it in further parsing operations.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
René Scharfe
Junio C Hamano
Jonathan Tan
Christian Couder
Josh Steadmon
Jeff King
brian m. carlson
Denton Liu
Taylor Blau
Erik Chen