summaryrefslogtreecommitdiff
path: root/fetch-pack.c
AgeCommit message (Collapse)AuthorFilesLines
2013-05-28clone: open a shortcut for connectivity checkLibravatar Nguyễn Thái Ngọc Duy1-1/+10
In order to make sure the cloned repository is good, we run "rev-list --objects --not --all $new_refs" on the repository. This is expensive on large repositories. This patch attempts to mitigate the impact in this special case. In the "good" clone case, we only have one pack. If all of the following are met, we can be sure that all objects reachable from the new refs exist, which is the intention of running "rev-list ...": - all refs point to an object in the pack - there are no dangling pointers in any object in the pack - no objects in the pack point to objects outside the pack The second and third checks can be done with the help of index-pack as a slight variation of --strict check (which introduces a new condition for the shortcut: pack transfer must be used and the number of objects large enough to call index-pack). The first is checked in check_everything_connected after we get an "ok" from index-pack. "index-pack + new checks" is still faster than the current "index-pack + rev-list", which is the whole point of this patch. If any of the conditions fail, we fall back to the good old but expensive "rev-list ..". In that case it's even more expensive because we have to pay for the new checks in index-pack. But that should only happen when the other side is either buggy or malicious. Cloning linux-2.6 over file:// before after real 3m25.693s 2m53.050s user 5m2.037s 4m42.396s sys 0m13.750s 0m16.574s A more realistic test with ssh:// over wireless before after real 11m26.629s 10m4.213s user 5m43.196s 5m19.444s sys 0m35.812s 0m37.630s This shortcut is not applied to shallow clones, partly because shallow clones should have no more objects than a usual fetch and the cost of rev-list is acceptable, partly to avoid dealing with corner cases when grafting is involved. This shortcut does not apply to unpack-objects code path either because the number of objects must be small in order to trigger that code path. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-28fetch-pack: prepare updated shallow file before fetching the packLibravatar Nguyễn Thái Ngọc Duy1-36/+37
index-pack --strict looks up and follows parent commits. If shallow information is not ready by the time index-pack is run, index-pack may be led to non-existent objects. Make fetch-pack save shallow file to disk before invoking index-pack. git learns new global option --shallow-file to pass on the alternate shallow file path. Undocumented (and not even support --shallow-file= syntax) because it's unlikely to be used again elsewhere. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-01Merge branch 'jk/pkt-line-cleanup'Libravatar Junio C Hamano1-9/+9
Clean up pkt-line API, implementation and its callers to make them more robust. * jk/pkt-line-cleanup: do not use GIT_TRACE_PACKET=3 in tests remote-curl: always parse incoming refs remote-curl: move ref-parsing code up in file remote-curl: pass buffer straight to get_remote_heads teach get_remote_heads to read from a memory buffer pkt-line: share buffer/descriptor reading implementation pkt-line: provide a LARGE_PACKET_MAX static buffer pkt-line: move LARGE_PACKET_MAX definition from sideband pkt-line: teach packet_read_line to chomp newlines pkt-line: provide a generic reading function with options pkt-line: drop safe_write function pkt-line: move a misplaced comment write_or_die: raise SIGPIPE when we get EPIPE upload-archive: use argv_array to store client arguments upload-archive: do not copy repo name send-pack: prefer prefixcmp over memcmp in receive_status fetch-pack: fix out-of-bounds buffer offset in get_ack upload-pack: remove packet debugging harness upload-pack: do not add duplicate objects to shallow list upload-pack: use get_sha1_hex to parse "shallow" lines
2013-03-21Merge branch 'jc/fetch-raw-sha1'Libravatar Junio C Hamano1-32/+69
Allows requests to fetch objects at any tip of refs (including hidden ones). It seems that there may be use cases even outside Gerrit (e.g. $gmane/215701). * jc/fetch-raw-sha1: fetch: fetch objects by their exact SHA-1 object names upload-pack: optionally allow fetching from the tips of hidden refs fetch: use struct ref to represent refs to be fetched parse_fetch_refspec(): clarify the codeflow a bit
2013-02-20pkt-line: provide a LARGE_PACKET_MAX static bufferLibravatar Jeff King1-6/+6
Most of the callers of packet_read_line just read into a static 1000-byte buffer (callers which handle arbitrary binary data already use LARGE_PACKET_MAX). This works fine in practice, because: 1. The only variable-sized data in these lines is a ref name, and refs tend to be a lot shorter than 1000 characters. 2. When sending ref lines, git-core always limits itself to 1000 byte packets. However, the only limit given in the protocol specification in Documentation/technical/protocol-common.txt is LARGE_PACKET_MAX; the 1000 byte limit is mentioned only in pack-protocol.txt, and then only describing what we write, not as a specific limit for readers. This patch lets us bump the 1000-byte limit to LARGE_PACKET_MAX. Even though git-core will never write a packet where this makes a difference, there are two good reasons to do this: 1. Other git implementations may have followed protocol-common.txt and used a larger maximum size. We don't bump into it in practice because it would involve very long ref names. 2. We may want to increase the 1000-byte limit one day. Since packets are transferred before any capabilities, it's difficult to do this in a backwards-compatible way. But if we bump the size of buffer the readers can handle, eventually older versions of git will be obsolete enough that we can justify bumping the writers, as well. We don't have plans to do this anytime soon, but there is no reason not to start the clock ticking now. Just bumping all of the reading bufs to LARGE_PACKET_MAX would waste memory. Instead, since most readers just read into a temporary buffer anyway, let's provide a single static buffer that all callers can use. We can further wrap this detail away by having the packet_read_line wrapper just use the buffer transparently and return a pointer to the static storage. That covers most of the cases, and the remaining ones already read into their own LARGE_PACKET_MAX buffers. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-20pkt-line: teach packet_read_line to chomp newlinesLibravatar Jeff King1-2/+0
The packets sent during ref negotiation are all terminated by newline; even though the code to chomp these newlines is short, we end up doing it in a lot of places. This patch teaches packet_read_line to auto-chomp the trailing newline; this lets us get rid of a lot of inline chomping code. As a result, some call-sites which are not reading line-oriented data (e.g., when reading chunks of packfiles alongside sideband) transition away from packet_read_line to the generic packet_read interface. This patch converts all of the existing callsites. Since the function signature of packet_read_line does not change (but its behavior does), there is a possibility of new callsites being introduced in later commits, silently introducing an incompatibility. However, since a later patch in this series will change the signature, such a commit would have to be merged directly into this commit, not to the tip of the series; we can therefore ignore the issue. This is an internal cleanup and should produce no change of behavior in the normal case. However, there is one corner case to note. Callers of packet_read_line have never been able to tell the difference between a flush packet ("0000") and an empty packet ("0004"), as both cause packet_read_line to return a length of 0. Readers treat them identically, even though Documentation/technical/protocol-common.txt says we must not; it also says that implementations should not send an empty pkt-line. By stripping out the newline before the result gets to the caller, we will now treat the newline-only packet ("0005\n") the same as an empty packet, which in turn gets treated like a flush packet. In practice this doesn't matter, as neither empty nor newline-only packets are part of git's protocols (at least not for the line-oriented bits, and readers who are not expecting line-oriented packets will be calling packet_read directly, anyway). But even if we do decide to care about the distinction later, it is orthogonal to this patch. The right place to tighten would be to stop treating empty packets as flush packets, and this change does not make doing so any harder. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-20pkt-line: drop safe_write functionLibravatar Jeff King1-1/+1
This is just write_or_die by another name. The one distinction is that write_or_die will treat EPIPE specially by suppressing error messages. That's fine, as we die by SIGPIPE anyway (and in the off chance that it is disabled, write_or_die will simulate it). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-20fetch-pack: fix out-of-bounds buffer offset in get_ackLibravatar Jeff King1-0/+2
When we read acks from the remote, we expect either: ACK <sha1> or ACK <sha1> <multi-ack-flag> We parse the "ACK <sha1>" bit from the line, and then start looking for the flag strings at "line+45"; if we don't have them, we assume it's of the first type. But if we do have the first type, then line+45 is not necessarily inside our string at all! It turns out that this works most of the time due to the way we parse the packets. They should come in with a newline, and packet_read puts an extra NUL into the buffer, so we end up with: ACK <sha1>\n\0 with the newline at offset 44 and the NUL at offset 45. We then strip the newline, putting a NUL at offset 44. So when we look at "line+45", we are looking past the end of our string; but it's OK, because we hit the terminator from the original string. This breaks down, however, if the other side does not terminate their packets with a newline. In that case, our packet is one character shorter, and we start looking through uninitialized memory for the flag. No known implementation sends such a packet, so it has never come up in practice. This patch tightens the check by looking for a short, flagless ACK before trying to parse the flag. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-07fetch: fetch objects by their exact SHA-1 object namesLibravatar Junio C Hamano1-1/+21
Teach "git fetch" to accept an exact SHA-1 object name the user may obtain out of band on the LHS of a pathspec, and send it on a "want" message when the server side advertises the allow-tip-sha1-in-want capability. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-07fetch: use struct ref to represent refs to be fetchedLibravatar Junio C Hamano1-31/+48
Even though "git fetch" has full infrastructure to parse refspecs to be fetched and match them against the list of refs to come up with the final list of refs to be fetched, the list of refs that are requested to be fetched were internally converted to a plain list of strings at the transport layer and then passed to the underlying fetch-pack driver. Stop this conversion and instead pass around an array of refs. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-01Merge branch 'jk/gc-auto-after-fetch'Libravatar Junio C Hamano1-0/+3
Help "fetch only" repositories that do not trigger "gc --auto" often enough. * jk/gc-auto-after-fetch: fetch-pack: avoid repeatedly re-scanning pack directory fetch: run gc --auto after fetching
2013-01-26Merge branch 'jk/maint-gc-auto-after-fetch' into jk/gc-auto-after-fetchLibravatar Junio C Hamano1-0/+3
* jk/maint-gc-auto-after-fetch: fetch-pack: avoid repeatedly re-scanning pack directory fetch: run gc --auto after fetching
2013-01-03Merge branch 'mk/qnx'Libravatar Junio C Hamano1-2/+1
Port to QNX. * mk/qnx: Port to QNX Make lock local to fetch_pack
2012-10-29fetch-pack: move core code to libgit.aLibravatar Nguyễn Thái Ngọc Duy1-0/+951
fetch_pack() is used by transport.c, part of libgit.a while it stays in builtin/fetch-pack.c. Move it to fetch-pack.c so that we won't get undefined reference if a program that uses libgit.a happens to pull it in. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jeff King <peff@peff.net>
2007-09-19Make fetch-pack a builtin with an internal APILibravatar Daniel Barkalow1-789/+0
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07War on whitespaceLibravatar Junio C Hamano1-1/+1
This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-05-16connect: display connection progressLibravatar Michael S. Tsirkin1-1/+1
Make git notify the user about host resolution/connection attempts. This is useful both as a progress indicator on slow links, and helps reassure the user there are no firewall problems. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-04Merge branch 'js/fetch-progress' (early part)Libravatar Junio C Hamano1-3/+9
* 'js/fetch-progress' (early part): Fixup no-progress for fetch & clone fetch & clone: do not output progress when not on a tty Conflicts: git-fetch.sh
2007-02-24Fixup no-progress for fetch & cloneLibravatar Johannes Schindelin1-7/+3
The intent of the commit 'fetch & clone: do not output progress when not on a tty' was to make fetching and cloning less chatty when output was not redirected (such as in a cron job). However, there was a serious thinko in that commit. It assumed that the client _and_ the server got this update at the same time. But this is obviously not the case, and therefore upload-pack died on seeing the option "--no-progress". This patch fixes that issue by making it a protocol option. So, until your server is updated, you still see the progress, but once the server has this patch, it will be quiet. A minor issue was also fixed: when cloning, the checkout did not heed no_progress. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-20prefixcmp(): fix-up mechanical conversion.Libravatar Junio C Hamano1-5/+5
Previous step converted use of strncmp() with literal string mechanically even when the result is only used as a boolean: if (!strncmp("foo", arg, 3)) ==> if (!(-prefixcmp(arg, "foo"))) This step manually cleans them up to read: if (!prefixcmp(arg, "foo")) Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-20Mechanical conversion to use prefixcmp()Libravatar Junio C Hamano1-6/+6
This mechanically converts strncmp() to use prefixcmp(), but only when the parameters match specific patterns, so that they can be verified easily. Leftover from this will be fixed in a separate step, including idiotic conversions like if (!strncmp("foo", arg, 3)) => if (!(-prefixcmp(arg, "foo"))) This was done by using this script in px.perl #!/usr/bin/perl -i.bak -p if (/strncmp\(([^,]+), "([^\\"]*)", (\d+)\)/ && (length($2) == $3)) { s|strncmp\(([^,]+), "([^\\"]*)", (\d+)\)|prefixcmp($1, "$2")|; } if (/strncmp\("([^\\"]*)", ([^,]+), (\d+)\)/ && (length($1) == $3)) { s|strncmp\("([^\\"]*)", ([^,]+), (\d+)\)|(-prefixcmp($2, "$1"))|; } and running: $ git grep -l strncmp -- '*.c' | xargs perl px.perl Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-19fetch & clone: do not output progress when not on a ttyLibravatar Johannes Schindelin1-3/+13
This adds the option "--no-progress" to fetch-pack and upload-pack, and makes fetch and clone pass this option when stdout is not a tty. While at documenting that option, also document --strict and --timeout options for upload-pack. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-28Don't force everybody to call setup_ident().Libravatar Junio C Hamano1-1/+0
Back when only handful commands that created commit and tag were the only users of committer identity information, it made sense to explicitly call setup_ident() to pre-fill the default value from the gecos information. But it is much simpler for programs to make the call automatic when get_ident() is called these days, since many more programs want to use the information when updating the reflog. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-24Consolidate {receive,fetch}.unpackLimitLibravatar Junio C Hamano1-1/+13
This allows transfer.unpackLimit to specify what these two configuration variables want to set. We would probably want to deprecate the two separate variables, as I do not see much point in specifying them independently. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-24fetch-pack: remove --keep-auto and make it the default.Libravatar Junio C Hamano1-14/+17
This makes git-fetch over git native protocol to automatically decide to keep the downloaded pack if the fetch results in more than 100 objects, just like receive-pack invoked by git-push does. This logic is disabled when --keep is explicitly given from the command line, so that a very small clone still keeps the downloaded pack as before. The 100 threshold can be adjusted with fetch.unpacklimit configuration. We might want to introduce transfer.unpacklimit to consolidate the two unpacklimit variables, which will be a topic for the next patch. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-24Allow fetch-pack to decide keeping the fetched pack without explodingLibravatar Junio C Hamano1-32/+59
With --keep-auto option, fetch-pack decides to keep the pack without exploding it just like receive-pack does. We may want to later make this the default. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-24rename --exec to --upload-pack for fetch-pack and peek-remoteLibravatar Uwe Kleine-König1-4/+8
Just some option name disambiguation. This is the counter part to commit d23842fd which made a similar change for push and send-pack. --exec continues to work. Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-19Update documentation of fetch-pack, push and send-packLibravatar Uwe Kleine-König1-1/+1
add all supported options to Documentation/git-....txt and the usage strings. Signed-off-by: Uwe Kleine-König <zeisberg@informatik.uni-freiburg.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-02fetch-pack: do not use lockfile structure on stack.Libravatar Junio C Hamano1-1/+2
They are used in atexit() for clean-up, and you will be accessing unallocated memory at that point. See 31f584c2 for the fix for a similar problem. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-27Merge branch 'master' into js/shallowLibravatar Junio C Hamano1-1/+25
This is to adjust to: count-objects -v: show number of packs as well. which will break a test in this series. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-20simplify inclusion of system header files.Libravatar Junio C Hamano1-1/+0
This is a mechanical clean-up of the way *.c files include system header files. (1) sources under compat/, platform sha-1 implementations, and xdelta code are exempt from the following rules; (2) the first #include must be "git-compat-util.h" or one of our own header file that includes it first (e.g. config.h, builtin.h, pkt-line.h); (3) system headers that are included in "git-compat-util.h" need not be included in individual C source files. (4) "git-compat-util.h" does not have to include subsystem specific header files (e.g. expat.h). Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-11-25fetch-pack: do not barf when duplicate re patterns are givenLibravatar Junio C Hamano1-0/+25
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-11-24fetch-pack: Do not fetch tags for shallow clones.Libravatar Alexandre Julliard1-1/+2
A better fix may be to only fetch tags that point to commits that we are downloading, but git-clone doesn't have support for following tags. This will happen automatically on the next git-fetch though. Signed-off-by: Alexandre Julliard <julliard@winehq.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-11-24fetch-pack: Properly remove the shallow file when it becomes empty.Libravatar Alexandre Julliard1-1/+1
The code was unlinking the lock file instead. Signed-off-by: Alexandre Julliard <julliard@winehq.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-11-24Why does it mean we do not have to register shallow if we have one?Libravatar Junio C Hamano1-3/+0
2006-11-24We should make sure that the protocol is still extensible.Libravatar Junio C Hamano1-4/+7
This just reformats if .. else if .. else chain to make it clear we are handling extended response from the other end.
2006-11-24allow deepening of a shallow repositoryLibravatar Johannes Schindelin1-6/+16
Now, by saying "git fetch -depth <n> <repo>" you can deepen a shallow repository. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-11-24allow cloning a repository "shallowly"Libravatar Johannes Schindelin1-1/+60
By specifying a depth, you can now clone a repository such that all fetched ancestor-chains' length is at most "depth". For example, if the upstream repository has only 2 branches ("A" and "B"), which are linear, and you specify depth 3, you will get A, A~1, A~2, A~3, B, B~1, B~2, and B~3. The ends are automatically made shallow commits. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-11-24support fetching into a shallow repositoryLibravatar Johannes Schindelin1-0/+4
A shallow commit is a commit which has parents, which in turn are "grafted away", i.e. the commit appears as if it were a root. Since these shallow commits should not be edited by the user, but only by core git, they are recorded in the file $GIT_DIR/shallow. A repository containing shallow commits is called shallow. The advantage of a shallow repository is that even if the upstream contains lots of history, your local (shallow) repository needs not occupy much disk space. The disadvantage is that you might miss a merge base when pulling some remote branch. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-11-03improve fetch-pack's handling of kept packsLibravatar Nicolas Pitre1-7/+103
Since functions in fetch-clone.c were only used from fetch-pack.c, its content has been merged with fetch-pack.c. This allows for better coupling of features with much simpler implementations. One new thing is that the (abscence of) --thin also enforce it on index-pack now, such that index-pack will abort if a thin pack was _not_ asked for. The -k or --keep, when provided twice, now causes the fetched pack to be left as a kept pack just like receive-pack currently does. Eventually this will be used to close a race against concurrent repacking. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-11-03Merge branch 'master' into np/index-packLibravatar Junio C Hamano1-4/+4
* master: (90 commits) gitweb: Better support for non-CSS aware web browsers gitweb: Output also empty patches in "commitdiff" view gitweb: Use git-for-each-ref to generate list of heads and/or tags for-each-ref: "creator" and "creatordate" fields Add --global option to git-repo-config. pack-refs: Store the full name of the ref even when packing only tags. git-clone documentation didn't mention --origin as equivalent of -o Minor grammar fixes for git-diff-index.txt link_temp_to_file: call adjust_shared_perm() only when we created the directory Remove uneccessarily similar printf() from print_ref_list() in builtin-branch pack-objects doesn't create random pack names branch: work in subdirectories. gitweb: Use 's' regexp modifier to secure against filenames with LF gitweb: Secure against commit-ish/tree-ish with the same name as path gitweb: esc_html() author in blame git-svnimport: support for partial imports link_temp_to_file: don't leave the path truncated on adjust_shared_perm failure Move deny_non_fast_forwards handling completely into receive-pack. revision traversal: --unpacked does not limit commit list anymore. Continue traversal when rev-list --unpacked finds a packed commit. ...
2006-11-01Merge branch 'lj/refs'Libravatar Junio C Hamano1-4/+4
* lj/refs: (63 commits) Fix show-ref usagestring t3200: git-branch testsuite update sha1_name.c: avoid compilation warnings. Make git-branch a builtin ref-log: fix D/F conflict coming from deleted refs. git-revert with conflicts to behave as git-merge with conflicts core.logallrefupdates thinko-fix git-pack-refs --all core.logallrefupdates create new log file only for branch heads. Remove bashism from t3210-pack-refs.sh ref-log: allow ref@{count} syntax. pack-refs: call fflush before fsync. pack-refs: use lockfile as everybody else does. git-fetch: do not look into $GIT_DIR/refs to see if a tag exists. lock_ref_sha1_basic does not remove empty directories on BSD Do not create tag leading directories since git update-ref does it. Check that a tag exists using show-ref instead of looking for the ref file. Use git-update-ref to delete a tag instead of rm()ing the ref file. Fix refs.c;:repack_without_ref() clean-up path Clean up "git-branch.sh" and add remove recursive dir test cases. ...
2006-10-27enhance clone and fetch -k experienceLibravatar Nicolas Pitre1-2/+0
Now that index-pack can be streamed with a pack, it is probably a good idea to use it directly instead of creating a temporary file and running index-pack afterwards. This way index-pack can abort early whenever a corruption is encountered even if the pack has not been fully downloaded, it can display a progress percentage as it knows how much to expects, and it is a bit faster since the pack indexing is partially done as data is received. Using fetch -k doesn't need to disable thin pack generation on the remote end either. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-27let the GIT native protocol use offsets to delta base when possibleLibravatar Nicolas Pitre1-2/+3
There is no reason not to always do this when both ends agree. Therefore a client that can accept offsets to delta base always sends the "ofs-delta" flag. The server will stream a pack with or without offset to delta base depending on whether that flag is provided or not with no additional cost. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-20Tell between packed, unpacked and symbolic refs.Libravatar Junio C Hamano1-2/+2
This adds a "int *flag" parameter to resolve_ref() and makes for_each_ref() family to call callback function with an extra "int flag" parameter. They are used to give two bits of information (REF_ISSYMREF and REF_ISPACKED) about the ref. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-20Add callback data to for_each_ref() family.Libravatar Junio C Hamano1-4/+4
This is a long overdue fix to the API for for_each_ref() family of functions. It allows the callers to specify a callback data pointer, so that the caller does not have to use static variables to communicate with the callback funciton. The updated for_each_ref() family takes a function of type int (*fn)(const char *, const unsigned char *, void *) and a void pointer as parameters, and calls the function with the name of the ref and its SHA-1 with the caller-supplied void pointer as parameters. The commit updates two callers, builtin-name-rev.c and builtin-pack-refs.c as an example. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-17Merge branch 'jc/archive'Libravatar Junio C Hamano1-3/+9
* jc/archive: git-tar-tree: devolve git-tar-tree into a wrapper for git-archive git-archive: inline default_parse_extra() builtin-archive.c: rename remote_request() to extract_remote_arg() upload-archive: monitor child communication more carefully. Add sideband status report to git-archive protocol Prepare larger packet buffer for upload-pack protocol. Teach --exec to git-archive --remote Add --verbose to git-archive archive: force line buffered output to stderr Use xstrdup instead of strdup in builtin-{tar,zip}-tree.c Move sideband server side support into reusable form. Move sideband client side support into reusable form. archive: allow remote to have more formats than we understand. git-archive: make compression level of ZIP archives configurable Add git-upload-archive git-archive: wire up ZIP format. git-archive: wire up TAR format. Add git-archive
2006-09-13Test return value of finish_connect()Libravatar Franck Bui-Huu1-2/+2
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-10Prepare larger packet buffer for upload-pack protocol.Libravatar Junio C Hamano1-3/+9
The original side-band support added to the upload-pack protocol used the default 1000-byte packet length. The pkt-line format allows up to 64k, so prepare the receiver for the maximum size, and have the uploader and downloader negotiate if larger packet length is allowed. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-23Convert memcpy(a,b,20) to hashcpy(a,b).Libravatar Shawn Pearce1-1/+1
This abstracts away the size of the hash values when copying them from memory location to memory location, much as the introduction of hashcmp abstracted away hash value comparsion. A few call sites were using char* rather than unsigned char* so I added the cast rather than open hashcpy to be void*. This is a reasonable tradeoff as most call sites already use unsigned char* and the existing hashcmp is also declared to be unsigned char*. [jc: Splitted the patch to "master" part, to be followed by a patch for merge-recursive.c which is not in "master" yet. Fixed the cast in the latter hunk to combine-diff.c which was wrong in the original. Also converted ones left-over in combine-diff.c, diff-lib.c and upload-pack.c ] Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>