Age | Commit message (Collapse) | Author | Files | Lines |
|
The hashclose() method behaves very differently depending on the flags
parameter. In particular, the file descriptor is not always closed.
Perform a simple rename of "hashclose()" to "finalize_hashfile()" in
preparation for functional changes.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename struct sha1file to struct hashfile, along with all of its related
functions.
The transformation in this commit was made by global search-and-replace.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Switch various uses of explicit calls to SHA-1 to use the_hash_algo.
Convert various uses of 20 and the GIT_SHA1 constants as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All but two of the call sites already have parameters using the hash
parameter of struct object_id, so convert them to take a pointer to the
struct directly. Also convert refs_read_refs_full, the underlying
implementation.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the ref transaction code to use struct object_id. Remove one
NULL pointer check which was previously inserted around a dereference;
since we now pass a pointer to struct object_id directly through, the
code we're calling handles this for us.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The checkpoint command "git fast-import" did not flush updates to
refs and marks unless at least one object was created since the
last checkpoint, which has been corrected, as these things can
happen without any new object getting created.
* er/fast-import-dump-refs-on-checkpoint:
fast-import: checkpoint: dump branches/tags/marks even if object_count==0
|
|
The checkpoint command cycles packfiles if object_count != 0, a sensible
test or there would be no pack files to write. Since 820b931012, the
command also dumps branches, tags and marks, but still conditionally.
However, it is possible for a command stream to modify refs or create
marks without creating any new objects.
For example, reset a branch (and keep fast-import running):
$ git fast-import
reset refs/heads/master
from refs/heads/master^
checkpoint
but refs/heads/master remains unchanged.
Other example: a commit command that re-creates an object that already
exists in the object database.
The man page also states that checkpoint "updates the refs" and that
"placing a progress command immediately after a checkpoint will inform
the reader when the checkpoint has been completed and it can safely
access the refs that fast-import updated". This wasn't always true
without this patch.
This fix unconditionally calls dump_{branches,tags,marks}() for all
checkpoint commands. dump_branches() and dump_tags() are cheap to call
in the case of a no-op.
Add tests to t9300 that observe the (non-packfiles) effects of
checkpoint.
Signed-off-by: Eric Rannaud <e@nanocritical.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many codepaths did not diagnose write failures correctly when disks
go full, due to their misuse of write_in_full() helper function,
which have been corrected.
* jk/write-in-full-fix:
read_pack_header: handle signed/unsigned comparison in read result
config: flip return value of store_write_*()
notes-merge: use ssize_t for write_in_full() return value
pkt-line: check write_in_full() errors against "< 0"
convert less-trivial versions of "write_in_full() != len"
avoid "write_in_full(fd, buf, len) != len" pattern
get-tar-commit-id: check write_in_full() return against 0
config: avoid "write_in_full(fd, buf, len) < len" pattern
|
|
The return value of write_in_full() is either "-1", or the
requested number of bytes[1]. If we make a partial write
before seeing an error, we still return -1, not a partial
value. This goes back to f6aa66cb95 (write_in_full: really
write in full or return error on disk full., 2007-01-11).
So checking anything except "was the return value negative"
is pointless. And there are a couple of reasons not to do
so:
1. It can do a funny signed/unsigned comparison. If your
"len" is signed (e.g., a size_t) then the compiler will
promote the "-1" to its unsigned variant.
This works out for "!= len" (unless you really were
trying to write the maximum size_t bytes), but is a
bug if you check "< len" (an example of which was fixed
recently in config.c).
We should avoid promoting the mental model that you
need to check the length at all, so that new sites are
not tempted to copy us.
2. Checking for a negative value is shorter to type,
especially when the length is an expression.
3. Linus says so. In d34cf19b89 (Clean up write_in_full()
users, 2007-01-11), right after the write_in_full()
semantics were changed, he wrote:
I really wish every "write_in_full()" user would just
check against "<0" now, but this fixes the nasty and
stupid ones.
Appeals to authority aside, this makes it clear that
writing it this way does not have an intentional
benefit. It's a historical curiosity that we never
bothered to clean up (and which was undoubtedly
cargo-culted into new sites).
So let's convert these obviously-correct cases (this
includes write_str_in_full(), which is just a wrapper for
write_in_full()).
[1] A careful reader may notice there is one way that
write_in_full() can return a different value. If we ask
write() to write N bytes and get a return value that is
_larger_ than N, we could return a larger total. But
besides the fact that this would imply a totally broken
version of write(), it would already invoke undefined
behavior. Our internal remaining counter is an unsigned
size_t, which means that subtracting too many byte will
wrap it around to a very large number. So we'll instantly
begin reading off the end of the buffer, trying to write
gigabytes (or petabytes) of data.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, sha1_file.c and cache.h contain many functions, both related
to and unrelated to packfiles. This makes both files very large and
causes an unclear separation of concerns.
Create a new file, packfile.c, to hold all packfile-related functions
currently in sha1_file.c. It has a corresponding header packfile.h.
In this commit, the pack name-related functions are moved. Subsequent
commits will move the other functions.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A common pattern to free a piece of memory and assign NULL to the
pointer that used to point at it has been replaced with a new
FREE_AND_NULL() macro.
* ab/free-and-null:
*.[ch] refactoring: make use of the FREE_AND_NULL() macro
coccinelle: make use of the "expression" FREE_AND_NULL() rule
coccinelle: add a rule to make "expression" code use FREE_AND_NULL()
coccinelle: make use of the "type" FREE_AND_NULL() rule
coccinelle: add a rule to make "type" code use FREE_AND_NULL()
git-compat-util: add a FREE_AND_NULL() wrapper around free(ptr); ptr = NULL
|
|
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
|
|
"fast-import" uses a default pack chain depth that is consistent
with other parts of the system.
* mh/fast-import-raise-default-depth:
fast-import: increase the default pack depth to 50
|
|
Apply the result of the just-added coccinelle rule. This manually
excludes a few occurrences, mostly things that resulted in many
FREE_AND_NULL() on one line, that'll be manually fixed in a subsequent
change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We often try to open a file for reading whose existence is
optional, and silently ignore errors from open/fopen; report such
errors if they are not due to missing files.
* nd/fopen-errors:
mingw_fopen: report ENOENT for invalid file names
mingw: verify that paths are not mistaken for remote nicknames
log: fix memory leak in open_next_file()
rerere.c: move error_errno() closer to the source system call
print errno when reporting a system call error
wrapper.c: make warn_on_inaccessible() static
wrapper.c: add and use fopen_or_warn()
wrapper.c: add and use warn_on_fopen_errors()
config.mak.uname: set FREAD_READS_DIRECTORIES for Darwin, too
config.mak.uname: set FREAD_READS_DIRECTORIES for Linux and FreeBSD
clone: use xfopen() instead of fopen()
use xfopen() in more places
git_fopen: fix a sparse 'not declared' warning
|
|
In 618e613a70, 10 years ago, the default for pack depth used for
git-pack-objects and git-repack was changed from 10 to 50, while
leaving fast-import's default to 10.
There doesn't seem to be a reason besides oversight for the change not
having happened in fast-import as well.
Interestingly, fast-import uses pack.depth when it's set, and the
git-config manual says the default for pack.depth is 50. While the
git-fast-import manual does say the default depth is 10, the
inconsistency is also confusing.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
xfopen()
- provides error details
- explains error on reading, or writing, or whatever operation
- has l10n support
- prints file name in the error
Some of these are missing in the places that are replaced with xfopen(),
which is a clear win. In some other places, it's just less code (not as
clearly a win as the previous case but still is).
The only slight regresssion is in remote-testsvn, where we don't report
the file class (marks files) in the error messages anymore. But since
this is a _test_ svn remote transport, I'm not too concerned.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert struct pack_idx_entry to use struct object_id by changing the
definition and applying the following semantic patch, plus the standard
object_id transforms:
@@
struct pack_idx_entry E1;
@@
- E1.sha1
+ E1.oid.hash
@@
struct pack_idx_entry *E1;
@@
- E1->sha1
+ E1->oid.hash
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert lookup_commit, lookup_commit_or_die,
lookup_commit_reference, and lookup_commit_reference_gently to take
struct object_id arguments.
Introduce a temporary in parse_object buffer in order to convert this
function. This is required since in order to convert parse_object and
parse_object_buffer, lookup_commit_reference_gently and
lookup_commit_or_die would need to be converted. Not introducing a
temporary would therefore require that lookup_commit_or_die take a
struct object_id *, but lookup_commit would take unsigned char *,
leaving a confusing and hard-to-use interface.
parse_object_buffer will lose this temporary in a later patch.
This commit was created with manual changes to commit.c, commit.h, and
object.c, plus the following semantic patch:
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1.hash, E2)
+ lookup_commit_reference_gently(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1->hash, E2)
+ lookup_commit_reference_gently(E1, E2)
@@
expression E1;
@@
- lookup_commit_reference(E1.hash)
+ lookup_commit_reference(&E1)
@@
expression E1;
@@
- lookup_commit_reference(E1->hash)
+ lookup_commit_reference(E1)
@@
expression E1;
@@
- lookup_commit(E1.hash)
+ lookup_commit(&E1)
@@
expression E1;
@@
- lookup_commit(E1->hash)
+ lookup_commit(E1)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1.hash, E2)
+ lookup_commit_or_die(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1->hash, E2)
+ lookup_commit_or_die(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the remaining parts of fast-import.c to use struct object_id.
Convert several instances of get_sha1_hex to parse_oid_hex to avoid
needing to specify constants. Convert other hardcoded values to named
constants. Finally, use the is_empty_tree_oid function instead of a
direct comparison against a fixed string.
Note that the odd computation with GIT_MAX_HEXSZ is due to the insertion
of a slash between every two hex digits in the path, plus one for the
terminating NUL.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert struct tree_entry_ms, struct branch, struct tag, and struct
hash_list to use struct object_id by changing the definition and
applying the following semantic patch, plus the standard object_id
transforms:
@@
struct tree_entry_ms E1;
@@
- E1.sha1
+ E1.oid.hash
@@
struct tree_entry_ms *E1;
@@
- E1->sha1
+ E1->oid.hash
@@
struct branch E1;
@@
- E1.sha1
+ E1.oid.hash
@@
struct branch *E1;
@@
- E1->sha1
+ E1->oid.hash
@@
struct tag E1;
@@
- E1.sha1
+ E1.oid.hash
@@
struct tag *E1;
@@
- E1->sha1
+ E1->oid.hash
@@
struct hash_list E1;
@@
- E1.sha1
+ E1.oid.hash
@@
struct hash_list *E1;
@@
- E1->sha1
+ E1->oid.hash
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While handy, "git_path()" is a dangerous function to use as a
callsite that uses it safely one day can be broken by changes
to other code that calls it. Reduction of its use continues.
* jk/war-on-git-path:
am: drop "dir" parameter from am_state_init
replace strbuf_addstr(git_path()) with git_path_buf()
replace xstrdup(git_path(...)) with git_pathdup(...)
use git_path_* helper functions
branch: add edit_description() helper
bisect: add git_path_bisect_terms helper
|
|
It's more efficient to use git_pathdup(), as it skips an
extra copy of the path. And by removing some calls to
git_path(), it makes it easier to audit for dangerous uses.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The odb_mkstemp() function expects the caller to provide a
fixed buffer to write the resulting tempfile name into. But
it creates the template using snprintf without checking the
return value. This means we could silently truncate the
filename.
In practice, it's unlikely that the truncation would end in
the template-pattern that mkstemp needs to open the file. So
we'd probably end up failing either way, unless the path was
specially crafted.
The simplest fix would be to notice the truncation and die.
However, we can observe that most callers immediately
xstrdup() the result anyway. So instead, let's switch to
using a strbuf, which is easier for them (and isn't a big
deal for the other 2 callers, who can just strbuf_release
when they're done with it).
Note that many of the callers used static buffers, but this
was purely to avoid putting a large buffer on the stack. We
never passed the static buffers out of the function, so
there's no complicated memory handling we need to change.
Signed-off-by: Jeff King <peff@peff.net>
|
|
Code clean-up.
* jk/fast-import-cleanup:
pack.h: define largest possible encoded object size
encode_in_pack_object_header: respect output buffer length
fast-import: use xsnprintf for formatting headers
fast-import: use xsnprintf for writing sha1s
|
|
The encode_in_pack_object_header() writes a variable-length
header to an output buffer, but it doesn't actually know
long the buffer is. At first glance, this looks like it
might be possible to overflow.
In practice, this is probably impossible. The smallest
buffer we use is 10 bytes, which would hold the header for
an object up to 2^67 bytes. Obviously we're not likely to
see such an object, but we might worry that an object could
lie about its size (causing us to overflow before we realize
it does not actually have that many bytes). But the argument
is passed as a uintmax_t. Even on systems that have __int128
available, uintmax_t is typically restricted to 64-bit by
the ABI.
So it's unlikely that a system exists where this could be
exploited. Still, it's easy enough to use a normal out/len
pair and make sure we don't write too far. That protects the
hypothetical 128-bit system, makes it harder for callers to
accidentally specify a too-small buffer, and makes the
resulting code easier to audit.
Note that the one caller in fast-import tried to catch such
a case, but did so _after_ the call (at which point we'd
have already overflowed!). This check can now go away.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The stream_blob() function checks the return value of
snprintf and dies. This is more simply done with
xsnprintf (and matches the similar call in store_object).
The message the user would get is less specific, but since
the point is that this _shouldn't_ ever happen, that's OK.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we have to write a sha1 with a newline, we do so by
copying both into a single buffer, so that we can issue a
single write() call.
We use snprintf but don't bother to check the output, since
we know it will fit. However, we should use xsnprintf() in
such a case so that we're notified if our assumption turns
out to be wrong (and to make it easier to audit for
unchecked snprintf calls).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* jk/pack-name-cleanups:
index-pack: make pointer-alias fallbacks safer
replace snprintf with odb_pack_name()
odb_pack_keep(): stop generating keepfile name
sha1_file.c: make pack-name helper globally accessible
move odb_* declarations out of git-compat-util.h
|
|
In several places we write the name of the pack filename
into a fixed-size buffer using snprintf(), but do not check
the return value. As a result, a very long object directory
could cause us to quietly truncate the pack filename
(potentially leading to a corrupted repository, as a newly
written packfile could be missing its .pack extension).
We can use odb_pack_name() to do this with a strbuf (and
shorten the code, as well).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The odb_pack_keep() function generates the name of a .keep
file and opens it. This has two problems:
1. It requires a fixed-size buffer to create the filename
and doesn't notice when the result is truncated.
2. Of the two callers, one sometimes wants to open a
filename it already has, which makes things awkward (it
has to do so manually, and skips the leading-directory
creation).
Instead, let's have odb_pack_keep() just open the file.
Generating the name isn't hard, and a future patch will
switch callers over to odb_pack_name() anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the current branch is renamed with 'git branch -m/-M' or deleted
with 'git update-ref -m<msg> -d', the event is recorded in HEAD's log
with an empty message. In preparation for adding a more meaningful
message to HEAD's log in these cases, update delete_ref() to take a
message argument and pass it along to ref_transaction_delete().
Modify all callers to pass NULL for the new message argument; no
change in behavior is intended.
Note that this is relevant for HEAD's log but not for the deleted
ref's log, which is currently deleted along with the ref. Even if it
were not, an entry for the deletion wouldn't be present in the deleted
ref's log. files_transaction_commit() writes to the log if
REF_NEEDS_COMMIT or REF_LOG_ONLY are set, but lock_ref_for_update()
doesn't set REF_NEEDS_COMMIT for the deleted ref because REF_DELETING
is set. In contrast, the update for HEAD has REF_LOG_ONLY set by
split_head_update(), resulting in the deletion being logged.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fast-import" sometimes mishandled while rebalancing notes
tree, which has been fixed.
* mh/fast-import-notes-fix-new:
fast-import: properly fanout notes when tree is imported
|
|
In typical uses of fast-import, trees are inherited from a parent
commit. In that case, the tree_entry for the branch looks like:
.versions[1].sha1 = $some_sha1
.tree = <tree structure loaded from $some_sha1>
However, when trees are imported, rather than inherited, that is not the
case. One can import a tree with a filemodify command, replacing the
root tree object.
e.g.
"M 040000 $some_sha1 \n"
In this case, the tree_entry for the branch looks like:
.versions[1].sha1 = $some_sha1
.tree = NULL
When adding new notes with the notemodify command, do_change_note_fanout
is called to get a notes count, and to do so, it loops over the
tree_entry->tree, but doesn't do anything when the tree is NULL.
In the latter case above, it means do_change_note_fanout thinks the tree
contains no notes, and new notes are added with no fanout.
Interestingly, do_change_note_fanout does check whether subdirectories
have a NULL .tree, in which case it uses load_tree(). Which means the
right behaviour happens when using the filemodify command to import
subdirectories.
This change makes do_change_note_fanount call load_tree() whenever the
tree_entry it is given has no tree loaded, making all cases handled
equally.
Signed-off-by: Mike Hommey <mh@glandium.org>
Reviewed-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are three codepaths that use a variable whose name is
pack_compression_level to affect how objects and deltas sent to a
packfile is compressed. Unlike zlib_compression_level that controls
the loose object compression, however, this variable was static to
each of these codepaths. Two of them read the pack.compression
configuration variable, using core.compression as the default, and
one of them also allowed overriding it from the command line.
The other codepath in bulk-checkin did not pay any attention to the
configuration.
Unify the configuration parsing to git_default_config(), where we
implement the parsing of core.loosecompression and core.compression
and make the former override the latter, by moving code to parse
pack.compression and also allow core.compression to give default to
this variable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply the semantic patch contrib/coccinelle/qsort.cocci to the code
base, replacing calls of qsort(3) with QSORT. The resulting code is
shorter and supports empty arrays with NULL pointers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are certain house-keeping tasks that need to be performed at
the very beginning of any Git program, and programs that are not
built-in commands had to do them exactly the same way as "git"
potty does. It was easy to make mistakes in one-off standalone
programs (like test helpers). A common "main()" function that
calls cmd_main() of individual program has been introduced to
make it harder to make mistakes.
* jk/common-main:
mingw: declare main()'s argv as const
common-main: call git_setup_gettext()
common-main: call restore_sigpipe_to_default()
common-main: call sanitize_stdfds()
common-main: call git_extract_argv0_path()
add an extra level of indirection to main()
|
|
* jk/common-main-2.8:
mingw: declare main()'s argv as const
common-main: call git_setup_gettext()
common-main: call restore_sigpipe_to_default()
common-main: call sanitize_stdfds()
common-main: call git_extract_argv0_path()
add an extra level of indirection to main()
|
|
This should be part of every program, as otherwise users do
not get translated error messages. However, some external
commands forgot to do so (e.g., git-credential-store). This
fixes them, and eliminates the repeated code in programs
that did remember to use it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Every program which links against libgit.a must call this
function, or risk hitting an assert() in system_path() that
checks whether we have configured argv0_path (though only
when RUNTIME_PREFIX is defined, so essentially only on
Windows).
Looking at the diff, you can see that putting it into the
common main() saves us having to do it individually in each
of the external commands. But what you can't see are the
cases where we _should_ have been doing so, but weren't
(e.g., git-credential-store, and all of the t/helper test
programs).
This has been an accident-waiting-to-happen for a long time,
but wasn't triggered until recently because it involves one
of those programs actually calling system_path(). That
happened with git-credential-store in v2.8.0 with ae5f677
(lazily load core.sharedrepository, 2016-03-11). The
program:
- takes a lock file, which...
- opens a tempfile, which...
- calls adjust_shared_perm to fix permissions, which...
- lazy-loads the config (as of ae5f677), which...
- calls system_path() to find the location of
/etc/gitconfig
On systems with RUNTIME_PREFIX, this means credential-store
reliably hits that assert() and cannot be used.
We never noticed in the test suite, because we set
GIT_CONFIG_NOSYSTEM there, which skips the system_path()
lookup entirely. But if we were to tweak git_config() to
find /etc/gitconfig even when we aren't going to open it,
then the test suite shows multiple failures (for
credential-store, and for some other test helpers). I didn't
include that tweak here because it's way too specific to
this particular call to be worth carrying around what is
essentially dead code.
The implementation is fairly straightforward, with one
exception: there is exactly one caller (git.c) that actually
cares about the result of the function, and not the
side-effect of setting up argv0_path. We can accommodate
that by simply replacing the value of argv[0] in the array
we hand down to cmd_main().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are certain startup tasks that we expect every git
process to do. In some cases this is just to improve the
quality of the program (e.g., setting up gettext()). In
others it is a requirement for using certain functions in
libgit.a (e.g., system_path() expects that you have called
git_extract_argv0_path()).
Most commands are builtins and are covered by the git.c
version of main(). However, there are still a few external
commands that use their own main(). Each of these has to
remember to include the correct startup sequence, and we are
not always consistent.
Rather than just fix the inconsistencies, let's make this
harder to get wrong by providing a common main() that can
run this standard startup.
We basically have two options to do this:
- the compat/mingw.h file already does something like this by
adding a #define that replaces the definition of main with a
wrapper that calls mingw_startup().
The upside is that the code in each program doesn't need
to be changed at all; it's rewritten on the fly by the
preprocessor.
The downside is that it may make debugging of the startup
sequence a bit more confusing, as the preprocessor is
quietly inserting new code.
- the builtin functions are all of the form cmd_foo(),
and git.c's main() calls them.
This is much more explicit, which may make things more
obvious to somebody reading the code. It's also more
flexible (because of course we have to figure out _which_
cmd_foo() to call).
The downside is that each of the builtins must define
cmd_foo(), instead of just main().
This patch chooses the latter option, preferring the more
explicit approach, even though it is more invasive. We
introduce a new file common-main.c, with the "real" main. It
expects to call cmd_main() from whatever other objects it is
linked against.
We link common-main.o against anything that links against
libgit.a, since we know that such programs will need to do
this setup. Note that common-main.o can't actually go inside
libgit.a, as the linker would not pick up its main()
function automatically (it has no callers).
The rest of the patch is just adjusting all of the various
external programs (mostly in t/helper) to use cmd_main().
I've provided a global declaration for cmd_main(), which
means that all of the programs also need to match its
signature. In particular, many functions need to switch to
"const char **" instead of "char **" for argv. This effect
ripples out to a few other variables and functions, as well.
This makes the patch even more invasive, but the end result
is much better. We should be treating argv strings as const
anyway, and now all programs conform to the same signature
(which also matches the way builtins are defined).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fast-import" learned the same performance trick to avoid
creating too small a packfile as "git fetch" and "git push" have,
using *.unpackLimit configuration.
* ew/fast-import-unpack-limit:
fast-import: invalidate pack_id references after loosening
fast-import: implement unpack limit
|
|
"git fast-import --export-marks" would overwrite the existing marks
file even when it makes a dump from its custom die routine.
Prevent it from doing so when we have an import-marks file but
haven't finished reading it.
* fc/fast-import-broken-marks-file:
fast-import: do not truncate exported marks file
|
|
When loosening a pack, the current pack_id gets reused when
checkpointing and the import does not terminate. This causes
problems after checkpointing as the object table, branch, and
tag lists still contains pre-checkpoint references to the
recycled pack_id.
Merely clearing the object_table as suggested by Jeff King in
http://mid.gmane.org/20160517121330.GA7346@sigill.intra.peff.net
is insufficient as the marks set still contains references
to object entries.
Wrong pack_id references branch and tags lists do not cause
errors, but can lead to misleading crash reports and core dumps,
so they are also invalidated.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The experimental "multiple worktree" feature gains more safety to
forbid operations on a branch that is checked out or being actively
worked on elsewhere, by noticing that e.g. it is being rebased.
* nd/worktree-various-heads:
branch: do not rename a branch under bisect or rebase
worktree.c: check whether branch is bisected in another worktree
wt-status.c: split bisect detection out of wt_status_get_state()
worktree.c: check whether branch is rebased in another worktree
worktree.c: avoid referencing to worktrees[i] multiple times
wt-status.c: make wt_status_check_rebase() work on any worktree
wt-status.c: split rebase detection out of wt_status_get_state()
path.c: refactor and add worktree_git_path()
worktree.c: mark current worktree
worktree.c: make find_shared_symref() return struct worktree *
worktree.c: store "id" instead of "git_dir"
path.c: add git_common_path() and strbuf_git_common_path()
dir.c: rename str(n)cmp_icase to fspath(n)cmp
|
|
Certain lines of the marks file might be corrupted (or the objects
missing due to a garbage collection), but that's no reason to truncate
the file and essentially destroy the rest of it.
Ideally missing objects should not cause a crash, we could just skip
them, but that's another patch.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With many incremental imports, small packs become highly
inefficient due to the need to readdir scan and load many
indices to locate even a single object. Frequent repacking and
consolidation may be prohibitively expensive in terms of disk
I/O, especially in large repositories where the initial packs
were aggressively optimized and marked with .keep files.
In those cases, users may be better served with loose objects
and relying on "git gc --auto".
This changes the default behavior of fast-import for small
imports found in test cases, so adjustments to t9300 were
necessary.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These functions compare two paths that are taken from file system.
Depending on the running file system, paths may need to be compared
case-sensitively or not, and maybe even something else in future. The
current names do not convey that well.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|