summaryrefslogtreecommitdiff
path: root/environment.c
AgeCommit message (Collapse)AuthorFilesLines
2012-07-08git on Mac OS and precomposed unicodeLibravatar Torsten Bögershausen1-0/+1
Mac OS X mangles file names containing unicode on file systems HFS+, VFAT or SAMBA. When a file using unicode code points outside ASCII is created on a HFS+ drive, the file name is converted into decomposed unicode and written to disk. No conversion is done if the file name is already decomposed unicode. Calling open("\xc3\x84", ...) with a precomposed "Ä" yields the same result as open("\x41\xcc\x88",...) with a decomposed "Ä". As a consequence, readdir() returns the file names in decomposed unicode, even if the user expects precomposed unicode. Unlike on HFS+, Mac OS X stores files on a VFAT drive (e.g. an USB drive) in precomposed unicode, but readdir() still returns file names in decomposed unicode. When a git repository is stored on a network share using SAMBA, file names are send over the wire and written to disk on the remote system in precomposed unicode, but Mac OS X readdir() returns decomposed unicode to be compatible with its behaviour on HFS+ and VFAT. The unicode decomposition causes many problems: - The names "git add" and other commands get from the end user may often be precomposed form (the decomposed form is not easily input from the keyboard), but when the commands read from the filesystem to see what it is going to update the index with already is on the filesystem, readdir() will give decomposed form, which is different. - Similarly "git log", "git mv" and all other commands that need to compare pathnames found on the command line (often but not always precomposed form; a command line input resulting from globbing may be in decomposed) with pathnames found in the tree objects (should be precomposed form to be compatible with other systems and for consistency in general). - The same for names stored in the index, which should be precomposed, that may need to be compared with the names read from readdir(). NFS mounted from Linux is fully transparent and does not suffer from the above. As Mac OS X treats precomposed and decomposed file names as equal, we can - wrap readdir() on Mac OS X to return the precomposed form, and - normalize decomposed form given from the command line also to the precomposed form, to ensure that all pathnames used in Git are always in the precomposed form. This behaviour can be requested by setting "core.precomposedunicode" configuration variable to true. The code in compat/precomposed_utf8.c implements basically 4 new functions: precomposed_utf8_opendir(), precomposed_utf8_readdir(), precomposed_utf8_closedir() and precompose_argv(). The first three are to wrap opendir(3), readdir(3), and closedir(3) functions. The argv[] conversion allows to use the TAB filename completion done by the shell on command line. It tolerates other tools which use readdir() to feed decomposed file names into git. When creating a new git repository with "git init" or "git clone", "core.precomposedunicode" will be set "false". The user needs to activate this feature manually. She typically sets core.precomposedunicode to "true" on HFS and VFAT, or file systems mounted via SAMBA. Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-22move git_default_* variables to ident.cLibravatar Jeff King1-3/+0
There's no reason anybody outside of ident.c should access these directly (they should use the new accessors which make sure the variables are initialized), so we can make them file-scope statics. While we're at it, move user_ident_explicitly_given into ident.c; while still globally visible, it makes more sense to reside with the ident code. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-19push: Provide situational hints for non-fast-forward errorsLibravatar Christopher Tiwald1-1/+1
Pushing a non-fast-forward update to a remote repository will result in an error, but the hint text doesn't provide the correct resolution in every case. Give better resolution advice in three push scenarios: 1) If you push your current branch and it triggers a non-fast-forward error, you should merge remote changes with 'git pull' before pushing again. 2) If you push to a shared repository others push to, and your local tracking branches are not kept up to date, the 'matching refs' default will generate non-fast-forward errors on outdated branches. If this is your workflow, the 'matching refs' default is not for you. Consider setting the 'push.default' configuration variable to 'current' or 'upstream' to ensure only your current branch is pushed. 3) If you explicitly specify a ref that is not your current branch or push matching branches with ':', you will generate a non-fast-forward error if any pushed branch tip is out of date. You should checkout the offending branch and merge remote changes before pushing again. Teach transport.c to recognize these scenarios and configure push.c to hint for them. If 'git push's default behavior changes or we discover more scenarios, extension is easy. Standardize on the advice API and add three new advice variables, 'pushNonFFCurrent', 'pushNonFFDefault', and 'pushNonFFMatching'. Setting any of these to 'false' will disable their affiliated advice. Setting 'pushNonFastForward' to false will disable all three, thus preserving the config option for users who already set it, but guaranteeing new users won't disable push advice accidentally. Based-on-patch-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Christopher Tiwald <christiwald@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-16Merge branch 'jc/stream-to-pack'Libravatar Junio C Hamano1-0/+1
* jc/stream-to-pack: bulk-checkin: replace fast-import based implementation csum-file: introduce sha1file_checkpoint finish_tmp_packfile(): a helper function create_tmp_packfile(): a helper function write_pack_header(): a helper function Conflicts: pack.h
2011-12-09Merge branch 'jc/request-pull-show-head-4'Libravatar Junio C Hamano1-0/+2
* jc/request-pull-show-head-4: request-pull: use the annotated tag contents fmt-merge-msg.c: Fix an "dubious one-bit signed bitfield" sparse error environment.c: Fix an sparse "symbol not declared" warning builtin/log.c: Fix an "Using plain integer as NULL pointer" warning fmt-merge-msg: use branch.$name.description request-pull: use the branch description request-pull: state what commit to expect request-pull: modernize style branch: teach --edit-description option format-patch: use branch description in cover letter branch: add read_branch_desc() helper function Conflicts: builtin/branch.c
2011-12-01bulk-checkin: replace fast-import based implementationLibravatar Junio C Hamano1-0/+1
This extends the earlier approach to stream a large file directly from the filesystem to its own packfile, and allows "git add" to send large files directly into a single pack. Older code used to spawn fast-import, but the new bulk-checkin API replaces it. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-17Merge branch 'bc/attr-ignore-case'Libravatar Junio C Hamano1-0/+1
* bc/attr-ignore-case: attr.c: respect core.ignorecase when matching attribute patterns attr: read core.attributesfile from git_default_core_config builtin/mv.c: plug miniscule memory leak cleanup: use internal memory allocation wrapper functions everywhere attr.c: avoid inappropriate access to strbuf "buf" member Conflicts: transport-helper.c
2011-10-09environment.c: Fix an sparse "symbol not declared" warningLibravatar Ramsay Jones1-0/+1
In particular, sparse issues the following warning: environment.c:62:5: warning: symbol 'merge_log_config' was not \ declared. Should it be static? In order to supress the warning, we include the "fmt-merge-msg.h" header file, since it contains an appropriate extern declaration for the 'merge_log_config' variable. Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-07fmt-merge-msg: use branch.$name.descriptionLibravatar Junio C Hamano1-0/+1
This teaches "merge --log" and fmt-merge-msg to use branch description information when merging a local topic branch into the mainline. The description goes between the branch name label and the list of commit titles. The refactoring to share the common configuration parsing between merge and fmt-merge-msg needs to be made into a separate patch. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-06attr: read core.attributesfile from git_default_core_configLibravatar Junio C Hamano1-0/+1
This code calls git_config from a helper function to parse the config entry it is interested in. Calling git_config in this way may cause a problem if the helper function can be called after a previous call to git_config by another function since the second call to git_config may reset some variable to the value in the config file which was previously overridden. The above is not a problem in this case since the function passed to git_config only parses one config entry and the variable it sets is not assigned outside of the parsing function. But a programmer who desires all of the standard config options to be parsed may be tempted to modify git_attr_config() so that it falls back to git_default_config() and then it _would_ be vulnerable to the above described behavior. So, move the call to git_config up into the top-level cmd_* function and move the responsibility for parsing core.attributesfile into the main config file parser. Which is only the logical thing to do ;-) Signed-off-by: Brandon Casey <drafnel@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-05Change check_ref_format() to take a flags argumentLibravatar Michael Haggerty1-1/+1
Change check_ref_format() to take a flags argument that indicates what is acceptable in the reference name (analogous to "git check-ref-format"'s "--allow-onelevel" and "--refspec-pattern"). This is more convenient for callers and also fixes a failure in the test suite (and likely elsewhere in the code) by enabling "onelevel" and "refspec-pattern" to be allowed independently of each other. Also rename check_ref_format() to check_refname_format() to make it obvious that it deals with refnames rather than references themselves. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-28Merge branch 'nd/maint-clone-gitdir'Libravatar Junio C Hamano1-1/+1
* nd/maint-clone-gitdir: clone: allow to clone from .git file read_gitfile_gently(): rename misnamed function to read_gitfile()
2011-08-22read_gitfile_gently(): rename misnamed function to read_gitfile()Libravatar Junio C Hamano1-1/+1
The function was not gentle at all to the callers and died without giving them a chance to deal with possible errors. Rename it to read_gitfile(), and update all the callers. As no existing caller needs a true "gently" variant, we do not bother adding one at this point. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-17Merge branch 'js/ref-namespaces'Libravatar Junio C Hamano1-0/+41
* js/ref-namespaces: ref namespaces: tests ref namespaces: documentation ref namespaces: Support remote repositories via upload-pack and receive-pack ref namespaces: infrastructure Fix prefix handling in ref iteration functions
2011-07-06core: log offset pack data accesses happenedLibravatar Junio C Hamano1-0/+1
In a workload other than "git log" (without pathspec nor any option that causes us to inspect trees and blobs), the recency pack order is said to cause the access jump around quite a bit. Add a hook to allow us observe how bad it is. "git config core.logpackaccess /var/tmp/pal.txt" will give you the log in the specified file. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-07-06ref namespaces: infrastructureLibravatar Josh Triplett1-0/+41
Add support for dividing the refs of a single repository into multiple namespaces, each of which can have its own branches, tags, and HEAD. Git can expose each namespace as an independent repository to pull from and push to, while sharing the object store, and exposing all the refs to operations such as git-gc. Storing multiple repositories as namespaces of a single repository avoids storing duplicate copies of the same objects, such as when storing multiple branches of the same source. The alternates mechanism provides similar support for avoiding duplicates, but alternates do not prevent duplication between new objects added to the repositories without ongoing maintenance, while namespaces do. To specify a namespace, set the GIT_NAMESPACE environment variable to the namespace. For each ref namespace, git stores the corresponding refs in a directory under refs/namespaces/. For example, GIT_NAMESPACE=foo will store refs under refs/namespaces/foo/. You can also specify namespaces via the --namespace option to git. Note that namespaces which include a / will expand to a hierarchy of namespaces; for example, GIT_NAMESPACE=foo/bar will store refs under refs/namespaces/foo/refs/namespaces/bar/. This makes paths in GIT_NAMESPACE behave hierarchically, so that cloning with GIT_NAMESPACE=foo/bar produces the same result as cloning with GIT_NAMESPACE=foo and cloning from that repo with GIT_NAMESPACE=bar. It also avoids ambiguity with strange namespace paths such as foo/refs/heads/, which could otherwise generate directory/file conflicts within the refs directory. Add the infrastructure for ref namespaces: handle the GIT_NAMESPACE environment variable and --namespace option, and support iterating over refs in a namespace. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Jamey Sharp <jamey@minilop.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-19Merge branch 'jc/replacing'Libravatar Junio C Hamano1-1/+1
* jc/replacing: read_sha1_file(): allow selective bypassing of replacement mechanism inline lookup_replace_object() calls read_sha1_file(): get rid of read_sha1_file_repl() madness t6050: make sure we test not just commit replacement Declare lookup_replace_object() in cache.h, not in commit.h Conflicts: environment.c
2011-05-15inline lookup_replace_object() callsLibravatar Junio C Hamano1-1/+1
In a repository without object replacement, lookup_replace_object() should be a no-op. Check the flag "read_replace_refs" on the side of the caller, and bypess a function call when we know we are not dealing with replacement. Also, even when we are set up to replace objects, if we do not find any replacement defined, flip that flag off to avoid function call overhead for all the later object accesses. As this change the semantics of the flag from "do we need read the replacement definition?" to "do we need to check with the lookup table?" the flag needs to be renamed later to something saner, e.g. "use_replace", when the codebase is calmer, but not now. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-09convert: rename the "eol" global variable to "core_eol"Libravatar Junio C Hamano1-1/+1
Yes, it is clear that "eol" wants to mean some sort of end-of-line thing, but as the name of a global variable, it is way too short to describe what kind of end-of-line thing it wants to represent. Besides, there are many codepaths that want to use their own local "char *eol" variable to point at the end of the current line they are processing. This global variable holds what we read from core.eol configuration variable. Name it as such. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-27Merge branch 'jc/pack-objects-bigfile'Libravatar Junio C Hamano1-0/+1
* jc/pack-objects-bigfile: Teach core.bigfilethreashold to pack-objects
2011-04-05Teach core.bigfilethreashold to pack-objectsLibravatar Junio C Hamano1-0/+1
The pack-objects command should take notice of the object file and refrain from attempting to delta large ones, to be consistent with the fast-import command. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-23Merge branch 'lt/default-abbrev'Libravatar Junio C Hamano1-0/+1
* lt/default-abbrev: Rename core.abbrevlength back to core.abbrev Make the default abbrev length configurable
2011-03-17Name make_*_path functions more accuratelyLibravatar Carlos Martín Nieto1-2/+2
Rename the make_*_path functions so it's clearer what they do, in particlar make clear what the differnce between make_absolute_path and make_nonrelative_path is by renaming them real_path and absolute_path respectively. make_relative_path has an understandable name and is renamed to relative_path to maintain the name convention. The function calls have been replaced 1-to-1 in their usage. Signed-off-by: Carlos Martín Nieto <cmn@elego.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-11Make the default abbrev length configurableLibravatar Linus Torvalds1-0/+1
The default of 7 comes from fairly early in git development, when seven hex digits was a lot (it covers about 250+ million hash values). Back then I thought that 65k revisions was a lot (it was what we were about to hit in BK), and each revision tends to be about 5-10 new objects or so, so a million objects was a big number. These days, the kernel isn't even the largest git project, and even the kernel has about 220k revisions (_much_ bigger than the BK tree ever was) and we are approaching two million objects. At that point, seven hex digits is still unique for a lot of them, but when we're talking about just two orders of magnitude difference between number of objects and the hash size, there _will_ be collisions in truncated hash values. It's no longer even close to unrealistic - it happens all the time. We should both increase the default abbrev that was unrealistically small, _and_ add a way for people to set their own default per-project in the git config file. This is the first step to first make it configurable; the default of 7 is not raised yet. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-10Revert "core.abbrevguard: Ensure short object names stay unique a bit longer"Libravatar Junio C Hamano1-1/+0
This reverts commit 72a5b561fc1c4286bc7c5b0693afc076af261e1f, as adding fixed number of hexdigits more than necessary to make one object name locally unique does not help in futureproofing the uniqueness of names we generate today. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-28Merge branch 'nd/setup'Libravatar Junio C Hamano1-18/+8
* nd/setup: (47 commits) setup_work_tree: adjust relative $GIT_WORK_TREE after moving cwd git.txt: correct where --work-tree path is relative to Revert "Documentation: always respect core.worktree if set" t0001: test git init when run via an alias Remove all logic from get_git_work_tree() setup: rework setup_explicit_git_dir() setup: clean up setup_discovered_git_dir() t1020-subdirectory: test alias expansion in a subdirectory setup: clean up setup_bare_git_dir() setup: limit get_git_work_tree()'s to explicit setup case only Use git_config_early() instead of git_config() during repo setup Add git_config_early() git-rev-parse.txt: clarify --git-dir t1510: setup case #31 t1510: setup case #30 t1510: setup case #29 t1510: setup case #28 t1510: setup case #27 t1510: setup case #26 t1510: setup case #25 ...
2010-12-22Remove all logic from get_git_work_tree()Libravatar Nguyễn Thái Ngọc Duy1-24/+8
This logic is now only used by cmd_init_db(). setup_* functions do not rely on it any more. Move all the logic to cmd_init_db() and turn get_git_work_tree() into a simple function. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-22setup: limit get_git_work_tree()'s to explicit setup case onlyLibravatar Nguyễn Thái Ngọc Duy1-2/+8
get_git_work_tree() takes input as core.worktree, core.bare, GIT_WORK_TREE and decides correct worktree setting. Unfortunately it does not do its job well. core.worktree and GIT_WORK_TREE should only be taken into account, if GIT_DIR is set (which is handled by setup_explicit_git_dir). For other setup cases, only core.bare matters. Add a temporary variable setup_explicit to adjust get_git_work_tree() behavior as such. This variable will be gone once setup_* rework is done. Also remove is_bare_repository_cfg check in set_git_work_tree() to ease the rework. We are going to check for core.bare and core.worktree early before setting worktree. For example, if core.bare is true, no need to set worktree. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-08Merge branch 'ks/maint-getenv-fix'Libravatar Junio C Hamano1-0/+1
* ks/maint-getenv-fix: setup: make sure git_dir path is in a permanent buffer, getenv(3) case
2010-12-03Merge branch 'jn/thinner-wrapper'Libravatar Junio C Hamano1-0/+37
* jn/thinner-wrapper: Remove pack file handling dependency from wrapper.o pack-objects: mark file-local variable static wrapper: give zlib wrappers their own translation unit strbuf: move strbuf_branchname to sha1_name.c path helpers: move git_mkstemp* to wrapper.c wrapper: move odb_* to environment.c wrapper: move xmmap() to sha1_file.c
2010-12-03Merge branch 'pn/commit-autosquash'Libravatar Junio C Hamano1-0/+11
* pn/commit-autosquash: add tests of commit --squash commit: --squash option for use with rebase --autosquash add tests of commit --fixup commit: --fixup option for use with rebase --autosquash pretty.c: teach format_commit_message() to reencode the output commit: helper methods to reduce redundant blocks of code Conflicts: Documentation/git-commit.txt t/t3415-rebase-autosquash.sh
2010-11-12setup: make sure git_dir path is in a permanent buffer, getenv(3) caseLibravatar Kirill Smelkov1-0/+1
getenv(3) returns not-permanent buffer which may be changed by e.g. putenv(3) call (*). In practice I've noticed this when trying to do `git commit -m abc` inside msysgit under wine, getting $ git commit -m abc fatal: could not open 'DIR=.git/COMMIT_EDITMSG': No such file or directory ^^^^ (notice introduced 'DIR=' artifact.) The problem was showing itself only with -m option, and actually, as debugging showed, originally git_dir = getenv("GIT_DIR") returned pointer to "GIT_DIR=.git\0" ^ git_dir , we stored it in git_dir, than, after processing -m git-commit option, we did setenv("GIT_EDITOR", ":") which as (*) says changed environment variables memory layout - something like this "...\0GIT_DIR=.git\0" ^ git_dir and oops - we got wrong git_dir. Avoid that by strdupping getenv("GIT_DIR") result like we did in 06f354 (setup: make sure git dir path is in a permanent buffer). Unfortunately this also shows that other getenv usage inside git needs auditing... (*) from man 3 getenv: The implementation of getenv() is not required to be reentrant. The string pointed to by the return value of getenv() may be statically allocated, and can be modified by a subsequent call to getenv(), putenv(3), setenv(3), or unsetenv(3). Cc: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-10wrapper: move odb_* to environment.cLibravatar Jonathan Nieder1-0/+37
The odb_mkstemp and odb_pack_keep functions open files under the $GIT_OBJECT_DIRECTORY directory. This requires access to the git configuration which very simple programs do not need. Move these functions to environment.o, closer to their dependencies. This should make it easier for programs to link to wrapper.o without linking to environment.o. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-04commit: helper methods to reduce redundant blocks of codeLibravatar Pat Notz1-0/+11
* builtin/commit.c: Replace block of code with a one-liner call to logmsg_reencode(). * commit.c: new function for looking up a comit by name * pretty.c: helper methods for getting output encodings Add helpers get_log_output_encoding() and get_commit_output_encoding() that eliminate some messy and duplicate if-blocks. Signed-off-by: Pat Notz <patnotz@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-28core.abbrevguard: Ensure short object names stay unique a bit longerLibravatar Junio C Hamano1-0/+1
Even though git makes sure that it uses enough hexdigits to show an abbreviated object name unambiguously, as more objects are added to the repository over time, a short name that used to be unique will stop being unique. Git uses this many extra hexdigits that are more than necessary to make the object name currently unique, in the hope that its output will stay unique a bit longer. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-03setup: make sure git dir path is in a permanent bufferLibravatar Jonathan Nieder1-1/+3
If setup_git_env() is run before the usual repository discovery sequence and .git is a file with the text gitdir: <path> (with <path> any string) then the in-core git_dir variable is set to the result of converting <path> to an absolute path using make_absolute_path(). Unfortunately make_absolute_path() returns its result in a static buffer that is overwritten by later calls. Such a call could cause later accesses to git_dir (from git_pathdup(), for example) to read the wrong path, leaving git very confused. It is not obvious whether any existing code in git will trigger the problem, but in any case, it is worth a few dozen bytes to copy the return value from make_absolute_path() for some added peace of mind. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-03environment.c: remove unused variableLibravatar Jonathan Nieder1-3/+1
After v1.6.0-rc0~230^2^ (environment.c: remove unused function, 2008-06-19), git_refs_dir is not used any more. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-09-08Merge branch 'kf/askpass-config'Libravatar Junio C Hamano1-0/+1
* kf/askpass-config: Extend documentation of core.askpass and GIT_ASKPASS. Allow core.askpass to override SSH_ASKPASS. Add a new option 'core.askpass'.
2010-09-08Merge branch 'jk/maint-pass-c-config-in-env'Libravatar Junio C Hamano1-0/+1
* jk/maint-pass-c-config-in-env: do not pass "git -c foo=bar" params to transport helpers pass "git -c foo=bar" params through environment
2010-08-31Add a new option 'core.askpass'.Libravatar Anselm Kruis1-0/+1
Setting this option has the same effect as setting the environment variable 'GIT_ASKPASS'. Signed-off-by: Knut Franke <k.franke@science-computing.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-24do not pass "git -c foo=bar" params to transport helpersLibravatar Jonathan Nieder1-0/+1
Like $GIT_CONFIG, $GIT_CONFIG_PARAMETERS needs to be suppressed by "git push" and its cousins when running local transport helpers to imitate remote transport well. Noticed-by: Jeff King <peff@peff.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-11git wrapper: introduce startup_info structLibravatar Nguyễn Thái Ngọc Duy1-0/+1
The startup_info struct will collect information managed by the git setup code, such as the prefix for relative paths passed on the command line (i.e., path to the starting cwd from the toplevel of the work tree) and whether a git repository has been found. In other words, startup_info is intended to be a collection of global variables with results that were previously returned from setup functions. This state is global anyway (since the cwd is), even if it is not currently tracked that way. Letting these values persist means there is more flexibility in deciding when to run setup. For now, the struct is empty. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-21Merge branch 'eb/core-eol'Libravatar Junio C Hamano1-1/+2
* eb/core-eol: Add "core.eol" config variable Rename the "crlf" attribute "text" Add per-repository eol normalization Add tests for per-repository eol normalization Conflicts: Documentation/config.txt Makefile
2010-06-06Add "core.eol" config variableLibravatar Eyvind Bernhardsen1-0/+1
Introduce a new configuration variable, "core.eol", that allows the user to set which line endings to use for end-of-line-normalized files in the working directory. It defaults to "native", which means CRLF on Windows and LF everywhere else. Note that "core.autocrlf" overrides core.eol. This means that [core] autocrlf = true puts CRLFs in the working directory even if core.eol is set to "lf". Signed-off-by: Eyvind Bernhardsen <eyvind.bernhardsen@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-19Add per-repository eol normalizationLibravatar Eyvind Bernhardsen1-1/+1
Change the semantics of the "crlf" attribute so that it enables end-of-line normalization when it is set, regardless of "core.autocrlf". Add a new setting for "crlf": "auto", which enables end-of-line conversion but does not override the automatic text file detection. Add a new attribute "eol" with possible values "crlf" and "lf". When set, this attribute enables normalization and forces git to use CRLF or LF line endings in the working directory, respectively. The line ending style to be used for normalized text files in the working directory is set using "core.autocrlf". When it is set to "true", CRLFs are used in the working directory; when set to "input" or "false", LFs are used. Signed-off-by: Eyvind Bernhardsen <eyvind.bernhardsen@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-24Refactor list of of repo-local env varsLibravatar Giuseppe Bilotta1-0/+17
Move the list of GIT_* environment variables that are local to a repository into a static list in environment.c, as it is also useful elsewhere. Also add the missing GIT_CONFIG variable to the list. Make it easy to use the list both by NULL-termination and by size; the latter (excluding the terminating NULL) is stored in the local_repo_env_size define. Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-13Merge branch 'nd/sparse'Libravatar Junio C Hamano1-0/+1
* nd/sparse: (25 commits) t7002: test for not using external grep on skip-worktree paths t7002: set test prerequisite "external-grep" if supported grep: do not do external grep on skip-worktree entries commit: correctly respect skip-worktree bit ie_match_stat(): do not ignore skip-worktree bit with CE_MATCH_IGNORE_VALID tests: rename duplicate t1009 sparse checkout: inhibit empty worktree Add tests for sparse checkout read-tree: add --no-sparse-checkout to disable sparse checkout support unpack-trees(): ignore worktree check outside checkout area unpack_trees(): apply $GIT_DIR/info/sparse-checkout to the final index unpack-trees(): "enable" sparse checkout and load $GIT_DIR/info/sparse-checkout unpack-trees.c: generalize verify_* functions unpack-trees(): add CE_WT_REMOVE to remove on worktree alone Introduce "sparse checkout" dir.c: export excluded_1() and add_excludes_from_file_1() excluded_1(): support exclude files in index unpack-trees(): carry skip-worktree bit over in merged_entry() Read .gitignore from index if it is skip-worktree Avoid writing to buffer in add_excludes_from_file_1() ... Conflicts: .gitignore Documentation/config.txt Documentation/git-update-index.txt Makefile entry.c t/t7002-grep.sh
2009-11-23Merge branch 'cc/replace'Libravatar Junio C Hamano1-0/+2
* cc/replace: Documentation: talk a little bit about GIT_NO_REPLACE_OBJECTS Documentation: fix typos and spelling in replace documentation replace: use a GIT_NO_REPLACE_OBJECTS env variable
2009-11-20replace: use a GIT_NO_REPLACE_OBJECTS env variableLibravatar Christian Couder1-0/+2
This has the same effect as --no-replace-objects option; git ignores the replace refs. When --no-replace-objects option is passed to git, this environment variable is set to "1" and exported to subprocesses in order to propagate the same setting. It is useful for example for scripts, as the git commands used in them can now be aware that they must not read replace refs. Tested-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-19Introduce commit notesLibravatar Johannes Schindelin1-0/+1
Commit notes are blobs which are shown together with the commit message. These blobs are taken from the notes ref, which you can configure by the config variable core.notesRef, which in turn can be overridden by the environment variable GIT_NOTES_REF. The notes ref is a branch which contains "files" whose names are the names of the corresponding commits (i.e. the SHA-1). The rationale for putting this information into a ref is this: we want to be able to fetch and possibly union-merge the notes, maybe even look at the date when a note was introduced, and we want to store them efficiently together with the other objects. This patch has been improved by the following contributions: - Thomas Rast: fix core.notesRef documentation - Tor Arne Vestbø: fix printing of multi-line notes - Alex Riesen: Using char array instead of char pointer costs less BSS - Johan Herland: Plug leak when msg is good, but msglen or type causes return Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Tor Arne Vestbø <tavestbo@trolltech.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com> get_commit_notes(): Plug memory leak when 'if' triggers, but not because of read_sha1_file() failure