| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The old version of work-tree support was an unholy mess, barely readable,
and not to the point.
For example, why do you have to provide a worktree, when it is not used?
As in "git status". Now it works.
Another riddle was: if you can have work trees inside the git dir, why
are some programs complaining that they need a work tree?
IOW it is allowed to call
$ git --git-dir=../ --work-tree=. bla
when you really want to. In this case, you are both in the git directory
and in the working tree. So, programs have to actually test for the right
thing, namely if they are inside a working tree, and not if they are
inside a git directory.
Also, GIT_DIR=../.git should behave the same as if no GIT_DIR was
specified, unless there is a repository in the current working directory.
It does now.
The logic to determine if a repository is bare, or has a work tree
(tertium non datur), is this:
--work-tree=bla overrides GIT_WORK_TREE, which overrides core.bare = true,
which overrides core.worktree, which overrides GIT_DIR/.. when GIT_DIR
ends in /.git, which overrides the directory in which .git/ was found.
In related news, a long standing bug was fixed: when in .git/bla/x.git/,
which is a bare repository, git formerly assumed ../.. to be the
appropriate git dir. This problem was reported by Shawn Pearce to have
caused much pain, where a colleague mistakenly ran "git init" in "/" a
long time ago, and bare repositories just would not work.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With the function set_git_dir() you can reset the path that will
be used for git_path(), git_dir() and friends.
The responsibility to close files and throw away information from the
old git_dir lies with the caller.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds a configuration variable that performs the same function as,
but is overridden by, GIT_PAGER.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Acked-by: Johannes E. Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We always quote "unusual" byte values in a pathname using
C-string style, to make it safer for parsing scripts that do not
handle NUL separated records well (or just too lazy to bother).
The absolute minimum bytes that need to be quoted for this
purpose are TAB, LF (and other control characters), double quote
and backslash.
However, we have also always quoted the bytes in high 8-bit
range; this was partly because we were lazy and partly because
we were being cautious.
This introduces an internal "quote_path_fully" variable, and
core.quotepath configuration variable to control it. When set
to false, it does not quote bytes in high 8-bit range anymore
but passes them intact.
The variable defaults to "true" to retain the traditional
behaviour for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* dh/pack:
Custom compression levels for objects and packs
|
|
Add config variables pack.compression and core.loosecompression ,
and switch --compression=level to pack-objects.
Loose objects will be compressed using core.loosecompression if set,
else core.compression if set, else Z_BEST_SPEED.
Packed objects will be compressed using --compression=level if seen,
else pack.compression if set, else core.compression if set,
else Z_DEFAULT_COMPRESSION. This is the "pack compression level".
Loose objects added to a pack undeltified will be recompressed
to the pack compression level if it is unequal to the current
loose compression level by the preceding rules, or if the loose
object was written while core.legacyheaders = true. Newly
deltified loose objects are always compressed to the current
pack compression level.
Previously packed objects added to a pack are recompressed
to the current pack compression level exactly when their
deltification status changes, since the previous pack data
cannot be reused.
In either case, the --no-reuse-object switch from the first
patch below will always force recompression to the current pack
compression level, instead of assuming the pack compression level
hasn't changed and pack data can be reused when possible.
This applies on top of the following patches from Nicolas Pitre:
[PATCH] allow for undeltified objects not to be reused
[PATCH] make "repack -f" imply "pack-objects --no-reuse-object"
Signed-off-by: Dana L. How <danahow@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Now that we encourage and actively preserve objects in a packed form
more agressively than we did at the time the new loose object format and
core.legacyheaders were introduced, that extra loose object format
doesn't appear to be worth it anymore.
Because the packing of loose objects has to go through the delta match
loop anyway, and since most of them should end up being deltified in
most cases, there is really little advantage to have this parallel loose
object format as the CPU savings it might provide is rather lost in the
noise in the end.
This patch gets rid of core.legacyheaders, preserve the legacy format as
the only writable loose object format and deprecate the other one to
keep things simpler.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The new configuration variable core.deltaBaseCacheLimit allows the
user to control how much memory they are willing to give to Git for
caching base objects of deltas. This is not normally meant to be
a user tweakable knob; the "out of the box" settings are meant to
be suitable for almost all workloads.
We default to 16 MiB under the assumption that the cache is not
meant to consume all of the user's available memory, and that the
cache's main purpose was to cache trees, for faster path limiters
during revision traversal. Since trees tend to be relatively small
objects, this relatively small limit should still allow a large
number of objects.
On the other hand we don't want the cache to start storing 200
different versions of a 200 MiB blob, as this could easily blow
the entire address space of a 32 bit process.
We evict OBJ_BLOB from the cache first (credit goes to Junio) as
we want to favor OBJ_TREE within the cache. These are the objects
that have the highest inflate() startup penalty, as they tend to
be small and thus don't have that much of a chance to ammortize
that penalty over the entire data.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The new builtin-revert code introduces a few new compiler errors
when I'm building with my stricter set of checks enabled in CFLAGS.
These all just stem from trying to store a constant string into
a non-const char*. Simple fix, make the variables const char*.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We shouldn't attempt to assign constant strings into char*, as the
string is not writable at runtime. Likewise we should always be
treating unsigned values as unsigned values, not as signed values.
Most of these are very straightforward. The only exception is the
(unnecessary) xstrdup/free in builtin-branch.c for the detached
head case. Since this is a user-level interactive type program
and that particular code path is executed no more than once, I feel
that the extra xstrdup call is well worth the easy elimination of
this warning.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Some file systems that can host git repositories and their working copies
do not support symbolic links. But then if the repository contains a symbolic
link, it is impossible to check out the working copy.
This patch enables partial support of symbolic links so that it is possible
to check out a working copy on such a file system. A new flag
core.symlinks (which is true by default) can be set to false to indicate
that the filesystem does not support symbolic links. In this case, symbolic
links that exist in the trees are checked out as small plain files, and
checking in modifications of these files preserve the symlink property in
the database (as long as an entry exists in the index).
Of course, this does not magically make symbolic links work on such defective
file systems; hence, this solution does not help if the working copy relies
on that an entry is a real symbolic link.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This allows you to do:
[core]
AutoCRLF = input
and it should do only the CRLF->LF translation (ie it simplifies CRLF only
when reading working tree files, but when checking out files, it leaves
the LF alone, and doesn't turn it into a CRLF).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
It currently does NOT know about file attributes, so it does its
conversion purely based on content. Maybe that is more in the "git
philosophy" anyway, since content is king, but I think we should try to do
the file attributes to turn it off on demand.
Anyway, BY DEFAULT it is off regardless, because it requires a
[core]
AutoCRLF = true
in your config file to be enabled. We could make that the default for
Windows, of course, the same way we do some other things (filemode etc).
But you can actually enable it on UNIX, and it will cause:
- "git update-index" will write blobs without CRLF
- "git diff" will diff working tree files without CRLF
- "git checkout" will write files to the working tree _with_ CRLF
and things work fine.
Funnily, it actually shows an odd file in git itself:
git clone -n git test-crlf
cd test-crlf
git config core.autocrlf true
git checkout
git diff
shows a diff for "Documentation/docbook-xsl.css". Why? Because we have
actually checked in that file *with* CRLF! So when "core.autocrlf" is
true, we'll always generate a *different* hash for it in the index,
because the index hash will be for the content _without_ CRLF.
Is this complete? I dunno. It seems to work for me. It doesn't use the
filename at all right now, and that's probably a deficiency (we could
certainly make the "is_binary()" heuristics also take standard filename
heuristics into account).
I don't pass in the filename at all for the "index_fd()" case
(git-update-index), so that would need to be passed around, but this
actually works fine.
NOTE NOTE NOTE! The "is_binary()" heuristics are totally made-up by yours
truly. I will not guarantee that they work at all reasonable. Caveat
emptor. But it _is_ simple, and it _is_ safe, since it's all off by
default.
The patch is pretty simple - the biggest part is the new "convert.c" file,
but even that is really just basic stuff that anybody can write in
"Teaching C 101" as a final project for their first class in programming.
Not to say that it's bug-free, of course - but at least we're not talking
about rocket surgery here.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This removes the old is_bare_git_dir(const char *) to ask if a
directory, if it is a GIT_DIR, is a bare repository, and
replaces it with is_bare_repository(void *). The function looks
at core.bare configuration variable if exists but uses the old
heuristics: if it is ".git" or ends with "/.git", then it does
not look like a bare repository, otherwise it does.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The patches to prevent Porcelainish that require working tree
from doing any damage in a bare repository make a lot of sense,
and I want to make the is_bare_git_dir() function more reliable.
In order to allow the repository owner override the heuristic
implemented in is_bare_git_dir() if/when it misidentifies a
particular repository, it would make sense to introduce a new
configuration variable "[core] bare = true/false", and make
is_bare_git_dir() notice it.
The scripts would do a 'repo-config --bool --get core.bare' and
iff the command fails (i.e. there is no such variable in the
configuration file), it would use the heuristic implemented at
the script level [*1*].
However, setup_git_env() which is called a lot earlier than we
even read from the repository configuration currently makes a
call to is_bare_git_dir(), in order to change the default
setting for log_all_ref_updates. It somehow feels that this is
a hack.
By the way, [*1*] is another thing I hate about the current
config mechanism. "git-repo-config --get" does not know what
the possible configuration variables are, let alone what the
default values for them are. It allows us not to maintain a
centralized configuration table, which makes it easy to
introduce ad-hoc variables and gives a warm fuzzy feeling of
being modular, but my feeling is that it is turning out to be a
rather high price to pay for scripts.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
If the compiler has asked us to disable use of mmap() on their
platform then we are forced to use git_mmap and its emulation via
pread. In this case large (e.g. 32 MiB) windows for pack access
are simply too big as a command will wind up reading a lot more
data than it will ever need, significantly reducing response time.
To prevent a high latency when NO_MMAP has been selected we now
use a default of 1 MiB for core.packedGitWindowSize. Credit goes
to Linus and Junio for recommending this more reasonable setting.
[jc: upcased the name of the symbolic constant, and made another
hardcoded constant into a symbolic constant while at it. ]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This finally turns on the sliding window behavior for packfile data
access by mapping limited size windows and chaining them under the
packed_git->windows list.
We consider a given byte offset to be within the window only if there
would be at least 20 bytes (one hash worth of data) accessible after
the requested offset. This range selection relates to the contract
that use_pack() makes with its callers, allowing them to access
one hash or one object header without needing to call use_pack()
for every byte of data obtained.
In the worst case scenario we will map the same page of data twice
into memory: once at the end of one window and once again at the
start of the next window. This duplicate page mapping will happen
only when an object header or a delta base reference is spanned
over the end of a window and is always limited to just one page of
duplication, as no sane operating system will ever have a page size
smaller than a hash.
I am assuming that the possible wasted page of virtual address
space is going to perform faster than the alternatives, which
would be to copy the object header or ref delta into a temporary
buffer prior to parsing, or to check the window range on every byte
during header parsing. We may decide to revisit this decision in
the future since this is just a gut instinct decision and has not
actually been proven out by experimental testing.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Rather than hardcoding the maximum number of bytes which can be
mmapped from pack files we should make this value configurable,
allowing the end user to increase or decrease this limit on a
per-repository basis depending on the size of the repository
and the capabilities of their operating system.
In general users should not need to manually tune such a low-level
setting within the core code, but being able to artifically limit
the number of bytes which we can mmap at once from pack files will
make it easier to craft test cases for the new mmap sliding window
implementation.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
It is plausible for somebody to want to view the commit log in a
different encoding from i18n.commitencoding -- the project's
policy may be UTF-8 and the user may be using a commit message
hook to run iconv to conform to that policy (and either not have
i18n.commitencoding to default to UTF-8 or have it explicitly
set to UTF-8). Even then, Latin-1 may be more convenient for
the usual pager and the terminal the user uses.
The new variable i18n.logoutputencoding is used in preference to
i18n.commitencoding to decide what encoding to recode the log
output in when git-log and friends formats the commit log message.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
New and experienced Git users alike are finding out too late that
they forgot to enable reflogs in the current repository, and cannot
use the information stored within it to recover from an incorrectly
entered command such as `git reset --hard HEAD^^^` when they really
meant HEAD^^ (aka HEAD~2).
So enable reflogs by default in all future versions of Git, unless
the user specifically disables it with:
[core]
logAllRefUpdates = false
in their .git/config or ~/.gitconfig.
We only enable reflogs in repositories that have a working directory
associated with them, as shared/bare repositories do not have
an easy means to prune away old log entries, or may fail logging
entirely if the user's gecos information is not valid during a push.
This heuristic was suggested on the mailing list by Junio.
Documentation was also updated to indicate the new default behavior.
We probably should start to teach usuing the reflog to recover
from mistakes in some of the tutorial material, as new users are
likely to make a few along the way and will feel better knowing
they can recover from them quickly and easily, without fsck-objects'
lost+found features.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The 'receive.denynonfastforwards' option has nothing to do with
the repository format version. Since receive-pack already uses
git_config to initialize itself before executing any updates we
can use the normal configuration strategy and isolate the receive
specific variables away from the core variables.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
If receive.denyNonFastforwards is set to true, git-receive-pack will deny
non fast-forwards, i.e. forced updates. Most notably, a push to a repository
which has that flag set will fail.
As a first user, 'git-init-db --shared' sets this flag, since in a shared
setup, you are most unlikely to want forced pushes to succeed.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Like xmalloc and xrealloc xstrdup dies with a useful message if
the native strdup() implementation returns NULL rather than a
valid pointer.
I just tried to use xstrdup in new code and found it to be missing.
However I expected it to be present as xmalloc and xrealloc are
already commonly used throughout the code.
[jc: removed the part that deals with last_XXX, which I am
finding more and more dubious these days.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
[jc: I needed to hand merge the changes to the updated codebase,
so the result needs to be checked.]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
enable/disable colored output when the pager is in use
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The pack-file format is slightly different from the traditional git
object format, in that it has a much denser binary header encoding.
The traditional format uses an ASCII string with type and length
information, which is somewhat wasteful.
A new object format starts with uncompressed binary header
followed by compressed payload -- this will allow us later to
copy the payload straight to packfiles.
Obviously they cannot be read by older versions of git, so for
now new object files are created with the traditional format.
core.legacyheaders configuration item, when set to false makes
the code write in new format for people to experiment with.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
On one of my systems, the linker is not intelligent enough to link with
pager.o (in libgit.a) when only the variable pager_in_use is needed. The
consequence is that the linker complains about an undefined variable. So,
put the variable into environment.o, where it is linked always.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
With the change in default, "git add ." on kernel dir is about
twice as fast as before, with only minimal (0.5%) change in
object size. The speed difference is even more noticeable
when committing large files, which is now up to 8 times faster.
The configurability is through setting core.compression = [-1..9]
which maps to the zlib constants; -1 is the default, 0 is no
compression, and 1..9 are various speed/size tradeoffs, 9
being slowest.
Signed-off-by: Joachim B Haga (cjhaga@fys.uio.no)
Acked-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This enhances core.sharedrepository to have additionally
specify that read and exec permissions to be given to others as
well. It is useful when serving a repository via gitweb and
git-daemon that runs as a user outside the project group.
The configuration item can take the following values:
[core]
sharedrepository ; the same as "group"
sharedrepository = true ; ditto
sharedrepository = 1 ; ditto
sharedrepository = group ; allow rwx to group
sharedrepository = all ; allow rwx to group, allow rx to other
sharedrepository = umask ; not shared - use umask
It also extends "git init-db" to take "--shared=all" and friends
from the command line.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
If config parameter core.logAllRefUpdates is true or the log
file already exists then append a line to ".git/logs/refs/<ref>"
whenever git-update-ref <ref> is executed. Each log line contains
the following information:
oldsha1 <SP> newsha1 <SP> committer <LF>
where committer is the current user, date, time and timezone in
the standard GIT ident format. If the caller is unable to append
to the log file then git-update-ref will fail without updating <ref>.
An optional message may be included in the log line with the -m flag.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When inspecting a project whose build infrastructure used to
assume that .git/HEAD is a symlink ref, core.prefersymlinkrefs
in the config file of such a project would help to bisect its
history.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
tag exists.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The new configuration option apply.whitespace can take one of
"warn", "error", "error-all", or "strip". When git-apply is run
to apply the patch to the index, they are used as the default
value if there is no command line --whitespace option.
Andrew can now tell people who feed him git trees to update to
this version and say:
git repo-config apply.whitespace error
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This adds "assume unchanged" logic, started by this message in the list
discussion recently:
<Pine.LNX.4.64.0601311807470.7301@g5.osdl.org>
This is a workaround for filesystems that do not have lstat()
that is quick enough for the index mechanism to take advantage
of. On the paths marked as "assumed to be unchanged", the user
needs to explicitly use update-index to register the object name
to be in the next commit.
You can use two new options to update-index to set and reset the
CE_VALID bit:
git-update-index --assume-unchanged path...
git-update-index --no-assume-unchanged path...
These forms manipulate only the CE_VALID bit; it does not change
the object name recorded in the index file. Nor they add a new
entry to the index.
When the configuration variable "core.ignorestat = true" is set,
the index entries are marked with CE_VALID bit automatically
after:
- update-index to explicitly register the current object name to the
index file.
- when update-index --refresh finds the path to be up-to-date.
- when tools like read-tree -u and apply --index update the working
tree file and register the current object name to the index file.
The flag is dropped upon read-tree that does not check out the index
entry. This happens regardless of the core.ignorestat settings.
Index entries marked with CE_VALID bit are assumed to be
unchanged most of the time. However, there are cases that
CE_VALID bit is ignored for the sake of safety and usability:
- while "git-read-tree -m" or git-apply need to make sure
that the paths involved in the merge do not have local
modifications. This sacrifices performance for safety.
- when git-checkout-index -f -q -u -a tries to see if it needs
to checkout the paths. Otherwise you can never check
anything out ;-).
- when git-update-index --really-refresh (a new flag) tries to
see if the index entry is up to date. You can start with
everything marked as CE_VALID and run this once to drop
CE_VALID bit for paths that are modified.
Most notably, "update-index --refresh" honours CE_VALID and does
not actively stat, so after you modified a file in the working
tree, update-index --refresh would not notice until you tell the
index about it with "git-update-index path" or "git-update-index
--no-assume-unchanged path".
This version is not expected to be perfect. I think diff
between index and/or tree and working files may need some
adjustment, and there probably needs other cases we should
automatically unmark paths that are marked to be CE_VALID.
But the basics seem to work, and ready to be tested by people
who asked for this feature.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
If the config variable 'core.sharedrepository' is set, the directories
$GIT_DIR/objects/
$GIT_DIR/objects/??
$GIT_DIR/objects/pack
$GIT_DIR/refs
$GIT_DIR/refs/heads
$GIT_DIR/refs/heads/tags
are set group writable (and g+s, since the git group may be not the primary
group of all users).
Since all files are written as lock files first, and then moved to
their destination, they do not have to be group writable. Indeed, if
this leads to problems you found a bug.
Note that -- as in my first attempt -- the config variable is set in the
function which checks the repository format. If this were done in
git_default_config instead, a lot of programs would need to be modified
to call git_config(git_default_config) first.
[jc: git variables should be in environment.c unless there is a
compelling reason to do otherwise.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This is to hold what the project-local rule as to the
charset/encoding for the commit log message is. Lack of it
defaults to utf-8.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This adds the repository format version code, first done by
Martin Atukunda.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This allows you to force git to avoid symlinks for refs. Just add
something like
[core]
symrefsonly = true
to .git/config.
Don´t forget to "git checkout your_branch", or it does not do anything...
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This starts using the "user.name" and "user.email" config variables if
they exist as the default name and email when committing. This means
that you don't have to use the GIT_COMMITTER_EMAIL environment variable
to override your email - you can just edit the config file instead.
The patch looks bigger than it is because it makes the default name and
email information non-static and renames it appropriately. And it moves
the common git environment variables into a new library file, so that
you can link against libgit.a and get the git environment without having
to link in zlib and libcrypt.
In short, most of it is renaming and moving, the real change core is
just a few new lines in "git_default_config()" that copies the user
config values to the new base.
It also changes "git-var -l" to list the config variables.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Johannes Schindelin
Brian Gernhardt
Junio C Hamano
Junio C Hamano
Dana How
Nicolas Pitre
Shawn O. Pearce
Johannes Sixt
Linus Torvalds
Pierre Habouzit
David Rientjes
Matthias Lederhofer
Linus Torvalds
Joachim B Haga