summaryrefslogtreecommitdiff
path: root/entry.c
AgeCommit message (Collapse)AuthorFilesLines
2016-05-09entry.c: use error_errno()Libravatar Nguyễn Thái Ngọc Duy1-6/+4
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-02-22use xmallocz to avoid size arithmeticLibravatar Jeff King1-1/+1
We frequently allocate strings as xmalloc(len + 1), where the extra 1 is for the NUL terminator. This can be done more simply with xmallocz, which also checks for integer overflow. There's no case where switching xmalloc(n+1) to xmallocz(n) is wrong; the result is the same length, and malloc made no guarantees about what was in the buffer anyway. But in some cases, we can stop manually placing NUL at the end of the allocated buffer. But that's only safe if it's clear that the contents will always fill the buffer. In each case where this patch does so, I manually examined the control flow, and I tried to err on the side of caution. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-25entry.c: convert strcpy to xsnprintfLibravatar Jeff King1-2/+2
This particular conversion is non-obvious, because nobody has passed our function the length of the destination buffer. However, the interface to checkout_entry specifies that the buffer must be at least TEMPORARY_FILENAME_LENGTH bytes long, so we can check that (meaning the existing code was not buggy, but merely worrisome to somebody reading it). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-13read-cache: mark updated entries for split indexLibravatar Nguyễn Thái Ngọc Duy1-0/+1
The large part of this patch just follows CE_ENTRY_CHANGED marks. replace_index_entry() is updated to update split_index->base->cache[] as well so base->cache[] does not reference to a freed entry. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-13entry.c: update cache_changed if refresh_cache is set in checkout_entry()Libravatar Nguyễn Thái Ngọc Duy1-0/+2
Other fill_stat_cache_info() is on new entries, which should set CE_ENTRY_ADDED in cache_changed, so we're safe. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-25Merge branch 'mh/remove-subtree-long-pathname-fix'Libravatar Junio C Hamano1-32/+32
* mh/remove-subtree-long-pathname-fix: entry.c: fix possible buffer overflow in remove_subtree() checkout_entry(): use the strbuf throughout the function
2014-03-13entry.c: fix possible buffer overflow in remove_subtree()Libravatar Michael Haggerty1-17/+17
remove_subtree() manipulated path in a fixed-size buffer even though the length of the input, let alone the length of entries within the directory, were not known in advance. Change the function to take a strbuf argument and use that object as its scratch space. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-13checkout_entry(): use the strbuf throughout the functionLibravatar Michael Haggerty1-16/+16
There is no need to break out the "buf" and "len" members into separate temporary variables. Rename path_buf to path and use path.buf and path.len directly. This makes it easier to reason about the data flow in the function. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-10-24checkout_entry(): clarify the use of topath[] parameterLibravatar Junio C Hamano1-0/+8
The said function has this signature: extern int checkout_entry(struct cache_entry *ce, const struct checkout *state, char *topath); At first glance, it might appear that the caller of checkout_entry() can specify to which path the contents are written out by the last parameter, and it is tempting to add "const" in front of its type. In reality, however, topath[] is to point at a buffer to store the temporary path generated by the callchain originating from this function, and the temporary path is always short, much shorter than the buffer prepared by its only caller in builtin/checkout-index.c. Document the code a bit to clarify so that future callers know how to use the function better. Noticed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-10-24entry.c: convert checkout_entry to use strbufLibravatar Nguyễn Thái Ngọc Duy1-5/+8
The old code does not do boundary check so any paths longer than PATH_MAX can cause buffer overflow. Replace it with strbuf to handle paths of arbitrary length. The OS may reject if the path is too long though. But in that case we report the cause (e.g. name too long) and usually move on to checking out the next entry. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-22Merge branch 'nd/const-struct-cache-entry'Libravatar Junio C Hamano1-5/+7
* nd/const-struct-cache-entry: Convert "struct cache_entry *" to "const ..." wherever possible
2013-07-18apply, entry: speak of submodules instead of subprojectsLibravatar Thomas Rast1-2/+2
There are only four (with some generous rounding) instances in the current source code where we speak of "subproject" instead of "submodule". They are as follows: * one error message in git-apply and two in entry.c * the patch format for submodule changes The latter was introduced in 0478675 (Expose subprojects as special files to "git diff" machinery, 2007-04-15), apparently before the terminology was settled. We can of course not change the patch format. Let's at least change the error messages to consistently call them "submodule". Signed-off-by: Thomas Rast <trast@inf.ethz.ch> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-09Convert "struct cache_entry *" to "const ..." wherever possibleLibravatar Nguyễn Thái Ngọc Duy1-5/+7
I attempted to make index_state->cache[] a "const struct cache_entry **" to find out how existing entries in index are modified and where. The question I have is what do we do if we really need to keep track of on-disk changes in the index. The result is - diff-lib.c: setting CE_UPTODATE - name-hash.c: setting CE_HASHED - preload-index.c, read-cache.c, unpack-trees.c and builtin/update-index: obvious - entry.c: write_entry() may refresh the checked out entry via fill_stat_cache_info(). This causes "non-const struct cache_entry *" in builtin/apply.c, builtin/checkout-index.c and builtin/checkout.c - builtin/ls-files.c: --with-tree changes stagemask and may set CE_UPDATE Of these, write_entry() and its call sites are probably most interesting because it modifies on-disk info. But this is stat info and can be retrieved via refresh, at least for porcelain commands. Other just uses ce_flags for local purposes. So, keeping track of "dirty" entries is just a matter of setting a flag in index modification functions exposed by read-cache.c. Except unpack-trees, the rest of the code base does not do anything funny behind read-cache's back. The actual patch is less valueable than the summary above. But if anyone wants to re-identify the above sites. Applying this patch, then this: diff --git a/cache.h b/cache.h index 430d021..1692891 100644 --- a/cache.h +++ b/cache.h @@ -267,7 +267,7 @@ static inline unsigned int canon_mode(unsigned int mode) #define cache_entry_size(len) (offsetof(struct cache_entry,name) + (len) + 1) struct index_state { - struct cache_entry **cache; + const struct cache_entry **cache; unsigned int version; unsigned int cache_nr, cache_alloc, cache_changed; struct string_list *resolve_undo; will help quickly identify them without bogus warnings. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-03Merge branch 'jk/check-corrupt-objects-carefully'Libravatar Junio C Hamano1-7/+9
Have the streaming interface and other codepaths more carefully examine for corrupt objects. * jk/check-corrupt-objects-carefully: clone: leave repo in place after checkout errors clone: run check_everything_connected clone: die on errors from unpack_trees add tests for cloning corrupted repositories streaming_write_entry: propagate streaming errors add test for streaming corrupt blobs avoid infinite loop in read_istream_loose read_istream_filtered: propagate read error from upstream check_sha1_signature: check return value from read_istream stream_blob_to_fd: detect errors reading from stream
2013-03-28Merge branch 'jk/checkout-attribute-lookup'Libravatar Junio C Hamano1-1/+1
Codepath to stream blob object contents directly from the object store to filesystem did not use the correct path to find conversion filters when writing to temporary files. * jk/checkout-attribute-lookup: t2003: work around path mangling issue on Windows entry: fix filter lookup t2003: modernize style
2013-03-27streaming_write_entry: propagate streaming errorsLibravatar Jeff King1-7/+9
When we are streaming an index blob to disk, we store the error from stream_blob_to_fd in the "result" variable, and then immediately overwrite that with the return value of "close". That means we catch errors on close (e.g., problems committing the file to disk), but miss anything which happened before then. We can fix this by using bitwise-OR to accumulate errors in our result variable. While we're here, we can also simplify the error handling with an early return, which makes it easier to see under which circumstances we need to clean up. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-14entry: fix filter lookupLibravatar John Keeping1-1/+1
When looking up the stream filter, write_entry() should be passing the path of the file in the repository, not the path to which the content is going to be written. This allows the file to be correctly looked up against the .gitattributes files in the working tree. This change makes the streaming case match the non-streaming case which passes ce->name to convert_to_working_tree later in the same function. The two tests added here test the different paths through write_entry since the CRLF filter is a streaming filter but the user-defined smudge filter is not streamed. Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-07streaming: make streaming-write-entry to be more reusableLibravatar Junio C Hamano1-48/+5
The static function in entry.c takes a cache entry and streams its blob contents to a file in the working tree. Refactor the logic to a new API function stream_blob_to_fd() that takes an object name and an open file descriptor, so that it can be reused by other callers. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-26Add streaming filter APILibravatar Junio C Hamano1-6/+10
This introduces an API to plug custom filters to an input stream. The caller gets get_stream_filter("path") to obtain an appropriate filter for the path, and then uses it when opening an input stream via open_istream(). After that, the caller can read from the stream with read_istream(), and close it with close_istream(), just like an unfiltered stream. This only adds a "null" filter that is a pass-thru filter, but later changes can add LF-to-CRLF and other filters, and the callers of the streaming API do not have to change. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-20streaming_write_entry(): support files with holesLibravatar Junio C Hamano1-2/+19
One typical use of a large binary file is to hold a sparse on-disk hash table with a lot of holes. Help preserving the holes with lseek(). Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-20streaming_write_entry(): use streaming API in write_entry()Libravatar Junio C Hamano1-0/+52
When the output to a path does not have to be converted, we can read from the object database from the streaming API and write to the file in the working tree, without having to hold everything in the memory. The ident, auto- and safe- crlf conversions inherently require you to read the whole thing before deciding what to do, so while it is technically possible to support them by using a buffer of an unbound size or rewinding and reading the stream twice, it is less practical than the traditional "read the whole thing in core and convert" approach. Adding streaming filters for the other conversions on top of this should be doable by tweaking the can_bypass_conversion() function (it should be renamed to can_filter_stream() when it happens). Then the streaming API can be extended to wrap the git_istream streaming_write_entry() opens on the underlying object in another git_istream that reads from it, filters what is read, and let the streaming_write_entry() read the filtered result. But that is outside the scope of this series. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-20write_entry(): separate two helper functions outLibravatar Junio C Hamano1-17/+26
In the write-out codepath, a block of code determines what file in the working tree to write to, and opens an output file descriptor to it. After writing the contents out to the file, another block of code runs fstat() on the file descriptor when appropriate. Separate these blocks out to open_output_fd() and fstat_output() helper functions. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29entry.c: remove "checkout-index" from error messagesLibravatar Nguyễn Thái Ngọc Duy1-8/+8
Back then when entry.c was part of checkout-index (or checkout-cache at that time [1]). It makes sense to print the command name in error messages. Nowadays entry.c is in libgit and can be used by any commands, printing "git checkout-index: blah" does no more than confusion. The error messages without it still give enough information. [1] 12dccc1 (Make fiel checkout function available to the git library - 2005-06-05) Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-20Merge branch 'jc/symbol-static'Libravatar Junio C Hamano1-1/+1
* jc/symbol-static: date.c: mark file-local function static Replace parse_blob() with an explanatory comment symlinks.c: remove unused functions object.c: remove unused functions strbuf.c: remove unused function sha1_file.c: remove unused function mailmap.c: remove unused function utf8.c: mark file-local function static submodule.c: mark file-local function static quote.c: mark file-local function static remote-curl.c: mark file-local function static read-cache.c: mark file-local functions static parse-options.c: mark file-local function static entry.c: mark file-local function static http.c: mark file-local functions static pretty.c: mark file-local function static builtin-rev-list.c: mark file-local function static bisect.c: mark file-local function static
2010-01-13Merge branch 'nd/sparse'Libravatar Junio C Hamano1-1/+1
* nd/sparse: (25 commits) t7002: test for not using external grep on skip-worktree paths t7002: set test prerequisite "external-grep" if supported grep: do not do external grep on skip-worktree entries commit: correctly respect skip-worktree bit ie_match_stat(): do not ignore skip-worktree bit with CE_MATCH_IGNORE_VALID tests: rename duplicate t1009 sparse checkout: inhibit empty worktree Add tests for sparse checkout read-tree: add --no-sparse-checkout to disable sparse checkout support unpack-trees(): ignore worktree check outside checkout area unpack_trees(): apply $GIT_DIR/info/sparse-checkout to the final index unpack-trees(): "enable" sparse checkout and load $GIT_DIR/info/sparse-checkout unpack-trees.c: generalize verify_* functions unpack-trees(): add CE_WT_REMOVE to remove on worktree alone Introduce "sparse checkout" dir.c: export excluded_1() and add_excludes_from_file_1() excluded_1(): support exclude files in index unpack-trees(): carry skip-worktree bit over in merged_entry() Read .gitignore from index if it is skip-worktree Avoid writing to buffer in add_excludes_from_file_1() ... Conflicts: .gitignore Documentation/config.txt Documentation/git-update-index.txt Makefile entry.c t/t7002-grep.sh
2010-01-12entry.c: mark file-local function staticLibravatar Junio C Hamano1-1/+1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-14ie_match_stat(): do not ignore skip-worktree bit with CE_MATCH_IGNORE_VALIDLibravatar Nguyễn Thái Ngọc Duy1-1/+1
Previously CE_MATCH_IGNORE_VALID flag is used by both valid and skip-worktree bits. While the two bits have similar behaviour, sharing this flag means "git update-index --really-refresh" will ignore skip-worktree while it should not. Instead another flag is introduced to ignore skip-worktree bit, CE_MATCH_IGNORE_VALID only applies to valid bit. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-08-18check_path(): allow symlinked directories to checkout-index --prefixLibravatar Junio C Hamano1-4/+8
Merlyn noticed that Documentation/install-doc-quick.sh no longer correctly removes old installed documents when the target directory has a leading path that is a symlink. It turns out that "checkout-index --prefix" was broken by recent b6986d8 (git-checkout: be careful about untracked symlinks, 2009-07-29). I suspect has_symlink_leading_path() could learn the third parameter (prefix that is allowed to be symlinked directories) to allow us to retire a similar function has_dirs_only_path(). Another avenue of fixing this I considered was to get rid of base_dir and base_dir_len from "struct checkout", and instead make "git checkout-index" when run with --prefix mkdir the leading path and chdir in there. It might be the best longer term solution to this issue, as the base_dir feature is used only by that rather obscure codepath as far as I know. But at least this patch should fix this breakage. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-29git-checkout: be careful about untracked symlinksLibravatar Linus Torvalds1-1/+14
This fixes the case where an untracked symlink that points at a directory with tracked paths confuses the checkout logic, demostrated in t6035. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-27Use die_errno() instead of die() when checking syscallsLibravatar Thomas Rast1-1/+1
Lots of die() calls did not actually report the kind of error, which can leave the user confused as to the real problem. Use die_errno() where we check a system/library call that sets errno on failure, or one of the following that wrap such calls: Function Passes on error from -------- -------------------- odb_pack_keep open read_ancestry fopen read_in_full xread strbuf_read xread strbuf_read_file open or strbuf_read_file strbuf_readlink readlink write_in_full xwrite Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-27Convert existing die(..., strerror(errno)) to die_errno()Libravatar Thomas Rast1-4/+4
Change calls to die(..., strerror(errno)) to use the new die_errno(). In the process, also make slight style adjustments: at least state _something_ about the function that failed (instead of just printing the pathname), and put paths in single quotes. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-29replace direct calls to unlink(2) with unlink_or_warnLibravatar Alex Riesen1-1/+1
This helps to notice when something's going wrong, especially on systems which lock open files. I used the following criteria when selecting the code for replacement: - it was already printing a warning for the unlink failures - it is in a function which already printing something or is called from such a function - it is in a static function, returning void and the function is only called from a builtin main function (cmd_) - it is in a function which handles emergency exit (signal handlers) - it is in a function which is obvously cleaning up the lockfiles Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-20Windows: Skip fstat/lstat optimization in write_entry()Libravatar Johannes Sixt1-1/+2
Commit e4c72923 (write_entry(): use fstat() instead of lstat() when file is open, 2009-02-09) introduced an optimization of write_entry(). Unfortunately, we cannot take advantage of this optimization on Windows because there is no guarantee that the time stamps are updated before the file is closed: "The only guarantee about a file timestamp is that the file time is correctly reflected when the handle that makes the change is closed." (http://msdn.microsoft.com/en-us/library/ms724290(VS.85).aspx) The failure of this optimization on Windows can be observed most easily by running a 'git checkout' that has to update several large files. In this case, 'git checkout' will report modified files, but infact only the timestamps were incorrectly recorded in the index, as can be verified by a subsequent 'git diff', which shows no change. Dmitry Potapov reports the same fix needs on Cygwin; this commit contains his updates for that. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-09write_entry(): use fstat() instead of lstat() when file is openLibravatar Kjetil Barvik1-3/+9
Currently inside write_entry() we do an lstat(path, &st) call on a file which have just been opened inside the exact same function. It should be better to call fstat(fd, &st) on the file while it is open, and it should be at least as fast as the lstat() method. Signed-off-by: Kjetil Barvik <barvik@broadpark.no> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-09write_entry(): cleanup of some duplicated codeLibravatar Kjetil Barvik1-45/+30
The switch-cases for S_IFREG and S_IFLNK was so similar that it will be better to do some cleanup and use the common parts of it. And the entry.c file should now be clean for 'gcc -Wextra' warnings. Signed-off-by: Kjetil Barvik <barvik@broadpark.no> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-09create_directories(): remove some memcpy() and strchr() callsLibravatar Kjetil Barvik1-9/+14
Remove the call to memcpy() and strchr() for each path component tested, and instead add each path component as we go forward inside the while-loop. Impact: small optimisation Signed-off-by: Kjetil Barvik <barvik@broadpark.no> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-09lstat_cache(): swap func(length, string) into func(string, length)Libravatar Kjetil Barvik1-1/+1
Swap function argument pair (length, string) into (string, length) to conform with the commonly used order inside the GIT source code. Also, add a note about this fact into the coding guidelines. Signed-off-by: Kjetil Barvik <barvik@broadpark.no> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-25Merge branch 'kb/lstat-cache'Libravatar Junio C Hamano1-22/+12
* kb/lstat-cache: lstat_cache(): introduce clear_lstat_cache() function lstat_cache(): introduce invalidate_lstat_cache() function lstat_cache(): introduce has_dirs_only_path() function lstat_cache(): introduce has_symlink_or_noent_leading_path() function lstat_cache(): more cache effective symlink/directory detection
2009-01-18lstat_cache(): introduce has_dirs_only_path() functionLibravatar Kjetil Barvik1-22/+12
The create_directories() function in entry.c currently calls stat() or lstat() for each path component of the pathname 'path' each and every time. For the 'git checkout' command, this function is called on each file for which we must do an update (ce->ce_flags & CE_UPDATE), so we get lots and lots of calls. To fix this, we make a new wrapper to the lstat_cache() function, and call the wrapper function instead of the calls to the stat() or the lstat() functions. Since the paths given to the create_directories() function, is sorted alphabetically, the new wrapper would be very cache effective in this situation. To support it we must update the lstat_cache() function to be able to say that "please test the complete length of 'name'", and also to give it the length of a prefix, where the cache should use the stat() function instead of the lstat() function to test each path component. Thanks to Junio C Hamano, Linus Torvalds and Rene Scharfe for valuable comments to this patch! Signed-off-by: Kjetil Barvik <barvik@broadpark.no> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-11add is_dot_or_dotdot inline functionLibravatar Alexander Potashev1-3/+2
A new inline function is_dot_or_dotdot is used to check if the directory name is either "." or "..". It returns a non-zero value if the given string is "." or "..". It's applicable to a lot of Git source code. Signed-off-by: Alexander Potashev <aspotashev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-31'git foo' program identifies itself without dash in die() messagesLibravatar Junio C Hamano1-10/+10
This is a mechanical conversion of all '*.c' files with: s/((?:die|error|warning)\("git)-(\S+:)/$1 $2/; The result was manually inspected and no false positive was found. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-18Fix possible Solaris problem in 'checkout_entry()'Libravatar Linus Torvalds1-2/+2
Currently when checking out an entry "path", we try to unlink(2) it first (because there could be stale file), and if there is a directory there, try to deal with it (typically we run recursive rmdir). We ignore the error return from this unlink because there may not even be any file there. However if you are root on Solaris, you can unlink(2) a directory successfully and corrupt your filesystem. This moves the code around and check the directory first, and then unlink(2). Also we check the error code from it. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-21Make on-disk index representation separate from in-core oneLibravatar Linus Torvalds1-3/+3
This converts the index explicitly on read and write to its on-disk format, allowing the in-core format to contain more flags, and be simpler. In particular, the in-core format is now host-endian (as opposed to the on-disk one that is network endian in order to be able to be shared across machines) and as a result we can dispense with all the htonl/ntohl on accesses to the cache_entry fields. This will make it easier to make use of various temporary flags that do not exist in the on-disk format. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14Merge branch 'jc/maint-add-sync-stat'Libravatar Junio C Hamano1-1/+1
* jc/maint-add-sync-stat: t2200: test more cases of "add -u" git-add: make the entry stat-clean after re-adding the same contents ce_match_stat, run_diff_files: use symbolic constants for readability Conflicts: builtin-add.c
2007-11-10ce_match_stat, run_diff_files: use symbolic constants for readabilityLibravatar Junio C Hamano1-1/+1
ce_match_stat() can be told: (1) to ignore CE_VALID bit (used under "assume unchanged" mode) and perform the stat comparison anyway; (2) not to perform the contents comparison for racily clean entries and report mismatch of cached stat information; using its "option" parameter. Give them symbolic constants. Similarly, run_diff_files() can be told not to report anything on removed paths. Also give it a symbolic constant for that. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-10-22Correct some sizeof(size_t) != sizeof(unsigned long) typing errorsLibravatar René Scharfe1-1/+3
Fix size_t vs. unsigned long pointer mismatch warnings introduced with the addition of strbuf_detach(). Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-29strbuf change: be sure ->buf is never ever NULL.Libravatar Pierre Habouzit1-2/+1
For that purpose, the ->buf is always initialized with a char * buf living in the strbuf module. It is made a char * so that we can sloppily accept things that perform: sb->buf[0] = '\0', and because you can't pass "" as an initializer for ->buf without making gcc unhappy for very good reasons. strbuf_init/_detach/_grow have been fixed to trust ->alloc and not ->buf anymore. as a consequence strbuf_detach is _mandatory_ to detach a buffer, copying ->buf isn't an option anymore, if ->buf is going to escape from the scope, and eventually be free'd. API changes: * strbuf_setlen now always works, so just make strbuf_reset a convenience macro. * strbuf_detatch takes a size_t* optional argument (meaning it can be NULL) to copy the buffer's len, as it was needed for this refactor to make the code more readable, and working like the callers. Signed-off-by: Pierre Habouzit <madcoder@debian.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-16Rewrite convert_to_{git,working_tree} to use strbuf's.Libravatar Pierre Habouzit1-4/+6
* Now, those functions take an "out" strbuf argument, where they store their result if any. In that case, it also returns 1, else it returns 0. * those functions support "in place" editing, in the sense that it's OK to call them this way: convert_to_git(path, sb->buf, sb->len, sb); When doable, conversions are done in place for real, else the strbuf content is just replaced with the new one, transparentely for the caller. If you want to create a new filter working this way, being the accumulation of filter1, filter2, ... filtern, then your meta_filter would be: int meta_filter(..., const char *src, size_t len, struct strbuf *sb) { int ret = 0; ret |= filter1(...., src, len, sb); if (ret) { src = sb->buf; len = sb->len; } ret |= filter2(...., src, len, sb); if (ret) { src = sb->buf; len = sb->len; } .... return ret | filtern(..., src, len, sb); } That's why subfilters the convert_to_* functions called were also rewritten to work this way. Signed-off-by: Pierre Habouzit <madcoder@debian.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-14attr.c: read .gitattributes from index as well.Libravatar Junio C Hamano1-9/+10
This makes .gitattributes files to be read from the index when they are not checked out to the work tree. This is in line with the way we always allowed low-level tools to operate in sparsely checked out work tree in a reasonable way. It swaps the order of new file creation and converting the blob to work tree representation; otherwise when we are in the middle of checking out .gitattributes we would notice an empty but unwritten .gitattributes file in the work tree and will ignore the copy in the index. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-18Merge branch 'maint'Libravatar Junio C Hamano1-7/+30
* maint: Force listingblocks to be monospaced in manpages Do not expect unlink(2) to fail on a directory.