summaryrefslogtreecommitdiff
path: root/entry.c
AgeCommit message (Collapse)AuthorFilesLines
2017-10-11Merge branch 'ls/filter-process-delayed'Libravatar Junio C Hamano1-36/+52
Bugfixes to an already graduated series. * ls/filter-process-delayed: write_entry: untangle symlink and regular-file cases write_entry: avoid reading blobs in CE_RETRY case write_entry: fix leak when retrying delayed filter entry.c: check if file exists after checkout entry.c: update cache entry only for existing files
2017-10-10write_entry: untangle symlink and regular-file casesLibravatar Jeff King1-31/+40
The write_entry() function switches on the mode of the entry we're going to write out. The cases for S_IFLNK and S_IFREG are lumped together. In earlier versions of the code, this made some sense. They have a shared preamble (which reads the blob content), a short type-specific body, and a shared conclusion (which writes out the file contents; always for S_IFREG and only sometimes for S_IFLNK). But over time this has grown to make less sense. The preamble now has conditional bits for each type, and the S_IFREG body has grown a lot more complicated. It's hard to follow the logic of which code is running for which mode. Let's give each mode its own case arm. We will still share the conclusion code, which means we now jump to it with a goto. Ideally we'd pull that shared code into its own function, but it touches so much internal state in the write_entry() function that the end result is actually harder to follow than the goto. While we're here, we'll touch up a few bits of whitespace to make the beginning and endings of the cases easier to read. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-10write_entry: avoid reading blobs in CE_RETRY caseLibravatar Jeff King1-11/+14
When retrying a delayed filter-process request, we don't need to send the blob to the filter a second time. However, we read it unconditionally into a buffer, only to later throw away that buffer. We can make this more efficient by skipping the read in the first place when it isn't necessary. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-10write_entry: fix leak when retrying delayed filterLibravatar Jeff King1-0/+1
When write_entry() retries a delayed filter request, we don't need to send the blob content to the filter again, and set the pointer to NULL. But doing so means we leak the contents we read earlier from read_blob_entry(). Let's make sure to free it before dropping the pointer. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-06entry.c: check if file exists after checkoutLibravatar Lars Schneider1-1/+3
If we are checking out a file and somebody else racily deletes our file, then we would write garbage to the cache entry. Fix that by checking the result of the lstat() call on that file. Print an error to the user if the file does not exist. Reported-by: Jeff King <peff@peff.net> Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-05entry.c: update cache entry only for existing filesLibravatar Lars Schneider1-1/+2
In 2841e8f ("convert: add "status=delayed" to filter process protocol", 2017-06-30) we taught the filter process protocol to delay responses. That means an external filter might answer in the first write_entry() call on a file that requires filtering "I got your request, but I can't answer right now. Ask again later!". As Git got no answer, we do not write anything to the filesystem. Consequently, the lstat() call in the finish block of the function writes garbage to the cache entry. The garbage is eventually overwritten when the filter answers with the final file content in a subsequent write_entry() call. Fix the brief time window of garbage in the cache entry by adding a special finish block that does nothing for delayed responses. The cache entry is written properly in a subsequent write_entry() call where the filter responds with the final file content. Reported-by: Jeff King <peff@peff.net> Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-25Merge branch 'jk/write-in-full-fix'Libravatar Junio C Hamano1-2/+3
Many codepaths did not diagnose write failures correctly when disks go full, due to their misuse of write_in_full() helper function, which have been corrected. * jk/write-in-full-fix: read_pack_header: handle signed/unsigned comparison in read result config: flip return value of store_write_*() notes-merge: use ssize_t for write_in_full() return value pkt-line: check write_in_full() errors against "< 0" convert less-trivial versions of "write_in_full() != len" avoid "write_in_full(fd, buf, len) != len" pattern get-tar-commit-id: check write_in_full() return against 0 config: avoid "write_in_full(fd, buf, len) < len" pattern
2017-09-14convert less-trivial versions of "write_in_full() != len"Libravatar Jeff King1-2/+3
The prior commit converted many sites to check the return value of write_in_full() for negativity, rather than a mismatch with the input length. This patch covers similar cases, but where the return value is stored in an intermediate variable. These should get the same treatment, but they need to be reviewed more carefully since it would be a bug if the return value is stored in an unsigned type (which indeed, it is in one of the cases). Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-10Merge branch 'ls/convert-filter-progress'Libravatar Junio C Hamano1-1/+14
The codepath to call external process filter for smudge/clean operation learned to show the progress meter. * ls/convert-filter-progress: convert: display progress for filtered objects that have been delayed
2017-08-24convert: display progress for filtered objects that have been delayedLibravatar Lars Schneider1-1/+15
In 2841e8f ("convert: add "status=delayed" to filter process protocol", 2017-06-30) we taught the filter process protocol to delayed responses. These responses are processed after the "Checking out files" phase. If the processing takes noticeable time, then the user might think Git is stuck. Display the progress of the delayed responses to let the user know that Git is still processing objects. This works very well for objects that can be filtered quickly. If filtering of an individual object takes noticeable time, then the user might still think that Git is stuck. However, in that case the user would at least know what Git is doing. It would be technical more correct to display "Checking out files whose content filtering has been delayed". For brevity we only print "Filtering content". The finish_delayed_checkout() call was moved below the stop_progress() call in unpack-trees.c to ensure that the "Checking out files" progress is properly stopped before the "Filtering content" progress starts in finish_delayed_checkout(). Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Suggested-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-30convert: add "status=delayed" to filter process protocolLibravatar Lars Schneider1-5/+127
Some `clean` / `smudge` filters may require a significant amount of time to process a single blob (e.g. the Git LFS smudge filter might perform network requests). During this process the Git checkout operation is blocked and Git needs to wait until the filter is done to continue with the checkout. Teach the filter process protocol, introduced in edcc8581 ("convert: add filter.<driver>.process option", 2016-10-16), to accept the status "delayed" as response to a filter request. Upon this response Git continues with the checkout operation. After the checkout operation Git calls "finish_delayed_checkout" which queries the filter for remaining blobs. If the filter is still working on the completion, then the filter is expected to block. If the filter has completed all remaining blobs then an empty response is expected. Git has a multiple code paths that checkout a blob. Support delayed checkouts only in `clone` (in unpack-trees.c) and `checkout` operations for now. The optimization is most effective in these code paths as all files of the tree are processed. Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-04-18entry.c: submodule recursing: respect force flag correctlyLibravatar Stefan Beller1-4/+4
In case of a non-forced worktree update, the submodule movement is tested in a dry run first, such that it doesn't matter if the actual update is done via the force flag. However for correctness, we want to give the flag as specified by the user. All callers have been inspected and updated if needed. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-16entry.c: create submodules when interestingLibravatar Stefan Beller1-0/+30
When a submodule is introduced with a new revision we need to create the submodule in the worktree as well. As 'submodule_move_head' handles edge cases, all we have to do is call it from within the function that creates new files in the working tree for workingtree operations. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-07streaming: make stream_blob_to_fd take struct object_idLibravatar brian m. carlson1-1/+1
Since all of its callers have been updated, modify stream_blob_to_fd to take a struct object_id. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-07cache: convert struct cache_entry to use struct object_idLibravatar brian m. carlson1-4/+5
Convert struct cache_entry to use struct object_id by applying the following semantic patch and the object_id transforms from contrib, plus the actual change to the struct: @@ struct cache_entry E1; @@ - E1.sha1 + E1.oid.hash @@ struct cache_entry *E1; @@ - E1->sha1 + E1->oid.hash Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-09entry.c: use error_errno()Libravatar Nguyễn Thái Ngọc Duy1-6/+4
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-02-22use xmallocz to avoid size arithmeticLibravatar Jeff King1-1/+1
We frequently allocate strings as xmalloc(len + 1), where the extra 1 is for the NUL terminator. This can be done more simply with xmallocz, which also checks for integer overflow. There's no case where switching xmalloc(n+1) to xmallocz(n) is wrong; the result is the same length, and malloc made no guarantees about what was in the buffer anyway. But in some cases, we can stop manually placing NUL at the end of the allocated buffer. But that's only safe if it's clear that the contents will always fill the buffer. In each case where this patch does so, I manually examined the control flow, and I tried to err on the side of caution. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-25entry.c: convert strcpy to xsnprintfLibravatar Jeff King1-2/+2
This particular conversion is non-obvious, because nobody has passed our function the length of the destination buffer. However, the interface to checkout_entry specifies that the buffer must be at least TEMPORARY_FILENAME_LENGTH bytes long, so we can check that (meaning the existing code was not buggy, but merely worrisome to somebody reading it). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-13read-cache: mark updated entries for split indexLibravatar Nguyễn Thái Ngọc Duy1-0/+1
The large part of this patch just follows CE_ENTRY_CHANGED marks. replace_index_entry() is updated to update split_index->base->cache[] as well so base->cache[] does not reference to a freed entry. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-13entry.c: update cache_changed if refresh_cache is set in checkout_entry()Libravatar Nguyễn Thái Ngọc Duy1-0/+2
Other fill_stat_cache_info() is on new entries, which should set CE_ENTRY_ADDED in cache_changed, so we're safe. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-25Merge branch 'mh/remove-subtree-long-pathname-fix'Libravatar Junio C Hamano1-32/+32
* mh/remove-subtree-long-pathname-fix: entry.c: fix possible buffer overflow in remove_subtree() checkout_entry(): use the strbuf throughout the function
2014-03-13entry.c: fix possible buffer overflow in remove_subtree()Libravatar Michael Haggerty1-17/+17
remove_subtree() manipulated path in a fixed-size buffer even though the length of the input, let alone the length of entries within the directory, were not known in advance. Change the function to take a strbuf argument and use that object as its scratch space. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-13checkout_entry(): use the strbuf throughout the functionLibravatar Michael Haggerty1-16/+16
There is no need to break out the "buf" and "len" members into separate temporary variables. Rename path_buf to path and use path.buf and path.len directly. This makes it easier to reason about the data flow in the function. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-10-24checkout_entry(): clarify the use of topath[] parameterLibravatar Junio C Hamano1-0/+8
The said function has this signature: extern int checkout_entry(struct cache_entry *ce, const struct checkout *state, char *topath); At first glance, it might appear that the caller of checkout_entry() can specify to which path the contents are written out by the last parameter, and it is tempting to add "const" in front of its type. In reality, however, topath[] is to point at a buffer to store the temporary path generated by the callchain originating from this function, and the temporary path is always short, much shorter than the buffer prepared by its only caller in builtin/checkout-index.c. Document the code a bit to clarify so that future callers know how to use the function better. Noticed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-10-24entry.c: convert checkout_entry to use strbufLibravatar Nguyễn Thái Ngọc Duy1-5/+8
The old code does not do boundary check so any paths longer than PATH_MAX can cause buffer overflow. Replace it with strbuf to handle paths of arbitrary length. The OS may reject if the path is too long though. But in that case we report the cause (e.g. name too long) and usually move on to checking out the next entry. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-22Merge branch 'nd/const-struct-cache-entry'Libravatar Junio C Hamano1-5/+7
* nd/const-struct-cache-entry: Convert "struct cache_entry *" to "const ..." wherever possible
2013-07-18apply, entry: speak of submodules instead of subprojectsLibravatar Thomas Rast1-2/+2
There are only four (with some generous rounding) instances in the current source code where we speak of "subproject" instead of "submodule". They are as follows: * one error message in git-apply and two in entry.c * the patch format for submodule changes The latter was introduced in 0478675 (Expose subprojects as special files to "git diff" machinery, 2007-04-15), apparently before the terminology was settled. We can of course not change the patch format. Let's at least change the error messages to consistently call them "submodule". Signed-off-by: Thomas Rast <trast@inf.ethz.ch> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-09Convert "struct cache_entry *" to "const ..." wherever possibleLibravatar Nguyễn Thái Ngọc Duy1-5/+7
I attempted to make index_state->cache[] a "const struct cache_entry **" to find out how existing entries in index are modified and where. The question I have is what do we do if we really need to keep track of on-disk changes in the index. The result is - diff-lib.c: setting CE_UPTODATE - name-hash.c: setting CE_HASHED - preload-index.c, read-cache.c, unpack-trees.c and builtin/update-index: obvious - entry.c: write_entry() may refresh the checked out entry via fill_stat_cache_info(). This causes "non-const struct cache_entry *" in builtin/apply.c, builtin/checkout-index.c and builtin/checkout.c - builtin/ls-files.c: --with-tree changes stagemask and may set CE_UPDATE Of these, write_entry() and its call sites are probably most interesting because it modifies on-disk info. But this is stat info and can be retrieved via refresh, at least for porcelain commands. Other just uses ce_flags for local purposes. So, keeping track of "dirty" entries is just a matter of setting a flag in index modification functions exposed by read-cache.c. Except unpack-trees, the rest of the code base does not do anything funny behind read-cache's back. The actual patch is less valueable than the summary above. But if anyone wants to re-identify the above sites. Applying this patch, then this: diff --git a/cache.h b/cache.h index 430d021..1692891 100644 --- a/cache.h +++ b/cache.h @@ -267,7 +267,7 @@ static inline unsigned int canon_mode(unsigned int mode) #define cache_entry_size(len) (offsetof(struct cache_entry,name) + (len) + 1) struct index_state { - struct cache_entry **cache; + const struct cache_entry **cache; unsigned int version; unsigned int cache_nr, cache_alloc, cache_changed; struct string_list *resolve_undo; will help quickly identify them without bogus warnings. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-03Merge branch 'jk/check-corrupt-objects-carefully'Libravatar Junio C Hamano1-7/+9
Have the streaming interface and other codepaths more carefully examine for corrupt objects. * jk/check-corrupt-objects-carefully: clone: leave repo in place after checkout errors clone: run check_everything_connected clone: die on errors from unpack_trees add tests for cloning corrupted repositories streaming_write_entry: propagate streaming errors add test for streaming corrupt blobs avoid infinite loop in read_istream_loose read_istream_filtered: propagate read error from upstream check_sha1_signature: check return value from read_istream stream_blob_to_fd: detect errors reading from stream
2013-03-28Merge branch 'jk/checkout-attribute-lookup'Libravatar Junio C Hamano1-1/+1
Codepath to stream blob object contents directly from the object store to filesystem did not use the correct path to find conversion filters when writing to temporary files. * jk/checkout-attribute-lookup: t2003: work around path mangling issue on Windows entry: fix filter lookup t2003: modernize style
2013-03-27streaming_write_entry: propagate streaming errorsLibravatar Jeff King1-7/+9
When we are streaming an index blob to disk, we store the error from stream_blob_to_fd in the "result" variable, and then immediately overwrite that with the return value of "close". That means we catch errors on close (e.g., problems committing the file to disk), but miss anything which happened before then. We can fix this by using bitwise-OR to accumulate errors in our result variable. While we're here, we can also simplify the error handling with an early return, which makes it easier to see under which circumstances we need to clean up. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-14entry: fix filter lookupLibravatar John Keeping1-1/+1
When looking up the stream filter, write_entry() should be passing the path of the file in the repository, not the path to which the content is going to be written. This allows the file to be correctly looked up against the .gitattributes files in the working tree. This change makes the streaming case match the non-streaming case which passes ce->name to convert_to_working_tree later in the same function. The two tests added here test the different paths through write_entry since the CRLF filter is a streaming filter but the user-defined smudge filter is not streamed. Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-07streaming: make streaming-write-entry to be more reusableLibravatar Junio C Hamano1-48/+5
The static function in entry.c takes a cache entry and streams its blob contents to a file in the working tree. Refactor the logic to a new API function stream_blob_to_fd() that takes an object name and an open file descriptor, so that it can be reused by other callers. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-26Add streaming filter APILibravatar Junio C Hamano1-6/+10
This introduces an API to plug custom filters to an input stream. The caller gets get_stream_filter("path") to obtain an appropriate filter for the path, and then uses it when opening an input stream via open_istream(). After that, the caller can read from the stream with read_istream(), and close it with close_istream(), just like an unfiltered stream. This only adds a "null" filter that is a pass-thru filter, but later changes can add LF-to-CRLF and other filters, and the callers of the streaming API do not have to change. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-20streaming_write_entry(): support files with holesLibravatar Junio C Hamano1-2/+19
One typical use of a large binary file is to hold a sparse on-disk hash table with a lot of holes. Help preserving the holes with lseek(). Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-20streaming_write_entry(): use streaming API in write_entry()Libravatar Junio C Hamano1-0/+52
When the output to a path does not have to be converted, we can read from the object database from the streaming API and write to the file in the working tree, without having to hold everything in the memory. The ident, auto- and safe- crlf conversions inherently require you to read the whole thing before deciding what to do, so while it is technically possible to support them by using a buffer of an unbound size or rewinding and reading the stream twice, it is less practical than the traditional "read the whole thing in core and convert" approach. Adding streaming filters for the other conversions on top of this should be doable by tweaking the can_bypass_conversion() function (it should be renamed to can_filter_stream() when it happens). Then the streaming API can be extended to wrap the git_istream streaming_write_entry() opens on the underlying object in another git_istream that reads from it, filters what is read, and let the streaming_write_entry() read the filtered result. But that is outside the scope of this series. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-20write_entry(): separate two helper functions outLibravatar Junio C Hamano1-17/+26
In the write-out codepath, a block of code determines what file in the working tree to write to, and opens an output file descriptor to it. After writing the contents out to the file, another block of code runs fstat() on the file descriptor when appropriate. Separate these blocks out to open_output_fd() and fstat_output() helper functions. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29entry.c: remove "checkout-index" from error messagesLibravatar Nguyễn Thái Ngọc Duy1-8/+8
Back then when entry.c was part of checkout-index (or checkout-cache at that time [1]). It makes sense to print the command name in error messages. Nowadays entry.c is in libgit and can be used by any commands, printing "git checkout-index: blah" does no more than confusion. The error messages without it still give enough information. [1] 12dccc1 (Make fiel checkout function available to the git library - 2005-06-05) Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-20Merge branch 'jc/symbol-static'Libravatar Junio C Hamano1-1/+1
* jc/symbol-static: date.c: mark file-local function static Replace parse_blob() with an explanatory comment symlinks.c: remove unused functions object.c: remove unused functions strbuf.c: remove unused function sha1_file.c: remove unused function mailmap.c: remove unused function utf8.c: mark file-local function static submodule.c: mark file-local function static quote.c: mark file-local function static remote-curl.c: mark file-local function static read-cache.c: mark file-local functions static parse-options.c: mark file-local function static entry.c: mark file-local function static http.c: mark file-local functions static pretty.c: mark file-local function static builtin-rev-list.c: mark file-local function static bisect.c: mark file-local function static
2010-01-13Merge branch 'nd/sparse'Libravatar Junio C Hamano1-1/+1
* nd/sparse: (25 commits) t7002: test for not using external grep on skip-worktree paths t7002: set test prerequisite "external-grep" if supported grep: do not do external grep on skip-worktree entries commit: correctly respect skip-worktree bit ie_match_stat(): do not ignore skip-worktree bit with CE_MATCH_IGNORE_VALID tests: rename duplicate t1009 sparse checkout: inhibit empty worktree Add tests for sparse checkout read-tree: add --no-sparse-checkout to disable sparse checkout support unpack-trees(): ignore worktree check outside checkout area unpack_trees(): apply $GIT_DIR/info/sparse-checkout to the final index unpack-trees(): "enable" sparse checkout and load $GIT_DIR/info/sparse-checkout unpack-trees.c: generalize verify_* functions unpack-trees(): add CE_WT_REMOVE to remove on worktree alone Introduce "sparse checkout" dir.c: export excluded_1() and add_excludes_from_file_1() excluded_1(): support exclude files in index unpack-trees(): carry skip-worktree bit over in merged_entry() Read .gitignore from index if it is skip-worktree Avoid writing to buffer in add_excludes_from_file_1() ... Conflicts: .gitignore Documentation/config.txt Documentation/git-update-index.txt Makefile entry.c t/t7002-grep.sh
2010-01-12entry.c: mark file-local function staticLibravatar Junio C Hamano1-1/+1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-14ie_match_stat(): do not ignore skip-worktree bit with CE_MATCH_IGNORE_VALIDLibravatar Nguyễn Thái Ngọc Duy1-1/+1
Previously CE_MATCH_IGNORE_VALID flag is used by both valid and skip-worktree bits. While the two bits have similar behaviour, sharing this flag means "git update-index --really-refresh" will ignore skip-worktree while it should not. Instead another flag is introduced to ignore skip-worktree bit, CE_MATCH_IGNORE_VALID only applies to valid bit. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-08-18check_path(): allow symlinked directories to checkout-index --prefixLibravatar Junio C Hamano1-4/+8
Merlyn noticed that Documentation/install-doc-quick.sh no longer correctly removes old installed documents when the target directory has a leading path that is a symlink. It turns out that "checkout-index --prefix" was broken by recent b6986d8 (git-checkout: be careful about untracked symlinks, 2009-07-29). I suspect has_symlink_leading_path() could learn the third parameter (prefix that is allowed to be symlinked directories) to allow us to retire a similar function has_dirs_only_path(). Another avenue of fixing this I considered was to get rid of base_dir and base_dir_len from "struct checkout", and instead make "git checkout-index" when run with --prefix mkdir the leading path and chdir in there. It might be the best longer term solution to this issue, as the base_dir feature is used only by that rather obscure codepath as far as I know. But at least this patch should fix this breakage. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-29git-checkout: be careful about untracked symlinksLibravatar Linus Torvalds1-1/+14
This fixes the case where an untracked symlink that points at a directory with tracked paths confuses the checkout logic, demostrated in t6035. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-27Use die_errno() instead of die() when checking syscallsLibravatar Thomas Rast1-1/+1
Lots of die() calls did not actually report the kind of error, which can leave the user confused as to the real problem. Use die_errno() where we check a system/library call that sets errno on failure, or one of the following that wrap such calls: Function Passes on error from -------- -------------------- odb_pack_keep open read_ancestry fopen read_in_full xread strbuf_read xread strbuf_read_file open or strbuf_read_file strbuf_readlink readlink write_in_full xwrite Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-27Convert existing die(..., strerror(errno)) to die_errno()Libravatar Thomas Rast1-4/+4
Change calls to die(..., strerror(errno)) to use the new die_errno(). In the process, also make slight style adjustments: at least state _something_ about the function that failed (instead of just printing the pathname), and put paths in single quotes. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-29replace direct calls to unlink(2) with unlink_or_warnLibravatar Alex Riesen1-1/+1
This helps to notice when something's going wrong, especially on systems which lock open files. I used the following criteria when selecting the code for replacement: - it was already printing a warning for the unlink failures - it is in a function which already printing something or is called from such a function - it is in a static function, returning void and the function is only called from a builtin main function (cmd_) - it is in a function which handles emergency exit (signal handlers) - it is in a function which is obvously cleaning up the lockfiles Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-20Windows: Skip fstat/lstat optimization in write_entry()Libravatar Johannes Sixt1-1/+2
Commit e4c72923 (write_entry(): use fstat() instead of lstat() when file is open, 2009-02-09) introduced an optimization of write_entry(). Unfortunately, we cannot take advantage of this optimization on Windows because there is no guarantee that the time stamps are updated before the file is closed: "The only guarantee about a file timestamp is that the file time is correctly reflected when the handle that makes the change is closed." (http://msdn.microsoft.com/en-us/library/ms724290(VS.85).aspx) The failure of this optimization on Windows can be observed most easily by running a 'git checkout' that has to update several large files. In this case, 'git checkout' will report modified files, but infact only the timestamps were incorrectly recorded in the index, as can be verified by a subsequent 'git diff', which shows no change. Dmitry Potapov reports the same fix needs on Cygwin; this commit contains his updates for that. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-09write_entry(): use fstat() instead of lstat() when file is openLibravatar Kjetil Barvik1-3/+9
Currently inside write_entry() we do an lstat(path, &st) call on a file which have just been opened inside the exact same function. It should be better to call fstat(fd, &st) on the file while it is open, and it should be at least as fast as the lstat() method. Signed-off-by: Kjetil Barvik <barvik@broadpark.no> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-09write_entry(): cleanup of some duplicated codeLibravatar Kjetil Barvik1-45/+30
The switch-cases for S_IFREG and S_IFLNK was so similar that it will be better to do some cleanup and use the common parts of it. And the entry.c file should now be clean for 'gcc -Wextra' warnings. Signed-off-by: Kjetil Barvik <barvik@broadpark.no> Signed-off-by: Junio C Hamano <gitster@pobox.com>