summaryrefslogtreecommitdiff
path: root/dir.h
AgeCommit message (Collapse)AuthorFilesLines
2013-09-11Merge branch 'jc/ls-files-killed-optim'Libravatar Junio C Hamano1-1/+2
"git ls-files -k" needs to crawl only the part of the working tree that may overlap the paths in the index to find killed files, but shared code with the logic to find all the untracked files, which made it unnecessarily inefficient. * jc/ls-files-killed-optim: dir.c::test_one_path(): work around directory_exists_in_index_icase() breakage t3010: update to demonstrate "ls-files -k" optimization pitfalls ls-files -k: a directory only can be killed if the index has a non-directory dir.c: use the cache_* macro to access the current index
2013-08-15ls-files -k: a directory only can be killed if the index has a non-directoryLibravatar Junio C Hamano1-1/+2
"ls-files -o" and "ls-files -k" both traverse the working tree down to find either all untracked paths or those that will be "killed" (removed from the working tree to make room) when the paths recorded in the index are checked out. It is necessary to traverse the working tree fully when enumerating all the "other" paths, but when we are only interested in "killed" paths, we can take advantage of the fact that paths that do not overlap with entries in the index can never be killed. The treat_one_path() helper function, which is called during the recursive traversal, is the ideal place to implement an optimization. When we are looking at a directory P in the working tree, there are three cases: (1) P exists in the index. Everything inside the directory P in the working tree needs to go when P is checked out from the index. (2) P does not exist in the index, but there is P/Q in the index. We know P will stay a directory when we check out the contents of the index, but we do not know yet if there is a directory P/Q in the working tree to be killed, so we need to recurse. (3) P does not exist in the index, and there is no P/Q in the index to require P to be a directory, either. Only in this case, we know that everything inside P will not be killed without recursing. Note that this helper is called by treat_leading_path() that decides if we need to traverse only subdirectories of a single common leading directory, which is essential for this optimization to be correct. This caller checks each level of the leading path component from shallower directory to deeper ones, and that is what allows us to only check if the path appears in the index. If the call to treat_one_path() weren't there, given a path P/Q/R, the real traversal may start from directory P/Q/R, even when the index records P as a regular file, and we would end up having to check if any leading subpath in P/Q/R, e.g. P, appears in the index. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-15pathspec: support :(glob) syntaxLibravatar Nguyễn Thái Ngọc Duy1-5/+4
:(glob)path differs from plain pathspec that it uses wildmatch with WM_PATHNAME while the other uses fnmatch without FNM_PATHNAME. The difference lies in how '*' (and '**') is processed. With the introduction of :(glob) and :(literal) and their global options --[no]glob-pathspecs, the user can: - make everything literal by default via --noglob-pathspecs --literal-pathspecs cannot be used for this purpose as it disables _all_ pathspec magic. - individually turn on globbing with :(glob) - make everything globbing by default via --glob-pathspecs - individually turn off globbing with :(literal) The implication behind this is, there is no way to gain the default matching behavior (i.e. fnmatch without FNM_PATHNAME). You either get new globbing or literal. The old fnmatch behavior is considered deprecated and discouraged to use. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-15remove match_pathspec() in favor of match_pathspec_depth()Libravatar Nguyễn Thái Ngọc Duy1-1/+0
match_pathspec_depth was created to replace match_pathspec (see 61cf282 (pathspec: add match_pathspec_depth() - 2010-12-15). It took more than two years, but the replacement finally happens :-) Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-15convert common_prefix() to use struct pathspecLibravatar Nguyễn Thái Ngọc Duy1-1/+1
The code now takes advantage of nowildcard_len field. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-15convert {read,fill}_directory to take struct pathspecLibravatar Nguyễn Thái Ngọc Duy1-2/+2
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-15add parse_pathspec() that converts cmdline args to struct pathspecLibravatar Nguyễn Thái Ngọc Duy1-0/+2
Currently to fill a struct pathspec, we do: const char **paths; paths = get_pathspec(prefix, argv); ... init_pathspec(&pathspec, paths); "paths" can only carry bare strings, which loses information from command line arguments such as pathspec magic or the prefix part's length for each argument. parse_pathspec() is introduced to combine the two calls into one. The plan is gradually replace all get_pathspec() and init_pathspec() with parse_pathspec(). get_pathspec() now becomes a thin wrapper of parse_pathspec(). parse_pathspec() allows the caller to reject the pathspec magics that it does not support. When a new pathspec magic is introduced, we can enable it per command after making sure that all underlying code has no problem with the new magic. "flags" parameter is currently unused. But it would allow callers to pass certain instructions to parse_pathspec, for example forcing literal pathspec when no magic is used. With the introduction of parse_pathspec, there are now two functions that can initialize struct pathspec: init_pathspec and parse_pathspec. Any semantic changes in struct pathspec must be reflected in both functions. init_pathspec() will be phased out in favor of parse_pathspec(). Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-15dir.c: git-status --ignored: don't scan the work tree twiceLibravatar Karsten Blees1-1/+2
'git-status --ignored' still scans the work tree twice to collect untracked and ignored files, respectively. fill_directory / read_directory already supports collecting untracked and ignored files in a single directory scan. However, the DIR_COLLECT_IGNORED flag to enable this has some git-add specific side-effects (e.g. it doesn't recurse into ignored directories, so listing ignored files with --untracked=all doesn't work). The DIR_SHOW_IGNORED flag doesn't list untracked files and returns ignored files in dir_struct.entries[] (instead of dir_struct.ignored[] as DIR_COLLECT_IGNORED). DIR_SHOW_IGNORED is used all throughout git. We don't want to break the existing API, so lets introduce a new flag DIR_SHOW_IGNORED_TOO that lists untracked as well as ignored files similar to DIR_COLLECT_FILES, but will recurse into sub-directories based on the other flags as DIR_SHOW_IGNORED does. In dir.c::read_directory_recursive, add ignored files to either dir_struct.entries[] or dir_struct.ignored[] based on the flags. Also move the DIR_COLLECT_IGNORED case here so that filling result lists is in a common place. In wt-status.c::wt_status_collect_untracked, use the new flag and read results from dir_struct.ignored[]. Remove the extra fill_directory call. builtin/check-ignore.c doesn't call fill_directory, setting the git-add specific DIR_COLLECT_IGNORED flag has no effect here. Remove for clarity. Update API documentation to reflect the changes. Performance: with this patch, 'git-status --ignored' is typically as fast as 'git-status'. Signed-off-by: Karsten Blees <blees@dcon.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-15dir.c: replace is_path_excluded with now equivalent is_excluded APILibravatar Karsten Blees1-13/+3
Signed-off-by: Karsten Blees <blees@dcon.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-15dir.c: unify is_excluded and is_path_excluded APIsLibravatar Karsten Blees1-3/+3
The is_excluded and is_path_excluded APIs are very similar, except for a few noteworthy differences: is_excluded doesn't handle ignored directories, results for paths within ignored directories are incorrect. This is probably based on the premise that recursive directory scans should stop at ignored directories, which is no longer true (in certain cases, read_directory_recursive currently calls is_excluded *and* is_path_excluded to get correct ignored state). is_excluded caches parsed .gitignore files of the last directory in struct dir_struct. If the directory changes, it finds a common parent directory and is very careful to drop only as much state as necessary. On the other hand, is_excluded will also read and parse .gitignore files in already ignored directories, which are completely irrelevant. is_path_excluded correctly handles ignored directories by checking if any component in the path is excluded. As it uses is_excluded internally, this unfortunately forces is_excluded to drop and re-read all .gitignore files, as there is no common parent directory for the root dir. is_path_excluded tracks state in a separate struct path_exclude_check, which is essentially a wrapper of dir_struct with two more fields. However, as is_path_excluded also modifies dir_struct, it is not possible to e.g. use multiple path_exclude_check structures with the same dir_struct in parallel. The additional structure just unnecessarily complicates the API. Teach is_excluded / prep_exclude about ignored directories: whenever entering a new directory, first check if the entire directory is excluded. Remember the excluded state in dir_struct. Don't traverse into already ignored directories (i.e. don't read irrelevant .gitignore files). Directories could also be excluded by exclude patterns specified on the command line or .git/info/exclude, so we cannot simply skip prep_exclude entirely if there's no .gitignore file name (dir_struct.exclude_per_dir). Move this check to just before actually reading the file. is_path_excluded is now equivalent to is_excluded, so we can simply redirect to it (the public API is cleaned up in the next patch). The performance impact of the additional ignored check per directory is hardly noticeable when reading directories recursively (e.g. 'git status'). However, performance of git commands using the is_path_excluded API (e.g. 'git ls-files --cached --ignored --exclude-standard') is greatly improved as this no longer re-reads .gitignore files on each call. Here's some performance data from the linux and WebKit repos (best of 10 runs on a Debian Linux on SSD, core.preloadIndex=true): | ls-files -ci | status | status --ignored | linux | WebKit | linux | WebKit | linux | WebKit -------+-------+--------+-------+--------+-------+--------- before | 0.506 | 6.539 | 0.212 | 1.555 | 0.323 | 2.541 after | 0.080 | 1.191 | 0.218 | 1.583 | 0.321 | 2.579 gain | 6.325 | 5.490 | 0.972 | 0.982 | 1.006 | 0.985 Signed-off-by: Karsten Blees <blees@dcon.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-23Merge branch 'as/check-ignore'Libravatar Junio C Hamano1-11/+51
Add a new command "git check-ignore" for debugging .gitignore files. The variable names may want to get cleaned up but that can be done in-tree. * as/check-ignore: clean.c, ls-files.c: respect encapsulation of exclude_list_groups t0008: avoid brace expansion add git-check-ignore sub-command setup.c: document get_pathspec() add.c: extract new die_if_path_beyond_symlink() for reuse add.c: extract check_path_for_gitlink() from treat_gitlinks() for reuse pathspec.c: rename newly public functions for clarity add.c: move pathspec matchers into new pathspec.c for reuse add.c: remove unused argument from validate_pathspec() dir.c: improve docs for match_pathspec() and match_pathspec_depth() dir.c: provide clear_directory() for reclaiming dir_struct memory dir.c: keep track of where patterns came from dir.c: use a single struct exclude_list per source of excludes Conflicts: builtin/ls-files.c dir.c
2013-01-10Merge branch 'as/dir-c-cleanup'Libravatar Junio C Hamano1-10/+35
Refactor and generally clean up the directory traversal API implementation. * as/dir-c-cleanup: dir.c: rename free_excludes() to clear_exclude_list() dir.c: refactor is_path_excluded() dir.c: refactor is_excluded() dir.c: refactor is_excluded_from_list() dir.c: rename excluded() to is_excluded() dir.c: rename excluded_from_list() to is_excluded_from_list() dir.c: rename path_excluded() to is_path_excluded() dir.c: rename cryptic 'which' variable to more consistent name Improve documentation and comments regarding directory traversal API api-directory-listing.txt: update to match code
2013-01-06dir.c: improve docs for match_pathspec() and match_pathspec_depth()Libravatar Adam Spiers1-0/+6
Fix a grammatical issue in the description of these functions, and make it more obvious how and why seen[] can be reused across multiple invocations. Signed-off-by: Adam Spiers <git@adamspiers.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-06dir.c: provide clear_directory() for reclaiming dir_struct memoryLibravatar Adam Spiers1-0/+1
By the end of a directory traversal, a dir_struct instance will typically contains pointers to various data structures on the heap. clear_directory() provides a convenient way to reclaim that memory. Signed-off-by: Adam Spiers <git@adamspiers.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-06dir.c: keep track of where patterns came fromLibravatar Adam Spiers1-2/+19
For exclude patterns read in from files, the filename is stored in the exclude list, and the originating line number is stored in the individual exclude (counting starting at 1). For exclude patterns provided on the command line, a string describing the source of the patterns is stored in the exclude list, and the sequence number assigned to each exclude pattern is negative, with counting starting at -1. So for example the 2nd pattern provided via --exclude would be numbered -2. This allows any future consumers of that data to easily distinguish between exclude patterns from files vs. from the CLI. Signed-off-by: Adam Spiers <git@adamspiers.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-06dir.c: use a single struct exclude_list per source of excludesLibravatar Adam Spiers1-10/+26
Previously each exclude_list could potentially contain patterns from multiple sources. For example dir->exclude_list[EXC_FILE] would typically contain patterns from .git/info/exclude and core.excludesfile, and dir->exclude_list[EXC_DIRS] could contain patterns from multiple per-directory .gitignore files during directory traversal (i.e. when dir->exclude_stack was more than one item deep). We split these composite exclude_lists up into three groups of exclude_lists (EXC_CMDL / EXC_DIRS / EXC_FILE as before), so that each exclude_list now contains patterns from a single source. This will allow us to cleanly track the origin of each pattern simply by adding a src field to struct exclude_list, rather than to struct exclude, which would make memory management of the source string tricky in the EXC_DIRS case where its contents are dynamically generated. Similarly, by moving the filebuf member from struct exclude_stack to struct exclude_list, it allows us to track and subsequently free memory buffers allocated during the parsing of all exclude files, rather than only tracking buffers allocated for files in the EXC_DIRS group. Signed-off-by: Adam Spiers <git@adamspiers.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-28dir.c: rename free_excludes() to clear_exclude_list()Libravatar Adam Spiers1-1/+1
It is clearer to use a 'clear_' prefix for functions which empty and deallocate the contents of a data structure without freeing the structure itself, and a 'free_' prefix for functions which also free the structure itself. http://article.gmane.org/gmane.comp.version-control.git/206128 Signed-off-by: Adam Spiers <git@adamspiers.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-28dir.c: refactor is_path_excluded()Libravatar Adam Spiers1-0/+3
In a similar way to the previous commit, this extracts a new helper function last_exclude_matching_path() which return the last exclude_list element which matched, or NULL if no match was found. is_path_excluded() becomes a wrapper around this, and just returns 0 or 1 depending on whether any matching exclude_list element was found. This allows callers to find out _why_ a given path was excluded, rather than just whether it was or not, paving the way for a new git sub-command which allows users to test their exclude lists from the command line. Signed-off-by: Adam Spiers <git@adamspiers.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-28dir.c: rename excluded() to is_excluded()Libravatar Adam Spiers1-2/+2
Continue adopting clearer names for exclude functions. This is_* naming pattern for functions returning booleans was discussed here: http://thread.gmane.org/gmane.comp.version-control.git/204661/focus=204924 Signed-off-by: Adam Spiers <git@adamspiers.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-28dir.c: rename excluded_from_list() to is_excluded_from_list()Libravatar Adam Spiers1-2/+2
Continue adopting clearer names for exclude functions. This 'is_*' naming pattern for functions returning booleans was discussed here: http://thread.gmane.org/gmane.comp.version-control.git/204661/focus=204924 Also adjust their callers as necessary. Signed-off-by: Adam Spiers <git@adamspiers.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-28dir.c: rename path_excluded() to is_path_excluded()Libravatar Adam Spiers1-1/+1
Start adopting clearer names for exclude functions. This 'is_*' naming pattern for functions returning booleans was agreed here: http://thread.gmane.org/gmane.comp.version-control.git/204661/focus=204924 Signed-off-by: Adam Spiers <git@adamspiers.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-28dir.c: rename cryptic 'which' variable to more consistent nameLibravatar Adam Spiers1-2/+2
'el' is only *slightly* less cryptic, but is already used as the variable name for a struct exclude_list pointer in numerous other places, so this reduces the number of cryptic variable names in use by one :-) Signed-off-by: Adam Spiers <git@adamspiers.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-28Improve documentation and comments regarding directory traversal APILibravatar Adam Spiers1-2/+24
traversal API has a few potentially confusing properties. These comments clarify a few key aspects and will hopefully make it easier to understand for other newcomers in the future. Signed-off-by: Adam Spiers <git@adamspiers.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-11-26pathspec: apply "*.c" optimization from excludeLibravatar Nguyễn Thái Ngọc Duy1-0/+1
When a pattern contains only a single asterisk as wildcard, e.g. "foo*bar", after literally comparing the leading part "foo" with the string, we can compare the tail of the string and make sure it matches "bar", instead of running fnmatch() on "*bar" against the remainder of the string. -O2 build on linux-2.6, without the patch: $ time git rev-list --quiet HEAD -- '*.c' real 0m40.770s user 0m40.290s sys 0m0.256s With the patch $ time ~/w/git/git rev-list --quiet HEAD -- '*.c' real 0m34.288s user 0m33.997s sys 0m0.205s The above command is not supposed to be widely popular. It's chosen because it exercises pathspec matching a lot. The point is it cuts down matching time for popular patterns like *.c, which could be used as pathspec in other places. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-11-26pathspec: do exact comparison on the leading non-wildcard partLibravatar Nguyễn Thái Ngọc Duy1-0/+8
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-15attr: more matching optimizations from .gitignoreLibravatar Nguyễn Thái Ngọc Duy1-0/+11
.gitattributes and .gitignore share the same pattern syntax but has separate matching implementation. Over the years, ignore's implementation accumulates more optimizations while attr's stays the same. This patch reuses the core matching functions that are also used by excluded_from_list. excluded_from_list and path_matches can't be merged due to differences in exclude and attr, for example: * "!pattern" syntax is forbidden in .gitattributes. As an attribute can be unset (i.e. set to a special value "false") or made back to unspecified (i.e. not even set to "false"), "!pattern attr" is unclear which one it means. * we support attaching attributes to directories, but git-core internally does not currently make use of attributes on directories. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-15gitignore: make pattern parsing code a separate functionLibravatar Nguyễn Thái Ngọc Duy1-1/+1
This function can later be reused by attr.c. Also turn to_exclude field into a flag. Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-05Merge commit 'f9f6e2c' into nd/attr-match-optim-moreLibravatar Junio C Hamano1-1/+1
* commit 'f9f6e2c': exclude: do strcmp as much as possible before fnmatch dir.c: get rid of the wildcard symbol set in no_wildcard() Unindent excluded_from_list()
2012-07-11Merge branch 'jc/ls-files-i-dir' into maintLibravatar Junio C Hamano1-1/+17
"git ls-files --exclude=t -i" did not consider anything under t/ as excluded, as it did not pay attention to exclusion of leading paths while walking the index. Other two users of excluded() are also updated. * jc/ls-files-i-dir: dir.c: make excluded() file scope static unpack-trees.c: use path_excluded() in check_ok_to_remove() builtin/add.c: use path_excluded() path_excluded(): update API to less cache-entry centric ls-files -i: micro-optimize path_excluded() ls-files -i: pay attention to exclusion of leading paths
2012-06-07exclude: do strcmp as much as possible before fnmatchLibravatar Nguyễn Thái Ngọc Duy1-1/+1
this also avoids calling fnmatch() if the non-wildcard prefix is longer than basename Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-05dir.c: make excluded() file scope staticLibravatar Junio C Hamano1-1/+0
Now there no longer is external callers of this interface, so we can make it static. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-05path_excluded(): update API to less cache-entry centricLibravatar Junio C Hamano1-1/+2
It was stupid of me to make the API too much cache-entry specific; the caller may want to check arbitrary pathname without having a corresponding cache-entry to see if a path is ignored. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-03ls-files -i: pay attention to exclusion of leading pathsLibravatar Junio C Hamano1-0/+16
"git ls-files --exclude=t/ -i" does not show paths in directory t/ that have been added to the index, but it should. The excluded() API was designed for callers who walk the tree from the top, checking each level of the directory hierarchy as it descends if it is excluded, and not even bothering to recurse into an excluded directory. This would allow us optimize for a common case by not having to check if the exclude pattern "foo/" matches when looking at "foo/bar", because the caller should have noticed that "foo" is excluded and did not even bother to read "foo/bar" out of opendir()/readdir() to call it. The code for "ls-files -i" however walks the index linearly, feeding paths without checking if the leading directory is already excluded. Introduce a helper function path_excluded() to let this caller properly call excluded() check for higher hierarchies as necessary. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-15remove_dir_recursively(): Add flag for skipping removal of toplevel dirLibravatar Junio C Hamano1-0/+1
Add the REMOVE_DIR_KEEP_TOPLEVEL flag to remove_dir_recursively() for deleting everything inside the given directory, but _not_ the given directory itself. Note that this does not pass the REMOVE_DIR_KEEP_NESTED_GIT flag, if set, to the recursive invocations of remove_dir_recursively(). It is likely to be a a bug that has been present since REMOVE_DIR_KEEP_NESTED_GIT was introduced (a0f4afb), but this commit keeps the same behaviour for now. Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-12rename pathspec_prefix() to common_prefix() and move to dir.[ch]Libravatar Clemens Buchacher1-1/+1
Also make common_prefix_len() static as this refactoring makes dir.c itself the only caller of this helper function. Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-06consolidate pathspec_prefix and common_prefixLibravatar Junio C Hamano1-0/+1
The implementation from pathspec_prefix (slightly modified) replaces the current common_prefix, because it also respects glob characters. Based on a patch by Clemens Buchacher. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-02Merge branch 'nd/maint-setup'Libravatar Junio C Hamano1-1/+1
* nd/maint-setup: Kill off get_relative_cwd() setup: return correct prefix if worktree is '/' Conflicts: dir.c setup.c
2011-03-28Kill off get_relative_cwd()Libravatar Nguyễn Thái Ngọc Duy1-1/+0
Function dir_inside_of() does something similar (correctly), but looks easier to understand and does not bundle cwd to its business. Given get_relative_cwd's only user is is_inside_dir, we can kill it for good. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-28setup: return correct prefix if worktree is '/'Libravatar Nguyễn Thái Ngọc Duy1-0/+1
The same old problem reappears after setup code is reworked. We tend to assume there is at least one path component in a path and forget that path can be simply '/'. Reported-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-03pathspec: add match_pathspec_depth()Libravatar Nguyễn Thái Ngọc Duy1-0/+3
match_pathspec_depth() is a clone of match_pathspec() except that it can take depth limit. Computation is a bit lighter compared to match_pathspec() because it's usually precomputed and stored in struct pathspec. In long term, match_pathspec() and match_one() should be removed in favor of this function. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-03tree_entry_interesting(): support depth limitLibravatar Nguyễn Thái Ngọc Duy1-0/+1
This is needed to replace pathspec_matches() in builtin/grep.c. max_depth == -1 means infinite depth. Depth limit is only effective when pathspec.recursive == 1. When pathspec.recursive == 0, the behavior depends on match functions: non-recursive for tree_entry_interesting() and recursive for match_pathspec{,_depth} Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-22Merge branch 'nd/maint-fix-add-typo-detection'Libravatar Junio C Hamano1-0/+1
* nd/maint-fix-add-typo-detection: Revert "excluded_1(): support exclude files in index" unpack-trees: fix sparse checkout's "unable to match directories" unpack-trees: move all skip-worktree checks back to unpack_trees() dir.c: add free_excludes() cache.h: realign and use (1 << x) form for CE_* constants
2010-11-29dir.c: add free_excludes()Libravatar Nguyễn Thái Ngọc Duy1-0/+1
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-06Add string comparison functions that respect the ignore_case variable.Libravatar Joshua Jensen1-0/+4
Multiple locations within this patch series alter a case sensitive string comparison call such as strcmp() to be a call to a string comparison call that selects case comparison based on the global ignore_case variable. Behaviorally, when core.ignorecase=false, the *_icase() versions are functionally equivalent to their C runtime counterparts. When core.ignorecase=true, the *_icase() versions perform a case insensitive comparison. Like Linus' earlier ignorecase patch, these may ignore filename conventions on certain file systems. By isolating filename comparisons to certain functions, support for those filename conventions may be more easily met. Signed-off-by: Joshua Jensen <jjensen@workspacewhiz.com> Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-12git add: Add the "--ignore-missing" option for the dry runLibravatar Jens Lehmann1-0/+1
Sometimes it is useful to know if a file or directory will be ignored before it is added to the work tree. An example is "git submodule add", where it would be really nice to be able to fail with an appropriate error message before the submodule is cloned and checked out. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-13Merge branch 'nd/sparse'Libravatar Junio C Hamano1-0/+4
* nd/sparse: (25 commits) t7002: test for not using external grep on skip-worktree paths t7002: set test prerequisite "external-grep" if supported grep: do not do external grep on skip-worktree entries commit: correctly respect skip-worktree bit ie_match_stat(): do not ignore skip-worktree bit with CE_MATCH_IGNORE_VALID tests: rename duplicate t1009 sparse checkout: inhibit empty worktree Add tests for sparse checkout read-tree: add --no-sparse-checkout to disable sparse checkout support unpack-trees(): ignore worktree check outside checkout area unpack_trees(): apply $GIT_DIR/info/sparse-checkout to the final index unpack-trees(): "enable" sparse checkout and load $GIT_DIR/info/sparse-checkout unpack-trees.c: generalize verify_* functions unpack-trees(): add CE_WT_REMOVE to remove on worktree alone Introduce "sparse checkout" dir.c: export excluded_1() and add_excludes_from_file_1() excluded_1(): support exclude files in index unpack-trees(): carry skip-worktree bit over in merged_entry() Read .gitignore from index if it is skip-worktree Avoid writing to buffer in add_excludes_from_file_1() ... Conflicts: .gitignore Documentation/config.txt Documentation/git-update-index.txt Makefile entry.c t/t7002-grep.sh
2009-08-23dir.c: export excluded_1() and add_excludes_from_file_1()Libravatar Nguyễn Thái Ngọc Duy1-0/+4
These functions are used to handle .gitignore. They are now exported so that sparse checkout can reuse. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-29clean: require double -f options to nuke nested git repository and work treeLibravatar Junio C Hamano1-1/+4
When you have an embedded git work tree in your work tree (be it an orphaned submodule, or an independent checkout of an unrelated project), "git clean -d -f" blindly descended into it and removed everything. This is rarely what the user wants. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-09Simplify read_directory[_recursive]() argumentsLibravatar Linus Torvalds1-1/+1
Stop the insanity with separate 'path' and 'base' arguments that must match. We don't need that crazy interface any more, since we cleaned up handling of 'path' in commit da4b3e8c28b1dc2b856d2555ac7bb47ab712598c. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-09Add 'fill_directory()' helper function for directory traversalLibravatar Linus Torvalds1-2/+1
Most of the users of "read_directory()" actually want a much simpler interface than the whole complex (but rather powerful) one. In fact 'git add' had already largely abstracted out the core interface issues into a private "fill_directory()" function that was largely applicable almost as-is to a number of callers. Yes, 'git add' wants to do some extra work of its own, specific to the add semantics, but we can easily split that out, and use the core as a generic function. This function does exactly that, and now that much simplified 'fill_directory()' function can be shared with a number of callers, while also ensuring that the rather more complex calling conventions of read_directory() are used by fewer call-sites. This also makes the 'common_prefix()' helper function private to dir.c, since all callers are now in that file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>