| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
It was largely replaced by fnmatch_icase_mem() and its last use was in
84b8b5d (remove match_pathspec() in favor of match_pathspec_depth() -
2013-07-14).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* ss/exc-flag-is-a-collection-of-bits:
dir: store EXC_FLAG_* values in unsigned integers
|
|
This reverts commit 5e57f9c3dfe7dd44a1b56bb5b3327d7a1356ec7c, reversing
changes made to e79112d21024beb997951381db21a70b087d459d.
We will be postponing nd/exclusion-regression-fix topic to later
cycle.
|
|
The values defined by the macro EXC_FLAG_* (1, 4, 8, 16) are stored
in fields of the structs "pattern" and "exclude", some functions
arguments and a local variable. None of these uses its most
significant bit in any special way and there is no good reason to
use a signed integer for them.
And while we're at it, document "flags" of "exclude" to explicitly
state the values it's supposed to take on.
Signed-off-by: Saurav Sachidanand <sauravsachidanand@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Given path "a" and the pattern "a", it's matched. But if we throw path
"a/b" to pattern "a", the code fails to realize that if "a" matches
"a" then "a/b" should also be matched.
When the pattern is matched the first time, we can mark it "sticky", so
that all files and dirs inside the matched path also matches. This is a
simpler solution than modify all match scenarios to fix that.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is not a good idea to compare kernel versions and disable
the untracked cache if it changes, as people may upgrade and
still want the untracked cache to work. So let's just
compare work tree locations and kernel name to decide if we
should disable it.
Also storing many locations in the ident field and comparing
to any of them can be dangerous if GIT_WORK_TREE is used with
different values. So let's just store one location, the
location of the current work tree.
The downside is that untracked cache can only be used by one
type of OS for now. Exporting a git repo to different clients
via a network to e.g. Linux and Windows means that only one
can use the untracked cache.
If the location changed in the ident field and we still want
an untracked cache, let's delete the cache and recreate it.
Note that if an untracked cache has been created by a
previous Git version, then the kernel version is stored in
the ident field. As we now compare with just the kernel
name the comparison will fail and the untracked cache will
be disabled until it's recreated.
Helped-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Factor out code into remove_untracked_cache(), which will be used
in a later commit.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Factor out code into new_untracked_cache() and
add_untracked_cache(), which will be used
in later commits.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach the index to optionally remember already seen untracked files
to speed up "git status" in a working tree with tons of cruft.
* nd/untracked-cache: (24 commits)
git-status.txt: advertisement for untracked cache
untracked cache: guard and disable on system changes
mingw32: add uname()
t7063: tests for untracked cache
update-index: test the system before enabling untracked cache
update-index: manually enable or disable untracked cache
status: enable untracked cache
untracked-cache: temporarily disable with $GIT_DISABLE_UNTRACKED_CACHE
untracked cache: mark index dirty if untracked cache is updated
untracked cache: print stats with $GIT_TRACE_UNTRACKED_STATS
untracked cache: avoid racy timestamps
read-cache.c: split racy stat test to a separate function
untracked cache: invalidate at index addition or removal
untracked cache: load from UNTR index extension
untracked cache: save to an index extension
ewah: add convenient wrapper ewah_serialize_strbuf()
untracked cache: don't open non-existent .gitignore
untracked cache: mark what dirs should be recursed/saved
untracked cache: record/validate dir mtime and reuse cached output
untracked cache: make a wrapper around {open,read,close}dir()
...
|
|
Code clean-up.
* jc/report-path-error-to-dir:
report_path_error(): move to dir.c
|
|
The expected call sequence is for the caller to use match_pathspec()
repeatedly on a set of pathspecs, accumulating the "hits" in a
separate array, and then call this function to diagnose a pathspec
that never matched anything, as that can indicate a typo from the
command line, e.g. "git commit Maekfile".
Many builtin commands use this function from builtin/ls-files.c,
which is not a very healthy arrangement. ls-files might have been
the first command to feel the need for such a helper, but the need
is shared by everybody who uses the "match and then report" pattern.
Move it to dir.c where match_pathspec() is defined.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the user enables untracked cache, then
- move worktree to an unsupported filesystem
- or simply upgrade OS
- or move the whole (portable) disk from one machine to another
- or access a shared fs from another machine
there's no guarantee that untracked cache can still function properly.
Record the worktree location and OS footprint in the cache. If it
changes, err on the safe side and disable the cache. The user can
'update-index --untracked-cache' again to make sure all conditions are
met.
This adds a new requirement that setup_git_directory* must be called
before read_cache() because we need worktree location by then, or the
cache is dropped.
This change does not cover all bases, you can fool it if you try
hard. The point is to stop accidents.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Helped-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ideally we should implement untracked_cache_remove_from_index() and
untracked_cache_add_to_index() so that they update untracked cache
right away instead of invalidating it and wait for read_directory()
next time to deal with it. But that may need some more work in
unpack-trees.c. So stay simple as the first step.
The new call in add_index_entry_with_check() may look strange because
new calls usually stay close to cache_tree_invalidate_path(). We do it
a bit later than c_t_i_p() in this function because if it's about
replacing the entry with the same name, we don't care (but cache-tree
does).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we redo this thing in a functional style, we would have one struct
untracked_dir as input tree and another as output. The input is used
for verification. The output is a brand new tree, reflecting current
worktree.
But that means recreate a lot of dir nodes even if a lot could be
shared between input and output trees in good cases. So we go with the
messy but efficient way, combining both input and output trees into
one. We need a way to know which node in this combined tree belongs to
the output. This is the purpose of this "recurse" flag.
"valid" bit can't be used for this because it's about data of the node
except the subdirs. When we invalidate a directory, we want to keep
cached data of the subdirs intact even though we don't really know
what subdir still exists (yet). Then we check worktree to see what
actual subdir remains on disk. Those will have 'recurse' bit set
again. If cached data for those are still valid, we may be able to
avoid computing exclude files for them. Those subdirs that are deleted
will have 'recurse' remained clear and their 'valid' bits do not
matter.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The main readdir loop in read_directory_recursive() is replaced with a
new one that checks if cached results of a directory is still valid.
If a file is added or removed from the index, the containing directory
is invalidated (but not its subdirs). If directory's mtime is changed,
the same happens. If a .gitignore is updated, the containing directory
and all subdirs are invalidated recursively. If dir_struct#flags or
other conditions change, the cache is ignored.
If a directory is invalidated, we opendir/readdir/closedir and run the
exclude machinery on that directory listing as usual. If untracked
cache is also enabled, we'll update the cache along the way. If a
directory is validated, we simply pull the untracked listing out from
the cache. The cache also records the list of direct subdirs that we
have to recurse in. Fully excluded directories are seen as "untracked
files".
In the best case when no dirs are invalidated, read_directory()
becomes a series of
stat(dir), open(.gitignore), fstat(), read(), close() and optionally
hash_sha1_file()
For comparison, standard read_directory() is a sequence of
opendir(), readdir(), open(.gitignore), fstat(), read(), close(), the
expensive last_exclude_matching() and closedir().
We already try not to open(.gitignore) if we know it does not exist,
so open/fstat/read/close sequence does not apply to every
directory. The sequence could be reduced further, as noted in
prep_exclude() in another patch. So in theory, the entire best-case
read_directory sequence could be reduced to a series of stat() and
nothing else.
This is not a silver bullet approach. When you compile a C file, for
example, the old .o file is removed and a new one with the same name
created, effectively invalidating the containing directory's cache
(but not its subdirectories). If your build process touches every
directory, this cache adds extra overhead for nothing, so it's a good
idea to separate generated files from tracked files.. Editors may use
the same strategy for saving files. And of course you're out of luck
running your repo on an unsupported filesystem and/or operating system.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make sure the starting conditions and all global exclude files are
good to go. If not, either disable untracked cache completely, or wipe
out the cache and start fresh.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The idea is if we can capture all input and (non-rescursive) output of
read_directory_recursive(), and can verify later that all the input is
the same, then the second r_d_r() should produce the same output as in
the first run.
The requirement for this to work is stat info of a directory MUST
change if an entry is added to or removed from that directory (and
should not change often otherwise). If your OS and filesystem do not
meet this requirement, untracked cache is not for you. Most file
systems on *nix should be fine. On Windows, NTFS is fine while FAT may
not be [1] even though FAT on Linux seems to be fine.
The list of input of r_d_r() is in the big comment block in dir.h. In
short, the output of a directory (not counting subdirs) mainly depends
on stat info of the directory in question, all .gitignore leading to
it and the check_only flag when r_d_r() is called recursively. This
patch records all this info (and the output) as r_d_r() runs.
Two hash_sha1_file() are required for $GIT_DIR/info/exclude and
core.excludesfile unless their stat data matches. hash_sha1_file() is
only needed when .gitignore files in the worktree are modified,
otherwise their SHA-1 in index is used (see the previous patch).
We could store stat data for .gitignore files so we don't have to
rehash them if their content is different from index, but I think
.gitignore files are rarely modified, so not worth extra cache data
(and hashing penalty read-cache.c:verify_hdr(), as we will be storing
this as an index extension).
The implication is, if you change .gitignore, you better add it to the
index soon or you lose all the benefit of untracked cache because a
modified .gitignore invalidates all subdirs recursively. This is
especially bad for .gitignore at root.
This cached output is about untracked files only, not ignored files
because the number of tracked files is usually small, so small cache
overhead, while the number of ignored files could go really high
(e.g. *.o files mixing with source code).
[1] "Description of NTFS date and time stamps for files and folders"
http://support.microsoft.com/kb/299648
Helped-by: Torsten Bögershausen <tboegi@web.de>
Helped-by: David Turner <dturner@twopensource.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is not used anywhere yet. But the goal is to compare quickly if a
.gitignore file has changed when we have the SHA-1 of both old (cached
somewhere) and new (from index or a tree) versions.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes a segfault in git-status with long paths on Windows,
where PATH_MAX is only 260.
This also fixes the problem of silently ignoring .gitignore if the
full path exceeds PATH_MAX. Now add_excludes_from_file() will report
if it gets ENAMETOOLONG.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is no actual nested struct here. Move it out for clarity.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch activates the DO_MATCH_DIRECTORY code in m_p_i(), which
makes "git diff HEAD submodule/" and "git diff HEAD submodule" produce
the same output. Previously only the version without trailing slash
returns the difference (if any).
That's the effect of new ce_path_match(). dir_path_match() is not
executed by the new tests. And it should not introduce regressions.
Previously if path "dir/" is passed in with pathspec "dir/", they
obviously match. With new dir_path_match(), the path becomes
_directory_ "dir" vs pathspec "dir/", which is not executed by the old
code path in m_p_i(). The new code path is executed and produces the
same result.
The other case is pathspec "dir" and path "dir/" is now turned to
"dir" (with DO_MATCH_DIRECTORY). Still the same result before or after
the patch.
So why change? Because of the next patch about clean.c.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A long time ago, for some reason I was not happy with
match_pathspec(). I created a better version, match_pathspec_depth()
that was suppose to replace match_pathspec()
eventually. match_pathspec() has finally been gone since 6 months
ago. Use the shorter name for match_pathspec_depth().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This helps reduce the number of match_pathspec_depth() call sites and
show how m_p_d() is used. And it usage is:
- match against an index entry (ce_path_match or match_pathspec_depth
in ls-files)
- match against a dir_entry from read_directory (dir_path_match and
match_pathspec_depth in clean.c, which will be converted later)
- resolve-undo (rerere.c and ls-files.c)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This helps reduce the number of match_pathspec_depth() call sites and
show how match_pathspec_depth() is used.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git ls-files -k" needs to crawl only the part of the working tree
that may overlap the paths in the index to find killed files, but
shared code with the logic to find all the untracked files, which
made it unnecessarily inefficient.
* jc/ls-files-killed-optim:
dir.c::test_one_path(): work around directory_exists_in_index_icase() breakage
t3010: update to demonstrate "ls-files -k" optimization pitfalls
ls-files -k: a directory only can be killed if the index has a non-directory
dir.c: use the cache_* macro to access the current index
|
|
"ls-files -o" and "ls-files -k" both traverse the working tree down
to find either all untracked paths or those that will be "killed"
(removed from the working tree to make room) when the paths recorded
in the index are checked out. It is necessary to traverse the
working tree fully when enumerating all the "other" paths, but when
we are only interested in "killed" paths, we can take advantage of
the fact that paths that do not overlap with entries in the index
can never be killed.
The treat_one_path() helper function, which is called during the
recursive traversal, is the ideal place to implement an
optimization.
When we are looking at a directory P in the working tree, there are
three cases:
(1) P exists in the index. Everything inside the directory P in
the working tree needs to go when P is checked out from the
index.
(2) P does not exist in the index, but there is P/Q in the index.
We know P will stay a directory when we check out the contents
of the index, but we do not know yet if there is a directory
P/Q in the working tree to be killed, so we need to recurse.
(3) P does not exist in the index, and there is no P/Q in the index
to require P to be a directory, either. Only in this case, we
know that everything inside P will not be killed without
recursing.
Note that this helper is called by treat_leading_path() that decides
if we need to traverse only subdirectories of a single common
leading directory, which is essential for this optimization to be
correct. This caller checks each level of the leading path
component from shallower directory to deeper ones, and that is what
allows us to only check if the path appears in the index. If the
call to treat_one_path() weren't there, given a path P/Q/R, the real
traversal may start from directory P/Q/R, even when the index
records P as a regular file, and we would end up having to check if
any leading subpath in P/Q/R, e.g. P, appears in the index.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
:(glob)path differs from plain pathspec that it uses wildmatch with
WM_PATHNAME while the other uses fnmatch without FNM_PATHNAME. The
difference lies in how '*' (and '**') is processed.
With the introduction of :(glob) and :(literal) and their global
options --[no]glob-pathspecs, the user can:
- make everything literal by default via --noglob-pathspecs
--literal-pathspecs cannot be used for this purpose as it
disables _all_ pathspec magic.
- individually turn on globbing with :(glob)
- make everything globbing by default via --glob-pathspecs
- individually turn off globbing with :(literal)
The implication behind this is, there is no way to gain the default
matching behavior (i.e. fnmatch without FNM_PATHNAME). You either get
new globbing or literal. The old fnmatch behavior is considered
deprecated and discouraged to use.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
match_pathspec_depth was created to replace match_pathspec (see
61cf282 (pathspec: add match_pathspec_depth() - 2010-12-15). It took
more than two years, but the replacement finally happens :-)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code now takes advantage of nowildcard_len field.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently to fill a struct pathspec, we do:
const char **paths;
paths = get_pathspec(prefix, argv);
...
init_pathspec(&pathspec, paths);
"paths" can only carry bare strings, which loses information from
command line arguments such as pathspec magic or the prefix part's
length for each argument.
parse_pathspec() is introduced to combine the two calls into one. The
plan is gradually replace all get_pathspec() and init_pathspec() with
parse_pathspec(). get_pathspec() now becomes a thin wrapper of
parse_pathspec().
parse_pathspec() allows the caller to reject the pathspec magics that
it does not support. When a new pathspec magic is introduced, we can
enable it per command after making sure that all underlying code has no
problem with the new magic.
"flags" parameter is currently unused. But it would allow callers to
pass certain instructions to parse_pathspec, for example forcing
literal pathspec when no magic is used.
With the introduction of parse_pathspec, there are now two functions
that can initialize struct pathspec: init_pathspec and
parse_pathspec. Any semantic changes in struct pathspec must be
reflected in both functions. init_pathspec() will be phased out in
favor of parse_pathspec().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git-status --ignored' still scans the work tree twice to collect
untracked and ignored files, respectively.
fill_directory / read_directory already supports collecting untracked and
ignored files in a single directory scan. However, the DIR_COLLECT_IGNORED
flag to enable this has some git-add specific side-effects (e.g. it
doesn't recurse into ignored directories, so listing ignored files with
--untracked=all doesn't work).
The DIR_SHOW_IGNORED flag doesn't list untracked files and returns ignored
files in dir_struct.entries[] (instead of dir_struct.ignored[] as
DIR_COLLECT_IGNORED). DIR_SHOW_IGNORED is used all throughout git.
We don't want to break the existing API, so lets introduce a new flag
DIR_SHOW_IGNORED_TOO that lists untracked as well as ignored files similar
to DIR_COLLECT_FILES, but will recurse into sub-directories based on the
other flags as DIR_SHOW_IGNORED does.
In dir.c::read_directory_recursive, add ignored files to either
dir_struct.entries[] or dir_struct.ignored[] based on the flags. Also move
the DIR_COLLECT_IGNORED case here so that filling result lists is in a
common place.
In wt-status.c::wt_status_collect_untracked, use the new flag and read
results from dir_struct.ignored[]. Remove the extra fill_directory call.
builtin/check-ignore.c doesn't call fill_directory, setting the git-add
specific DIR_COLLECT_IGNORED flag has no effect here. Remove for clarity.
Update API documentation to reflect the changes.
Performance: with this patch, 'git-status --ignored' is typically as fast
as 'git-status'.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The is_excluded and is_path_excluded APIs are very similar, except for a
few noteworthy differences:
is_excluded doesn't handle ignored directories, results for paths within
ignored directories are incorrect. This is probably based on the premise
that recursive directory scans should stop at ignored directories, which
is no longer true (in certain cases, read_directory_recursive currently
calls is_excluded *and* is_path_excluded to get correct ignored state).
is_excluded caches parsed .gitignore files of the last directory in struct
dir_struct. If the directory changes, it finds a common parent directory
and is very careful to drop only as much state as necessary. On the other
hand, is_excluded will also read and parse .gitignore files in already
ignored directories, which are completely irrelevant.
is_path_excluded correctly handles ignored directories by checking if any
component in the path is excluded. As it uses is_excluded internally, this
unfortunately forces is_excluded to drop and re-read all .gitignore files,
as there is no common parent directory for the root dir.
is_path_excluded tracks state in a separate struct path_exclude_check,
which is essentially a wrapper of dir_struct with two more fields. However,
as is_path_excluded also modifies dir_struct, it is not possible to e.g.
use multiple path_exclude_check structures with the same dir_struct in
parallel. The additional structure just unnecessarily complicates the API.
Teach is_excluded / prep_exclude about ignored directories: whenever
entering a new directory, first check if the entire directory is excluded.
Remember the excluded state in dir_struct. Don't traverse into already
ignored directories (i.e. don't read irrelevant .gitignore files).
Directories could also be excluded by exclude patterns specified on the
command line or .git/info/exclude, so we cannot simply skip prep_exclude
entirely if there's no .gitignore file name (dir_struct.exclude_per_dir).
Move this check to just before actually reading the file.
is_path_excluded is now equivalent to is_excluded, so we can simply
redirect to it (the public API is cleaned up in the next patch).
The performance impact of the additional ignored check per directory is
hardly noticeable when reading directories recursively (e.g. 'git status').
However, performance of git commands using the is_path_excluded API (e.g.
'git ls-files --cached --ignored --exclude-standard') is greatly improved
as this no longer re-reads .gitignore files on each call.
Here's some performance data from the linux and WebKit repos (best of 10
runs on a Debian Linux on SSD, core.preloadIndex=true):
| ls-files -ci | status | status --ignored
| linux | WebKit | linux | WebKit | linux | WebKit
-------+-------+--------+-------+--------+-------+---------
before | 0.506 | 6.539 | 0.212 | 1.555 | 0.323 | 2.541
after | 0.080 | 1.191 | 0.218 | 1.583 | 0.321 | 2.579
gain | 6.325 | 5.490 | 0.972 | 0.982 | 1.006 | 0.985
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a new command "git check-ignore" for debugging .gitignore
files.
The variable names may want to get cleaned up but that can be done
in-tree.
* as/check-ignore:
clean.c, ls-files.c: respect encapsulation of exclude_list_groups
t0008: avoid brace expansion
add git-check-ignore sub-command
setup.c: document get_pathspec()
add.c: extract new die_if_path_beyond_symlink() for reuse
add.c: extract check_path_for_gitlink() from treat_gitlinks() for reuse
pathspec.c: rename newly public functions for clarity
add.c: move pathspec matchers into new pathspec.c for reuse
add.c: remove unused argument from validate_pathspec()
dir.c: improve docs for match_pathspec() and match_pathspec_depth()
dir.c: provide clear_directory() for reclaiming dir_struct memory
dir.c: keep track of where patterns came from
dir.c: use a single struct exclude_list per source of excludes
Conflicts:
builtin/ls-files.c
dir.c
|
|
Refactor and generally clean up the directory traversal API
implementation.
* as/dir-c-cleanup:
dir.c: rename free_excludes() to clear_exclude_list()
dir.c: refactor is_path_excluded()
dir.c: refactor is_excluded()
dir.c: refactor is_excluded_from_list()
dir.c: rename excluded() to is_excluded()
dir.c: rename excluded_from_list() to is_excluded_from_list()
dir.c: rename path_excluded() to is_path_excluded()
dir.c: rename cryptic 'which' variable to more consistent name
Improve documentation and comments regarding directory traversal API
api-directory-listing.txt: update to match code
|
|
Fix a grammatical issue in the description of these functions, and
make it more obvious how and why seen[] can be reused across multiple
invocations.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By the end of a directory traversal, a dir_struct instance will
typically contains pointers to various data structures on the heap.
clear_directory() provides a convenient way to reclaim that memory.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For exclude patterns read in from files, the filename is stored in the
exclude list, and the originating line number is stored in the
individual exclude (counting starting at 1).
For exclude patterns provided on the command line, a string describing
the source of the patterns is stored in the exclude list, and the
sequence number assigned to each exclude pattern is negative, with
counting starting at -1. So for example the 2nd pattern provided via
--exclude would be numbered -2. This allows any future consumers of
that data to easily distinguish between exclude patterns from files
vs. from the CLI.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously each exclude_list could potentially contain patterns
from multiple sources. For example dir->exclude_list[EXC_FILE]
would typically contain patterns from .git/info/exclude and
core.excludesfile, and dir->exclude_list[EXC_DIRS] could contain
patterns from multiple per-directory .gitignore files during
directory traversal (i.e. when dir->exclude_stack was more than
one item deep).
We split these composite exclude_lists up into three groups of
exclude_lists (EXC_CMDL / EXC_DIRS / EXC_FILE as before), so that each
exclude_list now contains patterns from a single source. This will
allow us to cleanly track the origin of each pattern simply by adding
a src field to struct exclude_list, rather than to struct exclude,
which would make memory management of the source string tricky in the
EXC_DIRS case where its contents are dynamically generated.
Similarly, by moving the filebuf member from struct exclude_stack to
struct exclude_list, it allows us to track and subsequently free
memory buffers allocated during the parsing of all exclude files,
rather than only tracking buffers allocated for files in the EXC_DIRS
group.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is clearer to use a 'clear_' prefix for functions which empty
and deallocate the contents of a data structure without freeing
the structure itself, and a 'free_' prefix for functions which
also free the structure itself.
http://article.gmane.org/gmane.comp.version-control.git/206128
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a similar way to the previous commit, this extracts a new helper
function last_exclude_matching_path() which return the last
exclude_list element which matched, or NULL if no match was found.
is_path_excluded() becomes a wrapper around this, and just returns 0
or 1 depending on whether any matching exclude_list element was found.
This allows callers to find out _why_ a given path was excluded,
rather than just whether it was or not, paving the way for a new git
sub-command which allows users to test their exclude lists from the
command line.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Continue adopting clearer names for exclude functions. This is_*
naming pattern for functions returning booleans was discussed here:
http://thread.gmane.org/gmane.comp.version-control.git/204661/focus=204924
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Continue adopting clearer names for exclude functions. This 'is_*'
naming pattern for functions returning booleans was discussed here:
http://thread.gmane.org/gmane.comp.version-control.git/204661/focus=204924
Also adjust their callers as necessary.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Start adopting clearer names for exclude functions. This 'is_*'
naming pattern for functions returning booleans was agreed here:
http://thread.gmane.org/gmane.comp.version-control.git/204661/focus=204924
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'el' is only *slightly* less cryptic, but is already used as the
variable name for a struct exclude_list pointer in numerous other
places, so this reduces the number of cryptic variable names in use by
one :-)
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
traversal API has a few potentially confusing properties. These
comments clarify a few key aspects and will hopefully make it easier
to understand for other newcomers in the future.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a pattern contains only a single asterisk as wildcard,
e.g. "foo*bar", after literally comparing the leading part "foo" with
the string, we can compare the tail of the string and make sure it
matches "bar", instead of running fnmatch() on "*bar" against the
remainder of the string.
-O2 build on linux-2.6, without the patch:
$ time git rev-list --quiet HEAD -- '*.c'
real 0m40.770s
user 0m40.290s
sys 0m0.256s
With the patch
$ time ~/w/git/git rev-list --quiet HEAD -- '*.c'
real 0m34.288s
user 0m33.997s
sys 0m0.205s
The above command is not supposed to be widely popular. It's chosen
because it exercises pathspec matching a lot. The point is it cuts
down matching time for popular patterns like *.c, which could be used
as pathspec in other places.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Nguyễn Thái Ngọc Duy
Junio C Hamano
Saurav Sachidanand
Christian Couder
Karsten Blees
Adam Spiers