| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Regression fix for 2.34
* ds/add-rm-with-sparse-index:
dir: revert "dir: select directories correctly"
|
|
This reverts commit f6526728f950cacfd5b5e42bcc65f2c47f3da654.
The change in f652672 (dir: select directories correctly, 2021-09-24)
caused a regression in directory-based matches with non-cone-mode
patterns, especially for .gitignore patterns. A test is included to
prevent this regression in the future.
The commit ed495847 (dir: fix pattern matching on dirs, 2021-09-24) was
reverted in 5ceb663 (dir: fix directory-matching bug, 2021-11-02) for
similar reasons. Neither commit changed tests, and tests added later in
the series continue to pass when these commits are reverted.
Reported-by: Danial Alihosseini <danial.alihosseini@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Regression fix.
* ds/add-rm-with-sparse-index:
dir: fix directory-matching bug
|
|
This reverts the change from ed49584 (dir: fix pattern matching on dirs,
2021-09-24), which claimed to fix a directory-matching problem without a
test case. It turns out to _create_ a bug, but it is a bit subtle.
The bug would have been revealed by the first of two tests being added to
t0008-ignores.sh. The first uses a pattern "/git/" inside the a/.gitignores
file, which matches against 'a/git/foo' but not 'a/git-foo/bar'. This test
would fail before the revert.
The second test shows what happens if the test instead uses a pattern "git/"
and this test passes both before and after the revert.
The difference in these two cases are due to how
last_matching_pattern_from_list() checks patterns both if they have the
PATTERN_FLAG_MUSTBEDIR and PATTERN_FLAG_NODIR flags. In the case of "git/",
the PATTERN_FLAG_NODIR is also provided, making the change in behavior in
match_pathname() not affect the end result of
last_matching_pattern_from_list().
Reported-by: Glen Choo <chooglen@google.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix-up to a topic already merged to 'master'.
* mt/fix-add-rm-with-sparse-index:
add, rm, mv: fix bug that prevents the update of non-sparse dirs
|
|
These three commands recently learned to avoid updating paths outside
the sparse checkout even if they are missing the SKIP_WORKTREE bit. This
is done using path_in_sparse_checkout(), which checks whether a given
path matches the current list of sparsity rules, similar to what
clear_ce_flags() does when we run "git sparse checkout init" or "git
sparse-checkout reapply". However, clear_ce_flags() uses a recursive
approach, applying the match results from parent directories on paths
that get the UNDECIDED result, whereas path_in_sparse_checkout() only
attempts to match the full path and immediately considers UNDECIDED as
NOT_MATCHED. This makes the function miss matches with leading
directories. For example, if the user has the sparsity patterns "!/a"
and "b/", add, rm, and mv will fail to update the path "a/b/c" and end
up displaying a warning about it being outside the sparse checkout even
though it isn't. This problem only occurs in full pattern mode as the
pattern matching functions never return UNDECIDED for cone mode.
To fix this, replicate the recursive behavior of clear_ce_flags() in
path_in_sparse_checkout(), falling back to the parent directory match
when a path gets the UNDECIDED result. (If this turns out to be too
expensive in some cases, we may want to later add some form of caching
to accelerate multiple queries within the same directory. This is not
implemented in this patch, though.) Also add two tests for each affected
command (add, rm, and mv) to check that they behave correctly with the
recursive pattern matching. The first test would previously fail without
this patch while the second already succeeded. It is added mostly to
make sure that we are not breaking the existing pattern matching for
directories that are really sparse, and also as a protection against any
future regressions.
Two other existing tests had to be changed as well: one test in t3602
checks that "git rm -r <dir>" won't remove sparse entries, but it didn't
allow the non-sparse entries inside <dir> to be removed. The other one,
in t7002, tested that "git mv" would correctly display a warning message
for sparse paths, but it accidentally expected the message to include
two non-sparse paths as well.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git add", "git mv", and "git rm" have been adjusted to avoid
updating paths outside of the sparse-checkout definition unless
the user specifies a "--sparse" option.
* ds/add-rm-with-sparse-index:
advice: update message to suggest '--sparse'
mv: refuse to move sparse paths
rm: skip sparse paths with missing SKIP_WORKTREE
rm: add --sparse option
add: update --renormalize to skip sparse paths
add: update --chmod to skip sparse paths
add: implement the --sparse option
add: skip tracked paths outside sparse-checkout cone
add: fail when adding an untracked sparse file
dir: fix pattern matching on dirs
dir: select directories correctly
t1092: behavior for adding sparse files
t3705: test that 'sparse_entry' is unstaged
|
|
Within match_pathname(), one successful matching category happens when
the pattern is equal to its non-wildcard prefix. At this point, we have
checked that the input 'pathname' matches the pattern up to the prefix
length, and then we subtraced that length from both 'patternlen' and
'namelen'.
In the case of a directory match, this prefix match should be
sufficient. However, the success condition only cared about _exact_
equality here. Instead, we should allow any path that agrees on this
prefix in the case of PATTERN_FLAG_MUSTBEDIR.
This case was not tested before because of the way unpack_trees() would
match a parent directory before visiting the contained paths. This
approach is changing, so we must change this comparison.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When matching a path against a list of patterns, the ones that require a
directory match previously did not work when a filename is specified.
This was fine when all pattern-matching was done within methods such as
unpack_trees() that check a directory before recursing into the
contained files. However, other commands will start matching individual
files against pattern lists without that recursive approach.
The last_matching_pattern_from_list() logic performs some checks on the
filetype of a path within the index when the PATTERN_FLAG_MUSTBEDIR flag
is set. This works great when setting SKIP_WORKTREE bits within
unpack_trees(), but doesn't work well when passing an arbitrary path
such as a file within a matching directory.
We extract the logic around determining the file type, but attempt to
avoid checking the filesystem if the parent directory already matches
the sparse-checkout patterns. The new path_matches_dir_pattern() method
includes a 'path_parent' parameter that is used to store the parent
directory of 'pathname' between multiple pattern matching tests. This is
loaded lazily, only on the first pattern it finds that has the
PATTERN_FLAG_MUSTBEDIR flag.
If we find that a path has a parent directory, we start by checking to
see if that parent directory matches the pattern. If so, then we do not
need to query the index for the type (which can be expensive). If we
find that the parent does not match, then we still must check the type
from the index for the given pathname.
Note that this does not affect cone mode pattern matching, but instead
the more general -- and slower -- full pattern set. Thus, this does not
affect the sparse index.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code refactoring.
* jt/submodule-name-to-gitdir:
submodule: extract path to submodule gitdir func
|
|
In cone mode, the sparse-index code path learned to remove ignored
files (like build artifacts) outside the sparse cone, allowing the
entire directory outside the sparse cone to be removed, which is
especially useful when the sparse patterns change.
* ds/sparse-index-ignored-files:
sparse-checkout: clear tracked sparse dirs
sparse-index: add SPARSE_INDEX_MEMORY_ONLY flag
attr: be careful about sparse directories
sparse-checkout: create helper methods
sparse-index: use WRITE_TREE_MISSING_OK
sparse-index: silently return when cache tree fails
unpack-trees: fix nested sparse-dir search
sparse-index: silently return when not using cone-mode patterns
t7519: rewrite sparse index test
|
|
We currently store each submodule gitdir in ".git/modules/<name>", but
this has problems with some submodule naming schemes, as described in a
comment in submodule_name_to_gitdir() in this patch.
Extract the determination of the location of a submodule's gitdir into
its own function submodule_name_to_gitdir(). For now, the problem
remains unsolved, but this puts us in a better position for finding a
solution.
This was motivated, at $DAYJOB, by a part of Android's repo hierarchy
[1]. In particular, there is a repo "build", and several repos of the
form "build/<name>".
This is based on earlier work by Brandon Williams [2].
[1] https://android.googlesource.com/platform/
[2] https://lore.kernel.org/git/20180808223323.79989-2-bmwill@google.com/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As we integrate the sparse index into more builtins, we occasionally
need to check the sparse-checkout patterns to see if a path is within
the sparse-checkout cone. Create some helper methods that help
initialize the patterns and check for pattern matching to make this
easier.
The existing callers of commands like get_sparse_checkout_patterns() use
a custom 'struct pattern_list' that is not necessarily the one in the
'struct index_state', so there are not many previous uses that could
adopt these helpers. There are just two in builtin/add.c and
sparse-index.c that can use path_in_sparse_checkout().
We add a path_in_cone_mode_sparse_checkout() as well that will only
return false if the path is outside of the sparse-checkout definition
_and_ the sparse-checkout patterns are in cone mode.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These functions can be useful to other parts of Git. Let's move them to
dir.c, while renaming them to be make their functionality more explicit.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
cf2dc1c238 (speed up alt_odb_usable() with many alternates, 2021-07-07)
introduced the function fspathhash() for calculating path hashes while
respecting the configuration option core.ignorecase. Call it instead of
open-coding it; the resulting code is shorter and less repetitive.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git status" codepath learned to work with sparsely populated index
without hydrating it fully.
* ds/status-with-sparse-index:
t1092: document bad sparse-checkout behavior
fsmonitor: integrate with sparse index
wt-status: expand added sparse directory entries
status: use sparse-index throughout
status: skip sparse-checkout percentage with sparse-index
diff-lib: handle index diffs with sparse dirs
dir.c: accept a directory as part of cone-mode patterns
unpack-trees: unpack sparse directory entries
unpack-trees: rename unpack_nondirectories()
unpack-trees: compare sparse directories correctly
unpack-trees: preserve cache_bottom
t1092: add tests for status/add and sparse files
t1092: expand repository data shape
t1092: replace incorrect 'echo' with 'cat'
sparse-index: include EXTENDED flag when expanding
sparse-index: skip indexes with unmerged entries
|
|
Optimization for repositories with many alternate object store.
* ew/many-alternate-optim:
oidtree: a crit-bit tree for odb_loose_cache
oidcpy_with_padding: constify `src' arg
make object_directory.loose_objects_subdir_seen a bitmap
avoid strlen via strbuf_addstr in link_alt_odb_entry
speed up alt_odb_usable() with many alternates
|
|
When we have sparse directory entries in the index, we want to compare
that directory against sparse-checkout patterns. Those pattern matching
algorithms are built expecting a file path, not a directory path. This
is especially important in the "cone mode" patterns which will match
files that exist within the "parent directories" as well as the
recursive directory matches.
If path_matches_pattern_list() is given a directory, we can add a fake
filename ("-") to the directory and get the same results as before,
assuming we are in cone mode. Since sparse index requires cone mode
patterns, this is an acceptable assumption.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With many alternates, the duplicate check in alt_odb_usable()
wastes many cycles doing repeated fspathcmp() on every existing
alternate. Use a khash to speed up lookups by odb->path.
Since the kh_put_* API uses the supplied key without
duplicating it, we also take advantage of it to replace both
xstrdup() and strbuf_release() in link_alt_odb_entry() with
strbuf_detach() to avoid the allocation and copy.
In a test repository with 50K alternates and each of those 50K
alternates having one alternate each (for a total of 100K total
alternates); this speeds up lookup of a non-existent blob from
over 16 minutes to roughly 2.7 seconds on my busy workstation.
Note: all underlying git object directories were small and
unpacked with only loose objects and no packs. Having to load
packs increases times significantly.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the dir_init() function and replace it with a DIR_INIT
macro. In many cases in the codebase we need to initialize things with
a function for good reasons, e.g. needing to call another function on
initialization. The "dir_init()" function was not one such case, and
could trivially be replaced with a more idiomatic macro initialization
pattern.
The only place where we made use of its use of memset() was in
dir_clear() itself, which resets the contents of an an existing struct
pointer. Let's use the new "memcpy() a 'blank' struct on the stack"
idiom to do that reset.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix-up to a topic that is already in 'master'.
* en/dir-traversal:
dir: introduce readdir_skip_dot_and_dotdot() helper
dir: update stale description of treat_directory()
Revert "dir: update stale description of treat_directory()"
Revert "dir: introduce readdir_skip_dot_and_dotdot() helper"
|
|
Many places in the code were doing
while ((d = readdir(dir)) != NULL) {
if (is_dot_or_dotdot(d->d_name))
continue;
...process d...
}
Introduce a readdir_skip_dot_and_dotdot() helper to make that a one-liner:
while ((d = readdir_skip_dot_and_dotdot(dir)) != NULL) {
...process d...
}
This helper particularly simplifies checks for empty directories.
Also use this helper in read_cached_dir() so that our statistics are
consistent across platforms. (In other words, read_cached_dir() should
have been using is_dot_or_dotdot() and skipping such entries, but did
not and left it to treat_path() to detect and mark such entries as
path_none.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation comment for treat_directory() was originally written
in 095952 (Teach directory traversal about subprojects, 2007-04-11)
which was before the 'struct dir_struct' split its bitfield of named
options into a 'flags' enum in 7c4c97c0 (Turn the flags in struct
dir_struct into a single variable, 2009-02-16). When those flags
changed, the comment became stale, since members like
'show_other_directories' transitioned into flags like
DIR_SHOW_OTHER_DIRECTORIES.
Update the comments for treat_directory() to use these flag names rather
than the old member names.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 4e689d81718eb6e939cace317ea3e33cb994dcbb,
to be replaced with a reworked version.
|
|
This reverts commit b548f0f1568f6b01e55ca69c24d3cb19489f92aa,
to be replaced with a reworked version.
|
|
"git clean" and "git ls-files -i" had confusion around working on
or showing ignored paths inside an ignored directory, which has
been corrected.
* en/dir-traversal:
dir: introduce readdir_skip_dot_and_dotdot() helper
dir: update stale description of treat_directory()
dir: traverse into untracked directories if they may have ignored subfiles
dir: avoid unnecessary traversal into ignored directory
t3001, t7300: add testcase showcasing missed directory traversal
t7300: add testcase showing unnecessary traversal into ignored directory
ls-files: error out on -i unless -o or -c are specified
dir: report number of visited directories and paths with trace2
dir: convert trace calls to trace2 equivalents
|
|
Many places in the code were doing
while ((d = readdir(dir)) != NULL) {
if (is_dot_or_dotdot(d->d_name))
continue;
...process d...
}
Introduce a readdir_skip_dot_and_dotdot() helper to make that a one-liner:
while ((d = readdir_skip_dot_and_dotdot(dir)) != NULL) {
...process d...
}
This helper particularly simplifies checks for empty directories.
Also use this helper in read_cached_dir() so that our statistics are
consistent across platforms. (In other words, read_cached_dir() should
have been using is_dot_or_dotdot() and skipping such entries, but did
not and left it to treat_path() to detect and mark such entries as
path_none.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation comment for treat_directory() was originally written
in 095952 (Teach directory traversal about subprojects, 2007-04-11)
which was before the 'struct dir_struct' split its bitfield of named
options into a 'flags' enum in 7c4c97c0 (Turn the flags in struct
dir_struct into a single variable, 2009-02-16). When those flags
changed, the comment became stale, since members like
'show_other_directories' transitioned into flags like
DIR_SHOW_OTHER_DIRECTORIES.
Update the comments for treat_directory() to use these flag names rather
than the old member names.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A directory that is untracked does not imply that all files under it
should be categorized as untracked; in particular, if the caller is
interested in ignored files, many files or directories underneath the
untracked directory may be ignored. We previously partially handled
this right with DIR_SHOW_IGNORED_TOO, but missed DIR_SHOW_IGNORED. It
was not obvious, though, because the logic for untracked and excluded
files had been fused together making it harder to reason about. The
previous commit split that logic out, making it easier to notice that
DIR_SHOW_IGNORED was missing. Add it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The show_other_directories case in treat_directory() tried to handle
both excludes and untracked files with the same logic, and mishandled
both the excludes and the untracked files in the process, in different
ways. Split that logic apart, and then focus on the logic for the
excludes; a subsequent commit will address the logic for untracked
files.
For show_other_directories, an excluded directory means that
every path underneath that directory will also be excluded. Given that
the calling code requested to just show directories when everything
under a directory had the same state (that's what the
"DIR_SHOW_OTHER_DIRECTORIES" flag means), we generally do not need to
traverse into such directories and can just immediately mark them as
ignored (i.e. as path_excluded). The only reason we cannot just
immediately return path_excluded is the DIR_HIDE_EMPTY_DIRECTORIES flag
and the possibility that the ignored directory is an empty directory.
The code previously treated DIR_SHOW_IGNORED_TOO in most cases as an
exception as well, which was wrong. It can sometimes reduce the number
of cases where we need to recurse (namely if
DIR_SHOW_IGNORED_TOO_MODE_MATCHING is also set), but should not be able
to increase the number of cases where we need to recurse. Fix the logic
accordingly.
Some sidenotes about possible confusion with dir.c:
* "ignored" often refers to an untracked ignore", i.e. a file which is
not tracked which matches one of the ignore/exclusion rules. But you
can also have a "tracked ignore", a tracked file that happens to match
one of the ignore/exclusion rules and which dir.c has to worry about
since "git ls-files -c -i" is supposed to list them.
* The dir code often uses "ignored" and "excluded" interchangeably,
which you need to keep in mind while reading the code.
* "exclude" is used multiple ways in the code:
* As noted above, "exclude" is often a synonym for "ignored".
* The logic for parsing .gitignore files was re-used in
.git/info/sparse-checkout, except there it is used to mark paths that
the user wants to *keep*. This was mostly addressed by commit
65edd96aec ("treewide: rename 'exclude' methods to 'pattern'",
2019-09-03), but every once in a while you'll find a comment about
"exclude" referring to these patterns that might in fact be in use
by the sparse-checkout machinery for inclusion rules.
* The word "EXCLUDE" is also used for pathspec negation, as in
(pathspec->items[3].magic & PATHSPEC_EXCLUDE)
Thus if a user had a .gitignore file containing
*~
*.log
!settings.log
And then ran
git add -- 'settings.*' ':^settings.log'
Then :^settings.log is a pathspec negation making settings.log not
be requested to be added even though all other settings.* files are
being added. Also, !settings.log in the gitignore file is a negative
exclude pattern meaning that settings.log is normally a file we
want to track even though all other *.log files are ignored.
Sometimes it feels like dir.c needs its own glossary with its many
definitions, including the multiply-defined terms.
Reported-by: Jason Gore <Jason.Gore@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Provide more statistics in trace2 output that include the number of
directories and total paths visited by the directory traversal logic.
Subsequent patches will take advantage of this to ensure we do not
unnecessarily traverse into ignored directories.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
SHA-256 transition.
* bc/hash-transition-interop-part-1:
hex: print objects using the hash algorithm member
hex: default to the_hash_algo on zero algorithm value
builtin/pack-objects: avoid using struct object_id for pack hash
commit-graph: don't store file hashes as struct object_id
builtin/show-index: set the algorithm for object IDs
hash: provide per-algorithm null OIDs
hash: set, copy, and use algo field in struct object_id
builtin/pack-redundant: avoid casting buffers to struct object_id
Use the final_oid_fn to finalize hashing of object IDs
hash: add a function to finalize object IDs
http-push: set algorithm when reading object ID
Always use oidread to read into struct object_id
hash: add an algo member to struct object_id
|
|
Builds on top of the sparse-index infrastructure to mark operations
that are not ready to mark with the sparse index, causing them to
fall back on fully-populated index that they always have worked with.
* ds/sparse-index-protections: (47 commits)
name-hash: use expand_to_path()
sparse-index: expand_to_path()
name-hash: don't add directories to name_hash
revision: ensure full index
resolve-undo: ensure full index
read-cache: ensure full index
pathspec: ensure full index
merge-recursive: ensure full index
entry: ensure full index
dir: ensure full index
update-index: ensure full index
stash: ensure full index
rm: ensure full index
merge-index: ensure full index
ls-files: ensure full index
grep: ensure full index
fsck: ensure full index
difftool: ensure full index
commit: ensure full index
checkout: ensure full index
...
|
|
Up until recently, object IDs did not have an algorithm member, only a
hash. Consequently, it was possible to share one null (all-zeros)
object ID among all hash algorithms. Now that we're going to be
handling objects from multiple hash algorithms, it's important to make
sure that all object IDs have a correct algorithm field.
Introduce a per-algorithm null OID, and add it to struct hash_algo.
Introduce a wrapper function as well, and use it everywhere we used to
use the null_oid constant.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the future, we'll want oidread to automatically set the hash
algorithm member for an object ID we read into it, so ensure we use
oidread instead of hashcpy everywhere we're copying a hash value into a
struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before iterating over all cache entries, ensure that a sparse index is
expanded to a full index to avoid unexpected behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Several methods specify that they take a 'struct index_state' pointer
with the 'const' qualifier because they intend to only query the data,
not change it. However, we will be introducing a step very low in the
method stack that might modify a sparse-index to become a full index in
the case that our queries venture inside a sparse-directory entry.
This change only removes the 'const' qualifiers that are necessary for
the following change which will actually modify the implementation of
index_name_stage_pos().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It does not make sense to make ".gitattributes", ".gitignore" and
".mailmap" symlinks, as they are supposed to be usable from the
object store (think: bare repositories where HEAD:.mailmap etc. are
used). When these files are symbolic links, we used to read the
contents of the files pointed by them by mistake, which has been
corrected.
* jk/open-dotgitx-with-nofollow:
mailmap: do not respect symlinks for in-tree .mailmap
exclude: do not respect symlinks for in-tree .gitignore
attr: do not respect symlinks for in-tree .gitattributes
exclude: add flags parameter to add_patterns()
attr: convert "macro_ok" into a flags field
add open_nofollow() helper
|
|
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An under-allocation for the untracked cache data has been corrected.
* jh/untracked-cache-fix:
dir: fix malloc of root untracked_cache_dir
|
|
Use FLEX_ALLOC_STR() to allocate the `struct untracked_cache_dir`
for the root directory. Get rid of unsafe code that might fail to
initialize the `name` field (if FLEX_ARRAY is not 1). This will
make it clear that we intend to have a structure with an empty
string following it.
A problem was observed on Windows where the length of the memset() was
too short, so the first byte of the name field was not zeroed. This
resulted in the name field having garbage from a previous use of that
area of memory.
The record for the root directory was then written to the untracked-cache
extension in the index. This garbage would then be visible to future
commands when they reloaded the untracked-cache extension.
Since the directory record for the root directory had garbage in the
`name` field, the `t/helper/test-tool dump-untracked-cache` tool
printed this garbage as the path prefix (rather than '/') for each
directory in the untracked cache as it recursed.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As with .gitattributes, we would like to make sure that .gitignore files
are handled consistently whether read from the index or from the
filesystem. Likewise, we would like to avoid reading out-of-tree files
pointed to by the symlinks, which could have security implications in
certain setups.
We can cover both by using open_nofollow() when opening the in-tree
files. We'll continue to follow links for core.excludesFile, as well as
$GIT_DIR/info/exclude.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are a number of callers of add_patterns() and its sibling
functions. Let's give them a "flags" parameter for adding new options
without having to touch each caller. We'll use this in a future patch to
add O_NOFOLLOW support. But for now each caller just passes 0.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A future feature will want to load the sparse-checkout patterns into a
pattern_list, but the current mechanism to do so is a bit complicated.
This is made difficult due to needing to find the sparse-checkout file
in different ways throughout the codebase.
The logic implemented in the new get_sparse_checkout_patterns() was
duplicated in populate_from_existing_patterns() in unpack-trees.c. Use
the new method instead, keeping the logic around handling the struct
unpack_trees_options.
The callers to get_sparse_checkout_filename() in
builtin/sparse-checkout.c manipulate the sparse-checkout file directly,
so it is not appropriate to replace logic in that file with
get_sparse_checkout_patterns().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A specialization of hashmap that uses a string as key has been
introduced. Hopefully it will see wider use over time.
* en/strmap:
shortlog: use strset from strmap.h
Use new HASHMAP_INIT macro to simplify hashmap initialization
strmap: take advantage of FLEXPTR_ALLOC_STR when relevant
strmap: enable allocations to come from a mem_pool
strmap: add a strset sub-type
strmap: split create_entry() out of strmap_put()
strmap: add functions facilitating use as a string->int map
strmap: enable faster clearing and reusing of strmaps
strmap: add more utility functions
strmap: new utility functions
hashmap: provide deallocation function names
hashmap: introduce a new hashmap_partial_clear()
hashmap: allow re-use after hashmap_free()
hashmap: adjust spacing to fix argument alignment
hashmap: add usage documentation explaining hashmap_free[_entries]()
|
|
Update stale in-code comment.
* nk/dir-c-comment-update:
dir.c: fix comments to agree with argument name
|
|
hashmap_free(), hashmap_free_entries(), and hashmap_free_() have existed
for a while, but aren't necessarily the clearest names, especially with
hashmap_partial_clear() being added to the mix and lazy-initialization
now being supported. Peff suggested we adopt the following names[1]:
- hashmap_clear() - remove all entries and de-allocate any
hashmap-specific data, but be ready for reuse
- hashmap_clear_and_free() - ditto, but free the entries themselves
- hashmap_partial_clear() - remove all entries but don't deallocate
table
- hashmap_partial_clear_and_free() - ditto, but free the entries
This patch provides the new names and converts all existing callers over
to the new naming scheme.
[1] https://lore.kernel.org/git/20201030125059.GA3277724@coredump.intra.peff.net/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: |
Junio C Hamano
Derrick Stolee
Matheus Tavares
Jonathan Tan
Atharva Raykar
René Scharfe
Eric Wong
Ævar Arnfjörð Bjarmason
Elijah Newren
Derrick Stolee
brian m. carlson
Jeff Hostetler
Jeff King
Alex Vandiver