| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many messages will be marked for translation in the following
commits. This commit updates some of them to be more consistent and
reduce diff noise in those commits. Changes are
- keep the first letter of die(), error() and warning() in lowercase
- no full stop in die(), error() or warning() if it's single sentence
messages
- indentation
- some messages are turned to BUG(), or prefixed with "BUG:" and will
not be marked for i18n
- some messages are improved to give more information
- some messages are broken down by sentence to be i18n friendly
(on the same token, combine multiple warning() into one big string)
- the trailing \n is converted to printf_ln if possible, or deleted
if not redundant
- errno_errno() is used instead of explicit strerror()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code to read compressed bitmap was not careful to avoid reading
past the end of the file, which has been corrected.
* jk/ewah-bounds-check:
ewah: adjust callers of ewah_read_mmap()
ewah_read_mmap: bounds-check mmap reads
|
|
The return value of ewah_read_mmap() is now an ssize_t,
since we could (in theory) process up to 32GB of data. This
would never happen in practice, but a corrupt or malicious
.bitmap or index file could convince us to do so.
Let's make sure that we don't stuff the value into an int,
which would cause us to incorrectly move our pointer
forward. We'd always move too little, since negative values
are used for reporting errors. So the worst case is just
that we end up reporting a corrupt file, not an
out-of-bounds read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (42 commits)
merge-one-file: compute empty blob object ID
add--interactive: compute the empty tree value
Update shell scripts to compute empty tree object ID
sha1_file: only expose empty object constants through git_hash_algo
dir: use the_hash_algo for empty blob object ID
sequencer: use the_hash_algo for empty tree object ID
cache-tree: use is_empty_tree_oid
sha1_file: convert cached object code to struct object_id
builtin/reset: convert use of EMPTY_TREE_SHA1_BIN
builtin/receive-pack: convert one use of EMPTY_TREE_SHA1_HEX
wt-status: convert two uses of EMPTY_TREE_SHA1_HEX
submodule: convert several uses of EMPTY_TREE_SHA1_HEX
sequencer: convert one use of EMPTY_TREE_SHA1_HEX
merge: convert empty tree constant to the_hash_algo
builtin/merge: switch tree functions to use object_id
builtin/am: convert uses of EMPTY_TREE_SHA1_BIN to the_hash_algo
sha1-file: add functions for hex empty tree and blob OIDs
builtin/receive-pack: avoid hard-coded constants for push certs
diff: specify abbreviation size in terms of the_hash_algo
upload-pack: replace use of several hard-coded constants
...
|
|
* maint: (25 commits)
Git 2.17.1
Git 2.16.4
Git 2.15.2
Git 2.14.4
Git 2.13.7
fsck: complain when .gitmodules is a symlink
index-pack: check .gitmodules files with --strict
unpack-objects: call fsck_finish() after fscking objects
fsck: call fsck_finish() after fscking objects
fsck: check .gitmodules content
fsck: handle promisor objects in .gitmodules check
fsck: detect gitmodules files
fsck: actually fsck blob data
fsck: simplify ".git" check
index-pack: make fsck error message more specific
verify_path: disallow symlinks in .gitmodules
update-index: stat updated files earlier
verify_dotfile: mention case-insensitivity in comment
verify_path: drop clever fallthrough
skip_prefix: add case-insensitive variant
...
|
|
* maint-2.16:
Git 2.16.4
Git 2.15.2
Git 2.14.4
Git 2.13.7
verify_path: disallow symlinks in .gitmodules
update-index: stat updated files earlier
verify_dotfile: mention case-insensitivity in comment
verify_path: drop clever fallthrough
skip_prefix: add case-insensitive variant
is_{hfs,ntfs}_dotgitmodules: add tests
is_ntfs_dotgit: match other .git files
is_hfs_dotgit: match other .git files
is_ntfs_dotgit: use a size_t for traversing string
submodule-config: verify submodule names as paths
|
|
Moving a submodule that itself has submodule in it with "git mv"
forgot to make necessary adjustment to the nested sub-submodules;
now the codepath learned to recurse into the submodules.
* sb/submodule-move-nested:
submodule: fixup nested submodules after moving the submodule
submodule-config: remove submodule_from_cache
submodule-config: add repository argument to submodule_from_{name, path}
submodule-config: allow submodule_free to handle arbitrary repositories
grep: remove "repo" arg from non-supporting funcs
submodule.h: drop declaration of connect_work_tree_and_git_dir
|
|
To ensure that we are hash algorithm agnostic, use the_hash_algo to look
up the object ID for the empty blob instead of using the empty_tree_oid
variable.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the exclude_sha1 member of struct untracked_cache_dir and rename
it to exclude_oid. Eliminate several hard-coded integral constants, and
update a function name that referred to SHA-1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
connect_work_tree_and_git_dir is used to connect a submodule worktree with
its git directory and vice versa after events that require a reconnection
such as moving around the working tree. As submodules can have nested
submodules themselves, we'd also want to fix the nested submodules when
asked to. Add an option to recurse into the nested submodules and connect
them as well.
As submodules are identified by their name (which determines their git
directory in relation to their superproject's git directory) internally
and by their path in the working tree of the superproject, we need to
make sure that the mapping of name <-> path is kept intact. We can do
that in the git-mv command by writing out the gitmodules file first
and then forcing a reload of the submodule config machinery.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert read_sha1_file to take a pointer to struct object_id and rename
it read_object_file. Do the same for read_sha1_file_extended.
Convert one use in grep.c to use the new function without any other code
change, since the pointer being passed is a void pointer that is already
initialized with a pointer to struct object_id. Update the declaration
and definitions of the modified functions, and apply the following
semantic patch to convert the remaining callers:
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1.hash, E2, E3)
+ read_object_file(&E1, E2, E3)
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1->hash, E2, E3)
+ read_object_file(E1, E2, E3)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1.hash, E2, E3, E4)
+ read_object_file_extended(&E1, E2, E3, E4)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1->hash, E2, E3, E4)
+ read_object_file_extended(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Writing out the index file when the only thing that changed in it
is the untracked cache information is often wasteful, and this has
been optimized out.
* bp/untracked-cache-noflush:
untracked cache: use git_env_bool() not getenv() for customization
dir.c: don't flag the index as dirty for changes to the untracked cache
|
|
GIT_DISABLE_UNTRACKED_CACHE and GIT_TEST_UNTRACKED_CACHE are only
sensed for their presense by using getenv(); use git_env_bool()
instead so that GIT_DISABLE_UNTRACKED_CACHE=false would work as
naïvely expected.
Also rename GIT_TEST_UNTRACKED_CACHE to GIT_FORCE_UNTRACKED_CACHE
to express what it does more honestly. Forcing its use may be one
useful thing to do while testing the feature, but testing does not
have to be the only use of the knob.
While at it, avoid repeated calls to git_env_bool() by capturing the
return value from the first call in a static variable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some bugs around "untracked cache" feature have been fixed.
* nd/fix-untracked-cache-invalidation:
dir.c: ignore paths containing .git when invalidating untracked cache
dir.c: stop ignoring opendir() error in open_cached_dir()
dir.c: fix missing dir invalidation in untracked code
dir.c: avoid stat() in valid_cached_dir()
status: add a failing test showing a core.untrackedCache bug
|
|
* nd/trace-index-ops:
trace: measure where the time is spent in the index-heavy operations
|
|
Conversion from uchar[20] to struct object_id continues.
* po/object-id:
sha1_file: rename hash_sha1_file_literally
sha1_file: convert write_loose_object to object_id
sha1_file: convert force_object_loose to object_id
sha1_file: convert write_sha1_file to object_id
notes: convert write_notes_tree to object_id
notes: convert combine_notes_* to object_id
commit: convert commit_tree* to object_id
match-trees: convert splice_tree to object_id
cache: clear whole hash buffer with oidclr
sha1_file: convert hash_sha1_file to object_id
dir: convert struct sha1_stat to use object_id
sha1_file: convert pretend_sha1_file to object_id
|
|
read_directory() code ignores all paths named ".git" even if it's not
a valid git repository. See treat_path() for details. Since ".git" is
basically invisible to read_directory(), when we are asked to
invalidate a path that contains ".git", we can safely ignore it
because the slow path would not consider it anyway.
This helps when fsmonitor is used and we have a real ".git" repo at
worktree top. Occasionally .git/index will be updated and if the
fsmonitor hook does not filter it, untracked cache is asked to
invalidate the path ".git/index".
Without this patch, we invalidate the root directory unncessarily,
which:
- makes read_directory() fall back to slow path for root directory
(slower)
- makes the index dirty (because UNTR extension is updated). Depending
on the index size, writing it down could also be slow.
A note about the new "safe_path" knob. Since this new check could be
relatively expensive, avoid it when we know it's not needed. If the
path comes from the index, it can't contain ".git". If it does
contain, we may be screwed up at many more levels, not just this one.
Noticed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The untracked cache saves its current state in the UNTR index extension.
Currently, _any_ change to that state causes the index to be flagged as dirty
and written out to disk. Unfortunately, the cost to write out the index can
exceed the savings gained by using the untracked cache. Since it is a cache
that can be updated from the current state of the working directory, there is
no functional requirement that the index be written out for every change to the
untracked cache.
Update the untracked cache logic so that it no longer forces the index to be
written to disk except in the case where the extension is being turned on or
off. When some other git command requires the index to be written to disk, the
untracked cache will take advantage of that to save it's updated state as well.
This results in a performance win when looked at over common sequences of git
commands (ie such as a status followed by add, commit, etc).
After this patch, all the logic to track statistics for the untracked cache
could be removed as it is only used by debug tracing used to debug the untracked
cache.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All the known heavy code blocks are measured (except object database
access). This should help identify if an optimization is effective or
not. An unoptimized git-status would give something like below:
0.001791141 s: read cache ...
0.004011363 s: preload index
0.000516161 s: refresh index
0.003139257 s: git command: ... 'status' '--porcelain=2'
0.006788129 s: diff-files
0.002090267 s: diff-index
0.001885735 s: initialize name hash
0.032013138 s: read directory
0.051781209 s: git command: './git' 'status'
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A follow-up to the recently fixed bugs in the untracked
invalidation. If opendir() fails it should show a warning, perhaps
this should die, but if this ever happens the error is probably
recoverable for the user, and dying would just make things worse.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the declaration and definition of hash_sha1_file to use
struct object_id and adjust all function calls.
Rename this function to hash_object_file.
Signed-off-by: Patryk Obara <patryk.obara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the declaration of struct sha1_stat. Adjust all usages of this
struct and replace hash{clr,cmp,cpy} with oid{clr,cmp,cpy} wherever
possible. Rename it to struct oid_stat.
Rename static function load_sha1_stat to load_oid_stat.
Remove macro EMPTY_BLOB_SHA1_BIN, as it's no longer used.
Signed-off-by: Patryk Obara <patryk.obara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Let's start with how create a new directory cache after the last one
becomes invalid (e.g. because its dir mtime has changed...). In
open_cached_dir():
1. We start out with valid_cached_dir() returning false, which should
call invalidate_directory() to put a directory state back to
initial state, no untracked entries (untracked_nr zero), no sub
directory traversal (dirs[].recurse zero).
2. Since the cache cannot be used, we go the slow path opendir() and
go through items one by one via readdir(). All the directories on
disk will be added back to the cache (if not already exist in
dirs[]) and its flag "recurse" gets changed to one to note that
it's part of the cached dir travesal next time.
3. By the time we reach close_cached_dir() we should have a good
subdir list in dirs[]. Those with "recurse" flag set are the ones
present in the on-disk directory. The directory is now marked
"valid".
Next time read_directory() is called, since the directory is marked
valid, it will skip readdir(), go fast path and traverse through
dirs[] array instead.
Steps one and two need some tight cooperation. If a subdir is removed,
readdir() will not find it and of course we cannot examine/invalidate
it. To make sure removed directories on disk are gone from the cache,
step one must make sure recurse flag of all subdirs are zero.
But that's not true. If "valid" flag is already false, there is a
chance we go straight to the end of valid_cached_dir() without calling
invalidate_directory(). Or we fail to meet the "if (untracked-valid)"
condition and skip over the invalidate_directory().
After step 3, we mark the cache valid. Any stale subdir with incorrect
recurse flag becomes a real subdir next time we traverse the directory
using dirs[] array.
We could avoid this by making sure invalidate_directory() is always
called (therefore dirs[].recurse cleared) at the beginning of
open_cached_dir(). Which is what this patch does.
As to how we get into this situation, the key in the test is this
command
git checkout master
where "one/file" is replaced with "one" in the index. This index
update triggers untracked_cache_invalidate_path(), which clears valid
flag of the root directory while keeping "recurse" flag on the subdir
"one" on. On the next git-status, we go through steps 1-3 above and
save an incorrect cache on disk. The second git-status blindly follows
the bad cache data and shows the problem.
This is arguably because of a bad design where "recurse" flag plays
double roles: whether a directory should be saved on disk, and whether
it is part of a directory traversal.
We need to keep recurse flag set at "checkout master" because of the
first role: we need to keep subdir caches (dir "two" for example has
not been touched at all, no reason to throw its cache away).
As long as we make sure to ignore/reset "recurse" flag at the
beginning of a directory traversal, we're good. But maybe eventually
we should separate these two roles.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
stat() may follow a symlink and return stat data of the link's target
instead of the link itself. We are concerned about the link itself.
It's kind of hard to demonstrate the bug. I think when path->buf is a
symlink, we most likely find that its target's stat data does not
match our cached one, which means we ignore the cache and fall back to
slow path.
This is performance issue, not correctness (though we could still
catch it by verifying test-dump-untracked-cache. The less unlikely
case is, link target stat data matches the cached version and we
incorrectly go fast path, ignoring real data on disk. A test for this
may involve manipulating stat data, which may be not portable.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the helper macro MOVE_ARRAY to move arrays. This is shorter and
safer, as it automatically infers the size of elements.
Patch generated by Coccinelle and contrib/coccinelle/array.cocci in
Travis CI's static analysis build job.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for implementing narrow/partial clone, the object
walking machinery has been taught a way to tell it to "filter" some
objects from enumeration.
* jh/object-filtering:
rev-list: support --no-filter argument
list-objects-filter-options: support --no-filter
list-objects-filter-options: fix 'keword' typo in comment
pack-objects: add list-objects filtering
rev-list: add list-objects filtering support
list-objects: filter objects in traverse_commit_list
oidset: add iterator methods to oidset
oidmap: add oidmap iterator methods
dir: allow exclusions from blob in addition to file
|
|
Refactor add_excludes() to separate the reading of the
exclude file into a buffer and the parsing of the buffer
into exclude_list items.
Add add_excludes_from_blob_to_list() to allow an exclude
file be specified with an OID without assuming a local
worktree or index exists.
Refactor read_skip_worktree_file_from_index() and add
do_read_blob() to eliminate duplication of preliminary
processing of blob contents.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We learned to talk to watchman to speed up "git status" and other
operations that need to see which paths have been modified.
* bp/fsmonitor:
fsmonitor: preserve utf8 filenames in fsmonitor-watchman log
fsmonitor: read entirety of watchman output
fsmonitor: MINGW support for watchman integration
fsmonitor: add a performance test
fsmonitor: add a sample integration script for Watchman
fsmonitor: add test cases for fsmonitor extension
split-index: disable the fsmonitor extension when running the split index test
fsmonitor: add a test tool to dump the index extension
update-index: add fsmonitor support to update-index
ls-files: Add support in ls-files to display the fsmonitor valid bit
fsmonitor: add documentation for the fsmonitor extension.
fsmonitor: teach git to optionally utilize a file system monitor to speed up detecting new or changed files.
update-index: add a new --force-write-index option
preload-index: add override to enable testing preload-index
bswap: add 64 bit endianness helper get_be64
|
|
The set of paths output from "git status --ignored" was tied
closely with its "--untracked=<mode>" option, but now it can be
controlled more flexibly. Most notably, a directory that is
ignored because it is listed to be ignored in the ignore/exclude
mechanism can be handled differently from a directory that ends up
to be ignored only because all files in it are ignored.
* jm/status-ignored-files-list:
status: test ignored modes
status: document options to show matching ignored files
status: report matching ignored and normal untracked
status: add option to show ignored files differently
|
|
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (25 commits)
refs/files-backend: convert static functions to object_id
refs: convert read_raw_ref backends to struct object_id
refs: convert peel_object to struct object_id
refs: convert resolve_ref_unsafe to struct object_id
worktree: convert struct worktree to object_id
refs: convert resolve_gitlink_ref to struct object_id
Convert remaining callers of resolve_gitlink_ref to object_id
sha1_file: convert index_path and index_fd to struct object_id
refs: convert reflog_expire parameter to struct object_id
refs: convert read_ref_at to struct object_id
refs: convert peel_ref to struct object_id
builtin/pack-objects: convert to struct object_id
pack-bitmap: convert traverse_bitmap_commit_list to object_id
refs: convert dwim_log to struct object_id
builtin/reflog: convert remaining unsigned char uses to object_id
refs: convert dwim_ref and expand_ref to struct object_id
refs: convert read_ref and read_ref_full to object_id
refs: convert resolve_refdup and refs_resolve_refdup to struct object_id
Convert check_connected to use struct object_id
refs: update ref transactions to use struct object_id
...
|
|
"git status --ignored -u" did not stop at a working tree of a
separate project that is embedded in an ignored directory and
listed files in that other project, instead of just showing the
directory itself as ignored.
* js/submodule-in-excluded:
status: do not get confused by submodules in excluded directories
|
|
Teach status command to handle `--ignored=matching` with
`--untracked-files=normal`
Signed-off-by: Jameson Miller <jamill@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach the status command more flexibility in how ignored files are
reported. Currently, the reporting of ignored files and untracked
files are linked. You cannot control how ignored files are reported
independently of how untracked files are reported (i.e. `all` vs
`normal`). This makes it impossible to show untracked files with the
`all` option, but show ignored files with the `normal` option.
This work 1) adds the ability to control the reporting of ignored
files independently of untracked files and 2) introduces the concept
of status reporting ignored paths that explicitly match an ignored
pattern. There are 2 benefits to these changes: 1) if a consumer needs
all untracked files but not all ignored files, there is a performance
benefit to not scanning all contents of an ignored directory and 2)
returning ignored files that explicitly match a path allow a consumer
to make more informed decisions about when a status result might be
stale.
This commit implements --ignored=matching with --untracked-files=all.
The following commit will implement --ignored=matching with
--untracked=files=normal.
As an example of where this flexibility could be useful is that our
application (Visual Studio) runs the status command and presents the
output. It shows all untracked files individually (e.g. using the
'--untracked-files==all' option), and would like to know about which
paths are ignored. It uses information about ignored paths to make
decisions about when the status result might have changed.
Additionally, many projects place build output into directories inside
a repository's working directory (e.g. in "bin/" and "obj/"
directories). Normal usage is to explicitly ignore these 2 directory
names in the .gitignore file (rather than or in addition to the *.obj
pattern).If an application could know that these directories are
explicitly ignored, it could infer that all contents are ignored as
well and make better informed decisions about files in these
directories. It could infer that any changes under these paths would
not affect the output of status. Additionally, there can be a
significant performance benefit by avoiding scanning through ignored
directories.
When status is set to report matching ignored files, it has the
following behavior. Ignored files and directories that explicitly
match an exclude pattern are reported. If an ignored directory matches
an exclude pattern, then the path of the directory is returned. If a
directory does not match an exclude pattern, but all of its contents
are ignored, then the contained files are reported instead of the
directory.
Signed-off-by: Jameson Miller <jamill@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We meticulously pass the `exclude` flag to the `treat_directory()`
function so that we can indicate that files in it are excluded rather
than untracked when recursing.
But we did not yet treat submodules the same way.
Because of that, `git status --ignored --untracked` with a submodule
`submodule` in a gitignored `tracked/` would show the submodule in the
"Untracked files" section, e.g.
On branch master
Untracked files:
(use "git add <file>..." to include in what will be committed)
tracked/submodule/
Ignored files:
(use "git add -f <file>..." to include in what will be committed)
tracked/submodule/initial.t
Instead, we would want it to show the submodule in the "Ignored files"
section:
On branch master
Ignored files:
(use "git add -f <file>..." to include in what will be committed)
tracked/submodule/
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the declaration and definition of resolve_gitlink_ref to use
struct object_id and apply the following semantic patch:
@@
expression E1, E2, E3;
@@
- resolve_gitlink_ref(E1, E2, E3.hash)
+ resolve_gitlink_ref(E1, E2, &E3)
@@
expression E1, E2, E3;
@@
- resolve_gitlink_ref(E1, E2, E3->hash)
+ resolve_gitlink_ref(E1, E2, E3)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
detecting new or changed files.
When the index is read from disk, the fsmonitor index extension is used
to flag the last known potentially dirty index entries. The registered
core.fsmonitor command is called with the time the index was last
updated and returns the list of files changed since that time. This list
is used to flag any additional dirty cache entries and untracked cache
directories.
We can then use this valid state to speed up preload_index(),
ie_match_stat(), and refresh_cache_ent() as they do not need to lstat()
files to detect potential changes for those entries marked
CE_FSMONITOR_VALID.
In addition, if the untracked cache is turned on valid_cached_dir() can
skip checking directories for new or changed files as fsmonitor will
invalidate the cache only for those directories that have been
identified as having potential changes.
To keep the CE_FSMONITOR_VALID state accurate during git operations;
when git updates a cache entry to match the current state on disk,
it will now set the CE_FSMONITOR_VALID bit.
Inversely, anytime git changes a cache entry, the CE_FSMONITOR_VALID bit
is cleared and the corresponding untracked cache directory is marked
invalid.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Improve the performance of the directory listing logic when it wants to list
non-empty ignored directories. In order to show non-empty ignored directories,
the existing logic will recursively iterate through all contents of an ignored
directory. This change introduces the optimization to stop iterating through
the contents once it finds the first file. This can have a significant
improvement in 'git status --ignored' performance in repositories with a large
number of files in ignored directories.
For an example of the performance difference on an example repository with
196,000 files in 400 ignored directories:
| Command | Time (s) |
| -------------------------- | --------- |
| git status | 1.2 |
| git status --ignored (old) | 3.9 |
| git status --ignored (new) | 1.4 |
Signed-off-by: Jameson Miller <jamill@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* rs/stat-data-unaligned-reads-fix:
dir: support platforms that require aligned reads
|
|
Code clean-up.
* rs/stat-data-unaligned-reads-fix:
dir: support platforms that require aligned reads
|
|
The untracked cache is stored on disk by concatenating its memory
structures without any padding. Consequently some of the structs are
not aligned at a particular boundary when the whole extension is read
back in one go. That's only OK on platforms without strict alignment
requirements, or for byte-aligned data like strings or hash values.
Decode struct ondisk_untracked_cache carefully from the extension
blob by using explicit pointer arithmetic with offsets, avoiding
alignment issues. Use char pointers for passing stat_data objects to
stat_data_from_disk(), and use memcpy(3) in that function to get the
contents into a properly aligned struct, then perform the byte-order
adjustment in place there.
Found with Clang's UBSan.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Minor code cleanup.
* ab/wildmatch:
wildmatch: remove unused wildopts parameter
|
|
A common pattern to free a piece of memory and assign NULL to the
pointer that used to point at it has been replaced with a new
FREE_AND_NULL() macro.
* ab/free-and-null:
*.[ch] refactoring: make use of the FREE_AND_NULL() macro
coccinelle: make use of the "expression" FREE_AND_NULL() rule
coccinelle: add a rule to make "expression" code use FREE_AND_NULL()
coccinelle: make use of the "type" FREE_AND_NULL() rule
coccinelle: add a rule to make "type" code use FREE_AND_NULL()
git-compat-util: add a FREE_AND_NULL() wrapper around free(ptr); ptr = NULL
|
|
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
|
|
Code clean-up.
* bw/ls-files-sans-the-index:
ls-files: factor out tag calculation
ls-files: factor out debug info into a function
ls-files: convert show_files to take an index
ls-files: convert show_ce_entry to take an index
ls-files: convert prune_cache to take an index
ls-files: convert ce_excluded to take an index
ls-files: convert show_ru_info to take an index
ls-files: convert show_other_files to take an index
ls-files: convert show_killed_files to take an index
ls-files: convert write_eolinfo to take an index
ls-files: convert overlay_tree_on_cache to take an index
tree: convert read_tree to take an index parameter
convert: convert renormalize_buffer to take an index
convert: convert convert_to_git to take an index
convert: convert convert_to_git_filter_fd to take an index
convert: convert crlf_to_git to take an index
convert: convert get_cached_convert_stats_ascii to take an index
|
|
Remove the unused wildopts placeholder struct from being passed to all
wildmatch() invocations, or rather remove all the boilerplate NULL
parameters.
This parameter was added back in commit 9b3497cab9 ("wildmatch: rename
constants and update prototype", 2013-01-01) as a placeholder for
future use. Over 4 years later nothing has made use of it, let's just
remove it. It can be added in the future if we find some reason to
start using such a parameter.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Three instances of the same helper function have been consolidated
to one.
* pc/dir-count-slashes:
dir: create function count_slashes()
|
|
Apply the result of the just-added coccinelle rule. This manually
excludes a few occurrences, mostly things that resulted in many
FREE_AND_NULL() on one line, that'll be manually fixed in a subsequent
change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Nguyễn Thái Ngọc Duy
Junio C Hamano
Jeff King
brian m. carlson
Stefan Beller
Ben Peart
Patryk Obara
SZEDER Gábor
Jeff Hostetler
Jameson Miller
Johannes Schindelin
René Scharfe
Ævar Arnfjörð Bjarmason
Brandon Williams