| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git clean" fixes.
* en/clean-nested-with-ignored:
dir: special case check for the possibility that pathspec is NULL
clean: fix theoretical path corruption
clean: rewrap overly long line
clean: avoid removing untracked files in a nested git repository
clean: disambiguate the definition of -d
git-clean.txt: do not claim we will delete files with -n/--dry-run
dir: add commentary explaining match_pathspec_item's return value
dir: if our pathspec might match files under a dir, recurse into it
dir: make the DO_MATCH_SUBMODULE code reusable for a non-submodule case
dir: also check directories for matching pathspecs
dir: fix off-by-one error in match_pathspec_item
dir: fix typo in comment
t7300: add testcases showing failure to clean specified pathspecs
|
|
Commits 404ebceda01c ("dir: also check directories for matching
pathspecs", 2019-09-17) and 89a1f4aaf765 ("dir: if our pathspec might
match files under a dir, recurse into it", 2019-09-17) added calls to
match_pathspec() and do_match_pathspec() passing along their pathspec
parameter. Both match_pathspec() and do_match_pathspec() assume the
pathspec argument they are given is non-NULL. It turns out that
unpack-tree.c's verify_clean_subdirectory() calls read_directory() with
pathspec == NULL, and it is possible on case insensitive filesystems for
that NULL to make it to these new calls to match_pathspec() and
do_match_pathspec(). Add appropriate checks on the NULLness of pathspec
to avoid a segfault.
In case the negation throws anyone off (one of the calls was to
do_match_pathspec() while the other was to !match_pathspec(), yet no
negation of the NULLness of pathspec is used), there are two ways to
understand the differences:
* The code already handled the pathspec == NULL cases before this
series, and this series only tried to change behavior when there was
a pathspec, thus we only want to go into the if-block if pathspec is
non-NULL.
* One of the calls is for whether to recurse into a subdirectory, the
other is for after we've recursed into it for whether we want to
remove the subdirectory itself (i.e. the subdirectory didn't match
but something under it could have). That difference in situation
leads to the slight differences in logic used (well, that and the
slightly unusual fact that we don't want empty pathspecs to remove
untracked directories by default).
Denton found and analyzed one issue and provided the patch for the
match_pathspec() call, SZEDER figured out why the issue only reproduced
for some folks and not others and provided the testcase, and I looked
through the remainder of the series and noted the do_match_pathspec()
call that should have the same check.
Co-authored-by: Denton Liu <liu.denton@gmail.com>
Co-authored-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The internal code originally invented for ".gitignore" processing
got reshuffled and renamed to make it less tied to "excluding" and
stress more that it is about "matching", as it has been reused for
things like sparse checkout specification that want to check if a
path is "included".
* ds/include-exclude:
unpack-trees: rename 'is_excluded_from_list()'
treewide: rename 'exclude' methods to 'pattern'
treewide: rename 'EXCL_FLAG_' to 'PATTERN_FLAG_'
treewide: rename 'struct exclude_list' to 'struct pattern_list'
treewide: rename 'struct exclude' to 'struct path_pattern'
|
|
Users expect files in a nested git repository to be left alone unless
sufficiently forced (with two -f's). Unfortunately, in certain
circumstances, git would delete both tracked (and possibly dirty) files
and untracked files within a nested repository. To explain how this
happens, let's contrast a couple cases. First, take the following
example setup (which assumes we are already within a git repo):
git init nested
cd nested
>tracked
git add tracked
git commit -m init
>untracked
cd ..
In this setup, everything works as expected; running 'git clean -fd'
will result in fill_directory() returning the following paths:
nested/
nested/tracked
nested/untracked
and then correct_untracked_entries() would notice this can be compressed
to
nested/
and then since "nested/" is a directory, we would call
remove_dirs("nested/", ...), which would
check is_nonbare_repository_dir() and then decide to skip it.
However, if someone also creates an ignored file:
>nested/ignored
then running 'git clean -fd' would result in fill_directory() returning
the same paths:
nested/
nested/tracked
nested/untracked
but correct_untracked_entries() will notice that we had ignored entries
under nested/ and thus simplify this list to
nested/tracked
nested/untracked
Since these are not directories, we do not call remove_dirs() which was
the only place that had the is_nonbare_repository_dir() safety check --
resulting in us deleting both the untracked file and the tracked (and
possibly dirty) file.
One possible fix for this issue would be walking the parent directories
of each path and checking if they represent nonbare repositories, but
that would be wasteful. Even if we added caching of some sort, it's
still a waste because we should have been able to check that "nested/"
represented a nonbare repository before even descending into it in the
first place. Add a DIR_SKIP_NESTED_GIT flag to dir_struct.flags and use
it to prevent fill_directory() and friends from descending into nested
git repos.
With this change, we also modify two regression tests added in commit
91479b9c72f1 ("t7300: add tests to document behavior of clean and nested
git", 2015-06-15). That commit, nor its series, nor the six previous
iterations of that series on the mailing list discussed why those tests
coded the expectation they did. In fact, it appears their purpose was
simply to test _existing_ behavior to make sure that the performance
changes didn't change the behavior. However, these two tests directly
contradicted the manpage's claims that two -f's were required to delete
files/directories under a nested git repository. While one could argue
that the user gave an explicit path which matched files/directories that
were within a nested repository, there's a slippery slope that becomes
very difficult for users to understand once you go down that route (e.g.
what if they specified "git clean -f -d '*.c'"?) It would also be hard
to explain what the exact behavior was; avoid such problems by making it
really simple.
Also, clean up some grammar errors describing this functionality in the
git-clean manpage.
Finally, there are still a couple bugs with -ffd not cleaning out enough
(e.g. missing the nested .git) and with -ffdX possibly cleaning out the
wrong files (paying attention to outer .gitignore instead of inner).
This patch does not address these cases at all (and does not change the
behavior relative to those flags), it only fixes the handling when given
a single -f. See
https://public-inbox.org/git/20190905212043.GC32087@szeder.dev/ for more
discussion of the -ffd[X?] bugs.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The way match_pathspec_item() handles names and pathspecs with trailing
slash characters, in conjunction with special options like
DO_MATCH_DIRECTORY and DO_MATCH_LEADING_PATHSPEC were non-obvious, and
broken until this patch series. Add a table in a comment explaining the
intent of how these work.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For git clean, if a directory is entirely untracked and the user did not
specify -d (corresponding to DIR_SHOW_IGNORED_TOO), then we usually do
not want to remove that directory and thus do not recurse into it.
However, if the user manually specified specific (or even globbed) paths
somewhere under that directory to remove, then we need to recurse into
the directory to make sure we remove the relevant paths under that
directory as the user requested.
Note that this does not mean that the recursed-into directory will be
added to dir->entries for later removal; as of a few commits earlier in
this series, there is another more strict match check that is run after
returning from a recursed-into directory before deciding to add it to the
list of entries. Therefore, this will only result in files underneath
the given directory which match one of the pathspecs being added to the
entries list.
Two notes of potential interest to future readers:
* If we wanted to only recurse into a directory when it is specifically
matched rather than matched-via-glob (e.g. '*.c'), then we could do
so via making the final non-zero return in match_pathspec_item be
MATCHED_RECURSIVELY instead of MATCHED_RECURSIVELY_LEADING_PATHSPEC.
(Note that the relative order of MATCHED_RECURSIVELY_LEADING_PATHSPEC
and MATCHED_RECURSIVELY are important for such a change.) I was
leaving open that possibility while writing an RFC asking for the
behavior we want, but even though we don't want it, that knowledge
might help you understand the code flow better.
* There is a growing amount of logic in read_directory_recursive() for
deciding whether to recurse into a subdirectory. However, there is a
comment immediately preceding this logic that says to recurse if
instructed by treat_path(). It may be better for the logic in
read_directory_recursive() to ultimately be moved to treat_path() (or
another function it calls, such as treat_directory()), but I have
left that for someone else to tackle in the future.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The specific checks done in match_pathspec_item for the DO_MATCH_SUBMODULE
case are useful for other cases which have nothing to do with submodules.
Rename this constant; a subsequent commit will make use of this change.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Even if a directory doesn't match a pathspec, it is possible, depending
on the precise pathspecs, that some file underneath it might. So we
special case and recurse into the directory for such situations. However,
we previously always added any untracked directory that we recursed into
to the list of untracked paths, regardless of whether the directory
itself matched the pathspec.
For the case of git-clean and a set of pathspecs of "dir/file" and "more",
this caused a problem because we'd end up with dir entries for both of
"dir"
"dir/file"
Then correct_untracked_entries() would try to helpfully prune duplicates
for us by removing "dir/file" since it's under "dir", leaving us with
"dir"
Since the original pathspec only had "dir/file", the only entry left
doesn't match and leaves nothing to be removed. (Note that if only one
pathspec was specified, e.g. only "dir/file", then the common_prefix_len
optimizations in fill_directory would cause us to bypass this problem,
making it appear in simple tests that we could correctly remove manually
specified pathspecs.)
Fix this by actually checking whether the directory we are about to add
to the list of dir entries actually matches the pathspec; only do this
matching check after we have already returned from recursing into the
directory.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For a pathspec like 'foo/bar' comparing against a path named "foo/",
namelen will be 4, and match[namelen] will be 'b'. The correct location
of the directory separator is namelen-1.
However, other callers of match_pathspec_item() such as builtin/grep.c's
submodule_path_match() will compare against a path named "foo" instead of
"foo/". It might be better to change all the callers to be consistent,
as discussed at
https://public-inbox.org/git/xmqq7e6cdnkr.fsf@gitster-ct.c.googlers.com/
and
https://public-inbox.org/git/CABPp-BERWUPCPq-9fVW1LNocqkrfsoF4BPj3gJd9+En43vEkTQ@mail.gmail.com/
but there are many cases to audit, so for now just make sure we handle
both cases with and without a trailing slash.
The reason the code worked despite this sometimes-off-by-one error was
that the subsequent code immediately checked whether the first matchlen
characters matched (which they do) and then bailed and return
MATCHED_RECURSIVELY anyway since wildmatch doesn't have the ability to
check if "name" can be matched as a directory (or prefix) against the
pathspec.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The first consumer of pattern-matching filenames was the
.gitignore feature. In that context, storing a list of patterns
as a 'struct exclude_list' makes sense. However, the
sparse-checkout feature then adopted these structures and methods,
but with the opposite meaning: these patterns match the files
that should be included!
Now that this library is renamed to use 'struct pattern_list'
and 'struct pattern', we can now rename the method used by
the sparse-checkout feature to determine which paths should
appear in the working directory.
The method is_excluded_from_list() is only used by the
sparse-checkout logic in unpack-trees and list-objects-filter.
The confusing part is that it returned 1 for "excluded" (i.e.
it matches the list of exclusions) but that really manes that
the path matched the list of patterns for _inclusion_ in the
working directory.
Rename the method to be path_matches_pattern_list() and have
it return an explicit 'enum pattern_match_result'. Here, the
values MATCHED = 1, UNMATCHED = 0, and UNDECIDED = -1 agree
with the previous integer values. This shift allows future
consumers to better understand what the retur values mean,
and provides more type checking for handling those values.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The first consumer of pattern-matching filenames was the
.gitignore feature. In that context, storing a list of patterns
as a 'struct exclude_list' makes sense. However, the
sparse-checkout feature then adopted these structures and methods,
but with the opposite meaning: these patterns match the files
that should be included!
It would be clearer to rename this entire library as a "pattern
matching" library, and the callers apply exclusion/inclusion
logic accordingly based on their needs.
This commit renames several methods defined in dir.h to make
more sense with the renamed 'struct exclude_list' to 'struct
pattern_list' and 'struct exclude' to 'struct path_pattern':
* last_exclude_matching() -> last_matching_pattern()
* parse_exclude() -> parse_path_pattern()
In addition, the word 'exclude' was replaced with 'pattern'
in the methods below:
* add_exclude_list()
* add_excludes_from_file_to_list()
* add_excludes_from_file()
* add_excludes_from_blob_to_list()
* add_exclude()
* clear_exclude_list()
A few methods with the word "exclude" remain. These will
be handled seperately. In particular, the method
"is_excluded()" is concretely about the .gitignore file
relative to a specific directory. This is the important
boundary between library and consumer: is_excluded() cares
about .gitignore, but is_excluded() calls
last_matching_pattern() to make that decision.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The first consumer of pattern-matching filenames was the
.gitignore feature. In that context, storing a list of patterns
as a 'struct exclude_list' makes sense. However, the
sparse-checkout feature then adopted these structures and methods,
but with the opposite meaning: these patterns match the files
that should be included!
It would be clearer to rename this entire library as a "pattern
matching" library, and the callers apply exclusion/inclusion
logic accordingly based on their needs.
This commit replaces 'EXCL_FLAG_' to 'PATTERN_FLAG_' in the
names of the flags used on 'struct path_pattern'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The first consumer of pattern-matching filenames was the
.gitignore feature. In that context, storing a list of patterns
as a 'struct exclude_list' makes sense. However, the
sparse-checkout feature then adopted these structures and methods,
but with the opposite meaning: these patterns match the files
that should be included!
It would be clearer to rename this entire library as a "pattern
matching" library, and the callers apply exclusion/inclusion
logic accordingly based on their needs.
This commit renames 'struct exclude_list' to 'struct pattern_list'
and renames several variables called 'el' to 'pl'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The first consumer of pattern-matching filenames was the
.gitignore feature. In that context, storing a list of patterns
as a list of 'struct exclude' items makes sense. However, the
sparse-checkout feature then adopted these structures and methods,
but with the opposite meaning: these patterns match the files
that should be included!
It would be clearer to rename this entire library as a "pattern
matching" library, and the callers apply exclusion/inclusion
logic accordingly based on their needs.
This commit renames 'struct exclude' to 'struct path_pattern'
and renames several variable names to match. 'struct pattern'
was already taken by attr.c, and this more completely describes
that the patterns are specific to file paths.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Calculating the sum of two array indexes to find the midpoint between
them can overflow, i.e. code like this is unsafe for big arrays:
mid = (first + last) >> 1;
Make sure the intermediate value stays within the boundaries instead,
like this:
mid = first + ((last - first) >> 1);
The loop condition of the binary search makes sure that 'last' is
always greater than 'first', so this is safe as long as 'first' is
not negative. And that can be verified easily using the pre-context
of each change, except for name-hash.c, so add an assertion to that
effect there.
The unsafe calculations were found with:
git grep '(.*+.*) *>> *1'
This is a continuation of 19716b21a4 (cleanup: fix possible overflow
errors in binary search, 2017-10-08).
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* jk/untracked-cache-more-fixes:
untracked-cache: simplify parsing by dropping "len"
untracked-cache: simplify parsing by dropping "next"
untracked-cache: be defensive about missing NULs in index
|
|
Further code clean-up to allow the lowest level of name-to-object
mapping layer to work with a passed-in repository other than the
default one.
* nd/sha1-name-c-wo-the-repository: (34 commits)
sha1-name.c: remove the_repo from get_oid_mb()
sha1-name.c: remove the_repo from other get_oid_*
sha1-name.c: remove the_repo from maybe_die_on_misspelt_object_name
submodule-config.c: use repo_get_oid for reading .gitmodules
sha1-name.c: add repo_get_oid()
sha1-name.c: remove the_repo from get_oid_with_context_1()
sha1-name.c: remove the_repo from resolve_relative_path()
sha1-name.c: remove the_repo from diagnose_invalid_index_path()
sha1-name.c: remove the_repo from handle_one_ref()
sha1-name.c: remove the_repo from get_oid_1()
sha1-name.c: remove the_repo from get_oid_basic()
sha1-name.c: remove the_repo from get_describe_name()
sha1-name.c: remove the_repo from get_oid_oneline()
sha1-name.c: add repo_interpret_branch_name()
sha1-name.c: remove the_repo from interpret_branch_mark()
sha1-name.c: remove the_repo from interpret_nth_prior_checkout()
sha1-name.c: remove the_repo from get_short_oid()
sha1-name.c: add repo_for_each_abbrev()
sha1-name.c: store and use repo in struct disambiguate_state
sha1-name.c: add repo_find_unique_abbrev_r()
...
|
|
Running "git add" on a repository created inside the current
repository is an explicit indication that the user wants to add it
as a submodule, but when the HEAD of the inner repository is on an
unborn branch, it cannot be added as a submodule. Worse, the files
in its working tree can be added as if they are a part of the outer
repository, which is not what the user wants. These problems are
being addressed.
* km/empty-repo-is-still-a-repo:
add: error appropriately on repository with no commits
dir: do not traverse repositories with no commits
submodule: refuse to add repository with no commits
|
|
An underallocation in the code to read the untracked cache
extension has been corrected.
* js/untracked-cache-allocfix:
untracked cache: fix off-by-one
|
|
Conversion from unsigned char[20] to struct object_id continues.
* bc/hash-transition-16: (35 commits)
gitweb: make hash size independent
Git.pm: make hash size independent
read-cache: read data in a hash-independent way
dir: make untracked cache extension hash size independent
builtin/difftool: use parse_oid_hex
refspec: make hash size independent
archive: convert struct archiver_args to object_id
builtin/get-tar-commit-id: make hash size independent
get-tar-commit-id: parse comment record
hash: add a function to lookup hash algorithm by length
remote-curl: make hash size independent
http: replace sha1_to_hex
http: compute hash of downloaded objects using the_hash_algo
http: replace hard-coded constant with the_hash_algo
http-walker: replace sha1_to_hex
http-push: remove remaining uses of sha1_to_hex
http-backend: allow 64-character hex names
http-push: convert to use the_hash_algo
builtin/pull: make hash-size independent
builtin/am: make hash size independent
...
|
|
The code which parses untracked-cache extensions from disk keeps a "len"
variable, which is the size of the string we are parsing. But since we
now have an "end of string" variable, we can just use that to get the
length when we need it. This eliminates the need to keep "len" up to
date (and removes the possibility of any errors where "len" and "eos"
get out of sync).
As a bonus, it means we are not storing a string length in an "int",
which is a potential source of overflows (though in this case it seems
fairly unlikely for that to cause any memory problems).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we parse an on-disk untracked cache, we have two pointers, "data"
and "next". As we parse, we point "next" to the end of an element, and
then later update "data" to match.
But we actually don't need two pointers. Each parsing step can just
update "data" directly from other variables we hold (and we don't have
to worry about bailing in an intermediate state, since any parsing
failure causes us to immediately discard "data" and return).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The on-disk format for the untracked-cache extension contains
NUL-terminated filenames. We parse these from the mmap'd file using
string functions like strlen(). This works fine in the normal case, but
if we see a malformed or corrupted index, we might read off the end of
our mmap.
Instead, let's use memchr() to find the trailing NUL within the bytes we
know are available, and return an error if it's missing.
Note that we can further simplify by folding another range check into
our conditional. After we find the end of the string, we set "next" to
the byte after the string and treat it as an error if there are no such
bytes left. That saves us from having to do a range check at the
beginning of each subsequent string (and works because there is always
data after each string). We can do both range checks together by
checking "!eos" (we didn't find a NUL) and "eos == end" (it was on the
last available byte, meaning there's nothing after). This replaces the
existing "next > end" checks.
Note also that the decode_varint() calls have a similar problem (we
don't even pass them "end"; they just keep parsing). These are probably
OK in practice since varints have a finite length (we stop parsing when
we'd overflow a uintmax_t), so the worst case is that we'd overflow into
reading the trailing bytes of the index.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In f9e6c649589e (untracked cache: load from UNTR index extension,
2015-03-08), code was added to read back the untracked cache from an
index extension.
Probably in the endeavor to avoid the `calloc()` implied by
`FLEX_ALLOC_STR()` (it is hard to know why exactly, the commit message
of that commit is a bit parsimonious with information), it calls
`malloc()` manually and then `memcpy()`s the bits and pieces into place.
It allocates the size of `struct untracked_cache_dir` plus the string
length of the untracked file name, then copies the information in two
steps: first the fixed-size metadata, then the name. And here lies the
rub: it includes the trailing NUL byte in the name.
If `FLEX_ARRAY` is defined as 0, this results in a buffer overrun.
To fix this, let's just add 1, for the trailing NUL byte. Technically,
this overallocates on platforms where `FLEX_ARRAY` is 1, but it should
not matter much in reality, as `malloc()` usually overallocates anyway,
unless the size to allocate aligns exactly with some internal chunk size
(see below for more on that).
The real strange thing is that neither valgrind nor DrMemory catches
this bug. In this developer's tests, a `memcpy()` (but not a
`memset()`!) could write up to 4 bytes after the allocated memory range
before valgrind would start reporting an issue.
However, when running Git built with nedmalloc as allocator, under rare
conditions (and inconsistently at that), this bug triggered an `abort()`
because nedmalloc rounds up the size to be `malloc()`ed to a multiple of
a certain chunk size, then adds a few bytes to be used for storing some
internal state. If there is no rounding up to do (because the size is
already a multiple of that chunk size), and if the buffer is overrun as
in the code patched in this commit, the internal state is corrupted.
The scenario that triggered this here bug fix entailed a git.git
checkout with an extra copy of the source code in an untracked
subdirectory, meaning that there was an untracked subdirectory called
"thunderbird-patch-inline" whose name's length is exactly 24 bytes,
which, added to the size of above-mentioned `struct untracked_cache_dir`
that weighs in with 104 bytes on a 64-bit system, amounts to 128,
aligning perfectly with nedmalloc's chunk size.
As there is no obvious way to trigger this bug reliably, on all
platforms supported by Git, and as the bug is obvious enough, this patch
comes without a regression test.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When treat_directory() encounters a directory that is not in the index
and DIR_NO_GITLINKS is unset, it calls resolve_gitlink_ref() to decide
if a directory looks like a repository, in which case the directory
won't be traversed. As a result, 'status -uall' and 'ls-files -o'
will show only the directory, even when there are untracked files
within the directory.
For the unusual case where a repository doesn't have a commit checked
out, resolve_gitlink_ref() returns -1 because HEAD cannot be resolved,
and the directory is treated as a normal directory (i.e. traversal
does not stop at the repository boundary). The status and ls-files
commands above list untracked files within the repository rather than
showing only the top-level directory. And if 'git add' is called on a
repository with no commit checked out, any untracked files under the
repository are added as blobs in the top-level project, a behavior
that is unlikely to be what the caller intended.
The above case is a corner case in an already unusual situation of the
working tree containing a repository that is not a tracked submodule,
but we might as well treat anything that looks like a repository
consistently. Loosen the "looks like a repository" criteria in
treat_directory() by replacing resolve_gitlink_ref() with
is_nonbare_repository_dir(), one of the checks that is performed
downstream when resolve_gitlink_ref() is called.
As the required update to t3700-add shows, calling 'git add' on a
repository with no commit checked out will now raise an error. While
this is the desired behavior, note that the output isn't yet
appropriate. The next commit will improve this output.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of using a struct with a flex array member to read and write the
untracked cache extension, use a shorter, fixed-length struct and add
the name and hash data explicitly.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This hasn't been used since 17ddc66e70 (convert report_path_error to
take struct pathspec, 2013-07-14), as the names in the struct will have
already been prefixed when they were parsed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The assumption to work on the single "in-core index" instance has
been reduced from the library-ish part of the codebase.
* nd/the-index-final:
cache.h: flip NO_THE_INDEX_COMPATIBILITY_MACROS switch
read-cache.c: remove the_* from index_has_changes()
merge-recursive.c: remove implicit dependency on the_repository
merge-recursive.c: remove implicit dependency on the_index
sha1-name.c: remove implicit dependency on the_index
read-cache.c: replace update_index_if_able with repo_&
read-cache.c: kill read_index()
checkout: avoid the_index when possible
repository.c: replace hold_locked_index() with repo_hold_locked_index()
notes-utils.c: remove the_repository references
grep: use grep_opt->repo instead of explict repo argument
|
|
By default, index compat macros are off from now on, because they
could hide the_index dependency.
Only those in builtin can use it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function will be reused for matching attributes in pathspec when
walking trees (currently it's used for matching pathspec when walking
a list). pathspec.c would be a more neutral place for this.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The pathspec code always takes names to be matched as a
name/namelen pair, but match_attrs() never looks at namelen,
and just treats "name" like a NUL-terminated string, passing
it to git_check_attr().
This usually works anyway. Every caller passes a
NUL-terminated string, and in all but one the passed-in
length is the same as the length of the string (the
exception is dir_path_match(), which may pass a smaller
length to drop a trailing slash). So we won't currently ever
read random memory, and the one case I found actually
happens to work correctly because the attr code can handle
the trailing slash itself.
But it's still worth addressing, as the function interface
implies that the name does not have to be NUL-terminated,
making this an accident waiting to happen.
Since teaching git_check_attr() to take a ptr/len pair would
be a big refactor, we'll just allocate a new string. We can
do this only when necessary, which avoids paying the cost
for most callers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
spatch transformation to replace boolean uses of !hashcmp() to
newly introduced oideq() is added, and applied, to regain
performance lost due to support of multiple hash algorithms.
* jk/cocci:
show_dirstat: simplify same-content check
read-cache: use oideq() in ce_compare functions
convert hashmap comparison functions to oideq()
convert "hashcmp() != 0" to "!hasheq()"
convert "oidcmp() != 0" to "!oideq()"
convert "hashcmp() == 0" to hasheq()
convert "oidcmp() == 0" to oideq()
introduce hasheq() and oideq()
coccinelle: use <...> for function exclusion
|
|
The unpack_trees() API used in checking out a branch and merging
walks one or more trees along with the index. When the cache-tree
in the index tells us that we are walking a tree whose flattened
contents is known (i.e. matches a span in the index), as linearly
scanning a span in the index is much more efficient than having to
open tree objects recursively and listing their entries, the walk
can be optimized, which is done in this topic.
* nd/unpack-trees-with-cache-tree:
Document update for nd/unpack-trees-with-cache-tree
cache-tree: verify valid cache-tree in the test suite
unpack-trees: add missing cache invalidation
unpack-trees: reuse (still valid) cache-tree from src_index
unpack-trees: reduce malloc in cache-tree walk
unpack-trees: optimize walking same trees with cache-tree
unpack-trees: add performance tracing
trace.h: support nested performance tracing
|
|
This is the flip side of the previous two patches: checking
for a non-zero oidcmp() can be more strictly expressed as
inequality. Like those patches, we write "!= 0" in the
coccinelle transformation, which covers by isomorphism the
more common:
if (oidcmp(E1, E2))
As with the previous two patches, this patch can be achieved
almost entirely by running "make coccicheck"; the only
differences are manual line-wrap fixes to match the original
code.
There is one thing to note for anybody replicating this,
though: coccinelle 1.0.4 seems to miss the case in
builtin/tag.c, even though it's basically the same as all
the others. Running with 1.0.7 does catch this, so
presumably it's just a coccinelle bug that was fixed in the
interim.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The more library-ish parts of the codebase learned to work on the
in-core index-state instance that is passed in by their callers,
instead of always working on the singleton "the_index" instance.
* nd/no-the-index: (24 commits)
blame.c: remove implicit dependency on the_index
apply.c: remove implicit dependency on the_index
apply.c: make init_apply_state() take a struct repository
apply.c: pass struct apply_state to more functions
resolve-undo.c: use the right index instead of the_index
archive-*.c: use the right repository
archive.c: avoid access to the_index
grep: use the right index instead of the_index
attr: remove index from git_attr_set_direction()
entry.c: use the right index instead of the_index
submodule.c: use the right index instead of the_index
pathspec.c: use the right index instead of the_index
unpack-trees: avoid the_index in verify_absent()
unpack-trees: convert clear_ce_flags* to avoid the_index
unpack-trees: don't shadow global var the_index
unpack-trees: add a note about path invalidation
unpack-trees: remove 'extern' on function declaration
ls-files: correct index argument to get_convert_attr_ascii()
preload-index.c: use the right index instead of the_index
dir.c: remove an implicit dependency on the_index in pathspec code
...
|
|
Performance measurements are listed right now as a flat list, which is
fine when we measure big blocks. But when we start adding more and
more measurements, some of them could be just part of a bigger
measurement and a flat list gives a wrong impression that they are
executed at the same level instead of nested.
Add trace_performance_enter() and trace_performance_leave() to allow
indent these nested measurements. For now it does not help much
because the only nested thing is (lazy) name hash initialization
(e.g. called in diff-index from "git status"). This will help more
because I'm going to add some more tracing that's actually nested.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many more strings are prepared for l10n.
* nd/i18n: (23 commits)
transport-helper.c: mark more strings for translation
transport.c: mark more strings for translation
sha1-file.c: mark more strings for translation
sequencer.c: mark more strings for translation
replace-object.c: mark more strings for translation
refspec.c: mark more strings for translation
refs.c: mark more strings for translation
pkt-line.c: mark more strings for translation
object.c: mark more strings for translation
exec-cmd.c: mark more strings for translation
environment.c: mark more strings for translation
dir.c: mark more strings for translation
convert.c: mark more strings for translation
connect.c: mark more strings for translation
config.c: mark more strings for translation
commit-graph.c: mark more strings for translation
builtin/replace.c: mark more strings for translation
builtin/pack-objects.c: mark more strings for translation
builtin/grep.c: mark strings for translation
builtin/config.c: mark more strings for translation
...
|
|
Make the match_patchspec API and friends take an index_state instead
of assuming the_index in dir.c. All external call sites are converted
blindly to keep the patch simple and retain current behavior.
Individual call sites may receive further updates to use the right
index instead of the_index.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the attr API take an index_state instead of assuming the_index in
attr code. All call sites are converted blindly to keep the patch
simple and retain current behavior. Individual call sites may receive
further updates to use the right index instead of the_index.
There is one ugly temporary workaround added in attr.c that needs some
more explanation.
Commit c24f3abace (apply: file commited with CRLF should roundtrip
diff and apply - 2017-08-19) forces one convert_to_git() call to NOT
read the index at all. But what do you know, we read it anyway by
falling back to the_index. When "istate" from convert_to_git is now
propagated down to read_attr_from_array() we will hit segfault
somewhere inside read_blob_data_from_index.
The right way of dealing with this is to kill "use_index" variable and
only follow "istate" but at this stage we are not ready for that:
while most git_attr_set_direction() calls just passes the_index to be
assigned to use_index, unpack-trees passes a different one which is
used by entry.c code, which has no way to know what index to use if we
delete use_index. So this has to be done later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many messages will be marked for translation in the following
commits. This commit updates some of them to be more consistent and
reduce diff noise in those commits. Changes are
- keep the first letter of die(), error() and warning() in lowercase
- no full stop in die(), error() or warning() if it's single sentence
messages
- indentation
- some messages are turned to BUG(), or prefixed with "BUG:" and will
not be marked for i18n
- some messages are improved to give more information
- some messages are broken down by sentence to be i18n friendly
(on the same token, combine multiple warning() into one big string)
- the trailing \n is converted to printf_ln if possible, or deleted
if not redundant
- errno_errno() is used instead of explicit strerror()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc updates.
* tz/exclude-doc-smallfixes:
dir.c: fix typos in core.excludesfile comment
gitignore.txt: clarify default core.excludesfile path
|
|
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
|
|
Make it easier to find references to core.excludesfile and the default
$XDG_CONFIG_HOME/git/ignore path.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code to read compressed bitmap was not careful to avoid reading
past the end of the file, which has been corrected.
* jk/ewah-bounds-check:
ewah: adjust callers of ewah_read_mmap()
ewah_read_mmap: bounds-check mmap reads
|
|
The return value of ewah_read_mmap() is now an ssize_t,
since we could (in theory) process up to 32GB of data. This
would never happen in practice, but a corrupt or malicious
.bitmap or index file could convince us to do so.
Let's make sure that we don't stuff the value into an int,
which would cause us to incorrectly move our pointer
forward. We'd always move too little, since negative values
are used for reporting errors. So the worst case is just
that we end up reporting a corrupt file, not an
out-of-bounds read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (42 commits)
merge-one-file: compute empty blob object ID
add--interactive: compute the empty tree value
Update shell scripts to compute empty tree object ID
sha1_file: only expose empty object constants through git_hash_algo
dir: use the_hash_algo for empty blob object ID
sequencer: use the_hash_algo for empty tree object ID
cache-tree: use is_empty_tree_oid
sha1_file: convert cached object code to struct object_id
builtin/reset: convert use of EMPTY_TREE_SHA1_BIN
builtin/receive-pack: convert one use of EMPTY_TREE_SHA1_HEX
wt-status: convert two uses of EMPTY_TREE_SHA1_HEX
submodule: convert several uses of EMPTY_TREE_SHA1_HEX
sequencer: convert one use of EMPTY_TREE_SHA1_HEX
merge: convert empty tree constant to the_hash_algo
builtin/merge: switch tree functions to use object_id
builtin/am: convert uses of EMPTY_TREE_SHA1_BIN to the_hash_algo
sha1-file: add functions for hex empty tree and blob OIDs
builtin/receive-pack: avoid hard-coded constants for push certs
diff: specify abbreviation size in terms of the_hash_algo
upload-pack: replace use of several hard-coded constants
...
|
|
* maint: (25 commits)
Git 2.17.1
Git 2.16.4
Git 2.15.2
Git 2.14.4
Git 2.13.7
fsck: complain when .gitmodules is a symlink
index-pack: check .gitmodules files with --strict
unpack-objects: call fsck_finish() after fscking objects
fsck: call fsck_finish() after fscking objects
fsck: check .gitmodules content
fsck: handle promisor objects in .gitmodules check
fsck: detect gitmodules files
fsck: actually fsck blob data
fsck: simplify ".git" check
index-pack: make fsck error message more specific
verify_path: disallow symlinks in .gitmodules
update-index: stat updated files earlier
verify_dotfile: mention case-insensitivity in comment
verify_path: drop clever fallthrough
skip_prefix: add case-insensitive variant
...
|
Junio C Hamano
Elijah Newren
Derrick Stolee
René Scharfe
Jeff King
Nguyễn Thái Ngọc Duy
Johannes Schindelin
Kyle Meyer
brian m. carlson
Todd Zullinger